Any idle task corresponding to an offline CPU is in an RCU Tasks Trace
quiescent state. This commit causes rcu_tasks_trace_postscan() to ignore
idle tasks for offline CPUs, which it can do safely due to CPU-hotplug
operations being disabled.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit replaces the pair of READ_ONCE(t->trc_reader_nesting) calls
with a single such call and a local variable. This makes the code's
intent more clear.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
Now that tasks are not removed from the list until they have responded to
any needed request for a quiescent state, it is no longer necessary to
wait for the trc_n_readers_need_end counter to go to zero. This commit
therefore removes that waiting code.
It is therefore also no longer necessary for rcu_tasks_trace_postgp() to
do the final decrement of this counter, so that code is also removed.
This in turn means that trc_n_readers_need_end counter itself can
be removed, as can the rcu_tasks_trace_iw irq_work structure and the
rcu_read_unlock_iw() function.
[ paulmck: Apply feedback from Zqiang. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit gets rid of the task_struct structure's ->trc_reader_checked
field, making it instead be a bit within the task_struct structure's
existing ->trc_reader_special.b.need_qs field. This commit also
atomically loads, stores, and checks the resulting combination of the
reader-checked and need-quiescent state flags. This will in turn allow
significant simplification of the rcu_tasks_trace_postgp() function
as well as elimination of the trc_n_readers_need_end counter in later
commits. These changes will in turn simplify later elimination of the
RCU Tasks Trace scan of the task list, which will make RCU Tasks Trace
grace periods less CPU-intensive.
[ paulmck: Apply kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: KP Singh <kpsingh@kernel.org>
This commit causes synchronous grace periods to be driven from the task
invoking synchronize_rcu_*(), allowing these functions to be invoked from
the mid-boot dead zone extending from when the scheduler was initialized
to to point that the various RCU tasks grace-period kthreads are spawned.
This change will allow the self-tests to run in a consistent manner.
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This is strictly a code-motion commit that moves the
synchronize_rcu_tasks_generic() down to where it can invoke
rcu_tasks_one_gp() without the need for a forward declaration.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit abstracts most of the rcu_tasks_kthread() function's loop
body into a new rcu_tasks_one_gp() function. It also introduces
a new ->tasks_gp_mutex to synchronize concurrent calls to this new
rcu_tasks_one_gp() function. This commit is preparation for allowing
RCU tasks grace periods to be driven by the calling task during the
mid-boot dead zone.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a debugging scan for callbacks that got lost during a
callback-queueing transition.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It is currently up to the caller to handle stale return values from
get_state_synchronize_rcu(). If poll_state_synchronize_rcu() returned
true once, a grace period has elapsed, regardless of the fact that counter
wrap might cause some future poll_state_synchronize_rcu() invocation to
return false. For example, the caller might store a separate flag that
indicates whether some previous call to poll_state_synchronize_rcu()
determined that the relevant grace period had already ended.
This approach works, but it requires extra storage and is easy to get
wrong. This commit therefore introduces a get_completed_synchronize_rcu()
that returns a cookie that causes poll_state_synchronize_rcu() to always
return true. This already-completed cookie can be stored in place of the
cookie that previously caused poll_state_synchronize_rcu() to return true.
It can also be used to flag a given structure as not having been exposed
to readers, and thus not requiring a grace period to elapse.
This commit is in preparation for polled expedited grace periods.
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, poll_state_synchronize_rcu() uses rcu_seq_done() to check
whether the specified grace period has completed. However, rcu_seq_done()
does a simple comparison that reserves have of the sequence-number space
for uncompleted grace periods. This has the unfortunate side-effect
of not handling sequence-number wrap gracefully. Of course, one can
argue that if someone has already waited for half of the full range of
grace periods, they can wait for the other half, but why wait at all in
this case?
This commit therefore creates a rcu_seq_done_exact() that counts as
uncompleted only the two grace periods during which the sequence number
might have been handed out, while still being uncompleted. This way,
if sequence-number wrap happens to hit that range, at most two additional
grace periods need be waited for.
This commit is in preparation for polled expedited grace periods.
Link: https://lore.kernel.org/all/20220121142454.1994916-1-bfoster@redhat.com/
Link: https://docs.google.com/document/d/1RNKWW9jQyfjxw2E8dsXVTdvZYh0HnYeSHDKog9jhdN8/edit?usp=sharing
Cc: Brian Foster <bfoster@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This reverts commit 73867c8709 ("drm/i915/display: Remove check for
low voltage sku for max dp source rate"), which, on an i7-11850H iGPU
with a Thinkpad X1 Extreme Gen 4, attached to a LG LP160UQ1-SPB1
embedded panel, causes wild flickering glitching technicolor
pyrotechnics on resumption from suspend. The display shows strobing
colors in an utter disaster explosion of pantone, as though bombs were
dropped on the leprechauns at the base of the rainbow.
Rebooting the machine fixes the issue, presumably because the display is
initialized by firmware rather than by i915. Otherwise, the GPU appears
to work fine.
Bisection traced it back to this commit, which makes sense given the
issues.
Note: This re-opens, and puts back to the drawing board,
https://gitlab.freedesktop.org/drm/intel/-/issues/5272 which was fixed
by the regressing commit.
Fixes: 73867c8709 ("drm/i915/display: Remove check for low voltage sku for max dp source rate")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220613102241.9236-1-Jason@zx2c4.com
Make sure to free the platform device in the unlikely event that
registration fails.
Fixes: 7a67832c7e ("libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20220620140723.9810-1-johan@kernel.org
There are some functions that were missed by commit d77e745613 ("regmap:
Add bulk read/write callbacks into regmap_config") when support to define
bulk read/write callbacks in regmap_config was introduced.
The regmap_bulk_write() and regmap_noinc_write() functions weren't changed
to use the added map->write instead of the map->bus->write handler.
Also, the regmap_can_raw_write() was not modified to take map->write into
account. So will only return true if a bus with a .write callback is set.
Fixes: d77e745613 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220616073435.1988219-4-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before adding support to define bulk read/write callbacks in regmap_config
by the commit d77e745613 ("regmap: Add bulk read/write callbacks into
regmap_config"), the regmap_noinc_read() function returned an errno early
a map->bus->read callback wasn't set.
But that commit dropped the check and now a call to _regmap_raw_read() is
attempted even when bulk read operations are not supported. That function
checks for map->read anyways but there's no point to continue if the read
can't succeed.
Also is a fragile assumption to make so is better to make it fail earlier.
Fixes: d77e745613 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220616073435.1988219-3-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support for drivers to define bulk read/write callbacks in regmap_config
was introduced by the commit d77e745613 ("regmap: Add bulk read/write
callbacks into regmap_config"), but this commit wrongly dropped a check
in regmap_bulk_read() to determine whether bulk reads can be done or not.
Before that commit, it was checked if map->bus was set. Now has to check
if a map->read callback has been set.
Fixes: d77e745613 ("regmap: Add bulk read/write callbacks into regmap_config")
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220616073435.1988219-2-javierm@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Explicitly do all setup at every stage of the Hyper-V Features test, e.g.
set the MSR/hypercall, enable capabilities, etc... Now that the VM is
recreated for every stage, values that are written into the VM's address
space, i.e. shared with the guest, are reset between sub-tests, as are
any capabilities, etc...
Fix the hypercall params as well, which were broken in the same rework.
The "hcall" struct/pointer needs to point at the hcall_params object, not
the set of hypercall pages.
The goofs were hidden by the test's dubious behavior of using '0' to
signal "done", i.e. the MSR test ran exactly one sub-test, and the
hypercall test was a gigantic nop.
Fixes: 6c1186430a ("KVM: selftests: Avoid KVM_SET_CPUID2 after KVM_RUN in hyperv_features test")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220608224516.3788274-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add x86-64 support for exception fixup on single instructions, without
forcing tests to install their own fault handlers. Use registers r9-r11
to flag the instruction as "safe" and pass fixup/vector information,
i.e. introduce yet another flavor of fixup (versus the kernel's in-memory
tables and KUT's per-CPU area) to take advantage of KVM sefltests being
64-bit only.
Using only registers avoids the need to allocate fixup tables, ensure
FS or GS base is valid for the guest, ensure memory is mapped into the
guest, etc..., and also reduces the potential for recursive faults due to
accessing memory.
Providing exception fixup trivializes tests that just want to verify that
an instruction faults, e.g. no need to track start/end using global
labels, no need to install a dedicated handler, etc...
Deliberately do not support #DE in exception fixup so that the fixup glue
doesn't need to account for a fault with vector == 0, i.e. the vector can
also indicate that a fault occurred. KVM injects #DE only for esoteric
emulation scenarios, i.e. there's very, very little value in testing #DE.
Force any test that wants to generate #DEs to install its own handler(s).
Use kvm_pv_test as a guinea pig for the new fixup, as it has a very
straightforward use case of wanting to verify that RDMSR and WRMSR fault.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220608224516.3788274-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a quirk for KVM's behavior of emulating intercepted MONITOR/MWAIT
instructions a NOPs regardless of whether or not they are supported in
guest CPUID. KVM's current behavior was likely motiviated by a certain
fruity operating system that expects MONITOR/MWAIT to be supported
unconditionally and blindly executes MONITOR/MWAIT without first checking
CPUID. And because KVM does NOT advertise MONITOR/MWAIT to userspace,
that's effectively the default setup for any VMM that regurgitates
KVM_GET_SUPPORTED_CPUID to KVM_SET_CPUID2.
Note, this quirk interacts with KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT. The
behavior is actually desirable, as userspace VMMs that want to
unconditionally hide MONITOR/MWAIT from the guest can leave the
MISC_ENABLE quirk enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220608224516.3788274-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ignore host userspace writes of '0' to F15H_PERF_CTL MSRs KVM reports
in the MSR-to-save list, but the MSRs are ultimately unsupported. All
MSRs in said list must be writable by userspace, e.g. if userspace sends
the list back at KVM without filtering out the MSRs it doesn't need.
Note, reads of said MSRs already have the desired behavior.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220611005755.753273-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ignore host userspace reads and writes of '0' to PEBS and BTS MSRs that
KVM reports in the MSR-to-save list, but the MSRs are ultimately
unsupported. All MSRs in said list must be writable by userspace, e.g.
if userspace sends the list back at KVM without filtering out the MSRs it
doesn't need.
Fixes: 8183a538cd ("KVM: x86/pmu: Add IA32_DS_AREA MSR emulation to support guest DS")
Fixes: 902caeb684 ("KVM: x86/pmu: Add PEBS_DATA_CFG MSR emulation to support adaptive PEBS")
Fixes: c59a1f106f ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220611005755.753273-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vcpu_get_perf_capabilities() when querying MSR_IA32_PERF_CAPABILITIES
from the guest's perspective, e.g. to update the vPMU and to determine
which MSRs exist. If userspace ignores MSR_IA32_PERF_CAPABILITIES but
clear X86_FEATURE_PDCM, the guest should see '0'.
Fixes: 902caeb684 ("KVM: x86/pmu: Add PEBS_DATA_CFG MSR emulation to support adaptive PEBS")
Fixes: c59a1f106f ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220611005755.753273-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Revert the hack to allow host-initiated accesses to all "PMU" MSRs,
as intel_is_valid_msr() returns true for _all_ MSRs, regardless of whether
or not it has a snowball's chance in hell of actually being a PMU MSR.
That mostly gets papered over by the actual get/set helpers only handling
MSRs that they knows about, except there's the minor detail that
kvm_pmu_{g,s}et_msr() eat reads and writes when the PMU is disabled.
I.e. KVM will happy allow reads and writes to _any_ MSR if the PMU is
disabled, either via module param or capability.
This reverts commit d1c88a4020.
Fixes: d1c88a4020 ("KVM: x86: always allow host-initiated writes to PMU MSRs")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220611005755.753273-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Eating reads and writes to all "PMU" MSRs when there is no PMU is wildly
broken as it results in allowing accesses to _any_ MSR on Intel CPUs
as intel_is_valid_msr() returns true for all host_initiated accesses.
A revert of commit d1c88a4020 ("KVM: x86: always allow host-initiated
writes to PMU MSRs") will soon follow.
This reverts commit 8e6a58e28b.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220611005755.753273-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not clear manipulate MSR_IA32_PERF_CAPABILITIES in intel_pmu_refresh(),
i.e. give userspace full control over capability/read-only MSRs. KVM is
not a babysitter, it is userspace's responsiblity to provide a valid and
coherent vCPU model.
Attempting to "help" the guest by forcing a consistent model creates edge
cases, and ironicially leads to inconsistent behavior.
Example #1: KVM doesn't do intel_pmu_refresh() when userspace writes
the MSR.
Example #2: KVM doesn't clear the bits when the PMU is disabled, or when
there's no architectural PMU.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220611005755.753273-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Give userspace full control of the read-only bits in MISC_ENABLES, i.e.
do not modify bits on PMU refresh and do not preserve existing bits when
userspace writes MISC_ENABLES. With a few exceptions where KVM doesn't
expose the necessary controls to userspace _and_ there is a clear cut
association with CPUID, e.g. reserved CR4 bits, KVM does not own the vCPU
and should not manipulate the vCPU model on behalf of "dummy user space".
The argument that KVM is doing userspace a favor because "the order of
setting vPMU capabilities and MSR_IA32_MISC_ENABLE is not strictly
guaranteed" is specious, as attempting to configure MSRs on behalf of
userspace inevitably leads to edge cases precisely because KVM does not
prescribe a specific order of initialization.
Example #1: intel_pmu_refresh() consumes and modifies the vCPU's
MSR_IA32_PERF_CAPABILITIES, and so assumes userspace initializes config
MSRs before setting the guest CPUID model. If userspace sets CPUID
first, then KVM will mark PEBS as available when arch.perf_capabilities
is initialized with a non-zero PEBS format, thus creating a bad vCPU
model if userspace later disables PEBS by writing PERF_CAPABILITIES.
Example #2: intel_pmu_refresh() does not clear PERF_CAP_PEBS_MASK in
MSR_IA32_PERF_CAPABILITIES if there is no vPMU, making KVM inconsistent
in its desire to be consistent.
Example #3: intel_pmu_refresh() does not clear MSR_IA32_MISC_ENABLE_EMON
if KVM_SET_CPUID2 is called multiple times, first with a vPMU, then
without a vPMU. While slightly contrived, it's plausible a VMM could
reflect KVM's default vCPU and then operate on KVM's copy of CPUID to
later clear the vPMU settings, e.g. see KVM's selftests.
Example #4: Enumerating an Intel vCPU on an AMD host will not call into
intel_pmu_refresh() at any point, and so the BTS and PEBS "unavailable"
bits will be left clear, without any way for userspace to set them.
Keep the "R" behavior of the bit 7, "EMON available", for the guest.
Unlike the BTS and PEBS bits, which are fully "RO", the EMON bit can be
written with a different value, but that new value is ignored.
Cc: Like Xu <likexu@tencent.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Message-Id: <20220611005755.753273-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge series from Javier Martinez Canillas <javierm@redhat.com>:
This series contains fixes for a few issues found while testing the recent
support for drivers to define bulk read/write callbacks in regmap_config.
I tested this with drivers/gpu/drm/solomon/ssd130x-spi.c, by converting it
to use this new API instead of defining its own regmap bus for bulk write.
Patch #1 and patch #2 are fixes for regresions introduced by that commit
and patch #3 adds regmap_config provided bulk write support to functions
regmap_noinc_write() and regmap_bulk_write(), that were missed.
Eight fixes, all in drivers (ufs, scsi_debug, storvsc, iscsi, ibmvfc).
Apart from the ufs command clearing updates, these are mostly minor
and obvious fixes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYrBbayYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQKMAP9WilSW
JKNlEf0HGBvL14QAKoeg7OpF9wzYA6Bzl8h3qwEAlgcudJOdNCspWIHMFWdCnFEV
oe25ZYfLhLazqs4oUsA=
=04cZ
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Eight fixes, all in drivers (ufs, scsi_debug, storvsc, iscsi, ibmvfc).
Apart from the ufs command clearing updates, these are mostly minor
and obvious fixes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ibmvfc: Store vhost pointer during subcrq allocation
scsi: ibmvfc: Allocate/free queue resource only during probe/remove
scsi: storvsc: Correct reporting of Hyper-V I/O size limits
scsi: ufs: Fix a race between the interrupt handler and the reset handler
scsi: ufs: Support clearing multiple commands at once
scsi: ufs: Simplify ufshcd_clear_cmd()
scsi: iscsi: Exclude zero from the endpoint ID range
scsi: scsi_debug: Fix zone transition to full condition
- Don't set data source if it's not a memory operation in ARM SPE (Statistical
Profiling Extensions).
- Fix handling of exponent floating point values in perf stat expressions.
- Don't leak fd on failure on libperf open.
- Fix 'perf test' CPU topology test for PPC guest systems.
- Fix undefined behaviour on breakpoint account 'perf test' entry.
- Record only user callchains on the "Check ARM64 callgraphs are complete in FP
mode" 'perf test' entry.
- Fix "perf stat CSV output linter" test on s390.
- Sync batch of kernel headers with tools/perf/.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYq93OQAKCRCyPKLppCJ+
Jy0RAQD+B7rvd/4VcbLY7hJkhH4h8C2J4Le59Owq3W8TZTTNDgEAupY1IDPnJlWZ
BxIkcRKh0+aB6tVGMKIASlWs3ugc+wQ=
=Ym7P
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.19-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool fixes from Arnaldo Carvalho de Melo:
- Don't set data source if it's not a memory operation in ARM SPE
(Statistical Profiling Extensions).
- Fix handling of exponent floating point values in perf stat
expressions.
- Don't leak fd on failure on libperf open.
- Fix 'perf test' CPU topology test for PPC guest systems.
- Fix undefined behaviour on breakpoint account 'perf test' entry.
- Record only user callchains on the "Check ARM64 callgraphs are
complete in FP mode" 'perf test' entry.
- Fix "perf stat CSV output linter" test on s390.
- Sync batch of kernel headers with tools/perf/.
* tag 'perf-tools-fixes-for-v5.19-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools headers UAPI: Sync linux/prctl.h with the kernel sources
perf metrics: Ensure at least 1 id per metric
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
perf arm-spe: Don't set data source if it's not a memory operation
perf expr: Allow exponents on floating point values
perf test topology: Use !strncmp(right platform) to fix guest PPC comparision check
perf test: Record only user callchains on the "Check Arm64 callgraphs are complete in fp mode" test
perf beauty: Update copy of linux/socket.h with the kernel sources
perf test: Fix variable length array undefined behavior in bp_account
libperf evsel: Open shouldn't leak fd on failure
perf test: Fix "perf stat CSV output linter" test on s390
perf unwind: Fix uninitialized variable
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEjUuTAak14xi+SF7M4CHKc/GJqRAFAmKwXZMACgkQ4CHKc/GJ
qRBZ+gf8C8JlLczNn8oTHZNthCqbe8BENLmI+CdFZ3+Gxijt4XHdS4AEWadcUo2O
m5ZoUNgLiAjChRSZNO4veib5zsERotDhOiOjkG8/ppf0p5WTNY50vQ0McXsndJ9K
IikInusZsyeJrANSi7SeN5vrODP6609SRQiLF+ZH0XrGDvzENHGU8CW0kYU3RsH4
c/Pf8zOMDPkbGsFJk/d/PXgr2dr5hPGz8KOrHI6S5DtY6ODyclx3WaELSGbq7xqz
PubVx2yItQS1nwBQQA9DmE2HZX1lqro50WlJDPDexZft/LBnTosPtdV9E1IC2OK0
JdFim9GClURNXS3xQoZjWFSNocTOvA==
=FgiZ
-----END PGP SIGNATURE-----
Merge tag 'slab-for-5.19-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- A slub fix for PREEMPT_RT locking semantics from Sebastian.
- A slub fix for state corruption due to a possible race scenario from
Jann.
* tag 'slab-for-5.19-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slub: add missing TID updates on slab deactivation
mm/slub: Move the stackdepot related allocation out of IRQ-off section.
Check vm_fault->pgoff before using it. When we removed the warning, we
also removed the check.
Fixes: 7b26e4e211 ("udmabuf: drop WARN_ON() check.")
Reported-by: zdi-disclosures@trendmicro.com
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we mark for reissue, we assume that the buffer will remain stable.
Hence if are using a provided buffer, we need to ensure that we stick
with it for the duration of that request.
This only affects block devices that use provided buffers, as those are
the only ones that get marked with REQ_F_REISSUE.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
PCI-specific power management (pci_driver.suspend and pci_driver.resume) is
deprecated. If drivers implement power management, they should use the
generic power management framework, not the PCI-specific hooks.
Convert the sample code to use the generic power management framework.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
PCI-specific power management (pci_driver.suspend and pci_driver.resume) is
deprecated. The cirrusfb driver has never implemented power management at
all, but if it ever does, it should use the generic power management
framework, not the PCI-specific hooks.
Remove the commented-out references to the PCI-specific power management
hooks.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Helge Deller <deller@gmx.de>
Variable stolen_size can be left uninitialized in a code path with
INTEL_855_GMCH_GMS_DISABLED. Fix this by initializing the variable to 0.
Also fix indentation of function arguments.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Aperture size for i9x5 variants is determined from PCI base address.
if (pci_resource_start(pdev, 2) & 0x08000000)
*aperture_size = MB(128);
...
This condition is incorrect as 128 MiB address can have the address
set as 0x?8000000 or 0x?0000000. Also the code can be simplified to just
use pci_resource_len().
The true settings of the aperture size is in the MSAC register, which
could be used instead. However the value is used only as an info message,
so it doesn't matter.
Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Add the nodes relevant to provide clocks for Exynos7885 eMMC and to
support eMMC. eMMC is the internal storage used in the Samsung Galaxy A8
(2018) (jackpotlte), and all other known devices using the Exynos7885
SoC.
Signed-off-by: David Virag <virag.david003@gmail.com>
Link: https://lore.kernel.org/r/20220601233743.56317-6-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Delete the redundant word 'an'.
The second "and" should not be deleted, but replaced by "an".
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Link: https://lore.kernel.org/r/20220610083924.32877-1-wangxiang@cdjrlc.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Select VIRTIO_MENU as it is needed by VIRTIO_MMIO.
Add an ending period at the end of the virt machine help message.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220531174514.1586248-1-laurent@vivier.eu
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
This commit adds the kernel config options needed to run the recently
added xdp_synproxy test. Users without these options will hit errors
like this:
test_synproxy:FAIL:iptables -t raw -I PREROUTING -i tmp1 -p
tcp -m tcp --syn --dport 8080 -j CT --notrack unexpected error: 256
(errno 22)
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220620104939.4094104-1-maximmi@nvidia.com
We always allocate skmsg with kzalloc(), so there is no need
to call memset(0) on it, the only thing we need from
sk_msg_init() is sg_init_marker(). So introduce a new helper
which is just kzalloc()+sg_init_marker(), this saves an
unncessary memset(0) for skmsg on fast path.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220615162014.89193-5-xiyou.wangcong@gmail.com
With ->read_skb() now we have an entire skb dequeued from
receive queue, now we just need to grab an addtional refcnt
before passing its ownership to recv actors.
And we should not touch them any more, particularly for
skb->sk. Fortunately, skb->sk is already set for most of
the protocols except UDP where skb->sk has been stolen,
so we have to fix it up for UDP case.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220615162014.89193-4-xiyou.wangcong@gmail.com
Currently both splice() and sockmap use ->read_sock() to
read skb from receive queue, but for sockmap we only read
one entire skb at a time, so ->read_sock() is too conservative
to use. Introduce a new proto_ops ->read_skb() which supports
this sematic, with this we can finally pass the ownership of
skb to recv actors.
For non-TCP protocols, all ->read_sock() can be simply
converted to ->read_skb().
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220615162014.89193-3-xiyou.wangcong@gmail.com
This patch inroduces tcp_read_skb() based on tcp_read_sock(),
a preparation for the next patch which actually introduces
a new sock ops.
TCP is special here, because it has tcp_read_sock() which is
mainly used by splice(). tcp_read_sock() supports partial read
and arbitrary offset, neither of them is needed for sockmap.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220615162014.89193-2-xiyou.wangcong@gmail.com
TREX D Core and P core clocks seem to be related to the BTS (Bus Traffic
Shaper) inside the Exynos7885 SoC, and are needed for the SoC to
function correctly.
Add indices for these clocks.
Signed-off-by: David Virag <virag.david003@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220601233743.56317-3-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
CMU_FSYS clock domain provides clocks for MMC (MMC_CARD, MMC_EMBD,
MMC_SDIO), and USB30DRD.
Add clock indices and bindings documentation for CMU_FSYS domain.
Signed-off-by: David Virag <virag.david003@gmail.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220601233743.56317-2-virag.david003@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The topcliff-pch driver requires TX and RX buffers on all transfers, open
coding checks for this. Remove those open coded checks and instead rely on
the core functionality, which has the added bonus that it will fix up any
transfers submitted by drivers as needed rather than erroring out.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220615174138.4060912-1-broonie@kernel.org
