When adjusting the PTP clock, the base time of the TAS configuration
will become unreliable. We need reset the TAS configuration by using a
new base time.
For example, if the driver gets a base time 0 of Qbv configuration from
user, and current time is 20000. The driver will set the TAS base time
to be 20000. After the PTP clock adjustment, the current time becomes
10000. If the TAS base time is still 20000, it will be a future time,
and TAS entry list will stop running. Another example, if the current
time becomes to be 10000000 after PTP clock adjust, a large time offset
can cause the hardware to hang.
This patch introduces a tas_clock_adjust() function to reset the TAS
module by using a new base time after the PTP clock adjustment. This can
avoid issues above.
Due to PTP clock adjustment can occur at any time, it may conflict with
the TAS configuration. We introduce a new TAS lock to serialize the
access to the TAS registers.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
imx6ul is not compatible to imx6sx, both have different erratas.
Fixes the dt_binding_check warning:
spi@21e0000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-qspi', 'fsl,imx6sx-qspi'] is too long
Additional items are not allowed ('fsl,imx6sx-qspi' was unexpected)
'fsl,imx6ul-qspi' is not one of ['fsl,ls1043a-qspi']
'fsl,imx6ul-qspi' is not one of ['fsl,imx8mq-qspi']
'fsl,ls1021a-qspi' was expected
'fsl,imx7d-qspi' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In yaml binding "fsl,imx6ul-lcdif" is listed as compatible to imx6sx-lcdif,
but not imx28-lcdif. Change the list accordingly. Fixes the
dt_binding_check warning:
lcdif@21c8000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-lcdif', 'fsl,imx28-lcdif'] is too long
Additional items are not allowed ('fsl,imx28-lcdif' was unexpected)
'fsl,imx6ul-lcdif' is not one of ['fsl,imx23-lcdif', 'fsl,imx28-lcdif',
'fsl,imx6sx-lcdif']
'fsl,imx6sx-lcdif' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
"fsl,imx6ul-csi" was never listed as compatible to "fsl,imx7-csi", neither
in yaml bindings, nor previous txt binding. Remove the imx7 part. Fixes
the dt schema check warning:
csi@21c4000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-csi', 'fsl,imx7-csi'] is too long
Additional items are not allowed ('fsl,imx7-csi' was unexpected)
'fsl,imx8mm-csi' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to binding, the compatible shall only contain imx6ul and imx21
compatibles. Fixes the dt_binding_check warning:
keypad@20b8000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-kpp', 'fsl,imx6q-kpp', 'fsl,imx21-kpp'] is too long
Additional items are not allowed ('fsl,imx6q-kpp', 'fsl,imx21-kpp' were
unexpected)
Additional items are not allowed ('fsl,imx21-kpp' was unexpected)
'fsl,imx21-kpp' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
operating-points is a uint32-matrix as per opp-v1.yaml. Change it
accordingly. While at it, change fsl,soc-operating-points as well,
although there is no bindings file (yet). But they should have the same
format. Fixes the dt_binding_check warning:
cpu@0: operating-points:0: [696000, 1275000, 528000, 1175000, 396000,
1025000, 198000, 950000] is too long
cpu@0: operating-points:0: Additional items are not allowed (528000,
1175000, 396000, 1025000, 198000, 950000 were unexpected)
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
All 3 properties are required by sram.yaml. Fixes the dtbs_check
warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
QCOM_SOCINFO depends on QCOM_SMEM but is not selected, this cause some
problems with QCOM_SOCINFO getting selected with the dependency of
QCOM_SMEM not met.
To fix this remove the select in Kconfig and add additional info in the
DWMAC_IPQ806X config description.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9ec092d2fe ("net: ethernet: stmmac: add missing sgmii configure for ipq806x")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The node names should be generic and DT schema expects certain pattern
with 'led'.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make debugging of power management issues easier by printing the reason
why a regulator fails to be enabled or disabled.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that the JR0 reservation is done in both upstream (v2.7) and
downstream (NXP lf_v2.4) TF-A versions, the kernel fails to initialize
the job ring 0:
# dmesg | grep jr
caam_jr 30901000.jr: failed to flush job ring 0
caam_jr: probe of 30901000.jr failed with error -5
Disable the sec_jr0 nodes by default to avoid the caam_jr probe error.
Suggested-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
Reviewed-by: Gaurav Jain <gaurav.jain@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
usdhc2 is connected to a Wifi chip that is powered by a 3.3V supply.
Pass the "no-1-8-v" property to guarantee that no communication is
made at 1.8V.
While at it, also remove the unnecessary properties: "cap-sd-highspeed",
"sd-uhs-ddr50", and "mmc-ddr-1_8v".
Fixes: 9ac0ae97e3 ("ARM: dts: imx7d-smegw01: Add support for i.MX7D SMEGW01 board")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The proper name is cpu0-thermal, not cpu-thermal0, so change it to that.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Update the mx25_read_cpu_rev function to recognize silicon revision 1.2
for imx25 chipsets.
Silicon revision 1.2 is mentioned in the errata document at
https://www.nxp.com/docs/en/errata/IMX25CE.pdf. The imx25 chips on my
test boards show revision 1.2 as well.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The bootargs line is already commented out and the comment of UART4
does not apply, as uart4 node is not described.
Remove both comments to make the dtsi cleaner.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
or error injection. Also fix up how test_dummy_encryption mount
option is handled for the new mount API. Finally, fix/cleanup a
number of comments and ext4 Documentation files.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmKuYpcACgkQ8vlZVpUN
gaMXwwf8DSHJ3gI2Lo0wrzJm7KSS0C+HK29/rtLCZdxECQsZR156ZzSF3zAFKOwK
Yx3RJwiFxrciUUytY/MWTyalCk+M8oW1093SfRqNNZCbZNi33acnbTqioa7INnDw
snFGGEU1y0M0AUduxNWPr71P80sTyQa0ZplIc4YeR98zzMvoWgi1dvo4wNdtJNQb
Gb0FtBhgP+IeK50eBlK4O0Eg5kqd0V5OeTLUYUfsWqU28ap8dHYE48I6sIdHx6az
sa6b2+YRuBxJUV61FNujuVtkDgUHXtXM97kkGpywRSLjo4iFxlQvX9Ew4lBD9RDI
b0YHVzK/DU9M3VfiYgzGwShCb/M68w==
=NtNY
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a variety of bugs, many of which were found by folks using fuzzing
or error injection.
Also fix up how test_dummy_encryption mount option is handled for the
new mount API.
Finally, fix/cleanup a number of comments and ext4 Documentation
files"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix a doubled word "need" in a comment
ext4: add reserved GDT blocks check
ext4: make variable "count" signed
ext4: correct the judgment of BUG in ext4_mb_normalize_request
ext4: fix bug_on ext4_mb_use_inode_pa
ext4: fix up test_dummy_encryption handling for new mount API
ext4: use kmemdup() to replace kmalloc + memcpy
ext4: fix super block checksum incorrect after mount
ext4: improve write performance with disabled delalloc
ext4: fix warning when submitting superblock in ext4_commit_super()
ext4, doc: remove unnecessary escaping
ext4: fix incorrect comment in ext4_bio_write_page()
fs: fix jbd2_journal_try_to_free_buffers() kernel-doc comment
-----BEGIN PGP SIGNATURE-----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=oBRl
-----END PGP SIGNATURE-----
Merge tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client fixes from Steve French:
"Two cifs debugging improvements - one found to deal with debugging a
multichannel problem and one for a recent fallocate issue
This does include the two larger multichannel reconnect (dynamically
adjusting interfaces on reconnect) patches, because we recently found
an additional problem with multichannel to one server type that I want
to include at the same time"
* tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: when a channel is not found for server, log its connection id
smb3: add trace point for SMB2_set_eof
Skov's i.MX6 based boards come in different flavors which have different panels
attached. For optimal contrast experience each panel type needs an individual
common voltage (VCOM) to drive its TFT backplane. The latter is generated by an
LCD bias supply IC controlled by a pwm as input signal. Introduce a pwm-
regulator to describe this hardware property and parameterize it appropriately
for the different boards.
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
========
BUG: kernel NULL pointer dereference, address: 0000000000000028
CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
...
RIP: 0010:ext4_flex_group_add+0xe08/0x2570
...
Call Trace:
<TASK>
ext4_resize_fs+0xbec/0x1660
__ext4_ioctl+0x1749/0x24e0
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xa6/0x110
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2dd739617b
========
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled.
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220601092717.763694-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to
be a signed integer so we can correctly check for an error code returned
by dx_make_map().
Fixes: 46c116b920 ("ext4: verify dir block before splitting it")
Cc: stable@kernel.org
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220530100047.537598-1-dingxiang@cmss.chinamobile.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ext4_mb_normalize_request() can move logical start of allocated blocks
to reduce fragmentation and better utilize preallocation. However logical
block requested as a start of allocation (ac->ac_o_ex.fe_logical) should
always be covered by allocated blocks so we should check that by
modifying and to or in the assertion.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Hulk Robot reported a BUG_ON:
==================================================================
kernel BUG at fs/ext4/mballoc.c:3211!
[...]
RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f
[...]
Call Trace:
ext4_mb_new_blocks+0x9df/0x5d30
ext4_ext_map_blocks+0x1803/0x4d80
ext4_map_blocks+0x3a4/0x1a10
ext4_writepages+0x126d/0x2c30
do_writepages+0x7f/0x1b0
__filemap_fdatawrite_range+0x285/0x3b0
file_write_and_wait_range+0xb1/0x140
ext4_sync_file+0x1aa/0xca0
vfs_fsync_range+0xfb/0x260
do_fsync+0x48/0xa0
[...]
==================================================================
Above issue may happen as follows:
-------------------------------------
do_fsync
vfs_fsync_range
ext4_sync_file
file_write_and_wait_range
__filemap_fdatawrite_range
do_writepages
ext4_writepages
mpage_map_and_submit_extent
mpage_map_one_extent
ext4_map_blocks
ext4_mb_new_blocks
ext4_mb_normalize_request
>>> start + size <= ac->ac_o_ex.fe_logical
ext4_mb_regular_allocator
ext4_mb_simple_scan_group
ext4_mb_use_best_found
ext4_mb_new_preallocation
ext4_mb_new_inode_pa
ext4_mb_use_inode_pa
>>> set ac->ac_b_ex.fe_len <= 0
ext4_mb_mark_diskspace_used
>>> BUG_ON(ac->ac_b_ex.fe_len <= 0);
we can easily reproduce this problem with the following commands:
`fallocate -l100M disk`
`mkfs.ext4 -b 1024 -g 256 disk`
`mount disk /mnt`
`fsstress -d /mnt -l 0 -n 1000 -p 1`
The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP.
Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur
when the size is truncated. So start should be the start position of
the group where ac_o_ex.fe_logical is located after alignment.
In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP
is very large, the value calculated by start_off is more accurate.
Cc: stable@kernel.org
Fixes: cd648b8a8f ("ext4: trim allocation requests to group size")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220528110017.354175-2-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since ext4 was converted to the new mount API, the test_dummy_encryption
mount option isn't being handled entirely correctly, because the needed
fscrypt_set_test_dummy_encryption() helper function combines
parsing/checking/applying into one function. That doesn't work well
with the new mount API, which split these into separate steps.
This was sort of okay anyway, due to the parsing logic that was copied
from fscrypt_set_test_dummy_encryption() into ext4_parse_param(),
combined with an additional check in ext4_check_test_dummy_encryption().
However, these overlooked the case of changing the value of
test_dummy_encryption on remount, which isn't allowed but ext4 wasn't
detecting until ext4_apply_options() when it's too late to fail.
Another bug is that if test_dummy_encryption was specified multiple
times with an argument, memory was leaked.
Fix this up properly by using the new helper functions that allow
splitting up the parse/check/apply steps for test_dummy_encryption.
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20220526040412.173025-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
We got issue as follows:
[home]# mount /dev/sda test
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
[home]# dmesg
EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sda): Errors on filesystem, clearing orphan list.
EXT4-fs (sda): recovery complete
EXT4-fs (sda): mounted filesystem with ordered data mode. Quota mode: none.
[home]# debugfs /dev/sda
debugfs 1.46.5 (30-Dec-2021)
Checksum errors in superblock! Retrying...
Reason is ext4_orphan_cleanup will reset ‘s_last_orphan’ but not update
super block checksum.
To solve above issue, defer update super block checksum after
ext4_orphan_cleanup.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20220525012904.1604737-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
In machine_setup(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617115323.4046905-1-windhl@126.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In calibrate_ccount(), of_find_compatible_node() will return a node
pointer with refcount incremented. We should use of_node_put() when
it is not used anymore.
Cc: stable@vger.kernel.org
Signed-off-by: Liang He <windhl@126.com>
Message-Id: <20220617124432.4049006-1-windhl@126.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
cifs_ses_get_chan_index gets the index for a given server pointer.
When a match is not found, we warn about a possible bug.
However, printing details about the non-matching server could be
more useful to debug here.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Contrary to what the naming might suggest, devm_regulator_get_optional
returns -ENODEV in case the regulator is not found which will trigger
probe error in this driver.
Use devm_regulator_get instead which will return a dummy regulator that
we can just use as if it was a proper regulator.
Fixes: d3d6dba56d ("proximity: vl53l0x: Handle the VDD regulator")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20220614112049.302278-1-luca.weiss@fairphone.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Maintainers of the directory Documentation/devicetree/bindings/iio
are also the maintainers of the corresponding directory
include/dt-bindings/iio.
Add the file entry for include/dt-bindings/iio to the appropriate
section in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20220613115045.24326-1-lukas.bulwahn@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Align the example node address and reg content to be 0x2a for both.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220615233411.90621-1-marex@denx.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Display resolution change is implemented through drm modeset. Older
modeset (resolution) has to be disabled first before newer modeset
(resolution) can be enabled. Display disable will turn off both
pixel clock and main link clock so that main link have to be
re-trained during display enable to have new video stream flow
again. At current implementation, display enable function manually
kicks up irq_hpd_handle which will read panel link status and start
link training if link status is not in sync state.
However, there is rare case that a particular panel links status keep
staying in sync for some period of time after main link had been shut
down previously at display disabled. In this case, main link retraining
will not be executed by irq_hdp_handle(). Hence video stream of newer
display resolution will fail to be transmitted to panel due to main
link is not in sync between host and panel.
This patch will bypass irq_hpd_handle() in favor of directly call
dp_ctrl_on_stream() to always perform link training in regardless of
main link status. So that no unexpected exception resolution change
failure cases will happen. Also this implementation are more efficient
than manual kicking off irq_hpd_handle function.
Changes in v2:
-- set force_link_train flag on DP only (is_edp == false)
Changes in v3:
-- revise commit text
-- add Fixes tag
Changes in v4:
-- revise commit text
Changes in v5:
-- fix spelling at commit text
Changes in v6:
-- split dp_ctrl_on_stream() for phy test case
-- revise commit text for modeset
Changes in v7:
-- drop 0 assignment at local variable (ret = 0)
Changes in v8:
-- add patch to remove pixel_rate from dp_ctrl
Changes in v9:
-- forward declare dp_ctrl_on_stream_phy_test_report()
Fixes: 62671d2ef2 ("drm/msm/dp: fixes wrong connection state caused by failure of link train")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489895/
Link: https://lore.kernel.org/r/1655411200-7255-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
As explained in [1], using max_linewidth to limit the modes
does not seem to remove 4K modes on chipsets such as
sm8250 where the max_linewidth actually supports 4k.
This would have been alright if dual SSPP support was
present but otherwise fails the per SSPP bandwidth check.
The ideal way to implement this would be to filter out
the modes which will exceed the bandwidth check by computing
it.
But this would be an exhaustive solution till we have
dual SSPP support.
Let's instead use max_mixer_width to limit the modes.
max_mixer_width still remains 2560 on sm8250 so even if
the max_linewidth is 4096, the only way 4k modes could have
been supported is to have source split enabled on the SSPP.
Since source split support is not enabled yet in DPU driver,
enforce max_mixer_width as the upper limit on the modes.
[1] https://patchwork.freedesktop.org/patch/489662/
Fixes: e67dcecda0 ("drm/msm/dpu: limit writeback modes according to max_linewidth")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489893/
Link: https://lore.kernel.org/r/1655407606-21760-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
During msm initialize phase, dp_display_unbind() will be called to undo
initializations had been done by dp_display_bind() previously if there is
error happen at msm_drm_bind. In this case, core_initialized flag had to
be check to make sure clocks is on before update DP controller register
to disable HPD interrupts. Otherwise system will crash due to below NOC
fatal error.
QTISECLIB [01f01a7ad]CNOC2 ERROR: ERRLOG0_LOW = 0x00061007
QTISECLIB [01f01a7ad]GEM_NOC ERROR: ERRLOG0_LOW = 0x00001007
QTISECLIB [01f0371a0]CNOC2 ERROR: ERRLOG0_HIGH = 0x00000003
QTISECLIB [01f055297]GEM_NOC ERROR: ERRLOG0_HIGH = 0x00000003
QTISECLIB [01f072beb]CNOC2 ERROR: ERRLOG1_LOW = 0x00000024
QTISECLIB [01f0914b8]GEM_NOC ERROR: ERRLOG1_LOW = 0x00000042
QTISECLIB [01f0ae639]CNOC2 ERROR: ERRLOG1_HIGH = 0x00004002
QTISECLIB [01f0cc73f]GEM_NOC ERROR: ERRLOG1_HIGH = 0x00004002
QTISECLIB [01f0ea092]CNOC2 ERROR: ERRLOG2_LOW = 0x0009020c
QTISECLIB [01f10895f]GEM_NOC ERROR: ERRLOG2_LOW = 0x0ae9020c
QTISECLIB [01f125ae1]CNOC2 ERROR: ERRLOG2_HIGH = 0x00000000
QTISECLIB [01f143be7]GEM_NOC ERROR: ERRLOG2_HIGH = 0x00000000
QTISECLIB [01f16153a]CNOC2 ERROR: ERRLOG3_LOW = 0x00000000
QTISECLIB [01f17fe07]GEM_NOC ERROR: ERRLOG3_LOW = 0x00000000
QTISECLIB [01f19cf89]CNOC2 ERROR: ERRLOG3_HIGH = 0x00000000
QTISECLIB [01f1bb08e]GEM_NOC ERROR: ERRLOG3_HIGH = 0x00000000
QTISECLIB [01f1d8a31]CNOC2 ERROR: SBM1 FAULTINSTATUS0_LOW = 0x00000002
QTISECLIB [01f1f72a4]GEM_NOC ERROR: SBM0 FAULTINSTATUS0_LOW = 0x00000001
QTISECLIB [01f21a217]CNOC3 ERROR: ERRLOG0_LOW = 0x00000006
QTISECLIB [01f23dfd3]NOC error fatal
changes in v2:
-- drop the first patch (drm/msm: enable msm irq after all initializations are done successfully at msm_drm_init()) since the problem had been fixed by other patch
Fixes: 570d3e5d28 ("drm/msm/dp: stop event kernel thread when DP unbind")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488387/
Link: https://lore.kernel.org/r/1654538139-7450-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
of_graph_get_remote_node() returns remote device node pointer with
refcount incremented, we should use of_node_put() on it
when not need anymore.
Add missing of_node_put() to avoid refcount leak.
Fixes: 86418f90a4 ("drm: convert drivers to use of_graph_get_remote_node")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/488473/
Link: https://lore.kernel.org/r/20220607110841.53889-1-linmq006@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Prior to the last commit, this could result in setting the GPU
written fence value back to an older value, if we had missed
updating completed_fence prior to suspend. This was mostly
harmless as the GPU would eventually overwrite it again with
the correct value. But we should just not do this. Instead
just leave a sanity check that the fence looks plausible (in
case the GPU scribbled on memory).
Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 95d1deb02a ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Patchwork: https://patchwork.freedesktop.org/patch/490138/
Link: https://lore.kernel.org/r/20220618161120.3451993-2-robdclark@gmail.com
I noticed while looking at some traces, that we could miss calls to
msm_update_fence(), as the irq could have raced with retire_submits()
which could have already popped the last submit on a ring out of the
queue of in-flight submits. But walking the list of submits in the
irq handler isn't really needed, as dma_fence_is_signaled() will dtrt.
So lets just drop it entirely.
v2: use spin_lock_irqsave/restore as we are no longer protected by the
spin_lock_irqsave/restore() in update_fences()
Reported-by: Steev Klimaszewski <steev@kali.org>
Fixes: 95d1deb02a ("drm/msm/gem: Add fenced vma unpin")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Patchwork: https://patchwork.freedesktop.org/patch/490136/
Link: https://lore.kernel.org/r/20220618161120.3451993-1-robdclark@gmail.com
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.
Instead of making linker to drop a section, drop ACPI_PTR().
As a side effect this makes driver ACPI and OF clean.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220616142451.10322-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since cancel_delayed_work(&chip->poweroff_work) does not guarantee that
tsl2563_poweroff_work() is not running, tsl2563_set_power(chip, 0) can be
called from tsl2563_poweroff_work() after tsl2563_get_power(chip) and
tsl2563_set_power(chip, 1) are called. Use _sync version in order to make
sure that tsl2563_poweroff_work() is no longer running.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/041b6745-f784-ff3f-9836-3f4397d35d94@I-love.SAKURA.ne.jp
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit 9e61d90115 ("iio: light: tsl2563: Remove
flush_scheduled_work") replaced cancel_delayed_work() +
flush_scheduled_work() with cancel_delayed_work_sync() for only
tsl2563_probe() side.
Do the same thing for tsl2563_remove() side, which was added by
commit 388be48839 ("staging:iio: tsl2563 abi fixes and interrupt
handling").
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/3381176e-2f86-24ba-a8ba-c4ce8f416086@I-love.SAKURA.ne.jp
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
As a part of patch series about wrong trigger register() and get()
calls order in the some IIO drivers trigger initialization path:
https://lore.kernel.org/all/20220524181150.9240-1-ddrokosov@sberdevices.ru/
runtime WARN_ONCE() is added to alarm IIO driver authors who make such
a mistake.
When an IIO driver allocates a new IIO trigger, it should register it
before calling the get() operation. In other words, each IIO driver
must abide by IIO trigger alloc()/register()/get() calls order.
Signed-off-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Link: https://lore.kernel.org/r/20220607183907.20017-1-ddrokosov@sberdevices.ru
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Round Robin ADC is responsible for reading data about the rate of
charge from the USB or DC input ports, it can also read the battery
ID (resistence), skin temperature and the die temperature of the pmic.
It is found on the PMI8998 and PM660 Qualcomm PMICs.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20220429220904.137297-6-caleb.connolly@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add dt-binding docs for the Qualcomm SPMI RRADC found in PMICs like
PMI8998 and PMI8994
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220429220904.137297-5-caleb.connolly@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
