BCM2711, the SoC used on the Raspberry Pi 4 has a different 3D
render GPU IP than its predecessors. Enable it it on multi v7
and bcm2835 configs.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Some warnings do not increment the warnings counter making the behavior
of running kernel-doc with -Werror unlogical as some warnings will be
generated but not treated as errors.
Fix this by creating a helper function that always incrementing the
warnings counter every time a warning is emitted. There is one location
in get_sphinx_version() where a warning is not touched as it concerns
the execution environment of the kernel-doc and not the documentation
being processed.
Incrementing the counter only have effect when running kernel-doc in
either verbose mode (-v or environment variable KBUILD_VERBOSE) or when
treating warnings as errors (-Werror or environment variable
KDOC_WERROR). In both cases the number of warnings printed is printed to
stderr and for the later the exit code of kernel-doc is non-zero if
warnings where encountered.
Simple test case to demo one of the warnings,
$ cat test.c
/**
* foo() - Description
*/
int bar();
# Without this change
$ ./scripts/kernel-doc -Werror -none test.c
test.c:4: warning: expecting prototype for foo(). Prototype was for
bar() instead
# With this change
$ ./scripts/kernel-doc -Werror -none test.c
test.c:4: warning: expecting prototype for foo(). Prototype was for
bar() instead
1 warnings as Errors
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Link: https://lore.kernel.org/r/20220613090510.3088294-1-niklas.soderlund@corigine.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
If 'n' is so large that it's negative, we might wrap around and mistakenly
think that the copy is OK when it's not. Such a copy would probably
crash, but just doing the arithmetic in a more simple way lets us detect
and refuse this case.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220612213227.3881769-4-willy@infradead.org
Get rid of a lot of annoying casts by setting 'addr' once at the top
of the function.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220612213227.3881769-3-willy@infradead.org
vmalloc does not allocate a vm_struct for vm_map_ram() areas. That causes
us to deny usercopies from those areas. This affects XFS which uses
vm_map_ram() for its directories.
Fix this by calling find_vmap_area() instead of find_vm_area().
Fixes: 0aef499f31 ("mm/usercopy: Detect vmalloc overruns")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Tested-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220612213227.3881769-2-willy@infradead.org
This patch is similar to 7e193a42c3 ("can: netlink: allow
configuring of fixed bit rates without need for do_set_bittiming
callback") but for data bit rates instead of bit rates.
Usually CAN devices support configurable data bit rates. The limits
are defined by struct can_priv::data_bittiming_const. Another way is
to implement the struct can_priv::do_set_data_bittiming callback.
If the bit rate is configured via netlink, the can_changelink()
function checks that either can_priv::data_bittiming_const or struct
can_priv::do_set_data_bittiming is implemented.
In commit 431af77925 ("can: dev: add CAN interface API for fixed
bitrates") an API for configuring bit rates on CAN interfaces that
only support fixed bit rates was added. The supported bit rates are
defined by struct can_priv::bitrate_const.
However the above mentioned commit forgot to add the struct
can_priv::data_bitrate_const to the check in can_changelink().
In order to avoid to implement a no-op can_priv::do_set_data_bittiming
callback on devices with fixed data bit rates, extend the check in
can_changelink() accordingly.
Link: https://lore.kernel.org/all/20220613143633.4151884-1-mkl@pengutronix.de
Fixes: 431af77925 ("can: dev: add CAN interface API for fixed bitrates")
Acked-by: Max Staudt <max@enpas.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
RCU_NONIDLE usage during __cfi_slowpath_diag can result in an invalid
RCU state in the cpuidle code path:
WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:613 rcu_eqs_enter+0xe4/0x138
...
Call trace:
rcu_eqs_enter+0xe4/0x138
rcu_idle_enter+0xa8/0x100
cpuidle_enter_state+0x154/0x3a8
cpuidle_enter+0x3c/0x58
do_idle.llvm.6590768638138871020+0x1f4/0x2ec
cpu_startup_entry+0x28/0x2c
secondary_start_kernel+0x1b8/0x220
__secondary_switched+0x94/0x98
Instead, call rcu_irq_enter/exit to wake up RCU only when needed and
disable interrupts for the entire CFI shadow/module check when we do.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20220531175910.890307-1-samitolvanen@google.com
Fixes: cf68fffb66 ("add support for Clang CFI")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Since commit 6c846d026d ("gpio: Don't fiddle with irqchips marked as
immutable") a warning is issued for the realtek-otto driver:
gpio gpiochip0: (18003500.gpio): not an immutable chip, please consider fixing it!
Make the driver's irqchip immutable to fix this.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The filenames were changed a while ago, but board.rst, consumer.rst and
intro.rst still refer to the old names. Fix those references to match the
Actual names and avoid possible confusion.
Signed-off-by: Tom Schwindl <schwindl@posteo.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Maintainers of the directory Documentation/devicetree/bindings/gpio
are also the maintainers of the corresponding directory
include/dt-bindings/gpio.
Add the file entry for include/dt-bindings/gpio to the appropriate
section in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There is not have Headset Mic verb table in BIOS default.
So, it will have recording issue from headset MIC.
Add the verb table value without jack detect. It will turn on Headset Mic.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/719133a27d8844a890002cb817001dfa@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The fastpath in slab_alloc_node() assumes that c->slab is stable as long as
the TID stays the same. However, two places in __slab_alloc() currently
don't update the TID when deactivating the CPU slab.
If multiple operations race the right way, this could lead to an object
getting lost; or, in an even more unlikely situation, it could even lead to
an object being freed onto the wrong slab's freelist, messing up the
`inuse` counter and eventually causing a page to be freed to the page
allocator while it still contains slab objects.
(I haven't actually tested these cases though, this is just based on
looking at the code. Writing testcases for this stuff seems like it'd be
a pain...)
The race leading to state inconsistency is (all operations on the same CPU
and kmem_cache):
- task A: begin do_slab_free():
- read TID
- read pcpu freelist (==NULL)
- check `slab == c->slab` (true)
- [PREEMPT A->B]
- task B: begin slab_alloc_node():
- fastpath fails (`c->freelist` is NULL)
- enter __slab_alloc()
- slub_get_cpu_ptr() (disables preemption)
- enter ___slab_alloc()
- take local_lock_irqsave()
- read c->freelist as NULL
- get_freelist() returns NULL
- write `c->slab = NULL`
- drop local_unlock_irqrestore()
- goto new_slab
- slub_percpu_partial() is NULL
- get_partial() returns NULL
- slub_put_cpu_ptr() (enables preemption)
- [PREEMPT B->A]
- task A: finish do_slab_free():
- this_cpu_cmpxchg_double() succeeds()
- [CORRUPT STATE: c->slab==NULL, c->freelist!=NULL]
From there, the object on c->freelist will get lost if task B is allowed to
continue from here: It will proceed to the retry_load_slab label,
set c->slab, then jump to load_freelist, which clobbers c->freelist.
But if we instead continue as follows, we get worse corruption:
- task A: run __slab_free() on object from other struct slab:
- CPU_PARTIAL_FREE case (slab was on no list, is now on pcpu partial)
- task A: run slab_alloc_node() with NUMA node constraint:
- fastpath fails (c->slab is NULL)
- call __slab_alloc()
- slub_get_cpu_ptr() (disables preemption)
- enter ___slab_alloc()
- c->slab is NULL: goto new_slab
- slub_percpu_partial() is non-NULL
- set c->slab to slub_percpu_partial(c)
- [CORRUPT STATE: c->slab points to slab-1, c->freelist has objects
from slab-2]
- goto redo
- node_match() fails
- goto deactivate_slab
- existing c->freelist is passed into deactivate_slab()
- inuse count of slab-1 is decremented to account for object from
slab-2
At this point, the inuse count of slab-1 is 1 lower than it should be.
This means that if we free all allocated objects in slab-1 except for one,
SLUB will think that slab-1 is completely unused, and may free its page,
leading to use-after-free.
Fixes: c17dda40a6 ("slub: Separate out kmem_cache_cpu processing from deactivate_slab")
Fixes: 03e404af26 ("slub: fast release on full slab")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220608182205.2945720-1-jannh@google.com
The set_track() invocation in free_debug_processing() is invoked with
acquired slab_lock(). The lock disables interrupts on PREEMPT_RT and
this forbids to allocate memory which is done in stack_depot_save().
Split set_track() into two parts: set_track_prepare() which allocate
memory and set_track_update() which only performs the assignment of the
trace data structure. Use set_track_prepare() before disabling
interrupts.
[ vbabka@suse.cz: make set_track() call set_track_update() instead of
open-coded assignments ]
Fixes: 5cf909c553 ("mm/slub: use stackdepot to save stack trace in objects")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/Yp9sqoUi4fVa5ExF@linutronix.de
Add support for the detachable keyboard cover on the Surface Pro 8.
The keyboard cover on the Surface Pro 8 is, unlike the keyboard covers
of earlier Surface Pro generations, handled via the Surface System
Aggregator Module (SSAM). The keyboard and touchpad (as well as other
HID input devices) of this cover are standard SSAM HID client devices
(just like keyboard and touchpad on e.g. the Surface Laptop 3 and 4),
however, some care needs to be taken as they can be physically detached
(similarly to the Surface Book 3). Specifically, the respective SSAM
client devices need to be removed when the keyboard cover has been
detached and (re-)initialized when the keyboard cover has been
(re-)attached.
On the Surface Pro 8, detachment of the keyboard cover (and by extension
its devices) is managed via the KIP subsystem. Therefore, said devices
need to be registered under the KIP device hub, which in turn will
remove and re-create/re-initialize those devices as needed.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-13-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add a Surface System Aggregator Module (SSAM) client device hub for
hot-removable devices managed via the KIP subsystem.
The KIP subsystem (full name unknown, abbreviation has been obtained
through reverse engineering) is a subsystem that manages hot-removable
SSAM client devices. Specifically, it manages HID input devices
contained in the detachable keyboard cover of the Surface Pro 8 and
Surface Pro X.
The KIP subsystem handles a single group of devices (e.g. all devices
contained in the keyboard cover) and cannot handle devices individually.
Thus we model it as a client device hub, which (hot-)removes all devices
contained under it once removal of the hub (e.g. keyboard cover) has
been detected and (re-)adds all devices once the physical hub device has
been (re-)attached. To do this, use the previously generified SSAM
subsystem hub framework.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-12-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use the target category of the (base) hub as instance id in the
(virtual) hub device UID. This makes association of the hub with the
respective subsystem easier.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-11-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Surface System Aggregator Module (SSAM) has multiple subsystems that
can manage detachable devices. At the moment, we only support the "base"
(BAS/0x11) subsystem, which is used on the Surface Book 3 to manage
devices (including keyboard, touchpad, and secondary battery) connected
to the base of the device.
The Surface Pro 8 has a new type-cover with keyboard and touchpad, which
is managed via the KIP/0x0e subsystem. The general procedure is the
same, but with slightly different events and setup. To make
implementation of the KIP hub easier and prevent duplication, generify
the parts of the base hub that we can use for the KIP hub (or any
potential future subsystem hubs).
This also switches over to use the newly introduced "hot-remove"
functionality, which should prevent communication issues when devices
have been detached.
Lastly, also drop the undocumented and unused sysfs "state" attribute of
the base hub. It has at best been useful for debugging.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-10-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The KIP subsystem (full name unknown, abbreviation has been obtained
through reverse engineering) handles detachable peripherals such as the
keyboard cover on the Surface Pro X and Surface Pro 8.
It is currently not entirely clear what this subsystem entails, but at
the very least it provides event notifications for when the keyboard
cover on the Surface Pro X and Surface Pro 8 have been detached or
re-attached, as well as the state that the keyboard cover is currently
in (e.g. folded-back, folded laptop-like, closed, etc.).
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-9-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add support for hot-removal of SSAM HID client devices.
Once a device has been hot-removed, further communication with it should
be avoided as it may fail and time out. While the device will be removed
as soon as we detect hot-removal, communication may still occur during
teardown, especially when unregistering notifiers.
While hot-removal is a surprise event that can happen at any time, try
to avoid communication as much as possible once it has been detected to
prevent timeouts that can slow down device removal and cause issues,
e.g. when quickly re-attaching the device.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-8-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use newly introduced client device wrapper functions for notifier
registration and unregistration.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-7-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use newly introduced client device wrapper functions for notifier
registration and unregistration.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-6-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use newly introduced client device wrapper functions for notifier
registration and unregistration.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-5-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When SSAM client devices have been (physically) hot-removed,
communication attempts with those devices may fail and time out. This
can even extend to event notifiers, due to which timeouts may occur
during device removal, slowing down that process.
Add a parameter to the notifier unregister function that allows skipping
communication with the EC to prevent this. Furthermore, add wrappers for
registering and unregistering notifiers belonging to SSAM client devices
that automatically check if the device has been marked as hot-removed
and communication should be avoided.
Note that non-SSAM client devices can generally not be hot-removed, so
also add a convenience wrapper for those, defaulting to allow
communication.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some SSAM devices, notably the keyboard cover (keyboard and touchpad) on
the Surface Pro 8, can be hot-removed. When this occurs, communication
with the device may fail and time out. This timeout can unnecessarily
block and slow down device removal and even cause issues when the
devices are detached and re-attached quickly. Thus, communication should
generally be avoided once hot-removal is detected.
While we already remove a device as soon as we detect its (hot-)removal,
the corresponding device driver may still attempt to communicate with
the device during teardown. This is especially critical as communication
failure may also extend to disabling of events, which is typically done
at that stage.
Add a flag to allow marking devices as hot-removed. This can then be
used during client driver teardown to check if any communication
attempts should be avoided.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
In SSAM subsystem drivers that handle both ACPI and SSAM-native client
devices, we may want to check whether we have a SSAM (native) client
device. Further, we may want to do this even when instantiation thereof
cannot happen due to CONFIG_SURFACE_AGGREGATOR_BUS=n. Currently, doing
so causes an error due to an undefined reference error due to
ssam_device_type being placed in the bus source unit.
Therefore, if CONFIG_SURFACE_AGGREGATOR_BUS is not defined, simply let
is_ssam_device() return false to prevent this error.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220527023447.2460025-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add missing header file into dsi_host.c and encode data-lanes string
directly into the warning message in the driver to avoid build issues
detected by lkp.
Fixes: 185443efa2 ("drm/msm: Convert to drm_of_get_data_lanes_count")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sean Paul <sean@poorly.run>
To: dri-devel@lists.freedesktop.org
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220612143349.105766-1-marex@denx.de
Print a warning if the device mode doesn't match the requested mode.
The user doesn't enter the mode in hex so it isn't obvious when
setting the mode succeeds that the mode isn't the requested mode. The
kernel logs a message, it will be more visible if the test also prints
a warning. I was testing --quad, which is unsupported, but doesn't
cause the mode request to fail.
Signed-off-by: David Fries <David@Fries.net>
Link: https://lore.kernel.org/r/YqbNnSGtWHe/GG7w@spacedout.fries.net
Signed-off-by: Mark Brown <broonie@kernel.org>
There are pointers being set to null using use. Use NULL instead.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20220612203428.2754823-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the unreasonable clk_prepare_enable() with clk_disable_unprepare()
before return from mchp_corespi_probe() in the error handling case.
Signed-off-by: Peng Wu <wupeng58@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220611021117.40494-1-wupeng58@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Even though the DW I2C controller reference clock source is requested by
the method devm_clk_get() with non-optional clock requirement the way the
clock handler is used afterwards has a pure optional clock semantic
(though in some circumstances we can get a warning about the clock missing
printed in the system console). There is no point in reimplementing that
functionality seeing the kernel clock framework already supports the
optional interface from scratch. Thus let's convert the platform driver to
using it.
Note by providing this commit we get to fix two problems. The first one
was introduced in commit c62ebb3d5f ("i2c: designware: Add support for
an interface clock"). It causes not having the interface clock (pclk)
enabled/disabled in case if the reference clock isn't provided. The second
problem was first introduced in commit b33af11de2 ("i2c: designware: Do
not require clock when SSCN and FFCN are provided"). Since that
modification the deferred probe procedure has been unsupported in case if
the interface clock isn't ready.
Fixes: c62ebb3d5f ("i2c: designware: Add support for an interface clock")
Fixes: b33af11de2 ("i2c: designware: Do not require clock when SSCN and FFCN are provided")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Maintainers of the directory Documentation/devicetree/bindings/i2c
are also the maintainers of the corresponding directory
include/dt-bindings/i2c.
Add the file entry for include/dt-bindings/i2c to the appropriate
section in MAINTAINERS.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Commit 8ad69f4905 ("dt-bindings: i2c: convert ocores binding to yaml")
converts i2c-ocores.txt to opencores,i2c-ocores.yaml, but then adjust its
reference in MAINTAINERS to a slightly wrong new filename.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file reference in OPENCORES I2C BUS DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Currently wcd938x_*_put() unconditionally report that the value of the
control changed, resulting in spurious events being generated. Return 0 in
that case instead as we should. There is still an issue in the compander
control which is a bit more complex.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220603122526.3914942-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
As part of retiring the old defines used to specify DAI formats update the
hdmi_codec driver to use the modern names, including the variables in the
struct hdmi_codec_daifmt exported to the DRM drivers.
In updating this I did note that the only use of this information in DRM
drivers is to reject clock provider settings, thinking about what this
hardware is doing I rather suspect that there might not be any hardware
out there which needs the configuration so it may be worth considering
just having hdmi-codec support only clock consumer.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220602103029.3498791-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
PolarFire SoC has a pair of CAN controllers, but as they were
undocumented there were omitted from the device tree. Add them.
Link: https://lore.kernel.org/all/20220607065459.2035746-3-conor.dooley@microchip.com
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pull io_uring fixes from Pavel.
* 'io_uring/io_uring-5.19' of https://github.com/isilence/linux:
io_uring: fix double unlock for pbuf select
io_uring: kbuf: fix bug of not consuming ring buffer in partial io case
io_uring: openclose: fix bug of closing wrong fixed file
io_uring: fix not locked access to fixed buf table
io_uring: fix races with buffer table unregister
io_uring: fix races with file table unregister
__sys_accept4_file() isn't used outside of the file, make it static.
As the same time, move file_flags and nofile parameters into
__sys_accept4_file().
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 6e144b47f5 (octeontx2-pf: Add support for adaptive interrupt coalescing)
Added support for VF interfaces as well.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_memory_allocated_add() has three callers, and returns
to them @memory_allocated.
sk_forced_mem_schedule() is one of them, and ignores
the returned value.
Change sk_memory_allocated_add() to return void.
Change sock_reserve_memory() and __sk_mem_raise_allocated()
to call sk_memory_allocated().
This removes one cache line miss [1] for RPC workloads,
as first skbs in TCP write queue and receive queue go through
sk_forced_mem_schedule().
[1] Cache line holding tcp_memory_allocated.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds support for Microchip's EVB-LAN8670-USB 10BASE-T1S
ethernet device to the existing smsc95xx driver by adding the new
USB VID/PID pairs.
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
48-bit DMA addressing is supported in NFP3800 HW and implemented
in NFDK firmware, so enable this feature in driver now. Note that
with this change, NFD3 firmware, which doesn't implement 48-bit
DMA, cannot be used for NFP3800 any more.
RX free list descriptor, used by both NFD3 and NFDK, is also modified
to support 48-bit DMA. That's OK because the top bits is always get
set to 0 when assigned with 40-bit address.
Based on initial work of Jakub Kicinski <jakub.kicinski@netronome.com>.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move peripheral properties for Tegra QSPI controller to
nvidia,tegra210-quad-peripheral-props.yaml and add reference
to spi-peripheral-props.yaml file.
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Link: https://lore.kernel.org/r/20220607114659.54314-3-kyarlagadda@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tegra Grace and later chips can support upto 4 chip select lines
for QUAD SPI. Added new compatible for Tegra Grace.
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Link: https://lore.kernel.org/r/20220607114659.54314-2-kyarlagadda@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
backlight_properties.fb_blank is deprecated. The states it represents
are handled by other properties; but instead of accessing those
properties directly, drivers should use the helpers provided by
backlight.h.
Instead of retrieving the backlight brightness in struct
backlight_properties manually, and then checking whether the backlight
should be on at all, use backlight_get_brightness() which does all
this and insulates this from future changes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220607185304.1128962-1-steve@sk2.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The slimbus mux put operation unconditionally reports a change in value
which means that spurious events are generated. Fix this by exiting early
in that case.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220603124609.4024666-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently in slim_rx_mux_put, an RX channel gets added to a new list
even if it is already in one. This can mess up links and make either
it, the new list head, or both, get linked to the wrong entries.
This can cause an entry to link to itself which in turn ends up
making list_for_each_entry in other functions loop infinitely.
To avoid issues, always remove the RX channel from any list it's in
before adding it to a new list.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220606152226.149164-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
