Align the name of thermal zone node to dtschema to fix warnings like:
arch/arm64/boot/dts/mediatek/mt8173-elm.dt.yaml:
thermal-zones: 'cpu_thermal' does not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20210820081616.83674-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Align the name of operating-points node to dtschema to fix warnings like:
arch/arm64/boot/dts/mediatek/mt8173-elm.dt.yaml:
opp_table0: $nodename:0: 'opp_table0' does not match '^opp-table(-[a-z0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20210820081616.83674-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
dtschema expects PWM node name to be a generic "pwm". This also matches
Devicetree specification requirements about generic node names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220214081916.162014-3-krzysztof.kozlowski@canonical.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
The hardware checksum offloading requires use of a transmit
status block inserted before the outgoing frame data, this was
updated in '9a9ba2a4aa ("net: bcmgenet: always enable status blocks")'
However, skb_tx_timestamp() assumes that it is passed a raw frame
and PTP parsing chokes on this status block.
Fix this by calling __skb_pull(), which hides the TSB before calling
skb_tx_timestamp(), so an outgoing PTP packet is parsed correctly.
As the data in the skb has already been set up for DMA, and the
dma_unmap_* calls use a separately stored address, there is no
no effective change in the data transmission.
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220424165307.591145-1-jonathan.lemon@gmail.com
Fixes: d03825fba4 ("net: bcmgenet: add skb_tx_timestamp call")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ksz8795 and ksz9477 uses the same algorithm for the
port_stp_state_set function except the register address is different. So
moved the algorithm to the ksz_common.c and used the dev_ops for
register read and write. This function can also used for the lan937x
part. Hence making it generic for all the parts.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220424112831.11504-1-arun.ramadoss@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When CONFIG_DRM_I915_DEBUG_RUNTIME and CONFIG_DRM_I915_DEBUG_PM
are enabled, two more extra symols in i915 are required to be
exported.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220425220331.24865-1-zhi.a.wang@intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
These look to be leftover from an early edition of this driver. Userspace
does not need this information. Checking all users of this that I have
access to I have verified no one is using them.
They leak internal use flags out to userspace. Even more they are not
correct anymore after a45ea4efa3. Lets drop these flags before
someone does try to use them for something and they become ABI.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
We should not need to index into SHMs based on absolute VA/PA.
These functions are not used and this kind of usage should not be
encouraged anyway. Remove these functions.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Added the config_intr and handle_interrupt for the LAN937x phy which is
same as the LAN87xx phy.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220423154727.29052-1-arun.ramadoss@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The codeaurora.org domain is no longer valid, remove my id
from the maintainers for OMAP PM frameworks.
I haven't contributed to them in years, neither do I plan to
in the future so not updating this with my new quicinc id.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Message-Id: <1649824983-29400-1-git-send-email-quic_rjendra@quicinc.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This function returns zero unconditionally, so there isn't any benefit
of returning a value. Make it return void to be able to see at a glance
that the return value of ssd130x_i2c_remove() is always zero.
This patch is a preparation for making i2c remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220425192306.59800-1-u.kleine-koenig@pengutronix.de
Create a dump header to enable the addition of fields without having
to modify the rest of the code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jean-Marc Eurin <jmeurin@google.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220421234244.2172003-3-jmeurin@google.com
The read buffer size depends on the MTDOOPS_HEADER_SIZE.
Tested: Changed the header size, it doesn't panic, header is still
read/written correctly.
Signed-off-by: Jean-Marc Eurin <jmeurin@google.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220421234244.2172003-2-jmeurin@google.com
The function mctp_unregister() reclaims the device's relevant resource
when a netcard detaches. However, a running routine may be unaware of
this and cause the use-after-free of the mdev->addrs object.
The race condition can be demonstrated below
cleanup thread another thread
|
unregister_netdev() | mctp_sendmsg()
... | ...
mctp_unregister() | rt = mctp_route_lookup()
... | mctl_local_output()
kfree(mdev->addrs) | ...
| saddr = rt->dev->addrs[0];
|
An attacker can adopt the (recent provided) mtcpserial driver with pty
to fake the device detaching and use the userfaultfd to increase the
race success chance (in mctp_sendmsg). The KASan report for such a POC
is shown below:
[ 86.051955] ==================================================================
[ 86.051955] BUG: KASAN: use-after-free in mctp_local_output+0x4e9/0xb7d
[ 86.051955] Read of size 1 at addr ffff888005f298c0 by task poc/295
[ 86.051955]
[ 86.051955] Call Trace:
[ 86.051955] <TASK>
[ 86.051955] dump_stack_lvl+0x33/0x42
[ 86.051955] print_report.cold.13+0xb2/0x6b3
[ 86.051955] ? preempt_schedule_irq+0x57/0x80
[ 86.051955] ? mctp_local_output+0x4e9/0xb7d
[ 86.051955] kasan_report+0xa5/0x120
[ 86.051955] ? mctp_local_output+0x4e9/0xb7d
[ 86.051955] mctp_local_output+0x4e9/0xb7d
[ 86.051955] ? mctp_dev_set_key+0x79/0x79
[ 86.051955] ? copyin+0x38/0x50
[ 86.051955] ? _copy_from_iter+0x1b6/0xf20
[ 86.051955] ? sysvec_apic_timer_interrupt+0x97/0xb0
[ 86.051955] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 86.051955] ? mctp_local_output+0x1/0xb7d
[ 86.051955] mctp_sendmsg+0x64d/0xdb0
[ 86.051955] ? mctp_sk_close+0x20/0x20
[ 86.051955] ? __fget_light+0x2fd/0x4f0
[ 86.051955] ? mctp_sk_close+0x20/0x20
[ 86.051955] sock_sendmsg+0xdd/0x110
[ 86.051955] __sys_sendto+0x1cc/0x2a0
[ 86.051955] ? __ia32_sys_getpeername+0xa0/0xa0
[ 86.051955] ? new_sync_write+0x335/0x550
[ 86.051955] ? alloc_file+0x22f/0x500
[ 86.051955] ? __ip_do_redirect+0x820/0x1820
[ 86.051955] ? vfs_write+0x44d/0x7b0
[ 86.051955] ? vfs_write+0x44d/0x7b0
[ 86.051955] ? fput_many+0x15/0x120
[ 86.051955] ? ksys_write+0x155/0x1b0
[ 86.051955] ? __ia32_sys_read+0xa0/0xa0
[ 86.051955] __x64_sys_sendto+0xd8/0x1b0
[ 86.051955] ? exit_to_user_mode_prepare+0x2f/0x120
[ 86.051955] ? syscall_exit_to_user_mode+0x12/0x20
[ 86.051955] do_syscall_64+0x3a/0x80
[ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 86.051955] RIP: 0033:0x7f82118a56b3
[ 86.051955] RSP: 002b:00007ffdb154b110 EFLAGS: 00000293 ORIG_RAX: 000000000000002c
[ 86.051955] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f82118a56b3
[ 86.051955] RDX: 0000000000000010 RSI: 00007f8211cd4000 RDI: 0000000000000007
[ 86.051955] RBP: 00007ffdb154c1d0 R08: 00007ffdb154b164 R09: 000000000000000c
[ 86.051955] R10: 0000000000000000 R11: 0000000000000293 R12: 000055d779800db0
[ 86.051955] R13: 00007ffdb154c2b0 R14: 0000000000000000 R15: 0000000000000000
[ 86.051955] </TASK>
[ 86.051955]
[ 86.051955] Allocated by task 295:
[ 86.051955] kasan_save_stack+0x1c/0x40
[ 86.051955] __kasan_kmalloc+0x84/0xa0
[ 86.051955] mctp_rtm_newaddr+0x242/0x610
[ 86.051955] rtnetlink_rcv_msg+0x2fd/0x8b0
[ 86.051955] netlink_rcv_skb+0x11c/0x340
[ 86.051955] netlink_unicast+0x439/0x630
[ 86.051955] netlink_sendmsg+0x752/0xc00
[ 86.051955] sock_sendmsg+0xdd/0x110
[ 86.051955] __sys_sendto+0x1cc/0x2a0
[ 86.051955] __x64_sys_sendto+0xd8/0x1b0
[ 86.051955] do_syscall_64+0x3a/0x80
[ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 86.051955]
[ 86.051955] Freed by task 301:
[ 86.051955] kasan_save_stack+0x1c/0x40
[ 86.051955] kasan_set_track+0x21/0x30
[ 86.051955] kasan_set_free_info+0x20/0x30
[ 86.051955] __kasan_slab_free+0x104/0x170
[ 86.051955] kfree+0x8c/0x290
[ 86.051955] mctp_dev_notify+0x161/0x2c0
[ 86.051955] raw_notifier_call_chain+0x8b/0xc0
[ 86.051955] unregister_netdevice_many+0x299/0x1180
[ 86.051955] unregister_netdevice_queue+0x210/0x2f0
[ 86.051955] unregister_netdev+0x13/0x20
[ 86.051955] mctp_serial_close+0x6d/0xa0
[ 86.051955] tty_ldisc_kill+0x31/0xa0
[ 86.051955] tty_ldisc_hangup+0x24f/0x560
[ 86.051955] __tty_hangup.part.28+0x2ce/0x6b0
[ 86.051955] tty_release+0x327/0xc70
[ 86.051955] __fput+0x1df/0x8b0
[ 86.051955] task_work_run+0xca/0x150
[ 86.051955] exit_to_user_mode_prepare+0x114/0x120
[ 86.051955] syscall_exit_to_user_mode+0x12/0x20
[ 86.051955] do_syscall_64+0x46/0x80
[ 86.051955] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 86.051955]
[ 86.051955] The buggy address belongs to the object at ffff888005f298c0
[ 86.051955] which belongs to the cache kmalloc-8 of size 8
[ 86.051955] The buggy address is located 0 bytes inside of
[ 86.051955] 8-byte region [ffff888005f298c0, ffff888005f298c8)
[ 86.051955]
[ 86.051955] The buggy address belongs to the physical page:
[ 86.051955] flags: 0x100000000000200(slab|node=0|zone=1)
[ 86.051955] raw: 0100000000000200 dead000000000100 dead000000000122 ffff888005c42280
[ 86.051955] raw: 0000000000000000 0000000080660066 00000001ffffffff 0000000000000000
[ 86.051955] page dumped because: kasan: bad access detected
[ 86.051955]
[ 86.051955] Memory state around the buggy address:
[ 86.051955] ffff888005f29780: 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00
[ 86.051955] ffff888005f29800: fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc
[ 86.051955] >ffff888005f29880: fc fc fc fb fc fc fc fc fa fc fc fc fc fa fc fc
[ 86.051955] ^
[ 86.051955] ffff888005f29900: fc fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc
[ 86.051955] ffff888005f29980: fc 00 fc fc fc fc 00 fc fc fc fc 00 fc fc fc fc
[ 86.051955] ==================================================================
To this end, just like the commit e04480920d ("Bluetooth: defer
cleanup of resources in hci_unregister_dev()") this patch defers the
destructive kfree(mdev->addrs) in mctp_unregister to the mctp_dev_put,
where the refcount of mdev is zero and the entire device is reclaimed.
This prevents the use-after-free because the sendmsg thread holds the
reference of mdev in the mctp_route object.
Fixes: 583be982d9 (mctp: Add device handling and netlink interface)
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20220422114340.32346-1-linma@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
plane_state->uapi.crtc is not what we want to be looking at.
If bigjoiner is used hw.crtc is what tells us what crtc the plane
is supposedly using.
Not an actual problem on current hardware as the only FBC capable
pipe (A) can't be a bigjoiner slave and thus uapi.crtc==hw.crtc
always here. But when we get more FBC instances this will become
actually important.
Fixes: 2e6c99f886 ("drm/i915/fbc: Nuke lots of crap from intel_fbc_state_cache")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220413152852.7336-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
(cherry picked from commit 3e1faae339)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
For some MediaTek SoCs, like MT8186, it's possible that the sram regulator
is shared between CPU and CCI.
We hope regulator framework can return error for error handling rather
than a dummy handler from regulator_get api.
Therefore, we choose to use regulator_get_optional.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We found the buck voltage may not be exactly the same with what we set
because CPU may share the same buck with other module.
Therefore, we need to record the previous desired value instead of reading
it from regulators.
Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com>
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
To make driver more readable, replace old_* with pre_*.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- Replace pr_* with dev_* to show logs.
- Remove usage of __func__.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
We need to enable regulators so that the max and min requested values will
be recorded.
The intermediate clock is not always enabled by CCF in different projects,
so we should enable it in the cpufreq driver.
Signed-off-by: Andrew-sh.Cheng <andrew-sh.cheng@mediatek.com>
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- Remove several unnecessary varaibles in mtk_cpu_dvfs_info_init().
- Unify error message format and use dev_err_probe() if possible.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- Use module_init instead of device_initcall.
- Add a function for module_exit to unregister driver.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Adding cclpex node to represent Tegra234 cpufreq.
Tegra234 uses some of the CRAB (Control Register Access Bus)
registers for cpu frequency requests. These registers are
memory mapped to CCPLEX_MMCRAB_ARM region. In this node, mapping
the range of MMCRAB registers required only for cpu frequency info.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This patch adds driver support for Tegra234 cpufreq.
Tegra234 has per core MMIO registers instead of system registers for
cpu frequency requests and to read the counters for re-constructing
the cpu frequency. Also, MPIDR affinity info in Tegra234 is different
from Tegra194.
Added ops hooks and soc data for Tegra234. This will help to easily
add variants of Tegra234 and future SoC's which use similar logic to
{get|set} the cpu frequency.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Adding SoC data and ops to support multiple SoC's in same driver.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Tegra CPU COMPLEX CLUSTER area contains memory-mapped
registers that initiate CPU frequency/voltage transitions.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
It's noted that dcvs interrupts are not self-clearing, thus an interrupt
handler runs constantly, which leads to a severe regression in runtime.
To fix the problem an explicit write to clear interrupt register is
required, note that on OSM platforms the register may not be present.
Fixes: 275157b367 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
kvmalloc() and kvzalloc() functions have now 2-factor multiplication
argument forms kvmalloc_array() and kvcalloc(), correspondingly.
Add alloc-with-multiplies checks for these new functions.
Link: https://github.com/KSPP/linux/issues/187
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
'size' may be used uninitialized in gsm_dlci_modem_output() if called with
an adaption that is neither 1 nor 2. The function is currently only called
by gsm_modem_upd_via_data() and only for adaption 2.
Properly handle every invalid case by returning -EINVAL to silence the
compiler warning and avoid future regressions.
Fixes: c19ffe00fe ("tty: n_gsm: fix invalid use of MSC in advanced option")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220425104726.7986-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the max_wro_seq_files, nr_wro_seq_files, max_active_seq_files
and nr_active_seq_files sysfs attributes.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
All work currently pending will be done first by calling destroy_workqueue,
so there is no need to flush it explicitly.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220424062655.3221152-1-ran.jianping@zte.com.cn
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Remove unneeded variable 'rc' used to store return value.
Link: https://lore.kernel.org/r/20220419065750.2573861-1-deng.changcheng@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All work currently pending will be done first by calling
destroy_workqueue(). There is no need to flush it explicitly.
Link: https://lore.kernel.org/r/20220424065406.3228528-1-ran.jianping@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All work currently pending will be done first by calling
destroy_workqueue(). There is no need to flush it explicitly.
Link: https://lore.kernel.org/r/20220424062413.3220315-1-ran.jianping@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
All work currently pending will be done first by calling
destroy_workqueue(). There is no need to flush it explicitly.
Link: https://lore.kernel.org/r/20220424061845.3218774-1-ran.jianping@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ran jianping <ran.jianping@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This reverts commit 4b8628d57b.
XFS quota has had the concept of a "quota warning limit" since
the earliest Irix implementation, but a mechanism for incrementing
the warning counter was never implemented, as documented in the
xfs_quota(8) man page. We do know from the historical archive that
it was never incremented at runtime during quota reservation
operations.
With this commit, the warning counter quickly increments for every
allocation attempt after the user has crossed a quote soft
limit threshold, and this in turn transitions the user to hard
quota failures, rendering soft quota thresholds and timers useless.
This was reported as a regression by users.
Because the intended behavior of this warning counter has never been
understood or documented, and the result of this change is a regression
in soft quota functionality, revert this commit to make soft quota
limits and timers operable again.
Fixes: 4b8628d57b ("xfs: actually bump warning counts when we send warnings)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The filestream AG selection loop uses pagf data to aid in AG
selection, which depends on pagf initialization. If the in-core
structure is not initialized, the caller invokes the AGF read path
to do so and carries on. If another task enters the loop and finds
a pagf init already in progress, the AGF read returns -EAGAIN and
the task continues the loop. This does not increment the current ag
index, however, which means the task spins on the current AGF buffer
until unlocked.
If the AGF read I/O submitted by the initial task happens to be
delayed for whatever reason, this results in soft lockup warnings
via the spinning task. This is reproduced by xfs/170. To avoid this
problem, fix the AGF trylock failure path to properly iterate to the
next AG. If a task iterates all AGs without making progress, the
trylock behavior is dropped in favor of blocking locks and thus a
soft lockup is no longer possible.
Fixes: f48e2df8a8 ("xfs: make xfs_*read_agf return EAGAIN to ALLOC_FLAG_TRYLOCK callers")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
