Remove manual removal of DRM modesetting objects, it is done anyway by
the drm_mode_config_cleanup() called from msm_drm_uninit(). Other
MSM display drivers (MDP4, MDP5) do not manually destroy objects and
trust generic code to do it's work.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/480943/
Link: https://lore.kernel.org/r/20220406101247.483649-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add calls to drm_bridge_add()/drm_bridge_remove() DRM bridges created by
the driver. This fixes the following warning.
WARNING: CPU: 0 PID: 1 at kernel/locking/mutex.c:579 __mutex_lock+0x840/0x9f4
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc1-00002-g3054695a0d27-dirty #55
Hardware name: Generic DT based system
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0xc8/0x1e8
__warn from warn_slowpath_fmt+0x78/0xa8
warn_slowpath_fmt from __mutex_lock+0x840/0x9f4
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from drm_bridge_hpd_enable+0x2c/0x84
drm_bridge_hpd_enable from msm_hdmi_modeset_init+0xc0/0x21c
msm_hdmi_modeset_init from mdp4_kms_init+0x53c/0x90c
mdp4_kms_init from msm_drm_bind+0x514/0x698
msm_drm_bind from try_to_bring_up_aggregate_device+0x160/0x1bc
try_to_bring_up_aggregate_device from component_master_add_with_match+0xc4/0xf8
component_master_add_with_match from msm_pdev_probe+0x274/0x350
msm_pdev_probe from platform_probe+0x5c/0xbc
platform_probe from really_probe.part.0+0x9c/0x290
really_probe.part.0 from __driver_probe_device+0xa8/0x13c
__driver_probe_device from driver_probe_device+0x34/0x10c
driver_probe_device from __driver_attach+0xbc/0x178
__driver_attach from bus_for_each_dev+0x74/0xc0
bus_for_each_dev from bus_add_driver+0x160/0x1e4
bus_add_driver from driver_register+0x88/0x118
driver_register from do_one_initcall+0x6c/0x334
do_one_initcall from kernel_init_freeable+0x1bc/0x220
kernel_init_freeable from kernel_init+0x18/0x12c
kernel_init from ret_from_fork+0x14/0x2c
Fixes: 3d3f8b1f8b ("drm/bridge: make bridge registration independent of drm flow")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/481778/
Link: https://lore.kernel.org/r/20220411234953.2425280-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The msm_mdss serves several roles at this moment. It provides IRQ domain
used by MDP5 and DPU drivers but it also serves as a component master
for both those usecases. MDP4 (which does not have separate MDSS device)
is the component master on it's own.
Remove this assymmetry and make both MDP5 and DPU component masters too.
This removes a need to care about drm/components from msm_mdss driver,
removes an mdss pointer from struct msm_drm_private and simplifies the
interface between mdp5/dpu and msm_drv.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482512/
Link: https://lore.kernel.org/r/20220419155346.1272627-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
MSM DRM driver already allows one to compile out the DP or DSI support.
Add support for disabling other features like MDP4/MDP5/DPU drivers or
direct HDMI output support.
Suggested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482508/
Link: https://lore.kernel.org/r/20220419155346.1272627-6-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Let's make the match's data pointer a (sub-)driver's private data. The
only user currently is the msm_drm_init() function, using this data to
select kms_init callback. Pass this callback through the driver's
private data instead.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482510/
Link: https://lore.kernel.org/r/20220419155346.1272627-5-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Currently the msm platform driver is a multiplex handling several cases:
- headless GPU-only driver,
- MDP4 with flat device nodes,
- MDP5/DPU MDSS with all the nodes being children of MDSS node.
This results in not-so-perfect code, checking the hardware version
(MDP4/MDP5/DPU) in several places, checking for mdss even when it can
not exist, etc. Split the code into three handling subdrivers (mdp4,
mdss and headless msm).
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482507/
Link: https://lore.kernel.org/r/20220419155346.1272627-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Since now there is just one mdss subdriver, drop all the indirection,
make msm_mdss struct completely opaque (and defined inside msm_mdss.c)
and call mdss functions directly.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482505/
Link: https://lore.kernel.org/r/20220419155346.1272627-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
MDP5 and DPU1 both provide the driver handling the MDSS region, which
handles the irq domain and (incase of DPU1) adds some init for the UBWC
controller. Unify those two pieces of code into a common driver.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/482506/
Link: https://lore.kernel.org/r/20220419155346.1272627-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
musl nftw implementation does not support FTW_ACTIONRETVAL. There have been
multiple attempts at pushing the feature in musl upstream, but it has been
refused or ignored all the times:
https://www.openwall.com/lists/musl/2021/03/26/1https://www.openwall.com/lists/musl/2022/01/22/1
In this case we only care about /proc/<pid>/fd/<fd>, so it's not too difficult
to reimplement directly instead, and the new implementation makes 'bpftool perf'
slightly faster because it doesn't needlessly stat/readdir unneeded directories
(54ms -> 13ms on my machine).
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20220424051022.2619648-4-asmadeus@codewreck.org
There are several instances where magic numbers are used in md.c instead
of the defined constants in md_p.h. This patch set improves code
readability by replacing all occurrences of 0xffff, 0xfffe, and 0xfffd when
relating to md roles with their equivalent defined constant.
Signed-off-by: David Sloan <david.sloan@eideticom.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be supported with gcc v3.2,
the minimal required version for stable kernels.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be supported with gcc v3.2,
the minimal required version for stable kernels.
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kselftest.h makes the __cpuid_count() macro available
to conveniently call the CPUID instruction.
Remove the local CPUID wrapper and use __cpuid_count()
from already included kselftest.h instead.
__cpuid_count() from kselftest.h is used instead of the
macro provided by the compiler since gcc v4.4 (via cpuid.h)
because the selftest needs to be compiled with gcc v3.2,
the minimal required version for stable kernels.
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: "Desnes A. Nunes do Rosario" <desnesn@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Suchanek <msuchanek@suse.de>
Cc: linux-mm@kvack.org
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Some selftests depend on information provided by the CPUID instruction.
To support this dependency the selftests implement private wrappers for
CPUID.
Duplication of the CPUID wrappers should be avoided.
Both gcc and clang/LLVM provide __cpuid_count() macros but neither
the macro nor its header file are available in all the compiler
versions that need to be supported by the selftests. __cpuid_count()
as provided by gcc is available starting with gcc v4.4, so it is
not available if the latest tests need to be run in all the
environments required to support kernels v4.9 and v4.14 that
have the minimal required gcc v3.2.
Duplicate gcc's __cpuid_count() macro to provide a centrally defined
macro for __cpuid_count() to help eliminate the duplicate CPUID wrappers
while continuing to compile in older environments.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This version brings along following fixes:
- Keep tracking of DSC packed PPS for future use
- Maintain current link settings in link loss interrupt
- Remove DDC write and read size check
- Read PSR-SU cap DPCD for specific panel
- Don't pass HostVM by default on DCN3.1
- Reset cached PSR parameters after hibernate
- Add audio readback registers
- Update dcn315 clk table read
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Store current packed PPS data in dc_stream_state for future use.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Integer no longer needed.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DP compliance test case 400.3.2.3 is failed because in link loss interrupt
the current link settings is not used in the DP link training.
[How]
In link loss interrupt, use the current link settings in the following DP
link training.
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Gary Li <garyli12@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Customer found I2C over AUX using ADL_Display_DDCBlockAccess_Get
will fail when sending more than 256 bytes of data;
[How]
Remove the write and read size checking to allow sending data more
than 256 bytes;
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Leo Ma <hanghong.ma@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
For some specific eDP panel, we'd check the PSR-SU cap during boot
by reading the vendor specific DPCD, otherwise it will cause to
false report the eDP panel which supports PSR-SU as an non-PSR-SU
panel.
- add the vendor specific DPCD address in ddc_service_types header
- if specific eDP panel detected, check vendor specific DPCD for
PSR-SU cap
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: David Zhang <dingchen.zhang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Roll back previous change to stop passing this value by default, instead
add a debug flag to override to previous behaviour (or force HostVM calcs)
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
After hibernate system might be using old invalid psr_power_opt and
psr_allow_active that never get reset
[HOW]
Reset cached Panel Self Refresh parameters when PSR is first configured
for eDP in dc_link_setup_psr.
Reviewed-by: Harry Vanzylldejong <harry.vanzylldejong@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Evgenii Krasnikov <Evgenii.Krasnikov@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Can be useful for verifying the correctness of audio output.
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the sequence by making sure clk_mgr always builds a
reasonable clock table regardless of what we read from smu
by moving all defaults from resource soc struct to clk_mgr.
Now the only thing resource soc update does is read
the clock table and apply any DC specific policy decisions
to how clocks are populated in dml soc.
Reviewed-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following improvements:
- Fix HDCP QUERY Error for eDP and Tiled
- Insert smu busy status before sending another request
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
For dio_output_encoder ID we are relying on SW concept which is
invisible to HW
[HOW]
Needed to create separate cases for when DPIA and non DPIA for
dio link encoder ID
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: James Zhang <james.zhang@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Mustapha Ghaddar <mghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need to check if result register is busy before sending another request
[how]
Call method to check if result register is busy
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Oliver Logush <oliver.logush@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MEC firmware sometimes sends signal interrupts without a valid context ID
on end of pipe events that don't intend to signal any HSA signals.
This triggers the slow path in kfd_signal_event_interrupt that scans the
entire event page for signaled events. Detect these signals in the top
half interrupt handler to stop processing them as early as possible.
Because we now always treat event ID 0 as invalid, reserve that ID during
process initialization.
v2: Update firmware version checks to support more GPUs
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This move the kernel/kexec_core.c respective sysctls to its own file.
kernel/sysctl.c has grown to an insane mess, We move sysctls to places
where features actually belong to improve the readability and reduce
merge conflicts. At the same time, the proc-sysctl maintainers can easily
care about the core logic other than the sysctl knobs added for some feature.
We already moved all filesystem sysctls out. This patch is part of the effort
to move kexec related sysctls out.
Signed-off-by: yingelin <yingelin@huawei.com>
Acked-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The RAID0 layout is irrelevant if all members have the same size so the
array has only one zone. It is *also* irrelevant if the array has two
zones and the second zone has only one device, for example if the array
has two members of different sizes.
So in that case it makes sense to allow assembly even when the layout is
undefined, like what is done when the array has only one zone.
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
Signed-off-by: Song Liu <song@kernel.org>
A handful of functions note the device_lock must be held with a comment
but this is not comprehensive. Many other functions hold the lock when
taken so add an __must_hold() to each call to annotate when the lock is
held.
This makes it a bit easier to analyse device_lock.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
To suppress the last remaining sparse warnings about accessing
rdev, add rcu_dereference_protected calls to a couple places
in raid5-ppl. All of these places are called under raid5_run and
therefore are occurring before the array has started and is thus
safe.
There's no sensible check to do for the second argument of
rcu_dereference_protected() so a comment is added instead.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
The mddev_lock should be held during raid5_remove_disk() which is when
the rdev/replacement pointers are modified. So any access to these
pointers marked __rcu should be safe whenever the mddev_lock is held.
There are numerous such access that currently produce sparse warnings.
Add a helper function, rdev_mdlock_deref() that wraps
rcu_dereference_protected() in all these instances.
This annotation fixes a number of sparse warnings.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
There are a number of accesses to __rcu variables that should be safe
because nr_pending in the disk is known to be elevated.
Create a wrapper around rcu_dereference_protected() to annotate these
accesses and verify that nr_pending is non-zero.
This fixes a number of sparse warnings.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
rdev and replacement are protected in some circumstances with
rcu_dereference and synchronize_rcu (in raid5_remove_disk()). However,
they were not annotated with __rcu so a sparse warning is emitted for
every rcu_dereference() call.
Add the __rcu annotation and fix up the initialization with
RCU_INIT_POINTER, all pointer modifications with rcu_assign_pointer(),
a few cases where the pointer value is tested with rcu_access_pointer()
and one case where READ_ONCE() is used instead of rcu_dereference(),
a case in print_raid5_conf() that should have rcu_dereference() and
rcu_read_[un]lock() calls.
Additional sparse issues will be fixed up in further commits.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Sparse reports many warnings of the form:
drivers/md/raid5.c:1476:16: warning: dereference of noderef expression
This is because all struct raid5_percpu definitions get marked as
__percpu when really only the pointer in r5conf should have that
annotation.
Fix this by moving the defnition of raid5_precpu out of the definition
of struct r5conf.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
Be more careful about the error returns. Most errors in this function
are actually ENOMEM, but it forcibly returns EIO if conf has been
allocated.
Instead return ret and ensure it is set appropriately before each goto
abort.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Song Liu <song@kernel.org>
This commit includes two topics:
1> replace deprecated strlcpy
change strlcpy to strscpy for strlcpy is marked as deprecated in
Documentation/process/deprecated.rst
2> remove duplicated strlcpy line
in md_bitmap_read_sb@md-bitmap.c there are two duplicated strlcpy(), the
history:
- commit cf921cc19c ("Add node recovery callbacks") introduced the first
usage of strlcpy().
- commit b97e92574c ("Use separate bitmaps for each nodes in the cluster")
introduced the second strlcpy(). this time, the two strlcpy() are same,
we can remove anyone safely.
- commit d3b178adb3 ("md: Skip cluster setup for dm-raid") added dm-raid
special handling. And the "nodes" value is the key of this patch. but
from this patch, strlcpy() which was introduced by b97e92574c
become necessary.
- commit 3c462c880b ("md: Increment version for clustered bitmaps") used
clustered major version to only handle in clustered env. this patch
could look a polishment for clustered code logic.
So cf921cc19c became useless after d3b178adb3, we could remove it
safely.
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
The bug is here:
if (!rdev || rdev->desc_nr != nr) {
The list iterator value 'rdev' will *always* be set and non-NULL
by rdev_for_each_rcu(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
and lead to invalid memory access passing the check.
To fix the bug, use a new variable 'iter' as the list iterator,
while using the original variable 'pdev' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org
Fixes: 70bcecdb15 ("md-cluster: Improve md_reload_sb to be less error prone")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Song Liu <song@kernel.org>
The bug is here:
if (!rdev)
The list iterator value 'rdev' will *always* be set and non-NULL
by rdev_for_each(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element found.
Otherwise it will bypass the NULL check and lead to invalid memory
access passing the check.
To fix the bug, use a new variable 'iter' as the list iterator,
while using the original variable 'rdev' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org
Fixes: 2aa82191ac ("md-cluster: Perform a lazy update")
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Raid456 module had allowed to achieve failed state. It was fixed by
fb73b357fb ("raid5: block failing device if raid will be failed").
This fix introduces a bug, now if raid5 fails during IO, it may result
with a hung task without completion. Faulty flag on the device is
necessary to process all requests and is checked many times, mainly in
analyze_stripe().
Allow to set faulty on drive again and set MD_BROKEN if raid is failed.
As a result, this level is allowed to achieve failed state again, but
communication with userspace (via -EBUSY status) will be preserved.
This restores possibility to fail array via #mdadm --set-faulty command
and will be fixed by additional verification on mdadm side.
Reproduction steps:
mdadm -CR imsm -e imsm -n 3 /dev/nvme[0-2]n1
mdadm -CR r5 -e imsm -l5 -n3 /dev/nvme[0-2]n1 --assume-clean
mkfs.xfs /dev/md126 -f
mount /dev/md126 /mnt/root/
fio --filename=/mnt/root/file --size=5GB --direct=1 --rw=randrw
--bs=64k --ioengine=libaio --iodepth=64 --runtime=240 --numjobs=4
--time_based --group_reporting --name=throughput-test-job
--eta-newline=1 &
echo 1 > /sys/block/nvme2n1/device/device/remove
echo 1 > /sys/block/nvme1n1/device/device/remove
[ 1475.787779] Call Trace:
[ 1475.793111] __schedule+0x2a6/0x700
[ 1475.799460] schedule+0x38/0xa0
[ 1475.805454] raid5_get_active_stripe+0x469/0x5f0 [raid456]
[ 1475.813856] ? finish_wait+0x80/0x80
[ 1475.820332] raid5_make_request+0x180/0xb40 [raid456]
[ 1475.828281] ? finish_wait+0x80/0x80
[ 1475.834727] ? finish_wait+0x80/0x80
[ 1475.841127] ? finish_wait+0x80/0x80
[ 1475.847480] md_handle_request+0x119/0x190
[ 1475.854390] md_make_request+0x8a/0x190
[ 1475.861041] generic_make_request+0xcf/0x310
[ 1475.868145] submit_bio+0x3c/0x160
[ 1475.874355] iomap_dio_submit_bio.isra.20+0x51/0x60
[ 1475.882070] iomap_dio_bio_actor+0x175/0x390
[ 1475.889149] iomap_apply+0xff/0x310
[ 1475.895447] ? iomap_dio_bio_actor+0x390/0x390
[ 1475.902736] ? iomap_dio_bio_actor+0x390/0x390
[ 1475.909974] iomap_dio_rw+0x2f2/0x490
[ 1475.916415] ? iomap_dio_bio_actor+0x390/0x390
[ 1475.923680] ? atime_needs_update+0x77/0xe0
[ 1475.930674] ? xfs_file_dio_aio_read+0x6b/0xe0 [xfs]
[ 1475.938455] xfs_file_dio_aio_read+0x6b/0xe0 [xfs]
[ 1475.946084] xfs_file_read_iter+0xba/0xd0 [xfs]
[ 1475.953403] aio_read+0xd5/0x180
[ 1475.959395] ? _cond_resched+0x15/0x30
[ 1475.965907] io_submit_one+0x20b/0x3c0
[ 1475.972398] __x64_sys_io_submit+0xa2/0x180
[ 1475.979335] ? do_io_getevents+0x7c/0xc0
[ 1475.986009] do_syscall_64+0x5b/0x1a0
[ 1475.992419] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 1476.000255] RIP: 0033:0x7f11fc27978d
[ 1476.006631] Code: Bad RIP value.
[ 1476.073251] INFO: task fio:3877 blocked for more than 120 seconds.
Cc: stable@vger.kernel.org
Fixes: fb73b357fb ("raid5: block failing device if raid will be failed")
Reviewd-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
There is no direct mechanism to determine raid failure outside
personality. It is done by checking rdev->flags after executing
md_error(). If "faulty" flag is not set then -EBUSY is returned to
userspace. -EBUSY means that array will be failed after drive removal.
Mdadm has special routine to handle the array failure and it is executed
if -EBUSY is returned by md.
There are at least two known reasons to not consider this mechanism
as correct:
1. drive can be removed even if array will be failed[1].
2. -EBUSY seems to be wrong status. Array is not busy, but removal
process cannot proceed safe.
-EBUSY expectation cannot be removed without breaking compatibility
with userspace. In this patch first issue is resolved by adding support
for MD_BROKEN flag for RAID1 and RAID10. Support for RAID456 is added in
next commit.
The idea is to set the MD_BROKEN if we are sure that raid is in failed
state now. This is done in each error_handler(). In md_error() MD_BROKEN
flag is checked. If is set, then -EBUSY is returned to userspace.
As in previous commit, it causes that #mdadm --set-faulty is able to
fail array. Previously proposed workaround is valid if optional
functionality[1] is disabled.
[1] commit 9a567843f7ce("md: allow last device to be forcibly removed from
RAID1/RAID10.")
Reviewd-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mariusz Tkaczyk <mariusz.tkaczyk@linux.intel.com>
Signed-off-by: Song Liu <song@kernel.org>
Document the General Timer Module(a.k.a OSTM) found on the RZ/G2UL SoC.
OSTM module is identical to one found RZ/G2L SoC. No driver changes are
required as generic compatible string "renesas,ostm" will be used as a
fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220425141828.197321-1-biju.das.jz@bp.renesas.com
Convert the fsl,layerscape-dcfg binding to the new YAML format.
In the device trees, the device node always have a "syscon"
compatible, which wasn't mentioned in the previous binding.
One thing added here, compared to the original binding is the clock
controller subnode of the LS1028A SoC and its "simple-mfd" compatible as
used in arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi as well as the
little-endian and big-endian properties.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220425140433.33936-1-michael@walle.cc
Document RZ/G2UL I2C bindings. RZ/G2UL I2C is identical to one found on
the RZ/G2L SoC. No driver changes are required as RZ/G2L compatible
string "renesas,riic-rz" will be used as a fallback.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220425133152.176949-1-biju.das.jz@bp.renesas.com
Implement all the bits required to support HAVE_SYSCALL_TRACEPOINTS
according to Documentation/trace/ftrace-design.rst.
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@kernel.org>
