Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-13
This series contains updates to igc and e1000e drivers.
Sasha removes waiting for hardware semaphore as it could cause an
infinite loop and changes usleep_range() calls done under atomic
context to udelay() for igc. For e1000e, he changes some variables from
u16 to u32 to prevent possible overflow of values.
Vinicius disables PTM when going to suspend as it is causing hang issues
on some platforms for igc.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
e1000e: Fix possible overflow in LTR decoding
igc: Fix suspending when PTM is active
igc: Fix BUG: scheduling while atomic
igc: Fix infinite loop in release_swfw_sync
====================
Link: https://lore.kernel.org/r/20220413170814.2066855-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If dev_set_name() fails, the dev_name() is null, check the return
value of dev_set_name() to avoid the null-ptr-deref.
Fixes: 1413ef638a ("i2c: dev: Fix the race between the release of i2c_dev and cdev")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The GPI DMA engine driver can be compiled as a module, in which case the
likely probe deferral "error" shows up in the kernel log. Switch to
using dev_err_probe() to silence this warning and to ensure that
"devices_deferred" in debugfs carries this information.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i.MX8MP Mask Set Errata for Mask 1P33A, Rev. 2.0 has description of
errata ERR007805 as below. This errata is found on all MX8M{M,N,P,Q},
MX7{S,D}, MX6{UL{,L,Z},S{,LL,X},S,D,DL,Q,DP,QP} . MX7ULP, MX8Q, MX8X
are not affected. MX53 and older status is unknown, as the errata
first appears in MX6 errata sheets from 2016 and the latest errata
sheet for MX53 is from 2015. Older SoC errata sheets predate the
MX53 errata sheet. MX8ULP and MX9 status is unknown as the errata
sheet is not available yet.
"
ERR007805 I2C: When the I2C clock speed is configured for 400 kHz,
the SCL low period violates the I2C spec of 1.3 uS min
Description: When the I2C module is programmed to operate at the
maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL
clock low period violates the I2C spec of 1.3 uS min. The user must
reduce the clock speed to obtain the SCL low time to meet the 1.3us
I2C minimum required. This behavior means the SoC is not compliant
to the I2C spec at 400kHz.
Workaround: To meet the clock low period requirement in fast speed
mode, SCL must be configured to 384KHz or less.
"
Implement the workaround by matching on the affected SoC specific
compatible strings and by limiting the maximum bus frequency in case
the SoC is affected.
Signed-off-by: Marek Vasut <marex@denx.de>
To: linux-i2c@vger.kernel.org
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Wait for completion of write transfers before returning from the driver.
At first sight it may seem advantageous to leave write transfers queued
for the controller to carry out on its own time, but there's a couple of
issues with it:
* Driver doesn't check for FIFO space.
* The queued writes can complete while the driver is in its I2C read
transfer path which means it will get confused by the raising of
XEN (the 'transaction ended' signal). This can cause a spurious
ENODATA error due to premature reading of the MRXFIFO register.
Adding the wait fixes some unreliability issues with the driver. There's
some efficiency cost to it (especially with pasemi_smb_waitready doing
its polling), but that will be alleviated once the driver receives
interrupt support.
Fixes: beb58aa39e ("i2c: PA Semi SMBus driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert the Qualcomm Universal Peripheral (QUP) I2C controller to DT
Schema.
Add missing properties: dma and dma-names, pinctrl states (to indicate
support for sleep pinctrl).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
For some unknown reason qdisc_reset() is using
a convoluted way of freeing two lists of skbs.
Use __skb_queue_purge() instead.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220414011004.2378350-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In review comment [1] was pointed that new code is not supposed
to set driver version and should rely on kernel version instead.
As an outcome of that comment all the dance around setting such
driver version to FW should be removed too, because in upstream
kernel whole driver will have same version so read/write from/to
FW will give same result.
[1] https://lore.kernel.org/all/YladGTmon1x3dfxI@unreal
Fixes: 862cd659a6 ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/5d76f3116ee795071ec044eabb815d6c2bdc7dbd.1649922731.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sukadev Bhattiprolu says:
====================
ibmvnic: Use a set of LTBs per pool
ibmvnic uses a single large long term buffer (LTB) per rx or tx
pool (queue). This has two limitations.
First, if we need to free/allocate an LTB (eg during a reset), under
low memory conditions, the allocation can fail.
Second, the kernel limits the size of single LTB (DMA buffer) to 16MB
(based on MAX_ORDER). With jumbo frames (mtu = 9000) we can only have
about 1763 buffers per LTB (16MB / 9588 bytes per frame) even though
the max supported buffers is 4096. (The 9588 instead of 9088 comes from
IBMVNIC_BUFFER_HLEN.)
To overcome these limitations, allow creating a set of LTBs per queue.
====================
Link: https://lore.kernel.org/r/20220413171026.1264294-1-drt@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow multiple LTBs in the txpool's ltb_set. i.e rather than using
a single large LTB, use several smaller LTBs.
The first n-1 LTBs will all be of the same size. The size of the last
LTB in the set depends on the number of buffers and buffer (mtu) size.
This strategy hopefully allows more reuse of the initial LTBs and also
reduces the chances of an allocation failure (of the large LTB) when
system is low in memory.
Suggested-by: Brian King <brking@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow multiple LTBs in the rxpool's ltb_set. The first n-1 LTBs will all
be of the same size. The size of the last LTB in the set depends on the
number of buffers and buffer (mtu) size.
Having a set of LTBs per pool provides a couple of benefits.
First, with the current value of IBMVNIC_MAX_LTB_SIZE of 16MB, with an
MTU of 9000, we need a LTB (DMA buffer) of that size but the allocation
can fail in low memory conditions. With a set of LTBs per pool, we can
use several smaller (8MB) LTBs and hopefully have fewer allocation
failures. (See also comments in ibmvnic.h on the trade-off with smaller
LTBs)
Second since the kernel limits the size of the DMA buffer to 16MB (based
on MAX_ORDER), with a single DMA buffer per pool, the pool is also limited
to 16MB. This in turn limits the number of buffers per pool to 1763 when
MTU is 9000. With a set of LTBs per pool, we can have upto the max of 4096
buffers per pool even when MTU is 9000.
Suggested-by: Brian King <brking@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define and use interfaces that treat the long term buffer (LTB) of an
rxpool as a set of LTBs rather than a single LTB. The set only has one
LTB for now.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define a helper to map a given txpool buffer into its corresponding long
term buffer (LTB) and offset. Currently there is just one LTB per txpool
so the mapping is trivial. When we add support for multiple LTBs per
txpool, this helper will be more useful.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define a helper to map a given rx pool buffer into its corresponding long
term buffer (LTB) and offset. Currently there is just one LTB per pool so
the mapping is trivial. When we add support for multiple LTBs per pool,
this helper will be more useful.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The local variable 'index' is heavily used in some functions and is
confusing with the presence of other "index" fields like pool->index,
->consumer_index, etc. Rename it to bufidx to better reflect that its
the index of a buffer in the pool.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 92986f6b4c ("dm: use bio_clone_fast in alloc_io/alloc_tio")
removed bio_clone_fast() call from alloc_tio() when ci->io->tio is
available. In this case, ci->bio is not copied to ci->io->tio.clone.
This is fine since init_clone_info() sets same values to ci->bio and
ci->io->tio.clone.
However, when incoming bios have REQ_PREFLUSH flag, __send_empty_flush()
prepares a zero length bio on stack and set it to ci->bio. At this time,
ci->io->tio.clone still keeps non-zero length. When alloc_tio() chooses
this ci->io->tio.clone as the bio to map, it is passed to targets as
non-empty flush bio. It causes bio length check failure in dm-zoned and
unexpected operation such as dm_accept_partial_bio() call.
To avoid the non-empty flush bio, set zero length to ci->io->tio.clone
in __send_empty_flush().
Fixes: 92986f6b4c ("dm: use bio_clone_fast in alloc_io/alloc_tio")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Since commit 043cfff99a ("firmware: ti_sci: Fix compilation failure
when CONFIG_TI_SCI_PROTOCOL is not defined") it is possible to build
reset-ti-sci under CONFIG_COMPILE_TEST.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220404094500.2708816-1-p.zabel@pengutronix.de
The allocation funciton devm_kcalloc may fail and return a null pointer,
which would cause a null-pointer dereference later.
It might be better to check it and directly return -ENOMEM just like the
usage of devm_kcalloc in previous code.
Signed-off-by: QintaoShen <unSimple1993@163.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/1648107843-29077-1-git-send-email-unSimple1993@163.com
If CONFIG_SYSCTL and CONFIG_DYNAMIC_FTRACE is n, build warns:
kernel/trace/ftrace.c:7912:13: error: ‘is_permanent_ops_registered’ defined but not used [-Werror=unused-function]
static bool is_permanent_ops_registered(void)
^~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/trace/ftrace.c:89:12: error: ‘last_ftrace_enabled’ defined but not used [-Werror=unused-variable]
static int last_ftrace_enabled;
^~~~~~~~~~~~~~~~~~~
Move is_permanent_ops_registered() to ifdef block and mark last_ftrace_enabled as
__maybe_unused to fix this.
Fixes: 7cde53da38a3 ("ftrace: move sysctl_ftrace_enabled to ftrace.c")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Since omap_prm_id_table all have (and expected to have) data entries,
use of_device_get_match_data() to simplify the code.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20220307033736.2075221-1-chi.minghao@zte.com.cn
Simplify the mentioned helper function by removing ternary operator. The
expression that is there outputs the boolean value by itself.
This helper might be used in the hot path so this simplification can
also be considered as micro optimization.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220413153015.453864-15-maciej.fijalkowski@intel.com
Currently, when debugging AF_XDP workloads, one can correlate the -ENXIO
return code as the case that XSK is not in the bound state. Returning
same code from ndo_xsk_wakeup can be misleading and simply makes it
harder to follow what is going on.
Change ENXIOs in stmmac's ndo_xsk_wakeup() implementation to EINVALs, so
that when probing it is clear that something is wrong on the driver
side, not the xsk_{recv,send}msg.
There is a -ENETDOWN that can happen from both kernel/driver sides
though, but I don't have a correct replacement for this on one of the
sides, so let's keep it that way.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220413153015.453864-13-maciej.fijalkowski@intel.com
Currently, when debugging AF_XDP workloads, one can correlate the -ENXIO
return code as the case that XSK is not in the bound state. Returning
same code from ndo_xsk_wakeup can be misleading and simply makes it
harder to follow what is going on.
Change ENXIO in mlx5's ndo_xsk_wakeup() implementation to EINVAL, so
that when probing it is clear that something is wrong on the driver
side, not the xsk_{recv,send}msg.
There is a -ENETDOWN that can happen from both kernel/driver sides
though, but I don't have a correct replacement for this on one of the
sides, so let's keep it that way.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220413153015.453864-12-maciej.fijalkowski@intel.com
Currently, when debugging AF_XDP workloads, one can correlate the -ENXIO
return code as the case that XSK is not in the bound state. Returning
same code from ndo_xsk_wakeup can be misleading and simply makes it
harder to follow what is going on.
Change ENXIOs in ixgbe's ndo_xsk_wakeup() implementation to EINVALs, so
that when probing it is clear that something is wrong on the driver
side, not the xsk_{recv,send}msg.
There is a -ENETDOWN that can happen from both kernel/driver sides
though, but I don't have a correct replacement for this on one of the
sides, so let's keep it that way.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220413153015.453864-11-maciej.fijalkowski@intel.com
Currently, when debugging AF_XDP workloads, one can correlate the -ENXIO
return code as the case that XSK is not in the bound state. Returning
same code from ndo_xsk_wakeup can be misleading and simply makes it
harder to follow what is going on.
Change ENXIOs in i40e's ndo_xsk_wakeup() implementation to EINVALs, so
that when probing it is clear that something is wrong on the driver
side, not the xsk_{recv,send}msg.
There is a -ENETDOWN that can happen from both kernel/driver sides
though, but I don't have a correct replacement for this on one of the
sides, so let's keep it that way.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220413153015.453864-10-maciej.fijalkowski@intel.com
Currently, when debugging AF_XDP workloads, one can correlate the -ENXIO
return code as the case that XSK is not in the bound state. Returning
same code from ndo_xsk_wakeup can be misleading and simply makes it
harder to follow what is going on.
Change ENXIOs in ice's ndo_xsk_wakeup() implementation to EINVALs, so
that when probing it is clear that something is wrong on the driver
side, not the xsk_{recv,send}msg.
There is a -ENETDOWN that can happen from both kernel/driver sides
though, but I don't have a correct replacement for this on one of the
sides, so let's keep it that way.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220413153015.453864-9-maciej.fijalkowski@intel.com
When XSK pool uses need_wakeup feature, correlate -ENOBUFS that was
returned from xdp_do_redirect() with a XSK Rx queue being full. In such
case, terminate the Rx processing that is being done on the current HW
Rx ring and let the user space consume descriptors from XSK Rx queue so
that there is room that driver can use later on.
Introduce new internal return code IXGBE_XDP_EXIT that will indicate case
described above.
Note that it does not affect Tx processing that is bound to the same
NAPI context, nor the other Rx rings.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220413153015.453864-8-maciej.fijalkowski@intel.com
When XSK pool uses need_wakeup feature, correlate -ENOBUFS that was
returned from xdp_do_redirect() with a XSK Rx queue being full. In such
case, terminate the Rx processing that is being done on the current HW
Rx ring and let the user space consume descriptors from XSK Rx queue so
that there is room that driver can use later on.
Introduce new internal return code I40E_XDP_EXIT that will indicate case
described above.
Note that it does not affect Tx processing that is bound to the same
NAPI context, nor the other Rx rings.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220413153015.453864-7-maciej.fijalkowski@intel.com
When XSK pool uses need_wakeup feature, correlate -ENOBUFS that was
returned from xdp_do_redirect() with a XSK Rx queue being full. In such
case, terminate the Rx processing that is being done on the current HW
Rx ring and let the user space consume descriptors from XSK Rx queue so
that there is room that driver can use later on.
Introduce new internal return code ICE_XDP_EXIT that will indicate case
described above.
Note that it does not affect Tx processing that is bound to the same
NAPI context, nor the other Rx rings.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220413153015.453864-6-maciej.fijalkowski@intel.com
ixgbe_run_xdp_zc() suggests to compiler that XDP_REDIRECT is the most
probable action returned from BPF program that AF_XDP has in its
pipeline. Let's also bring this suggestion up to the callsite of
ixgbe_run_xdp_zc() so that compiler will be able to generate more
optimized code which in turn will make branch predictor happy.
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220413153015.453864-5-maciej.fijalkowski@intel.com
ice_run_xdp_zc() suggests to compiler that XDP_REDIRECT is the most
probable action returned from BPF program that AF_XDP has in its
pipeline. Let's also bring this suggestion up to the callsite of
ice_run_xdp_zc() so that compiler will be able to generate more
optimized code which in turn will make branch predictor happy.
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220413153015.453864-4-maciej.fijalkowski@intel.com
Inspired by patch that made xdp_do_redirect() return values for XSKMAP
more meaningful, return -ENXIO instead of -EINVAL for socket being
unbound in xsk_rcv_check() as this is the usual value that is returned
for such event. In turn, it is now possible to easily distinguish what
went wrong, which is a bit harder when for both cases checked, -EINVAL
was returned.
Return codes can be counted in a nice way via bpftrace oneliner that
Jesper has shown:
bpftrace -e 'tracepoint:xdp:xdp_redirect* {@err[-args->err] = count();}'
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20220413153015.453864-3-maciej.fijalkowski@intel.com
The error codes returned by xdp_do_redirect() when redirecting a frame
to an AF_XDP socket has not been very useful. A driver could not
distinguish between different errors. Prior this change the following
codes where used:
Socket not bound or incorrect queue/netdev: EINVAL
XDP frame/AF_XDP buffer size mismatch: ENOSPC
Could not allocate buffer (copy mode): ENOSPC
AF_XDP Rx buffer full: ENOSPC
After this change:
Socket not bound or incorrect queue/netdev: EINVAL
XDP frame/AF_XDP buffer size mismatch: ENOSPC
Could not allocate buffer (copy mode): ENOMEM
AF_XDP Rx buffer full: ENOBUFS
An AF_XDP zero-copy driver can now potentially determine if the
failure was due to a full Rx buffer, and if so stop processing more
frames, yielding to the userland AF_XDP application.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20220413153015.453864-2-maciej.fijalkowski@intel.com
Jie Wang says:
====================
net: ethool: add support to get/set tx push by ethtool -G/g
These three patches add tx push in ring params and adapt the set and get APIs
of ring params.
====================
Link: https://lore.kernel.org/r/20220412020121.14140-1-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds tx push param to hns3 ring param and adapts the set and get
API of ring params. So users can set it by cmd ethtool -G and get it by cmd
ethtool -g.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently these two checks in ethnl_set_rings are added after rtnl_lock()
which will do useless works if the request is invalid.
So this patch moves these checks before the rtnl_lock() to avoid these
costs.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently tx push is a standard driver feature which controls use of a fast
path descriptor push. So this patch extends the ringparam APIs and data
structures to support set/get tx push by ethtool -G/g.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=7gVd
-----END PGP SIGNATURE-----
Merge tag 'block-5.18-2022-04-15' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Moving of lower_48_bits() to the block layer and a fix for the
unaligned_be48 added with that originally (Alexander, Keith)
- Fix a bad WARN_ON() for trim size checking (Ming)
- A polled IO timeout fix for null_blk (Ming)
- Silence IO error printing for dead disks (Christoph)
- Compat mode range fix (Khazhismel)
- NVMe pull request via Christoph:
- Tone down the error logging added this merge window a bit
(Chaitanya Kulkarni)
- Quirk devices with non-unique unique identifiers (Christoph)
* tag 'block-5.18-2022-04-15' of git://git.kernel.dk/linux-block:
block: don't print I/O error warning for dead disks
block/compat_ioctl: fix range check in BLKGETSIZE
nvme-pci: disable namespace identifiers for Qemu controllers
nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202
nvme: add a quirk to disable namespace identifiers
nvme: don't print verbose errors for internal passthrough requests
block: null_blk: end timed out poll request
block: fix offset/size check in bio_trim()
asm-generic: fix __get_unaligned_be48() on 32 bit platforms
block: move lower_48_bits() to block
-----BEGIN PGP SIGNATURE-----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=aTrS
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.18-2022-04-14' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
- Ensure we check and -EINVAL any use of reserved or struct padding.
Although we generally always do that, it's missed in two spots for
resource updates, one for the ring fd registration from this merge
window, and one for the extended arg. Make sure we have all of them
handled. (Dylan)
- A few fixes for the deferred file assignment (me, Pavel)
- Add a feature flag for the deferred file assignment so apps can tell
we handle it correctly (me)
- Fix a small perf regression with the current file position fix in
this merge window (me)
* tag 'io_uring-5.18-2022-04-14' of git://git.kernel.dk/linux-block:
io_uring: abort file assignment prior to assigning creds
io_uring: fix poll error reporting
io_uring: fix poll file assign deadlock
io_uring: use right issue_flags for splice/tee
io_uring: verify pad field is 0 in io_get_ext_arg
io_uring: verify resv is 0 in ringfd register/unregister
io_uring: verify that resv2 is 0 in io_uring_rsrc_update2
io_uring: move io_uring_rsrc_update2 validation
io_uring: fix assign file locking issue
io_uring: stop using io_wq_work as an fd placeholder
io_uring: move apoll->events cache
io_uring: io_kiocb_update_pos() should not touch file for non -1 offset
io_uring: flag the fact that linked file assignment is sane
This Kselftest fixes update consists of a mqueue perf test memory leak
bug fix. mq_perf_tests fail to call CPU_FREE to free memory allocated
by CPU_SET.
-----BEGIN PGP SIGNATURE-----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=+5jP
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"A mqueue perf test memory leak bug fix.
mq_perf_tests failed to call CPU_FREE to free memory allocated by
CPU_SET"
* tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set
- 'perf record --per-thread' mode doesn't have the CPU mask setup, so it
can use it to figure out the number of mmaps, fix it.
- Fix segfault accessing sample_id xyarray out of bounds, noticed while
using Intel PT where we have a dummy event to capture text poke perf
metadata events and we mixup the set of CPUs specified by the user
with the all CPUs map needed for text poke.
- Fix 'perf bench numa' to check if CPU used to bind task is online.
- Fix 'perf bench numa' usage of affinity for machines with more than
1000 CPUs.
- Fix misleading add event PMU debug message, noticed while using the
'intel_pt' PMU.
- Fix error check return value of hashmap__new() in 'perf stat', it must
use IS_ERR().
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYlis4AAKCRCyPKLppCJ+
J7LrAQCow9vLotkRNyYkdgTnGlPa76W2ZVVd52qKs2A62ifVJQD/ewZqBH/JnHf7
UPmkn7B6a4NrEcLiuRAHm1+uLid0swc=
=Nz7z
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.18-2022-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- 'perf record --per-thread' mode doesn't have the CPU mask setup, so
it can use it to figure out the number of mmaps, fix it.
- Fix segfault accessing sample_id xyarray out of bounds, noticed while
using Intel PT where we have a dummy event to capture text poke perf
metadata events and we mixup the set of CPUs specified by the user
with the all CPUs map needed for text poke.
- Fix 'perf bench numa' to check if CPU used to bind task is online.
- Fix 'perf bench numa' usage of affinity for machines with more than
1000 CPUs.
- Fix misleading add event PMU debug message, noticed while using the
'intel_pt' PMU.
- Fix error check return value of hashmap__new() in 'perf stat', it
must use IS_ERR().
* tag 'perf-tools-fixes-for-v5.18-2022-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf bench: Fix numa bench to fix usage of affinity for machines with #CPUs > 1K
perf bench: Fix numa testcase to check if CPU used to bind task is online
perf record: Fix per-thread option
perf tools: Fix segfault accessing sample_id xyarray
perf stat: Fix error check return value of hashmap__new(), must use IS_ERR()
perf tools: Fix misleading add event PMU debug message
Newer platforms have DSS that aren't necessarily available for both
geometry and compute, two queries will need to exist. This introduces
the first, when passing a valid engine class and engine instance in the
flags returns a topology describing geometry.
Based on past discussion, we currently only support this new query item
on Xe_HP and beyond; earlier platforms do not need to worry about
geometry and compute pipelines having access to different topology and
should continue to use the existing topology query.
v2: fix white space errors
v3: change flags from hosting 2 8 bit numbers to holding a
i915_engine_class_instance struct
v4: add error if non rcs engine passed.
v5 (by MattR):
- Improve kerneldoc and cross references to related structs/enums.
(Daniel)
- Clarify that geometry query is only supported on render engines
(Francisco)
- Clarify that the new query is only supported on Xe_HP+.
- Fix checkpatch warnings.
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Francisco Jerez <currojerez@riseup.net>
UMD (mesa): https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/14143
Testcase: igt@i915_query@test-query-geometry-subslices
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20220414192230.749771-4-matthew.d.roper@intel.com
