The driver can receive an empty hw_config, so mark as valid if
successfully read from device tree/ACPI or set by the driver itself.
Platforms not marked with a valid hw config will not be supported.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-3-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both ASoC and HDA require to configure the GPIOs and Boost, so
create a single shared struct for hardware configuration.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220413083728.10730-2-tanureal@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit ebe48d368e ("esp: Fix possible buffer overflow in ESP
transformation") tried to fix skb_page_frag_refill usage in ESP by
capping allocsize to 32k, but that doesn't completely solve the issue,
as skb_page_frag_refill may return a single page. If that happens, we
will write out of bounds, despite the check introduced in the previous
patch.
This patch forces COW in cases where we would end up calling
skb_page_frag_refill with a size larger than a page (first in
esp_output_head with tailen, then in esp_output_tail with
skb->data_len).
Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add support for USB3 QMP PHY found in SDX65 platform. SDX65 uses
version 5.0.0 of the QMP PHY IP.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1649740652-17515-3-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
It is possible that the recovery work might be running while the freeze
gets executed (during hibernation etc.,). Currently, we don't powerdown
the stack if it is not up but if the recovery work completes after freeze,
then the device will be up afterwards. This will not be a sane situation.
So let's flush the recovery worker before trying to powerdown the device.
Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Bhaumik Vasav Bhatt <quic_bbhatt@quicinc.com>
Reviewed-by: Bhaumik Vasav Bhatt <quic_bbhatt@quicinc.com>
Link: https://lore.kernel.org/r/20220408150039.17297-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
During hibernation process, once thaw() stage completes, the MHI endpoint
devices will be in M0 state post recovery. After that, the devices will be
powered down so that the system can enter the target sleep state. During
this stage, the PCI core will put the devices in D3hot. But this transition
is allowed by the MHI spec. The devices can only enter D3hot when it is in
M3 state.
So for fixing this issue, let's add the poweroff() callback that will get
executed before putting the system in target sleep state during
hibernation. This callback will power down the device properly so that it
could be restored during restore() or thaw() stage.
Cc: stable@vger.kernel.org
Fixes: 5f0c2ee1fe ("bus: mhi: pci-generic: Fix hibernation")
Reported-by: Hemant Kumar <quic_hemantk@quicinc.com>
Suggested-by: Hemant Kumar <quic_hemantk@quicinc.com>
Link: https://lore.kernel.org/r/20220405125907.5644-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
In the previous fix, we increased the max buffer bytes from 1MB to 4MB
so that we can use bigger buffers for the modern HiFi devices with
higher rates, more channels and wider formats. OTOH, extending this
has a concern that too big buffer is allowed for the lower rates, less
channels and narrower formats; when an application tries to allocate
as big buffer as possible, it'll lead to unexpectedly too huge size.
Also, we had a problem about the inconsistent max buffer and period
bytes for the implicit feedback mode when both streams have different
channels. This was fixed by the (relatively complex) patch to reduce
the max buffer and period bytes accordingly.
This is an alternative fix for those, a patch to kill two birds with
one stone (*): instead of increasing the max buffer bytes blindly and
applying the reduction per channels, we simply use the hw constraints
for the buffer and period "time". Meanwhile the max buffer and period
bytes are set unlimited instead.
Since the inconsistency of buffer (and period) bytes comes from the
difference of the channels in the tied streams, as long as we care
only about the buffer (and period) time, it doesn't matter; the buffer
time is same for different channels, although we still allow higher
buffer size. Similarly, this will allow more buffer bytes for HiFi
devices while it also keeps the reasonable size for the legacy
devices, too.
As of this patch, the max period and buffer time are set to 1 and 2
seconds, which should be large enough for all possible use cases.
(*) No animals were harmed in the making of this patch.
Fixes: 98c27add5d ("ALSA: usb-audio: Cap upper limits of buffer/period bytes for implicit fb")
Fixes: fee2ec8cce ("ALSA: usb-audio: Increase max buffer size")
Link: https://lore.kernel.org/r/20220412130740.18933-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are four types of kmalloc_caches: KMALLOC_NORMAL, KMALLOC_CGROUP,
KMALLOC_RECLAIM, and KMALLOC_DMA. While the first three types are
created using new_kmalloc_cache(), KMALLOC_DMA caches are created in a
separate logic. Let KMALLOC_DMA caches be also created using
new_kmalloc_cache(), to enhance readability.
Historically, there were only KMALLOC_NORMAL caches and KMALLOC_DMA
caches in the first place, and they were initialized in two separate
logics. However, when KMALLOC_RECLAIM was introduced in v4.20 via
commit 1291523f2c ("mm, slab/slub: introduce kmalloc-reclaimable
caches") and KMALLOC_CGROUP was introduced in v5.14 via
commit 494c1dfe85 ("mm: memcg/slab: create a new set of kmalloc-cg-<n>
caches"), their creations were merged with KMALLOC_NORMAL's only.
KMALLOC_DMA creation logic should be merged with them, too.
By merging KMALLOC_DMA initialization with other types, the following
two changes might occur:
1. The order dma-kmalloc-<n> caches added in slab_cache list may be
sorted by size. i.e. the order they appear in /proc/slabinfo may change
as well.
2. slab_state will be set to UP after KMALLOC_DMA is created.
In case of slub, freelist randomization is dependent on slab_state>=UP,
and therefore KMALLOC_DMA cache's freelist will not be randomized in
creation, but will be deferred to init_freelist_randomization().
Co-developed-by: JaeSang Yoo <jsyoo5b@gmail.com>
Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com>
Signed-off-by: Ohhoon Kwon <ohkwon1043@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220410162511.656541-1-ohkwon1043@gmail.com
In allocate_slab(), __GFP_NOFAIL flag is removed twice when trying
higher-order allocation. Remove it.
Signed-off-by: Jiyoup Kim <lakroforce@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220409150538.1264-1-lakroforce@gmail.com
setup_object_debug() and setup_object() has unused parameter, "struct
slab *slab". Remove it.
By the commit 3ec0974210 ("SLUB: Simplify debug code"),
setup_object_debug() were introduced to refactor previous code blocks
in the setup_object(). Previous code used SlabDebug() to init_object()
and init_tracking(). As the SlabDebug() takes "struct page *page" as
argument, the setup_object_debug() checks flag of "struct kmem_cache *s"
which doesn't require "struct page *page".
As the struct page were changed into struct slab by commit bb192ed9aa
("mm/slub: Convert most struct page to struct slab by spatch"), but it's
still unused parameter.
Suggested-by: Ohhoon Kwon <ohkwon1043@gmail.com>
Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20220411072534.3372768-1-jsyoo5b@gmail.com
This commit enables XFS module to work with fs instances having 64-bit
per-inode extent counters by adding XFS_SB_FEAT_INCOMPAT_NREXT64 flag to the
list of supported incompat feature flags.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
The following changes are made to enable userspace to obtain 64-bit extent
counters,
1. Carve out a new 64-bit field xfs_bulkstat->bs_extents64 from
xfs_bulkstat->bs_pad[] to hold 64-bit extent counter.
2. Define the new flag XFS_BULK_IREQ_BULKSTAT for userspace to indicate that
it is capable of receiving 64-bit extent counters.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
A future commit will add a new XFS_IBULK flag which will not have a
corresponding XFS_IWALK flag. In preparation for the change, this commit
separates XFS_IBULK_* flags from XFS_IWALK_* flags.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
This commit enables upgrading existing inodes to use large extent counters
provided that underlying filesystem's superblock has large extent counter
feature enabled.
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
The maximum file size that can be represented by the data fork extent counter
in the worst case occurs when all extents are 1 block in length and each block
is 1KB in size.
With XFS_MAX_EXTCNT_DATA_FORK_SMALL representing maximum extent count and with
1KB sized blocks, a file can reach upto,
(2^31) * 1KB = 2TB
This is much larger than the theoretical maximum size of a directory
i.e. XFS_DIR2_SPACE_SIZE * 3 = ~96GB.
Since a directory's inode can never overflow its data fork extent counter,
this commit removes all the overflow checks associated with
it. xfs_dinode_verify() now performs a rough check to verify if a diretory's
data fork is larger than 96GB.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandan.babu@oracle.com>
Store the address and the data pointer for calls to rtw_writeN() and
rtw_write8() in local variables. This avoids long lines and improves
readability.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variables i and offset in block_write() are set in the code
before they are used. Remove the unneeded initializations.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For cleaner code and improved readability we can reduce the number
of local variables in block_write(). Use a single variable for block
size, number of blocks and remaining size.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The second parameter of write_fw(), page_write() and block_write()
is a void pointer, but we always pass an u8 pointer. We can convert
this parameter to an u8 pointer. The pointer is not changed in the
functions, so we can safely remove the local variable bufferPtr.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220412185754.8695-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a deadlock in rtw_joinbss_event_prehandle(), which is shown below:
(Thread 1) | (Thread 2)
| _set_timer()
rtw_joinbss_event_prehandle()| mod_timer()
spin_lock_bh() //(1) | (wait a time)
... | rtw_join_timeout_handler()
| _rtw_join_timeout_handler()
del_timer_sync() | spin_lock_bh() //(2)
(wait timer to stop) | ...
We hold pmlmepriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_joinbss_event_prehandle() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() to
spin_lock_irq() in _rtw_join_timeout_handler() in order to
prevent deadlock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409072135.74248-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a deadlock in rtw_joinbss_event_prehandle(), which is shown
below:
(Thread 1) | (Thread 2)
| _set_timer()
rtw_joinbss_event_prehandle()| mod_timer()
spin_lock_bh() //(1) | (wait a time)
... | _rtw_join_timeout_handler()
del_timer_sync() | spin_lock_bh() //(2)
(wait timer to stop) | ...
We hold pmlmepriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_joinbss_event_prehandle() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() to
spin_lock_irq() in _rtw_join_timeout_handler() in order to
prevent deadlock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409064953.67420-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a deadlock in rtw_surveydone_event_callback(),
which is shown below:
(Thread 1) | (Thread 2)
| _set_timer()
rtw_surveydone_event_callback()| mod_timer()
spin_lock_bh() //(1) | (wait a time)
... | rtw_scan_timeout_handler()
del_timer_sync() | spin_lock_bh() //(2)
(wait timer to stop) | ...
We hold pmlmepriv->lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler
also need pmlmepriv->lock in position (2) of thread 2.
As a result, rtw_surveydone_event_callback() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_bh(), which could let timer handler to obtain
the needed lock. What`s more, we change spin_lock_bh() in
rtw_scan_timeout_handler() to spin_lock_irq(). Otherwise,
spin_lock_bh() will also cause deadlock() in timer handler.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220409061836.60529-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adhere to linux coding style.
Reported by checkpatch:
spaces preferred around that '{operator}'.
Signed-off-by: Mahak Gupta <mahak_g@cs.iitr.ac.in>
Link: https://lore.kernel.org/r/20220413054517.6343-1-mahak_g@cs.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the optional remove callback for the soc_codec_dev_gbaudio
structure. The only place it is referenced is
snd_soc_component_remove() which is only called if the sound_component
pointer is non-null. The null function pointers here can be optionally
ommitted. When a sound component is registered this way, the remove
callback is optional. We can safely remove the whole gbcodec_remove
function, which used to be an empty function with a void return type.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Link: https://lore.kernel.org/r/12037ae2502ad7d0311bcdf2178c3d2156293236.1649824370.git.jhpark1013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Else is not necessary after return and break statements, hence remove
it.
Reported by checkpatch:
WARNING: else is not generally useful after a break or return
Signed-off-by: Mahak Gupta <mahak_g@cs.iitr.ac.in>
Link: https://lore.kernel.org/r/20220413052759.4859-1-mahak_g@cs.iitr.ac.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove compat ALSA card, which has overlapping functionality with the
two other cards described by the driver (HDMI and headphones)
This handles TODO item "Revisit multi-cards options and PCM route mixer
control".
Move the S/PDIF device that was part of the compat ALSA card to the HDMI
card.
Only enable headphones card by default, because HDMI breaks when using
both vc4 and bcm2835-audio with HDMI card enabled.
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Link: https://lore.kernel.org/r/20220408150359.26661-1-athierry@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of "oneOf:" choices, use "allOf:" and "if:" to define clocks,
clock-names, resets, and reset-names that can be taken by the compatible
string.
The order of clock-names and reset-names doesn't change here.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1648637715-19262-6-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is no clock-names and reset-names for Pro5 SoC, that should have two
properties, "gio" and "link" like usb3-ssphy.
And according to the existing PXs2 devicetree, the clock-names for PXs2 SoC
should have "link" and "phy", and minItems of clocks should be 2.
Fixes: 134ab2845a ("dt-bindings: phy: Convert UniPhier USB3-PHY conroller to json-schema")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1648637715-19262-5-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The usb-device doesn't need "vbus-supply" property, so the property should
be removed from required.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1648637715-19262-3-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
UniPhier USB2 PHY controller can apply vbus-supply.
Add "vbus-supply" property to fix the following warning.
uniphier-pro4-ace.dtb: usb-glue: phy@2: 'vbus-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/phy/socionext,uniphier-usb2-phy.yaml
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1648637715-19262-2-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DCTL is short for D-MAC control that V1 chip uses this H2C to configure
security CAM. Implement the callers in next patch.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220413010804.8941-3-pkshih@realtek.com
In order to support new chip that has capability of 160M, we need new
format to fill new information, so add a new V1 ID for newer use. Since
most fields are the same, fill fields according to the function ID of chip.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220413010804.8941-2-pkshih@realtek.com
The recent change for memory allocator replaced the SG-buffer handling
helper for x86 with the standard non-contiguous page handler. This
works for most cases, but there is a corner case I obviously
overlooked, namely, the fallback of non-contiguous handler without
IOMMU. When the system runs without IOMMU, the core handler tries to
use the continuous pages with a single SGL entry. It works nicely for
most cases, but when the system memory gets fragmented, the large
allocation may fail frequently.
Ideally the non-contig handler could deal with the proper SG pages,
it's cumbersome to extend for now. As a workaround, here we add new
types for (minimalistic) SG allocations, instead, so that the
allocator falls back to those types automatically when the allocation
with the standard API failed.
BTW, one better (but pretty minor) improvement from the previous
SG-buffer code is that this provides the proper mmap support without
the PCM's page fault handling.
Fixes: 2c95b92ecd ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)")
BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2272
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1198248
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220413054808.7547-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds the secure capability OPTEE_FFA_SEC_CAP_ARG_OFFSET to indicate that
OP-TEE with FF-A can support an argument struct at a non-zero offset into
a passed shared memory object.
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Adds OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_REGD_ARG where
the struct optee_msg_arg to be used for RPC is appended in the memory
following the normal argument struct optee_msg_arg. This is an
optimization to avoid caching the RPC argument struct while still
maintaining similar performance as if it was cached.
OPTEE_SMC_CALL_WITH_REGD_ARG optimized one step further by using a
registered shared memory object instead. It's in other aspects identical
to OPTEE_SMC_CALL_WITH_RPC_ARG.
The presence of OPTEE_SMC_CALL_WITH_RPC_ARG and
OPTEE_SMC_CALL_WITH_REGD_ARG is indicated by the new
OPTEE_SMC_SEC_CAP_RPC_ARG bit returned by
OPTEE_SMC_EXCHANGE_CAPABILITIES. OPTEE_SMC_EXCHANGE_CAPABILITIES also
reports the number of arguments that the RPC argument struct must have
room for.
OPTEE_SMC_CALL_WITH_RPC_ARG and OPTEE_SMC_CALL_WITH_ARG can be used
interleaved with difference that when OPTEE_SMC_CALL_WITH_RPC_ARG is
used the RPC argument struct to be used is the one appended to the
normal argument struct. The same is true for
OPTEE_SMC_CALL_WITH_REGD_ARG.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Renames the field rpc_arg_count in struct optee to rpc_param_count.
Function parameter names and local variables are also renamed to match.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
