Replace the magic numbers by macros which are already defined. It seems
the original commit missed to use them.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MDIO controller has support to release the internal PHYs from reset
by specifying a second memory resource. This is different between the
currently supported SparX-5 and the LAN966x. Add a new compatible to
distinguish between these two.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DSA probing is atypical because a tree of devices must probe all at
once, so out of N switches which call dsa_tree_setup_routing_table()
during probe, for (N - 1) of them, "complete" will return false and they
will exit probing early. The Nth switch will set up the whole tree on
their behalf.
The implication is that for (N - 1) switches, the driver binds to the
device successfully, without doing anything. When the driver is bound,
the ->shutdown() method may run. But if the Nth switch has failed to
initialize the tree, there is nothing to do for the (N - 1) driver
instances, since the slave devices have not been created, etc. Moreover,
dsa_switch_shutdown() expects that the calling @ds has been in fact
initialized, so it jumps at dereferencing the various data structures,
which is incorrect.
Avoid the ensuing NULL pointer dereferences by simply checking whether
the Nth switch has previously set "ds->setup = true" for the switch
which is currently shutting down. The entire setup is serialized under
dsa2_mutex which we already hold.
Fixes: 0650bf52b3 ("net: dsa: be compatible with masters which unregister on shutdown")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220318195443.275026-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During NAT, a tuple collision may occur. When this happens, openvswitch
will make a second pass through NAT which will perform additional packet
modification. This will update the skb data, but not the flow key that
OVS uses. This means that future flow lookups, and packet matches will
have incorrect data. This has been supported since
5d50aa83e2 ("openvswitch: support asymmetric conntrack").
That commit failed to properly update the sw_flow_key attributes, since
it only called the ovs_ct_nat_update_key once, rather than each time
ovs_ct_nat_execute was called. As these two operations are linked, the
ovs_ct_nat_execute() function should always make sure that the
sw_flow_key is updated after a successful call through NAT infrastructure.
Fixes: 5d50aa83e2 ("openvswitch: support asymmetric conntrack")
Cc: Dumitru Ceara <dceara@redhat.com>
Cc: Numan Siddique <nusiddiq@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220318124319.3056455-1-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When I/O fails in one of the currently connected DFS targets, retry it
from other targets as specified in MS-DFSC "3.1.5.2 I/O Operation to
+Target Fails with an Error Other Than STATUS_PATH_NOT_COVERED."
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=0YvJ
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20220321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit update from Paul Moore:
"Just one audit patch queued for v5.18:
- Change the AUDIT_TIME_* record generation so that they are
generated at syscall exit time and subject to all of the normal
syscall exit filtering.
This should help reduce noise and ensure those records which are
most relevant to the admin's audit configuration are recorded in
the audit log"
* tag 'audit-pr-20220321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: log AUDIT_TIME_* records only from rules
-----BEGIN PGP SIGNATURE-----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=5E1v
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20220321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got a number of SELinux patches queued up, the highlights are:
- Fixup the security_fs_context_parse_param() LSM hook so it executes
all of the LSM hook implementations unless a serious error occurs.
We also correct the SELinux hook implementation so that it returns
zero on success.
- In addition to a few SELinux mount option parsing fixes, we
simplified the parsing by moving it earlier in the process.
The logic was that it was unlikely an admin/user would use the new
mount API and not have the policy loaded before passing the SELinux
options.
- Properly fixed the LSM/SELinux/SCTP hooks with the addition of the
security_sctp_assoc_established() hook.
This work was done in conjunction with the netdev folks and should
complete the move of the SCTP labeling from the endpoints to the
associations.
- Fixed a variety of sparse warnings caused by changes in the "__rcu"
markings of some core kernel structures.
- Ensure we access the superblock's LSM security blob using the
stacking-safe accessors.
- Added the ability for the kernel to always allow FIOCLEX and
FIONCLEX if the "ioctl_skip_cloexec" policy capability is
specified.
- Various constifications improvements, type casting improvements,
additional return value checks, and dead code/parameter removal.
- Documentation fixes"
* tag 'selinux-pr-20220321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (23 commits)
selinux: shorten the policy capability enum names
docs: fix 'make htmldocs' warning in SCTP.rst
selinux: allow FIOCLEX and FIONCLEX with policy capability
selinux: use correct type for context length
selinux: drop return statement at end of void functions
security: implement sctp_assoc_established hook in selinux
security: add sctp_assoc_established hook
selinux: parse contexts for mount options early
selinux: various sparse fixes
selinux: try to use preparsed sid before calling parse_sid()
selinux: Fix selinux_sb_mnt_opts_compat()
LSM: general protection fault in legacy_parse_param
selinux: fix a type cast problem in cred_init_security()
selinux: drop unused macro
selinux: simplify cred_init_security
selinux: do not discard const qualifier in cast
selinux: drop unused parameter of avtab_insert_node
selinux: drop cast to same type
selinux: enclose macro arguments in parenthesis
selinux: declare name parameter of hash_eval const
...
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYji6mxQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5bbvAQDB0uFJXS+FutMZSdfoXdvoV36piSyV
KNEo+sM0Ie0FTQEAtHnMZbIB2Tc5szJXaxgDbr6XbRKW4aaJonkvnYF93QQ=
=ZuAU
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"Except for extending the 'encrypted' key type to support user provided
data, the rest is code cleanup, __setup() usage bug fix, and a trivial
change"
* tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
MAINTAINERS: add missing security/integrity/platform_certs
EVM: fix the evm= __setup handler return value
KEYS: encrypted: Instantiate key with user-provided decrypted data
ima: define ima_max_digest_data struct without a flexible array variable
ima: rename IMA_ACTION_FLAGS to IMA_NONACTION_FLAGS
ima: Return error code obtained from securityfs functions
MAINTAINERS: add missing "security/integrity" directory
ima: Fix trivial typos in the comments
Fix incorrect type in assignment of ipv6 port for audit
-----BEGIN PGP SIGNATURE-----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=j/eV
-----END PGP SIGNATURE-----
Merge tag 'Smack-for-5.18' of https://github.com/cschaufler/smack-next
Pull smack update from Casey Schaufler:
"A single fix to repair an incorrect use of ntohs() in IPv6 audit code.
It's very minor and went unnoticed until lkp found it.
It's been in next and passes all tests"
* tag 'Smack-for-5.18' of https://github.com/cschaufler/smack-next:
Fix incorrect type in assignment of ipv6 port for audit
Pull watch_queue fixes from David Howells:
"Here are fixes for a couple more watch_queue bugs, both found by syzbot:
- Fix error cleanup in watch_queue_set_size() where it tries to clean
up all the pointers in the page list, even if they've not been
allocated yet[1]. Unfortunately, __free_page() doesn't treat a NULL
pointer as being "do nothing".
A second report[2] looks like it's probably the same bug, but on
arm64 rather than x86_64, but there's no reproducer.
- Fix a missing kfree in free_watch() to actually free the watch[3]"
Link: https://lore.kernel.org/r/000000000000b1807c05daad8f98@google.com/ [1]
Link: https://lore.kernel.org/r/000000000000035b9c05daae8a5e@google.com/ [2]
Link: https://lore.kernel.org/r/000000000000bc8eaf05dab91c63@google.com/ [3]
* 'keys-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
watch_queue: Actually free the watch
watch_queue: Fix NULL dereference in error cleanup
- Various buffer and array bounds related fixes
-----BEGIN PGP SIGNATURE-----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=gm8R
-----END PGP SIGNATURE-----
Merge tag 'bounds-fixes-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull bounds fixes from Kees Cook:
"These are a handful of buffer and array bounds fixes that I've been
carrying in preparation for the coming memcpy improvements and the
enabling of '-Warray-bounds' globally.
There are additional similar fixes in other maintainer's trees, but
these ended up getting carried by me. :)"
* tag 'bounds-fixes-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
media: omap3isp: Use struct_group() for memcpy() region
tpm: vtpm_proxy: Check length to avoid compiler warning
alpha: Silence -Warray-bounds warnings
m68k: cmpxchg: Dereference matching size
intel_th: msu: Use memset_startat() for clearing hw header
KVM: x86: Replace memset() "optimization" with normal per-field writes
- Convert overflow selftest to KUnit
- Convert stackinit selftest to KUnit
- Implement size_t saturating arithmetic helpers
- Allow struct_size() to be used in initializers
-----BEGIN PGP SIGNATURE-----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=eRcK
-----END PGP SIGNATURE-----
Merge tag 'overflow-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull overflow updates from Kees Cook:
"These changes come in roughly two halves: support of Gustavo A. R.
Silva's struct_size() work via additional helpers for catching
overflow allocation size calculations, and conversions of selftests to
KUnit (which includes some tweaks for UML + Clang):
- Convert overflow selftest to KUnit
- Convert stackinit selftest to KUnit
- Implement size_t saturating arithmetic helpers
- Allow struct_size() to be used in initializers"
* tag 'overflow-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib: stackinit: Convert to KUnit
um: Allow builds with Clang
lib: overflow: Convert to Kunit
overflow: Provide constant expression struct_size
overflow: Implement size_t saturating arithmetic helpers
test_overflow: Regularize test reporting output
- Handle unusual AT_PHDR offsets (Akira Kawata)
- Fix initial mapping size when PT_LOADs are not ordered (Alexey Dobriyan)
- Move more code under CONFIG_COREDUMP (Alexey Dobriyan)
- Fix missing mmap_lock in file_files_note (Eric W. Biederman)
- Remove a.out support for alpha and m68k (Eric W. Biederman)
- Include first pages of non-exec ELF libraries in coredump (Jann Horn)
- Don't write past end of notes for regset gap in coredump (Rick Edgecombe)
- Comment clean-ups (Tom Rix)
- Force single empty string when argv is empty (Kees Cook)
- Add NULL argv selftest (Kees Cook)
- Properly redefine PT_GNU_* in terms of PT_LOOS (Kees Cook)
- MAINTAINERS: Update execve entry with tree (Kees Cook)
- Introduce initial KUnit testing for binfmt_elf (Kees Cook)
-----BEGIN PGP SIGNATURE-----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=SyEY
-----END PGP SIGNATURE-----
Merge tag 'execve-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
"Execve and binfmt updates.
Eric and I have stepped up to be the active maintainers of this area,
so here's our first collection. The bulk of the work was in coredump
handling fixes; additional details are noted below:
- Handle unusual AT_PHDR offsets (Akira Kawata)
- Fix initial mapping size when PT_LOADs are not ordered (Alexey
Dobriyan)
- Move more code under CONFIG_COREDUMP (Alexey Dobriyan)
- Fix missing mmap_lock in file_files_note (Eric W. Biederman)
- Remove a.out support for alpha and m68k (Eric W. Biederman)
- Include first pages of non-exec ELF libraries in coredump (Jann
Horn)
- Don't write past end of notes for regset gap in coredump (Rick
Edgecombe)
- Comment clean-ups (Tom Rix)
- Force single empty string when argv is empty (Kees Cook)
- Add NULL argv selftest (Kees Cook)
- Properly redefine PT_GNU_* in terms of PT_LOOS (Kees Cook)
- MAINTAINERS: Update execve entry with tree (Kees Cook)
- Introduce initial KUnit testing for binfmt_elf (Kees Cook)"
* tag 'execve-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_elf: Don't write past end of notes for regset gap
a.out: Stop building a.out/osf1 support on alpha and m68k
coredump: Don't compile flat_core_dump when coredumps are disabled
coredump: Use the vma snapshot in fill_files_note
coredump/elf: Pass coredump_params into fill_note_info
coredump: Remove the WARN_ON in dump_vma_snapshot
coredump: Snapshot the vmas in do_coredump
coredump: Move definition of struct coredump_params into coredump.h
binfmt_elf: Introduce KUnit test
ELF: Properly redefine PT_GNU_* in terms of PT_LOOS
MAINTAINERS: Update execve entry with more details
exec: cleanup comments
fs/binfmt_elf: Refactor load_elf_binary function
fs/binfmt_elf: Fix AT_PHDR for unusual ELF files
binfmt: move more stuff undef CONFIG_COREDUMP
selftests/exec: Test for empty string on NULL argv
exec: Force single empty string when argv is empty
coredump: Also dump first pages of non-executable ELF libraries
ELF: fix overflow in total mapping size calculation
sbitmap has been used in scsi for replacing atomic operations on
sdev->device_busy, so IOPS on some fast scsi storage can be improved.
However, sdev->device_busy can be changed in fast path, so we have to
allocate the sb->map statically. sdev->device_busy has been capped to 1024,
but some drivers may configure the default depth as < 8, then
cause each sbitmap word to hold only one bit. Finally 1024 * 128(
sizeof(sbitmap_word)) bytes is needed for sb->map, given it is order 5
allocation, sometimes it may fail.
Avoid the issue by using kvzalloc_node() for allocating sb->map.
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220316012708.354668-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus types,
causing updates to most SPI device drivers. The branch with that on has
been cross merged with a couple of other trees which added new SPI
drivers this cycle, I'm not expecting any build issues resulting from
the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4b+8ACgkQJNaLcl1U
h9AB+Qf/WhPzDSCdhK1repnSmEpRNs/J6hItmY2H6pTQaWALpfTB0+p1Nb5tAotg
fHbu6a2AsiiwWt+tDal44GFYhS0CDSOT4hqgLV8msyDDPPJqqr7A2dbu7YrCjTVI
TgNZNwxW7c2LgqBXR9GV7NPWYoxYxveoYh+L+05MSuSQxSOvPl6LUZiZPnPufQM6
dCpEh19atrtasFg3rFnslWBd2C3h8hb6YT7vUZs9gxhg3FvSgpYQwzz5SfFgHXK6
Rg07m8fDTSjf2qo1C4pc/d1Ni1xBe7aHKMtjtR3jJ4q8QqiawfCcvvOep/Iaec1+
s3qnDthohWMJoF1W6ERf3HiAgNIfhg==
=4tlR
-----END PGP SIGNATURE-----
Merge tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The overwhelming bulk of this pull request is a change from Uwe
Kleine-König which changes the return type of the remove() function to
void as part of some wider work he's doing to do this for all bus
types, causing updates to most SPI device drivers. The branch with
that on has been cross merged with a couple of other trees which added
new SPI drivers this cycle, I'm not expecting any build issues
resulting from the change.
Otherwise it's been a relatively quiet release with some new device
support, a few minor features and the welcome completion of the
conversion of the subsystem to use GPIO descriptors rather than
numbers:
- Change return type of remove() to void.
- Completion of the conversion of SPI controller drivers to use GPIO
descriptors rather than numbers.
- Quite a few DT schema conversions.
- Support for multiple SPI devices on a bus in ACPI systems.
- Big overhaul of the PXA2xx SPI driver.
- Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and
MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and
Sunplus SP7021"
[ And this is obviously where that spi change that snuck into the
regulator tree _should_ have been :^]
* tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits)
spi: fsi: Implement a timeout for polling status
spi: Fix erroneous sgs value with min_t()
spi: tegra20: Use of_device_get_match_data()
spi: mediatek: add ipm design support for MT7986
spi: Add compatible for MT7986
spi: sun4i: fix typos in comments
spi: mediatek: support tick_delay without enhance_timing
spi: Update clock-names property for arm pl022
spi: rockchip-sfc: fix platform_get_irq.cocci warning
spi: s3c64xx: Add spi port configuration for Tesla FSD SoC
spi: dt-bindings: samsung: Add fsd spi compatible
spi: topcliff-pch: Prevent usage of potentially stale DMA device
spi: tegra210-quad: combined sequence mode
spi: tegra210-quad: add acpi support
spi: npcm-fiu: Fix typo ("npxm")
spi: Fix Tegra QSPI example
spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ
spi: cadence: fix platform_get_irq.cocci warning
spi: Update NXP Flexspi maintainer details
dt-bindings: mfd: maxim,max77802: Convert to dtschema
...
Quite a quiet release for the regulator API, mainly a few new drivers
plus a lot of fixes for the Raspberry Pi panel driver. There's also a
SPI commit in here which I managed to apply to the wrong tree and then
didn't notice until there were too many commits on top of it, sorry
about that.
- Make it easier to use the virtual consumer test driver with DT
systems.
- Substantial overhaul providing various fixes and robustness
improvements for the Raspberry Pi panel driver.
- Support for Qualcomm PMX65 and SDX65, Richtek RT5190A, and Texas
Instruments TPS62864x
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4bYcACgkQJNaLcl1U
h9B0sQf+NvpOeni3N2z1vRS+b2k7r/qX0GU2X2Bs3FnulYRsLqGp9eg4dZvNCc1Z
XhVVqSWZUvI9TEpG5RRuGmTkb/3cwYzURkL1P4EXMrSNCmImRgZ9aTfF7Dc3wNg8
UcomWtsVEHMGNmfvU7Kazk4fVGtb+I1/lYf1i/jjB21108Qzk59CDdhEjQl0DMuZ
3ZNu7YC5MQN6QbjmEMdn3mSNilVyn67WBsCVePi4ebSK/GFZXUtxOtRWAQYTtej8
t0XOd5Z5iGpszohmKi78CdZvA4NtugPoavLbvpd1pRA/9A0PgMZq5vkmJdwW5Nwe
oMMMvJP1yBVLknl0pl7gTibdizoHzQ==
=U2e/
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite a quiet release for the regulator API, mainly a few new drivers
plus a lot of fixes for the Raspberry Pi panel driver.
There's also a SPI commit in here which I managed to apply to the
wrong tree and then didn't notice until there were too many commits on
top of it, sorry about that.
- Make it easier to use the virtual consumer test driver with DT
systems.
- Substantial overhaul providing various fixes and robustness
improvements for the Raspberry Pi panel driver.
- Support for Qualcomm PMX65 and SDX65, Richtek RT5190A, and Texas
Instruments TPS62864x"
* tag 'regulator-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (26 commits)
regulator: qcom-rpmh: Add support for SDX65
regulator: dt-bindings: Add PMX65 compatibles
regulator: vctrl: Use min() instead of doing it manually
regulator: rt5190a: Add support for Richtek RT5190A PMIC
regulator: Add bindings for Richtek RT5190A PMIC
regulator: Convert TPS62360 binding to json-schema
regulator: cleanup comments
regulator: virtual: add devicetree support
regulator: virtual: warn against production use
regulator: virtual: use dev_err_probe()
regulator: tps62864: Fix bindings for SW property
regulator: Add support for TPS6286x
regulator: Add bindings for TPS62864x
regulator/rpi-panel-attiny: Use two transactions for I2C read
regulator/rpi-panel-attiny: Use the regmap cache
regulator: rpi-panel: Remove get_brightness hook
regulator: rpi-panel: Add GPIO control for panel and touch resets
regulator: rpi-panel: Convert to drive lines directly
regulator: rpi-panel: Ensure the backlight is off during probe.
regulator: rpi-panel: Serialise operations.
...
A couple of small fixes, plus some new features that enable us to handle
devices that reformat register addresses depending on the bus used to
handle the control interface more gracefully.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmI4aVQACgkQJNaLcl1U
h9DH7Qf/UfcjSp9MbQ7vZ+uuSQFjcRSSKri0VzFSETAaXBSyDOF43L/3dk60xDo5
+4Om4LX3LZvA387I3bctPaij8fNp+X1bYr2pWUbh/FnJ+fS7PUfzXbQXkh/tKsMP
qhYCcrWVBnGTj0OZAuazYW79V1LolBGC5+YjDRipbcwZhqNVWZKuWVYUhLOduZ5G
5n5PxUyPnDEYF6ixJQq2QiCA6Pb/BSPgviaEHVxeLWxs8IOtq+9u69ijecfDYiwD
vMpFlOnPoy+Bpu7gnU2LhDZ/Nmxvi22BtRxt4qtmC3lTq9Cf/Xrtm2En3aaRsero
SsLc0ZaHkt6W9V5O0yFNrjWLslTAJg==
=3oe7
-----END PGP SIGNATURE-----
Merge tag 'regmap-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"A couple of small fixes, plus some new features that enable us to
handle devices that reformat register addresses depending on the bus
used to handle the control interface more gracefully"
* tag 'regmap-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: allow a defined reg_base to be added to every address
regmap: add configurable downshift for addresses
regmap: irq: cleanup comments
regmap-irq: Fix typo in comment
New drivers
- Driver for Texas Instruments TMP464 and TMP468
- Driver for Vicor PLI1209BC Digital Supervisor
- Driver for ASUS EC
Improvements to existing drivers:
- adt7x10: Convert to use regmap, convert to use with_info API,
use hwmon_notify_event, and other cleanup
- aquacomputer_d5next: Add support for Aquacomputer Farbwerk 360
- asus_wmi_sensors: Add ASUS ROG STRIX B450-F GAMING II
- asus_wmi_ec_sensors: Support T_Sensor on Prime X570-Pro
Deprecate driver (replaced by new driver)
- axi-fan-control: Use hwmon_notify_event
- dell-smm: Clean up CONFIG_I8K, disable fan type support for
Inspiron 3505, various other cleanup
- hwmon core: Report attribute name with udev events,
Add "label" attribute to ABI,
Add support for pwm auto channels attribute
- max6639: Add regulator support
- lm70: Add support for TI TMP125
- lm83: Cleanup, convert to use with_info API
- mlxreg-fan: Use pwm attribute for setting fan speed low limit
- nct6775: Sdd ASUS ROG STRIX Z390/Z490/X570-* / PRIME X570-P,
PRIME B550-PLUS, ASUS Pro B550M-C/PRIME B550M-A,
and support for TSI temperature registers
- occ: Add various new sysfs attributes
- pmbus core: Handle VIN unit off status,
Add regulator supply into macro,
Add get_error_flags support to regulator ops
- pmbus/adm1275: Allow setting sample averaging
- pmbus/lm25066: Add regulator support
- pmbus/xdpe12284: Add support for xdpe11280 and register as regulator
- powr1220: Convert to with_info API,
Add support for Lattice's POWR1014 power manager IC
- sch56xx: Cleanup and minor improvements
- sch5627: Add pwmX_auto_channels_temp support
- tc654: Add thermal_cooling device support
-----BEGIN PGP SIGNATURE-----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=4u33
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Texas Instruments TMP464 and TMP468 driver
- Vicor PLI1209BC Digital Supervisor driver
- ASUS EC driver
Improvements to existing drivers:
- adt7x10:
- Convert to use regmap
- convert to use with_info API
- use hwmon_notify_event
- other cleanup
- aquacomputer_d5next:
- Add support for Aquacomputer Farbwerk 360
- asus_wmi_sensors:
- Add ASUS ROG STRIX B450-F GAMING II
- asus_wmi_ec_sensors:
- Support T_Sensor on Prime X570-Pro
- Deprecate driver (replaced by new driver)
- axi-fan-control:
- Use hwmon_notify_event
- dell-smm:
- Clean up CONFIG_I8K
- disable fan type support for Inspiron 3505
- various other cleanup
- hwmon core:
- Report attribute name with udev events
- Add "label" attribute to ABI,
- Add support for pwm auto channels attribute
- max6639:
- Add regulator support
- lm70:
- Add support for TI TMP125
- lm83:
- Cleanup, convert to use with_info API
- mlxreg-fan:
- Use pwm attribute for setting fan speed low limit
- nct6775:
- Add board ID's for ASUS ROG STRIX Z390/Z490/X570-* / PRIME
X570-P, PRIME B550-PLUS, ASUS Pro B550M-C/PRIME B550M-A
- Add support for TSI temperature registers
- occ:
- Add various new sysfs attributes
- pmbus core:
- Handle VIN unit off status
- Add regulator supply into macro
- Add get_error_flags support to regulator ops
- pmbus/adm1275:
- Allow setting sample averaging
- pmbus/lm25066:
- Add regulator support
- pmbus/xdpe12284:
- Add support for xdpe11280
- register as regulator
- powr1220:
- Convert to with_info API
- Add support for Lattice's POWR1014 power manager IC
- sch56xx:
- Cleanup and minor improvements
- sch5627:
- Add pwmX_auto_channels_temp support
- tc654:
- Add thermal_cooling device support"
* tag 'hwmon-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
hwmon: (dell-smm) Add Inspiron 3505 to fan type blacklist
hwmon: (pmbus) Add Vin unit off handling
hwmon: (scpi-hwmon): Use of_device_get_match_data()
hwmon: (axi-fan-control) Use hwmon_notify_event
hwmon: (vexpress-hwmon) Use of_device_get_match_data()
hwmon: Add driver for Texas Instruments TMP464 and TMP468
dt-bindings: hwmon: add tmp464.yaml
dt-bindings: hwmon: Add sample averaging properties for ADM1275
hwmon: (adm1275) Allow setting sample averaging
hwmon: (xdpe12284) Add regulator support
hwmon: (xdpe12284) Add support for xdpe11280
dt-bindings: trivial-devices: Add xdpe11280
hwmon: (aquacomputer_d5next) Add support for Aquacomputer Farbwerk 360
hwmon: (sch5627) Add pwmX_auto_channels_temp support
hwmon: (core) Add support for pwm auto channels attribute
hwmon: (lm70) Add ti,tmp125 support
dt-bindings: Add ti,tmp125 temperature sensor binding
hwmon: (pmbus/pli1209bc) Add regulator support
hwmon: (pmbus) Add support for pli1209bc
dt-bindings:trivial-devices: Add pli1209bc
...
When the ring is exiting, as part of the shutdown, poll requests are
removed. But io_poll_remove_all() does not remove entries when finding
them, and since completions are done out-of-band, we can find and remove
the same entry multiple times.
We do guard the poll execution by poll ownership, but that does not
exclude us from reissuing a new one once the previous removal ownership
goes away.
This can race with poll execution as well, where we then end up seeing
req->apoll be NULL because a previous task_work requeue finished the
request.
Remove the poll entry when we find it and get ownership of it. This
prevents multiple invocations from finding it.
Fixes: aa43477b04 ("io_uring: poll rework")
Reported-by: Dylan Yudaken <dylany@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=PzC6
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/alloc-cleanups-2022-03-18' of git://git.kernel.dk/linux-block
Pull bio_alloc() cleanups from Jens Axboe:
"Filesystem cleanups to pass the bio op to bio_alloc() instead of
setting it just before bio submission".
* tag 'for-5.18/alloc-cleanups-2022-03-18' of git://git.kernel.dk/linux-block:
f2fs: pass the bio operation to bio_alloc_bioset
f2fs: don't pass a bio to f2fs_target_device
nilfs2: pass the operation to bio_alloc
ext4: pass the operation to bio_alloc
mpage: pass the operation to bio_alloc
-----BEGIN PGP SIGNATURE-----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=993h
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe updates via Christoph:
- add vectored-io support for user-passthrough (Kanchan Joshi)
- add verbose error logging (Alan Adamson)
- support buffered I/O on block devices in nvmet (Chaitanya
Kulkarni)
- central discovery controller support (Martin Belanger)
- fix and extended the globally unique idenfier validation
(Christoph)
- move away from the deprecated IDA APIs (Sagi Grimberg)
- misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin,
Chaitanya Kulkarni)
- add lockdep annotations for in-kernel sockets (Chris Leech)
- use vmalloc for ANA log buffer (Hannes Reinecke)
- kerneldoc fixes (Chaitanya Kulkarni)
- cleanups (Guoqing Jiang, Chaitanya Kulkarni, Christoph)
- warn about shared namespaces without multipathing (Christoph)
- MD updates via Song with a set of cleanups (Christoph, Mariusz, Paul,
Erik, Dirk)
- loop cleanups and queue depth configuration (Chaitanya)
- null_blk cleanups and fixes (Chaitanya)
- Use descriptive init/exit names in virtio_blk (Randy)
- Use bvec_kmap_local() in drivers (Christoph)
- bcache fixes (Mingzhe)
- xen blk-front persistent grant speedups (Juergen)
- rnbd fix and cleanup (Gioh)
- Misc fixes (Christophe, Colin)
* tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block: (76 commits)
virtio_blk: eliminate anonymous module_init & module_exit
nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH
nvme: remove nvme_alloc_request and nvme_alloc_request_qid
nvme: cleanup how disk->disk_name is assigned
nvmet: move the call to nvmet_ns_changed out of nvmet_ns_revalidate
nvmet: use snprintf() with PAGE_SIZE in configfs
nvmet: don't fold lines
nvmet-rdma: fix kernel-doc warning for nvmet_rdma_device_removal
nvmet-fc: fix kernel-doc warning for nvmet_fc_unregister_targetport
nvmet-fc: fix kernel-doc warning for nvmet_fc_register_targetport
nvme-tcp: lockdep: annotate in-kernel sockets
nvme-tcp: don't fold the line
nvme-tcp: don't initialize ret variable
nvme-multipath: call bio_io_error in nvme_ns_head_submit_bio
nvme-multipath: use vmalloc for ANA log buffer
xen/blkfront: speed up purge_persistent_grants()
raid5: initialize the stripe_head embeeded bios as needed
raid5-cache: statically allocate the recovery ra bio
raid5-cache: fully initialize flush_bio when needed
raid5-ppl: fully initialize the bio in ppl_new_iounit
...
Some chips using the split VTU/STU design will not accept VTU entries
who's SID points to an invalid STU entry. Therefore, mark all those
chips with either the mv88e6352_g1_stu_* or mv88e6390_g1_stu_* ops as
appropriate.
Notably, chips for the Opal Plus (6085/6097) era seem to use a
different implementation than those from Agate (6352) and onwards,
even though their external interface is the same. The former happily
accepts VTU entries referencing invalid STU entries, while the latter
does not.
This fixes an issue where the driver would fail to probe switch trees
that contained chips of the Agate/Topaz generation which did not
declare STU support, as loaded VTU entries would be read back as
invalid.
Fixes: 49c98c1dc7 ("net: dsa: mv88e6xxx: Disentangle STU from VTU")
Reported-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20220319110345.555270-1-tobias@waldekranz.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
`cur64`, `start64` and `ts_delta` are int64_t. Change format
specifiers in fprintf from `"%lu"` to `"%" PRId64` to adapt
to 32-bit and 64-bit systems.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Link: https://lore.kernel.org/r/20220319073730.5235-1-guozhengkui@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zzak
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/io_uring-statx-2022-03-18' of git://git.kernel.dk/linux-block
Pull io_uring statx fixes from Jens Axboe:
"On top of the main io_uring branch, this is to ensure that the
filename component of statx is stable after submit.
That requires a few VFS related changes"
* tag 'for-5.18/io_uring-statx-2022-03-18' of git://git.kernel.dk/linux-block:
io-uring: Make statx API stable
-----BEGIN PGP SIGNATURE-----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=OBma
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/io_uring-2022-03-18' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
- Fixes for current file position. Still doesn't have the f_pos_lock
sorted, but it's a step in the right direction (Dylan)
- Tracing updates (Dylan, Stefan)
- Improvements to io-wq locking (Hao)
- Improvements for provided buffers (me, Pavel)
- Support for registered file descriptors (me, Xiaoguang)
- Support for ring messages (me)
- Poll improvements (me)
- Fix for fixed buffers and non-iterator reads/writes (me)
- Support for NAPI on sockets (Olivier)
- Ring quiesce improvements (Usama)
- Misc fixes (Olivier, Pavel)
* tag 'for-5.18/io_uring-2022-03-18' of git://git.kernel.dk/linux-block: (42 commits)
io_uring: terminate manual loop iterator loop correctly for non-vecs
io_uring: don't check unrelated req->open.how in accept request
io_uring: manage provided buffers strictly ordered
io_uring: fold evfd signalling under a slower path
io_uring: thin down io_commit_cqring()
io_uring: shuffle io_eventfd_signal() bits around
io_uring: remove extra barrier for non-sqpoll iopoll
io_uring: fix provided buffer return on failure for kiocb_done()
io_uring: extend provided buf return to fails
io_uring: refactor timeout cancellation cqe posting
io_uring: normilise naming for fill_cqe*
io_uring: cache poll/double-poll state with a request flag
io_uring: cache req->apoll->events in req->cflags
io_uring: move req->poll_refs into previous struct hole
io_uring: make tracing format consistent
io_uring: recycle apoll_poll entries
io_uring: remove duplicated member check for io_msg_ring_prep()
io_uring: allow submissions to continue on error
io_uring: recycle provided buffers if request goes async
io_uring: ensure reads re-import for selected buffers
...
This series improves perf support for RISC-V based system using SBI PMU
and Sscofpmf extensions, by adding a new generic RISC-V perf framework
along with a pair of drivers: one that usese the new
performance-monitoring extensions and one that keeps support for the
existing systems that only have the legacy counters.
Tested-by: Nikita Shubin <n.shubin@yadro.com>
* palmer/riscv-pmu:
MAINTAINERS: Add entry for RISC-V PMU drivers
Documentation: riscv: Remove the old documentation
RISC-V: Add sscofpmf extension support
RISC-V: Add perf platform driver based on SBI PMU extension
RISC-V: Add RISC-V SBI PMU extension definitions
RISC-V: Add a simple platform driver for RISC-V legacy perf
RISC-V: Add a perf core library for pmu drivers
RISC-V: Add CSR encodings for all HPMCOUNTERS
RISC-V: Remove the current perf implementation
In the same way that we check for STU support in the MST state
callback, we should also verify it before trying to change a VLANs
MSTI membership.
Fixes: acaf4d2e36 ("net: dsa: mv88e6xxx: MST Offloading")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simply having a physical STU table in the device doesn't do us any
good if there's no implementation of the relevant ops to access that
table. So ensure that chips that claim STU support can also talk to
the hardware.
This fixes an issue where chips that had a their ->info->max_sid
set (due to their family membership), but no implementation (due to
their chip-specific ops struct) would fail to probe.
Fixes: 49c98c1dc7 ("net: dsa: mv88e6xxx: Disentangle STU from VTU")
Reported-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename the DRRS functiosn to say "(de)activate" rather than
"enable/disable". This let's us differentiate between the
logically enabled vs. actually currently active cases.
v2: Fix kernel doc for intel_drrs_deactivate()
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315132752.11849-10-ville.syrjala@linux.intel.com
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
The existing pmu documentation describes the limitation of perf
infrastructure in RISC-V ISA and limited feature set of perf in RISC-V.
However, SBI PMU extension and sscofpmf extension(ISA extension) allows to
implement most of the required features of perf. Remove the old
documentation which is not accurate anymore.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The sscofpmf extension allows counter overflow and filtering for
programmable counters. Enable the perf driver to handle the overflow
interrupt. The overflow interrupt is a hart local interrupt.
Thus, per cpu overflow interrupts are setup as a child under the root
INTC irq domain.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
RISC-V SBI specification added a PMU extension that allows to configure
start/stop any pmu counter. The RISC-V perf can use most of the generic
perf features except interrupt overflow and event filtering based on
privilege mode which will be added in future.
It also allows to monitor a handful of firmware counters that can provide
insights into firmware activity during a performance analysis.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch adds all the definitions defined by the SBI PMU extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The old RISC-V perf implementation allowed counting of only
cycle/instruction counters using perf. Restore that feature by implementing
a simple platform driver under a separate config to provide backward
compatibility. Any existing software stack will continue to work as it is.
However, it provides an easy way out in future where we can remove the
legacy driver.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Implement a perf core library that can support all the essential perf
features in future. It can also accommodate any type of PMU implementation
in future. Currently, both SBI based perf driver and legacy driver
implemented uses the library. Most of the common perf functionalities
are kept in this core library wile PMU specific driver can implement PMU
specific features. For example, the SBI specific functionality will be
implemented in the SBI specific driver.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Ziyang Xuan says:
====================
net/tls: some optimizations for tls
Do some small optimizations for tls, including jump instructions
optimization, and judgement processes optimization.
====================
Link: https://lore.kernel.org/r/cover.1647658604.git.william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linux kernel can directly read these counters as the HPMCOUNTERS CSRs are
accessible in S-mode.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
It is known that priority setting HW offload when set tls TX/RX offload
by setsockopt(). Check netdevice whether support NETIF_F_HW_TLS_TX or
not at the later stages in the whole tls_set_device_offload() process,
some memory allocations have been done before that. We must release those
memory and return error if we judge the netdevice not support
NETIF_F_HW_TLS_TX. It is redundant.
Move NETIF_F_HW_TLS_TX judgement forward, and move start_marker_record
and offload_ctx memory allocation back slightly. Thus, we can get
simpler exception handling process.
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid using "goto" jump instruction unconditionally when we
can return directly. Remove unnecessary jump instructions in
do_tls_setsockopt_conf().
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current perf implementation in RISC-V is not very useful as it can not
count any events other than cycle/instructions. Moreover, perf record
can not be used or the events can not be started or stopped.
Remove the implementation now for a better platform driver in future
that will implement most of the missing functionality.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
-----BEGIN PGP SIGNATURE-----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=cyDR
-----END PGP SIGNATURE-----
Merge tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld:
"There have been a few important changes to the RNG's crypto, but the
intent for 5.18 has been to shore up the existing design as much as
possible with modern cryptographic functions and proven constructions,
rather than actually changing up anything fundamental to the RNG's
design.
So it's still the same old RNG at its core as before: it still counts
entropy bits, and collects from the various sources with the same
heuristics as before, and so forth. However, the cryptographic
algorithms that transform that entropic data into safe random numbers
have been modernized.
Just as important, if not more, is that the code has been cleaned up
and re-documented. As one of the first drivers in Linux, going back to
1.3.30, its general style and organization was showing its age and
becoming both a maintenance burden and an auditability impediment.
Hopefully this provides a more solid foundation to build on for the
future. I encourage you to open up the file in full, and maybe you'll
remark, "oh, that's what it's doing," and enjoy reading it. That, at
least, is the eventual goal, which this pull begins working toward.
Here's a summary of the various patches in this pull:
- /dev/urandom and /dev/random now do the same thing, per the patch
we discussed on the list. I think this is worth trying out. If it
does appear problematic, I've made sure to keep it standalone and
revertible without any conflicts.
- Fixes and cleanups for numerous integer type problems, locking
issues, and general code quality concerns.
- The input pool's LFSR has been replaced with a cryptographically
secure hash function, which has security and performance benefits
alike, and consequently allows us to count entropy bits linearly.
- The pre-init injection now uses a real hash function too, instead
of an LFSR or vanilla xor.
- The interrupt handler's fast_mix() function now uses one round of
SipHash, rather than the fake crypto that was there before.
- All additions of RDRAND and RDSEED now go through the input pool's
hash function, in part to mitigate ridiculous hypothetical CPU
backdoors, but more so to have a consistent interface for ingesting
entropy that's easy to analyze, making everything happen one way,
instead of a potpourri of different ways.
- The crng now works on per-cpu data, while also being in accordance
with the actual "fast key erasure RNG" design. This allows us to
fix several boot-time race complications associated with the prior
dynamically allocated model, eliminates much locking, and makes our
backtrack protection more robust.
- Batched entropy now erases doled out values so that it's backtrack
resistant.
- Working closely with Sebastian, the interrupt handler no longer
needs to take any locks at all, as we punt the
synchronized/expensive operations to a workqueue. This is
especially nice for PREEMPT_RT, where taking spinlocks in irq
context is problematic. It also makes the handler faster for the
rest of us.
- Also working with Sebastian, we now do the right thing on CPU
hotplug, so that we don't use stale entropy or fail to accumulate
new entropy when CPUs come back online.
- We handle virtual machines that fork / clone / snapshot, using the
"vmgenid" ACPI specification for retrieving a unique new RNG seed,
which we can use to also make WireGuard (and in the future, other
things) safe across VM forks.
- Around boot time, we now try to reseed more often if enough entropy
is available, before settling on the usual 5 minute schedule.
- Last, but certainly not least, the documentation in the file has
been updated considerably"
* tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (60 commits)
random: check for signal and try earlier when generating entropy
random: reseed more often immediately after booting
random: make consistent usage of crng_ready()
random: use SipHash as interrupt entropy accumulator
wireguard: device: clear keys on VM fork
random: provide notifier for VM fork
random: replace custom notifier chain with standard one
random: do not export add_vmfork_randomness() unless needed
virt: vmgenid: notify RNG of VM fork and supply generation ID
ACPI: allow longer device IDs
random: add mechanism for VM forks to reinitialize crng
random: don't let 644 read-only sysctls be written to
random: give sysctl_random_min_urandom_seed a more sensible value
random: block in /dev/urandom
random: do crng pre-init loading in worker rather than irq
random: unify cycles_t and jiffies usage and types
random: cleanup UUID handling
random: only wake up writers after zap if threshold was passed
random: round-robin registers as ulong, not u32
random: clear fast pool, crng, and batches in cpuhp bring up
...
Compiled with clang by adding LLVM=1 both kernel and selftests/bpf
build, I hit the following compilation error:
In file included from /.../tools/testing/selftests/bpf/prog_tests/subskeleton.c:6:
./test_subskeleton_lib.subskel.h:168:6: error: variable 'err' is used uninitialized whenever
'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!s->progs)
^~~~~~~~~
./test_subskeleton_lib.subskel.h:181:11: note: uninitialized use occurs here
errno = -err;
^~~
./test_subskeleton_lib.subskel.h:168:2: note: remove the 'if' if its condition is always false
if (!s->progs)
^~~~~~~~~~~~~~
The compilation error is triggered by the following code
...
int err;
obj = (struct test_subskeleton_lib *)calloc(1, sizeof(*obj));
if (!obj) {
errno = ENOMEM;
goto err;
}
...
err:
test_subskeleton_lib__destroy(obj);
errno = -err;
...
in test_subskeleton_lib__open(). The 'err' is not initialized, yet it
is used in 'errno = -err' later.
The fix is to remove 'errno = -err' since errno has been set properly
in all incoming branches.
Fixes: 00389c58ff ("bpftool: Add support for subskeletons")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220320032009.3106133-1-yhs@fb.com
