In some corner cases, the peer handing an incoming ADD_ADDR option, can
receive a retransmitted ADD_ADDR for the same address before the subflow
creation completes.
We can avoid the above issue by generating and sending the ADD_ADDR echo
before starting the MPJ subflow connection.
This slightly changes the behaviour of the packetdrill tests as the
ADD_ADDR echo packet is sent earlier.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20220317221444.426335-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Got crash when doing pressure test of mptcp:
===========================================================================
dst_release: dst:ffffa06ce6e5c058 refcnt:-1
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle kernel paging request at ffffa06ce6e5c058
PGD 190a01067 P4D 190a01067 PUD 43fffb067 PMD 22e403063 PTE 8000000226e5c063
Oops: 0011 [#1] SMP PTI
CPU: 7 PID: 7823 Comm: kworker/7:0 Kdump: loaded Tainted: G E
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.2.1 04/01/2014
Call Trace:
? skb_release_head_state+0x68/0x100
? skb_release_all+0xe/0x30
? kfree_skb+0x32/0xa0
? mptcp_sendmsg_frag+0x57e/0x750
? __mptcp_retrans+0x21b/0x3c0
? __switch_to_asm+0x35/0x70
? mptcp_worker+0x25e/0x320
? process_one_work+0x1a7/0x360
? worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
? kthread+0x112/0x130
? kthread_flush_work_fn+0x10/0x10
? ret_from_fork+0x35/0x40
===========================================================================
In __mptcp_alloc_tx_skb skb was allocated and skb->tcp_tsorted_anchor will
be initialized, in under memory pressure situation sk_wmem_schedule will
return false and then kfree_skb. In this case skb->_skb_refdst is not null
because_skb_refdst and tcp_tsorted_anchor are stored in the same mem, and
kfree_skb will try to release dst and cause crash.
Fixes: f70cad1085 ("mptcp: stop relying on tcp_tx_skb_cache")
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Yonglong Li <liyonglong@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20220317220953.426024-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add driver for Renesas 9-series PCIe clock generators. This driver
is designed to support 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ series I2C
PCIe clock generators, currently the only tested and supported chip
is 9FGV0241.
The driver is capable of configuring per-chip spread spectrum mode
and output amplitude, as well as per-output slew rate.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220226040723.143705-3-marex@denx.de
[sboyd@kernel.org: Use non-underscore API for fixed factor]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Guillaume Nault says:
====================
ipv4: Handle TOS and scope properly for ICMP redirects and PMTU updates
ICMPv4 PMTU and redirect handlers didn't properly initialise the
struct flowi4 they used for route lookups:
* ECN bits sometimes weren't cleared from ->flowi4_tos.
* The RTO_ONLINK flag wasn't taken into account for ->flowi4_scope.
In some special cases, this resulted in ICMP redirects and PMTU updates
not being taken into account because fib_lookup() couldn't retrieve the
correct route.
====================
Link: https://lore.kernel.org/r/cover.1647519748.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add two tests to pmtu.sh, for verifying that PMTU exceptions get
properly created for routes that don't belong to the main table.
A fib-rule based on the packet's DSCP field is used to jump to the
correct table. ECN shouldn't interfere with this process, so each test
has two components: one that only sets DSCP and one that sets both DSCP
and ECN.
One of the test triggers PMTU exceptions using ICMP Echo Requests, the
other using UDP packets (to test different handlers in the kernel).
A few adjustments are necessary in the rest of the script to allow
policy routing scenarios:
* Add global variable rt_table that allows setup_routing_*() to
add routes to a specific routing table. By default rt_table is set
to "main", so existing tests don't need to be modified.
* Another global variable, policy_mark, is used to define which
dsfield value is used for policy routing. This variable has no
effect on tests that don't use policy routing.
* The UDP version of the test uses socat. So cleanup() now also need
to kill socat PIDs.
* route_get_dst_pmtu_from_exception() and route_get_dst_exception()
now take an optional third argument specifying the dsfield. If
not specified, 0 is used, so existing users don't need to be
modified.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PMTU update and ICMP redirect helper functions initialise their fl4
variable with either __build_flow_key() or build_sk_flow_key(). These
initialisation functions always set ->flowi4_scope with
RT_SCOPE_UNIVERSE and might set the ECN bits of ->flowi4_tos. This is
not a problem when the route lookup is later done via
ip_route_output_key_hash(), which properly clears the ECN bits from
->flowi4_tos and initialises ->flowi4_scope based on the RTO_ONLINK
flag. However, some helpers call fib_lookup() directly, without
sanitising the tos and scope fields, so the route lookup can fail and,
as a result, the ICMP redirect or PMTU update aren't taken into
account.
Fix this by extracting the ->flowi4_tos and ->flowi4_scope sanitisation
code into ip_rt_fix_tos(), then use this function in handlers that call
fib_lookup() directly.
Note 1: We can't sanitise ->flowi4_tos and ->flowi4_scope in a central
place (like __build_flow_key() or flowi4_init_output()), because
ip_route_output_key_hash() expects non-sanitised values. When called
with sanitised values, it can erroneously overwrite RT_SCOPE_LINK with
RT_SCOPE_UNIVERSE in ->flowi4_scope. Therefore we have to be careful to
sanitise the values only for those paths that don't call
ip_route_output_key_hash().
Note 2: The problem is mostly about sanitising ->flowi4_tos. Having
->flowi4_scope initialised with RT_SCOPE_UNIVERSE instead of
RT_SCOPE_LINK probably wasn't really a problem: sockets with the
SOCK_LOCALROUTE flag set (those that'd result in RTO_ONLINK being set)
normally shouldn't receive ICMP redirects or PMTU updates.
Fixes: 4895c771c7 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an API for a fixed factor clk that uses an index for the parent
instead of a string name. This allows us to move drivers away from the
string based method of describing parents and use the DT/firmware based
method instead.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220226040723.143705-2-marex@denx.de
[sboyd@kernel.org: Expose a new API instead of internal function]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There is no function mlx5e_get_sq(), remove the declaration.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Starting from commit
4cab346bcf ("net/mlx5: No command allowed when command interface is not ready"),
no calls to mlx5_cmd_trigger_completions() are external to cmd.c anymore.
Make it a static function.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
After introducing multi-buffer XDP_TX, the MLX5E_XDP_TX_DS_COUNT define
became misleading. It's no longer the DS count of an XDP_TX WQE, this
WQE can be longer because of fragments.
As this define is only used at one place in mlx5e_open_xdpsq(), it's
also not very useful anymore. This commit removes the define and puts
the calculation of ds_count for prefilled single-fragment WQEs inline.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This commit enables passing multi buffer XDP frames to the TX handlers
on XDP_TX. Fragments are DMA synchronized to the device and queued to
the xdpi_fifo for a subsequent unmapping.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The next commit will add more indentation levels to mlx5e_xmit_xdp_buff.
To keep indentation minimal, unindent the else-block of the if-statement
by doing an early return.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
xmit_xdp_frame is extended to support sending fragmented XDP frames. The
next commit will start using this functionality.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When MPWQE is disabled, mlx5e_open_xdpsq() prefills the common fields of
WQEs in the XDP SQ to save time when sending packets.
mlx5e_xmit_xdp_frame() runs on the prefilled fields, however, sending
multi buffer XDP frames would require changing some of these fields on a
per-packet basis. Besides that, mlx5e_xmit_xdp_frame() will be used as a
fallback to send multi buffer XDP frames when MPWQE is enabled (MPWQE
can only handle linear packets).
In order to prepare for XDP multi buffer support, this commit introduces
a mode for mlx5e_xmit_xdp_frame() that fills all the fields itself.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When MPWQE is disabled, mlx5e_open_xdpsq prefills the common fields of
WQEs in the XDP SQ to save time when sending packets. One of such fields
is eseg->inline_hdr.sz, which can be either 0 or MLX5E_XDP_MIN_INLINE,
depending on the inline mode of the SQ.
The inline mode can't change during the lifetime of the SQ, so setting
this field again in mlx5e_xmit_xdp_frame is redundant. Moreover, the
xmit function only sets it to MLX5E_XDP_MIN_INLINE, but not to 0 in the
other case.
This commit removes the redundant assignment in mlx5e_xmit_xdp_frame.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The implementations of xmit_xdp_frame get the xdpi parameter of type
struct mlx5e_xdp_info for the sole purpose of calling
mlx5e_xdpi_fifo_push() on success.
This commit moves this call outside of xmit_xdp_frame, shifting this
responsibility to the caller. It will allow more fine-grained handling
of XDP info for cases when an xdp_frame is fragmented.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use page_pool_set_dma_addr() to store the DMA address of a page inside
struct page, in order to avoid passing struct mlx5e_dma_info to XDP
handlers. Previously, struct mlx5e_dma_info was used to pass both the
DMA address and the page, and it worked well for the single-fragment
case.
When XDP multi buffer is in use, and a fragmented xdp_frame has to be
transmitted, the driver needs to know the DMA addresses of fragments,
however, the array of fragments in struct skb_shared_info doesn't
contain them. In order to pass the DMA addresses, the driver puts them
into struct page itself, which is accessible from the array of fragments
in struct skb_shared_info. The existing XDP handlers are modified to
remove the dependency on struct mlx5e_dma_info.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This commit adds XDP multi buffer support to the RX path in the
non-linear legacy RQ mode. mlx5e_xdp_handle is called from
mlx5e_skb_from_cqe_nonlinear.
XDP_TX action for fragmented XDP frames is not yet supported and
blocked.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The implementation of XDP in mlx5e assumes that the frame size is equal
to the page size. Force this limitation in the non-linear mode for XDP
multi buffer.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
XDP multi buffer implementation in the kernel assumes that all fragments
have the same size. bpf_xdp_frags_increase_tail uses this assumption to
get the size of the last fragment, and __xdp_build_skb_from_frame uses
it to calculate truesize as nr_frags * xdpf->frame_sz.
The current implementation of mlx5e uses fragments of different size in
non-linear legacy RQ. Specifically, the last fragment can be larger than
the others. It's an optimization for packets smaller than MTU.
This commit adapts mlx5e to the kernel limitations and makes it use
fragments of the same size, in order to add support for XDP multi
buffer. The change is applied only if XDP is active, otherwise the old
optimization still applies.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5e_skb_from_cqe_nonlinear creates an xdp_buff first, putting the
first fragment as the linear part, and the rest of fragments as
fragments to struct skb_shared_info in the tailroom. Then it creates an
SKB in place, based on the xdp_buff. The XDP program is not called in
this commit yet.
This commit contains no functional change, except the SKB is built over
the whole frag_stride of the first fragment, instead of the minimal size
required (headroom, data and skb_shared_info).
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Don't just mask off all the PSF GV points when SAGV gets disabled.
This should in fact cause the Pcode to reject the request since
at least one PSF point must remain enabled at all times.
Cc: stable@vger.kernel.org
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 192fbfb767 ("drm/i915: Implement PSF GV point support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-7-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Give the pre-icl SAGV control functions a skl_ prefix instead
of the intel_ prefix to make it a bit more clear that they
are not some kind of universal things that can be called on
any platform. Also make the functions void since we never
use the return value anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-6-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
If the mailbox returns an exceesively large SAGV block time let's just
reject it. This avoids having to worry about overflows when we add the
SAGV block time to the wm0 latency.
We shall put the limit arbitrarily at U16_MAX. >65msec latency
doesn't really make sense to me in any case.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-5-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Instead of leaving the SAGV enable/disable to the first commit
let's try to disable it first thing to see if we can do it or
not (disabling SAGV is a safe thing to at any time). This avoids
running the code in this funny intermediate state where we don't
know if SAGV is available or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
I'd like to see the SAGV block time we got from the mailbox
in the logs regardless of whether other factors prevent the
use of SAGV.
So let's adjust the code to always query the SAGV block time,
log it, and then reset it if SAGV is not actually supported.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
For modern platforms the spec explicitly states that a
SAGV block time of zero means that SAGV is not supported.
Let's extend that to all platforms. Supposedly there should
be no systems where this isn't true, and it'll allow us to:
- use the same code regardless of older vs. newer platform
- wm latencies already treat 0 as disabled, so this fits well
with other related code
- make it a bit more clear when SAGV is used vs. not
- avoid overflows from adding U32_MAX with a u16 wm0 latency value
which could cause us to miscalculate the SAGV watermarks on tgl+
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309164948.10671-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series is a continuation to the SOF IPC abstraction work to support
the new IPC version introduced in the SOF firmware. It makes the top-level
control IO, PCM and PM code IPC-agnostic. Other than the first patch,
the rest are purely for abstraction and include no changes in
functionality.
Currently the reading of the onstack array is confusing since two
out of three members are of different types. Let it be more clear
by explicitly set the array size, so everybody will understand that
parameters are cast to the type of the array.
While at it, add a missed space.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The deprecated i2c ->probe() functionality doesn't work with
OF compatible strings, as it only checks for the i2c device id.
While it's not a problem right now, it would still bring a
better code. Switch to the new way of probing.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Use the module_i2c_driver() macro to make the code smaller
and a bit simpler.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Make use of device property API in this driver so that both OF based
system and ACPI based system can use this driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fix multi-line comment style:
- start sentences with Capital letter
- use non-networking style of the first line
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Easily hit the below list corruption:
==
list_add corruption. prev->next should be next (ffffffffc0ceb090), but
was ffffec604507edc8. (prev=ffffec604507edc8).
WARNING: CPU: 65 PID: 3959 at lib/list_debug.c:26
__list_add_valid+0x53/0x80
CPU: 65 PID: 3959 Comm: fbdev Tainted: G U
RIP: 0010:__list_add_valid+0x53/0x80
Call Trace:
<TASK>
fb_deferred_io_mkwrite+0xea/0x150
do_page_mkwrite+0x57/0xc0
do_wp_page+0x278/0x2f0
__handle_mm_fault+0xdc2/0x1590
handle_mm_fault+0xdd/0x2c0
do_user_addr_fault+0x1d3/0x650
exc_page_fault+0x77/0x180
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x7fd98fc8fad1
==
Figure out the race happens when one process is adding &page->lru into
the pagelist tail in fb_deferred_io_mkwrite(), another process is
re-initializing the same &page->lru in fb_deferred_io_fault(), which is
not protected by the lock.
This fix is to init all the page lists one time during initialization,
it not only fixes the list corruption, but also avoids INIT_LIST_HEAD()
redundantly.
V2: change "int i" to "unsigned int i" (Geert Uytterhoeven)
Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Fixes: 105a940416 ("fbdev/defio: Early-out if page is already enlisted")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318005003.51810-1-chuansheng.liu@intel.com
-----BEGIN PGP SIGNATURE-----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=rhQe
-----END PGP SIGNATURE-----
Merge tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fix from Steve French:
"Small fix for regression in multiuser mounts.
The additional improvements suggested by Ronnie to make the server and
session status handling code easier to read can wait for the 5.18
merge window."
* tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix incorrect session setup check for multiuser mounts
- move vendor specific code out of the core into vendor drivers.
- unify all function and object names in the vendor modules.
- make setup() callback optional to improve readability.
- skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
declaration.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHUIqys8OyG1eHf7fS1VPR6WNFOkFAmInffUACgkQS1VPR6WN
FOn9fwf/SCIvgoScBNeQjW4cGTmh11oO+O8i2umibq0pQDLrNF6Ul7ykY6Fdm4Dc
+Ce7c4Vp0O+DRphIkaK5MtNgRmXMOQbqUKcNAQftFS0wCtJ+QVQzOvkVGS3jQA74
KVEY3Jiup3Q5qknBg0r890ENwRLmcGJaPi5DAO+uHcf6ItTpwjv3z6C2ZUeiH6UK
PMSwZgd86dwwH2eU4G5EoAjA+nqOcVvH0V1F49DFsGZ3kkmUS6nMNnSpb5SykszT
4uq+7+c3E2UOC0TlUkyX/xTv4DoZZDi6qqVEaV14bELL1a0FdltjKyIuWTds1Tei
rwPhEOkqOpSnBVjlUWb7icwef21NWg==
=QFe+
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-5.18' into mtd/next
SPI NOR core changes:
- move vendor specific code out of the core into vendor drivers.
- unify all function and object names in the vendor modules.
- make setup() callback optional to improve readability.
- skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
declaration.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
imx:
- Don't test bus flags in atomic check
mgag200:
- Fix PLL setup on some models
panel:
- Fix bpp settings on Innolux G070Y2-L01
- Fix DRM_PANEL_EDP Kconfig dependencies
-----BEGIN PGP SIGNATURE-----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=dr3Y
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-03-18' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"A few minor changes to finish things off, one mgag200 regression, imx
fix and couple of panel changes.
imx:
- Don't test bus flags in atomic check
mgag200:
- Fix PLL setup on some models
panel:
- Fix bpp settings on Innolux G070Y2-L01
- Fix DRM_PANEL_EDP Kconfig dependencies"
* tag 'drm-fixes-2022-03-18' of git://anongit.freedesktop.org/drm/drm:
drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS
drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings
drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()
drm/mgag200: Fix PLL setup for g200wb and g200ew
Network drivers can call to netif_get_num_default_rss_queues to get the
default number of receive queues to use. Right now, this default number
is min(8, num_online_cpus()).
Instead, as suggested by Jakub, use the number of physical cores divided
by 2 as a way to avoid wasting CPU resources and to avoid using both CPU
threads, but still allowing to scale for high-end processors with many
cores.
As an exception, select 2 queues for processors with 2 cores, because
otherwise it won't take any advantage of RSS despite being SMP capable.
Tested: Processor Intel Xeon E5-2620 (2 sockets, 6 cores/socket, 2
threads/core). NIC Broadcom NetXtreme II BCM57810 (10GBps). Ran some
tests with `perf stat iperf3 -R`, with parallelisms of 1, 8 and 24,
getting the following results:
- Number of queues: 6 (instead of 8)
- Network throughput: not affected
- CPU usage: utilized 0.05-0.12 CPUs more than before (having 24 CPUs
this is only 0.2-0.5% higher)
- Reduced the number of context switches by 7-50%, being more noticeable
when using a higher number of parallel threads.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Link: https://lore.kernel.org/r/20220315091832.13873-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This code checks "index" for an upper bound but it does not check for
negatives. Change the type to unsigned to prevent underflows.
Fixes: 3c3c1f1416 ("RDMA/nldev: Allow optional-counter status configuration through RDMA netlink")
Link: https://lore.kernel.org/r/20220316083948.GC30941@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Merge Intel Hardware Feedback Interface (HFI) thermal driver for
5.18-rc1 and update the intel-speed-select utility to support that
driver.
* thermal-hfi:
tools/power/x86/intel-speed-select: v1.12 release
tools/power/x86/intel-speed-select: HFI support
tools/power/x86/intel-speed-select: OOB daemon mode
thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
thermal: intel: hfi: Notify user space for HFI events
thermal: netlink: Add a new event to notify CPU capabilities change
thermal: intel: hfi: Enable notification interrupt
thermal: intel: hfi: Handle CPU hotplug events
thermal: intel: hfi: Minimally initialize the Hardware Feedback Interface
x86/cpu: Add definitions for the Intel Hardware Feedback Interface
x86/Documentation: Describe the Intel Hardware Feedback Interface
Merge powerclamp thermal driver changes, int340x thermal driver changes
and thermal documentation changes for 5.18-rc1:
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel interface
documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy Dunlap).
* thermal-powerclamp:
thermal: intel_powerclamp: don't use bitmap_weight() in end_power_clamp()
* thermal-int340x:
thermal: int340x: Update OS policy capability handshake
thermal: int340x: Increase bitmap size
thermal: Replace acpi_bus_get_device()
thermal: int340x: Check for NULL after calling kmemdup()
* thermal-docs:
Documentation: thermal: DPTF Documentation
thermal: fix Documentation bullet list warning
Merge power management utilities changes for 5.18-rc1:
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui).
* pm-tools:
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
turbostat: fix PC6 displaying on some systems
cpupower: Add "perf" option to print AMD P-State information
cpupower: Add function to print AMD P-State performance capabilities
cpupower: Move print_speed function into misc helper
cpupower: Enable boost state support for AMD P-State module
cpupower: Add AMD P-State sysfs definition and access helper
cpupower: Introduce ACPI CPPC library
cpupower: Add the function to get the sysfs value from specific table
cpupower: Initial AMD P-State capability
cpupower: Add the function to check AMD P-State enabled
cpupower: Add AMD P-State capability flag
tools/power/cpupower/{ToDo => TODO}: Rename the todo file
tools: cpupower: fix typo in cpupower-idle-set(1) manpage
The fix for not advancing the iterator if we're using fixed buffers is
broken in that it can hit a condition where we don't terminate the loop.
This results in io-wq looping forever, asking to read (or write) 0 bytes
for every subsequent loop.
Reported-by: Joel Jaeschke <joel.jaeschke@gmail.com>
Link: https://github.com/axboe/liburing/issues/549
Fixes: 16c8d2df7e ("io_uring: ensure symmetry in handling iter types in loop_rw_iter()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge Dynamic Thermal Power Management (DTPM) changes for 5.18-rc1:
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
* powercap:
powercap: DTPM: Fix spelling mistake "initialze" -> "initialize"
powercap: DTPM: dtpm_node_callback[] can be static
dtpm/soc/rk3399: Add the ability to unload the module
powercap/dtpm_cpu: Add exit function
powercap/dtpm: Move the 'root' reset place
powercap/dtpm: Destroy hierarchy function
powercap/dtpm: Fixup kfree for virtual node
powercap/dtpm_cpu: Reset per_cpu variable in the release function
powercap/dtpm: Change locking scheme
rockchip/soc/drivers: Add DTPM description for rk3399
powercap/drivers/dtpm: Add dtpm devfreq with energy model support
powercap/drivers/dtpm: Add CPU DT initialization support
powercap/drivers/dtpm: Add hierarchy creation
powercap/drivers/dtpm: Convert the init table section to a simple array
