The rproc_da_to_va() API is an exported function, so move its
declaration from the remoteproc local remoteproc_internal.h
to the public remoteproc.h file.
This will allow drivers outside of the remoteproc folder to be
able to use this API.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
[adjusted line numbers to apply]
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308172515.29556-1-dfustini@baylibre.com
qcom_smd's only child, smd-rpm uses arch_initcall and both have to be up
before almost anything else to ensure the MSM SoCs will work fine and
nothing will have to resort to probe defering, as this is the main pillar
of all things DVFS on these machines. Promote it to arch_initcall to avoid
such issues.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211230023253.1123142-1-konrad.dybcio@somainline.org
The example includes a board-specific compatible property, this is wrong
as the example should be board agnostic and should represent the particular
binding. Also, the file includes two similar examples but with a different
compatible. So, drop the entire second example
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210920123152.32751-1-sinthu.raja@ti.com
Switch the DT validation to use DTB files directly instead of a DTS to
YAML conversion.
The original motivation for supporting validation on DTB files was to
enable running validation on a running system (e.g. 'dt-validate
/sys/firmware/fdt') or other cases where the original source DTS is not
available.
The YAML format was not without issues. Using DTBs with the schema type
information solves some of those problems. The YAML format relies on the
DTS source level information including bracketing of properties, size
directives, and phandle tags all of which are lost in a DTB file. While
standardizing the bracketing is a good thing, it does cause a lot of
extra warnings and churn to fix them.
Another issue has been signed types are not validated correctly as sign
information is not propagated to YAML. Using the schema type information
allows for proper handling of signed types. YAML also can't represent
the full range of 64-bit integers as numbers are stored as floats by
most/all parsers.
The DTB validation works by decoding property values using the type
information in the schemas themselves. The main corner case this does
not work for is matrix types where neither dimension is fixed. For
now, checking the dimensions in these cases are skipped.
Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20220310160513.1708182-3-robh@kernel.org
Add ftrace_boot_snapshot kernel parameter that will take a snapshot at the
end of boot up just before switching over to user space (it happens during
the kernel freeing of init memory).
This is useful when there's interesting data that can be collected from
kernel start up, but gets overridden by user space start up code. With
this option, the ring buffer content from the boot up traces gets saved in
the snapshot at the end of boot up. This trace can be read from:
/sys/kernel/tracing/snapshot
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The macro TRACE_DEFINE_ENUM is used to convert enums in the kernel to
their actual value when they are exported to user space via the trace
event format file.
Currently only the enums in the "print fmt" (TP_printk in the TRACE_EVENT
macro) have the enums converted. But the enums can be used to denote array
size:
field:unsigned int fc_ineligible_rc[EXT4_FC_REASON_MAX]; offset:12; size:36; signed:0;
The EXT4_FC_REASON_MAX has no meaning to userspace but it needs to know
that information to know how to parse the array.
Have the array indexes also be parsed as well.
Link: https://lore.kernel.org/all/cover.1646922487.git.riteshh@linux.ibm.com/
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
0-day reported the strncpy error below:
../kernel/trace/trace_events_synth.c: In function 'last_cmd_set':
../kernel/trace/trace_events_synth.c:65:9: warning: 'strncpy' specified bound depends on the length o\
f the source argument [-Wstringop-truncation]
65 | strncpy(last_cmd, str, strlen(str) + 1);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../kernel/trace/trace_events_synth.c:65:32: note: length computed here
65 | strncpy(last_cmd, str, strlen(str) + 1);
| ^~~~~~~~~~~
There's no reason to use strncpy here, in fact there's no reason to do
anything but a simple kstrdup() (note we don't even need to check for
failure since last_cmod is expected to be either the last cmd string
or NULL, and the containing function is a void return).
Link: https://lkml.kernel.org/r/77deca8cbfd226981b3f1eab203967381e9b5bd9.camel@kernel.org
Fixes: 27c888da98 ("tracing: Remove size restriction on synthetic event cmd error logging")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Find user_events always while under the event_mutex and before leaving
the lock, add a ref count to the user_event. This ensures that all paths
under the event_mutex that check the ref counts will be synchronized.
The ioctl add/delete paths are protected by the reg_mutex. However,
dyn_event is only protected by the event_mutex. The dyn_event delete
path cannot acquire reg_mutex, since that could cause a deadlock between
the ioctl delete case acquiring event_mutex after acquiring the reg_mutex.
Link: https://lkml.kernel.org/r/20220310001141.1660-1-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
To make it really easy to add custom events from modules, add a
TRACE_CUSTOM_EVENT() macro that acts just like the TRACE_EVENT() macro,
but creates a custom event to an already existing tracepoint.
The trace_custom_sched.[ch] has been updated to use this new macro to show
how simple it is.
Link: https://lkml.kernel.org/r/20220303220625.738622494@goodmis.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In an effort to add custom event macros that can be used to create your
own custom events based on existing tracepoints, move the defines of the
special macros used in TRACE_EVENT() into their own files such that they
can be reused for TRACE_CUSTOM_EVENT().
Link: https://lkml.kernel.org/r/20220303220625.553406495@goodmis.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add sample code to show how to create custom trace events in the tracefs
directory that can be enabled and modified like any event in tracefs
(including triggers, histograms, synthetic events and event probes).
The example is creating a custom sched_switch and a sched_waking to limit
what is recorded:
If the custom sched switch only records the prev_prio, next_prio and
next_pid, it can bring the size from 64 bytes per event, down to just 16
bytes!
If sched_waking only records the prio and pid of the woken event, it will
bring the size down from 36 bytes to 12 bytes per event.
This will allow for a much smaller footprint into the ring buffer and keep
more events from dropping.
Link: https://lkml.kernel.org/r/20220303220625.369226746@goodmis.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add support for creating filters for GTP-U and GTP-C in switchdev mode. Add
support for parsing GTP-specific options (QFI and PDU type) and TEID.
By default, a filter for GTP-U will be added. To add a filter for GTP-C,
specify enc_dst_port = 2123, e.g.:
tc filter add dev $GTP0 ingress prio 1 flower enc_key_id 1337 \
enc_dst_port 2123 action mirred egress redirect dev $VF1_PR
Note: GTP-U with outer IPv6 offload is not supported yet.
Note: GTP-U with no payload offload is not supported yet.
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Checking only protocol ids while searching for correct FVs can lead to a
situation, when incorrect FV will be added to the list. Incorrect means
that FV has correct protocol id but incorrect offset.
Call ice_get_sw_fv_list with ice_prot_lkup_ext struct which contains all
protocol ids with offsets.
With this modification allocating and collecting protocol ids list is
not longer needed.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add a function that checks if a net device type is GTP.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Options are as follows: PDU_TYPE:QFI and they refernce to
the fields from the PDU Session Protocol. PDU Session data
is conveyed in GTP-U Extension Header.
GTP-U Extension Header is described in 3GPP TS 29.281.
PDU Session Protocol is described in 3GPP TS 38.415.
PDU_TYPE - indicates the type of the PDU Session Information (4 bits)
QFI - QoS Flow Identifier (6 bits)
# ip link add gtp_dev type gtp role sgsn
# tc qdisc add dev gtp_dev ingress
# tc filter add dev gtp_dev protocol ip parent ffff: \
flower \
enc_key_id 11 \
gtp_opts 1:8/ff:ff \
action mirred egress redirect dev eth0
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Adding GTP device through ip link creates the situation where
GTP instance is not able to send GTP echo requests.
Echo requests are used to check if GTP peer is still alive.
With this patch, gtp_genl_ops are extended by new cmd (GTP_CMD_ECHOREQ)
which allows to send echo request in the given version of GTP
protocol (v0 or v1), from the given ms address to he given
peer. TID is not inclued because in all path management
messages it should be equal to 0.
When GTP echo response is detected, multicast message is
send to everyone in the gtp_genl_family. Message contains
GTP version, ms address and peer address.
Suggested-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Adding GTP device through ip link creates the situation where
there is no userspace daemon which would handle GTP messages
(Echo Request for example). GTP-U instance which would not respond
to echo requests would violate GTP specification.
When GTP packet arrives with GTP_ECHO_REQ message type,
GTP_ECHO_RSP is send to the sender. GTP_ECHO_RSP message
should contain information element with GTPIE_RECOVERY tag and
restart counter value. For GTPv1 restart counter is not used
and should be equal to 0, for GTPv0 restart counter contains
information provided from userspace(IFLA_GTP_RESTART_COUNT).
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Suggested-by: Harald Welte <laforge@gnumonks.org>
Reviewed-by: Harald Welte <laforge@gnumonks.org>
Tested-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, when the user wants to create GTP device, he has to
provide file handles to the sockets created in userspace (IFLA_GTP_FD0,
IFLA_GTP_FD1). This behaviour is not ideal, considering the option of
adding support for GTP device creation through ip link. Ip link
application is not a good place to create such sockets.
This patch allows to create GTP device without providing
IFLA_GTP_FD0 and IFLA_GTP_FD1 arguments. If the user sets
IFLA_GTP_CREATE_SOCKETS attribute, then GTP module takes care
of creating UDP sockets by itself. Sockets are created with the
commonly known UDP ports used for GTP protocol (GTP0_PORT and
GTP1U_PORT). In this case we don't have to provide encap_destroy
because no extra deinitialization is needed, everything is covered
by udp_tunnel_sock_release.
Note: GTP instance created with only this change applied, does
not handle GTP Echo Requests. This is implemented in the following
patch.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Compared to SKL and KBL, more recent cAVS platforms are meant to re-use
one of HDAudio streams during boot procedure causing CLDMA to become
obsolete. Once transferred, given stream is returned to pool available
for audio streaming.
Module loading handler is stub as library and module code became
inseparable in later firmware generations.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-18-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With CLDMA transfer implemented, make use of it to shape firmware,
library and module loading routines for SKL and KBL platforms.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-17-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SKL and KBL rely on a dedicated HDAudio DMA stream for code loading and
authentication. The implementation of this specific mechanism for
SKL-based platforms re-uses HDAudio DMA (streaming) functions found in
HDA library to avoid duplication of functionality.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-16-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Code loading is a complex procedure and requires combined effort of DMA
and IPCs. With IPCs already in place, lay out ground for specific DMA
transfer operations.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wrap elementary DSP-core operations and resource control into more
complex handlers. This is done to reduce the number of invocations of
wrapped operations throughout the driver as order of operations matters -
most flows involve register manipulation and IPCs combined.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare structures and constants for all modules being part of basefw
binary. These are used in streaming operations to communicate the needs
of software to firmware side.
While adding module types, append handler for SET_SINK_FORMAT runtime
for COPIER module which allows for configuration of output pin other
than the default one (0).
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-13-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With basefw runtime parameter handlers added, implement utility
functions to ease pipelines and modules allocation. IDA is enlisted to
help with that.
As firmware is modular and multiple binaries can be loaded on-demand
depending on the streaming scenario, custom firmware caching mechanism
is added.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each module may expose a range of runtime parameters. For basefw,
implement handlers for: FIRMWARE_CONFIG, HARDWARE_CONFIG and
MODULES_INFO. These are used by driver to dynamically allocate resources
in respect to platform details, reducing number of hardcodes and code
duplications that would otherwise be needed to be defined within the
driver code.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ROM requests are messages initiated by Host to alter firmware early boot
process. They specify whether the next boot should be a fresh start or if
IMR can be used to speed things up.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio DSP supports low power states i.e.: transitions between D0 and D3
and D0-substates in form of D0i0 and D0i3. That process is a combination
of core and IPC operations. Here, Dx and D0ix IPC handlers are added.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware modules implement processing algorithms. Their lifecycle,
similarly to pipelines is being controlled by IPCs: initialization,
deletion and (un)binding.
Modules can be configured at runtime - runtime parameters. This is done
with help of LARGE_CONFIG IPCs: getter and setter.
Due to firmware limitations, LARGE_CONFIG_GET handler implementation
does not support retrieving payload with size larger than IPC inbox
window size.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pipeline represents a scheduling entity. Their existence as well as
their state machine is controlled through CREATE_PIPELINE,
DELETE_PIPELINE and SET_PIPELINE_STATE IPCs.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before firmware and its modules can be used, they have to be loaded.
Code loading process is complex and is a combination of DMA and IPC
operations. Here, IPC part is being added and accounts for CLDMA and HDA
mechanisms both.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Implement the IPC between Intel audio firmware and kernel driver. The
IPC allows transmission of requests, handling of responses as well as
unsolicited (i.e. firmware-generated) notifications.
A subscription mechanism is added to enable different parts of the
driver to register for specific notifications.
The part of the DSP boot process that involves sending ROM message
requires an extra step - must be followed by unstall operation of
MAIN_CORE. All other types of messages do not require such specific
handling, so separate set of functions is provided for sending these.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Declare base structures and core DSP operations for the avs solution.
The base structures describe PCI HDAudio bus device and platform-type
differentiations. First set of operations added controls the lifecycle
of any Audio DSP core: (un)powering, (un)resetting and (un)stalling.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To allow for more flexibility i.e. populating component DAIs dynamically
during its initialization, without being limited to topology loading
procedure, expose snd_soc_register(), snd_soc_dapm_new_dai_widgets() and
snd_soc_dapm_free_widget() functions.
Allows users to first check available resources e.g. number of PCMs
supported by HDAudio codec before allocating the number of DAPM
widgets needed. This prevents superfluous objects from being created or
allows driver to adjust to situation when resources are limited.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220311153544.136854-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDAudio drivers make heavy use of I/O operations. Declare a range of
update, read and write helpers similar to those available for HDAudio
legacy driver. These macros are used by AVS driver to improve code
readability.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220311153544.136854-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We shouldn't really be keeping track of how many SFC_DONE registers
our platforms can have, but rather how many SFC hardware units there can
be (each SFC unit will have one corresponding SFC_DONE register). So
drop the stray GEN12_SFC_DONE_MAX definition we had in the register
definition file and replace it with an I915_MAX_SFC that follows the
pattern we use for other hardware units. Note that our hardware has a
2:1:1 ratio of VD:VE:SFC, and as far as we know that pattern should
carry forward to future platforms, so we'll define it as #VCS/2.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311062835.163744-1-matthew.d.roper@intel.com
On a HP 288 Pro G8, the front mic could not be detected.In order to
get it working, the pin configuration needs to be set correctly, and
the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.
Signed-off-by: huangwenhui <huangwenhuia@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220311093836.20754-1-huangwenhuia@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These are the interconnect changes for the 5.18-rc1 merge window
consisting of minor framework and driver updates.
Core changes:
- Added stubs for the bulk API to expand compile testing coverage.
Driver changes:
- imx: Implemented get_bw() function to get initial avg/peak bandwidth.
- msm8939: Fix ioremap collision for snoc-mm.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/3jk
-----END PGP SIGNATURE-----
Merge tag 'icc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 5.18
These are the interconnect changes for the 5.18-rc1 merge window
consisting of minor framework and driver updates.
Core changes:
- Added stubs for the bulk API to expand compile testing coverage.
Driver changes:
- imx: Implemented get_bw() function to get initial avg/peak bandwidth.
- msm8939: Fix ioremap collision for snoc-mm.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: Add stubs for the bulk API
interconnect: qcom: msm8939: Remove snoc_mm specific regmap
dt-bindings: interconnect: Convert snoc-mm to a sub-node of snoc
interconnect: imx: Add imx_icc_get_bw function to set initial avg and peak
The Allwinner F1C100 series contains two MMC controller blocks. From
comparing the data sheets, they seem to be compatible with the one used
in the Allwinner A20: the register layout is the same, and they use the
same separate sample and output clocks design.
The only difference is the missing reset line in the A20 version, but
both the binding and the Linux driver make this optional, so it's still
a fit.
Add the new SoC specific name and require it to be paired with the A20
fallback name, as this is all the driver needs to care about.
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220307143421.1106209-8-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This includes following Thunderbolt/USB4 changes for the v5.18 merge
window:
* Improvements for Intel Alpine and Titan Ridge support
* Replace acpi_bus_get_device() with acpi_fetch_acpi_dev()
* Improvements around DROM handling on AMD hardware
* A couple of cleanups.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----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=eAtZ
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next
Mika writes:
thunderbolt: Changes for v5.18 merge window
This includes following Thunderbolt/USB4 changes for the v5.18 merge
window:
* Improvements for Intel Alpine and Titan Ridge support
* Replace acpi_bus_get_device() with acpi_fetch_acpi_dev()
* Improvements around DROM handling on AMD hardware
* A couple of cleanups.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Rename EEPROM handling bits to match USB4 spec
thunderbolt: Clarify register definitions for `tb_cap_plug_events`
thunderbolt: Do not make DROM read success compulsory
thunderbolt: Do not resume routers if UID is not set
thunderbolt: Retry DROM reads for more failure scenarios
thunderbolt: Replace acpi_bus_get_device()
thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devices
thunderbolt: Add missing device ID to tb_switch_is_alpine_ridge()
thunderbolt: Disable LTTPR on Intel Titan Ridge
thunderbolt: Remove useless DMA-32 fallback configuration
In preparation for supporting validation of DTB files, the full
processed schema will always be needed in order to extract type
information from it. Therefore, the processed schema containing only
what DT_SCHEMA_FILES specifies won't work. Instead, dt-validate has
gained an option, -l or --limit, to specify which schema(s) to use for
validation.
As the command line option is new, we the minimum dtschema version must be
updated.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220310160513.1708182-2-robh@kernel.org
Update lock usage of lock_manager_operations' functions to reflect
the changes in commit 6109c85037 ("locks: add a dedicated spinlock
to protect i_flctx lists").
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
These have been incorrect since the function was introduced.
A proper kerneldoc comment is added since this function, though
static, is part of an external interface.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The common practice is to name function instances the same as the
method names, but with a uniquifying prefix. Commit aef9583b23
("NFSD: Get reference of lockowner when coping file_lock") missed
this -- the new function names should both have been of the form
"nfsd4_lm_*".
Before more lock manager operations are added in NFSD, rename these
two functions for consistency.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Eventually support for NFSv2 in the Linux NFS server is to be
deprecated and then removed.
However, NFSv2 is the "always supported" version that is available
as soon as CONFIG_NFSD is set. Before NFSv2 support can be removed,
we need to choose a different "always supported" version.
This patch removes CONFIG_NFSD_V3 so that NFSv3 is always supported,
as NFSv2 is today. When NFSv2 support is removed, NFSv3 will become
the only "always supported" NFS version.
The defconfigs still need to be updated to remove CONFIG_NFSD_V3=y.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The top level QEMU virt machine compatible, linux,dummy-virt, has been
in use for a long time, but never documented. Add a schema for it.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220310021224.599398-1-robh@kernel.org
Convert the QEMU fw-cfg binding to DT schema format. As this binding is
also used on Risc-V now, drop any architecture references and move to a
common location. The fw-cfg interface has also gained some DMA support
which is coherent, so add the missing 'dma-coherent'.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Link: https://lore.kernel.org/r/20220310013552.549590-1-robh@kernel.org
Displaying "PREEMPT" on kernel headers when CONFIG_PREEMPT_DYNAMIC=y
can be misleading for anybody involved in remote debugging because it
is then not guaranteed that there is an actual preemption behaviour. It
depends on default Kconfig or boot defined choices.
Therefore, tell about PREEMPT_DYNAMIC on static kernel headers and leave
the search for the actual preemption behaviour to browsing dmesg.
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220217111240.GA742892@lothringen
