Documentation/hwmon/sy7636a-hwmon.rst:4: WARNING: Title underline too short.
Kernel driver sy7636a-hwmon
=========================
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/all/YgTRu7iLgJMymeT5@google.com/
When the match tables were split for I2C and SPI a static should have
been added since the tables are no longer exported.
Fixes: 3f65555c41 ("mfd: arizona: Split of_match table into I2C and SPI versions")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220104165435.26782-1-ckeepax@opensource.cirrus.com
The config DBX500_PRCMU_QOS_POWER was never introduced in the kernel
repository. So, the ifdef in ./include/linux/mfd/dbx500-prcmu.h was never
effective.
Remove these dead function prototypes.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211227064839.21405-1-lukas.bulwahn@gmail.com
For the CRC PMIC we end up with multiple IRQ domains with the same fwnode.
One for the irqchip which demultiplexes the actual PMIC interrupt into
interrupts for the various cells (known as the level 1 interrupts);
And 2 more for the irqchips which are part of the crystal_cove_gpio
and crystal_cove_charger cells.
This leads to the following error being printed when
CONFIG_GENERIC_IRQ_DEBUGFS is enabled:
debugfs: File '\_SB.I2C7.PMIC' in directory 'domains' already present!
Set the bus token of the main IRQ domain to DOMAIN_BUS_NEXUS to avoid
this error, this also allows irq_find_matching_fwspec() to find the
right domain if necessary.
Note all 3 domain registering drivers need to set the IRQ domain bus token.
This is necessary because the IRQ domain code defaults to creating
the debugfs dir with just the fwnode name and then renames it when
the bus token is set. So each one starts with the same default name and
all 3 must be given a different name to avoid problems when one of the
other drivers loads and starts with the same default name.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211225115509.94891-4-hdegoede@redhat.com
The Crystal Cove PMIC has a pin which can be used to connect the IRQ of
an external charger IC. On some boards this is used and we need to have
a cell for this, with a driver which creates its own irqchip with
a single IRQ for the charger driver to consume.
The charger driver cannot directly consume the IRQ from the MFD level
irqchip because the PMIC has 2 levels of interrupts and the second
level interrupt status register, which is handled by the cell drivers,
needs to have the IRQ acked to avoid an IRQ storm.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211225115509.94891-3-hdegoede@redhat.com
The cells for the Crystal Cove PMIC are already mostly sorted by
function / IRQ order. Move the ADC cell so that they are fully sorted.
Also move some of the resource definitions so that their order matches
the (new) order of the cells.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211225115509.94891-2-hdegoede@redhat.com
In case of DT-configured systems it may be hard to identify the PHY
interrupt in the /proc/interrupts output. Therefore add the name to
the id to make clearer that it's about a device on a muxed mdio bus.
In my case:
Now: mdio_mux-0.e40908ff:08
Before: 0.e40908ff:08
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/00b4bb1e-98f9-b4e7-5549-e095a4701f66@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Focusrite Scarlett Gen 2/3 interfaces with internal mixers have a
"standalone" mode. When the interface is not connected to a USB host
and standalone mode is enabled, the interface will pass audio as
previously configured. This patch adds an ALSA control to allow
enabling/disabling that mode.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/cd88871c5e77abd5c23a4758a1f2ec9fd427fd69.1646578164.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_config_items[] contains the parameters for the configuration
items. The driver previously had two sets of configurations items; one
for devices with no mixer, and one for devices with a mixer. This
patch splits the latter into two (one set for Gen 2 devices and one
set for Gen 3 devices) in preparation for a new item (standalone)
which is present in both but with a different offset.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://lore.kernel.org/r/20969f9ea500684e978c87067fbdc7e73de1f6ed.1646578164.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the following coccicheck warning:
./drivers/gpu/drm/omapdrm/omap_overlay.c:89:22-25: ERROR: r_ovl is NULL
but dereferenced.
Here should be ovl->idx rather than r_ovl->idx.
Fixes: e02b5cc9e8 ("drm/omap: Add a 'right overlay' to plane state")
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220307095612.409090-1-wanjiabing@vivo.com
Use list_first_entry()/list_last_entry() instead of open coded variants.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Compiler is not happy:
warning: symbol 'gpio_sim_hog_config_item_ops' was not declared. Should it be static?
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Even if SPI_NOR_NO_ERASE was set, one could still send erase opcodes
to the flash. It is not recommended to send unsupported opcodes to
flashes. Fix the logic and do not set mtd->_erase when SPI_NOR_NO_ERASE
is specified. With this users will not be able to issue erase opcodes to
flashes and instead they will recive an -ENOTSUPP error.
Fixes: b199489d37 ("mtd: spi-nor: add the framework for SPI NOR")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220228163334.277730-1-tudor.ambarus@microchip.com
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worse scenario, could lead to heap overflows.
Also, address the following sparse warning:
drivers/char/tpm/xen-tpmfront.c:131:16: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/160
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The X.509 parser always sets cert->sig->pkey_algo and
cert->sig->hash_algo on success, since x509_note_sig_algo() is a
mandatory action in the X.509 ASN.1 grammar, and it returns an error if
the signature's algorithm is unknown. Thus, remove the dead code which
handled these fields being NULL.
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The X.509 parser always sets cert->pub->pkey_algo on success, since
x509_extract_key_data() is a mandatory action in the X.509 ASN.1
grammar, and it returns an error if the algorithm is unknown. Thus,
remove the dead code which handled this field being NULL. This results
in the ->unsupported_key flag never being set, so remove that too.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Remove unused fields from struct x509_parse_context.
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
An X.509 certificate has two, potentially different public key
algorithms: the one used by the certificate's key, and the one that was
used to sign the certificate. Some of the naming made it unclear which
algorithm was meant. Rename things appropriately:
- x509_note_pkey_algo() => x509_note_sig_algo()
- algo_oid => sig_algo
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In many cases, keyctl_pkey_params_get_2() is validating the user buffer
lengths against the wrong algorithm properties. Fix it to check against
the correct properties.
Probably this wasn't noticed before because for all asymmetric keys of
the "public_key" subtype, max_data_size == max_sig_size == max_enc_size
== max_dec_size. However, this isn't necessarily true for the
"asym_tpm" subtype (it should be, but it's not strictly validated). Of
course, future key types could have different values as well.
Fixes: 00d60fd3b9 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add a test for /dev/tpmrm0 in async mode that checks if
the code handles invalid handles correctly.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <linux-integrity@vger.kernel.org>
Cc: <linux-kselftest@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Tested-by: Jarkko Sakkinen<jarkko@kernel.org>
Signed-off-by: Tadeusz Struk <tstruk@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
When an invalid (non existing) handle is used in a TPM command,
that uses the resource manager interface (/dev/tpmrm0) the resource
manager tries to load it from its internal cache, but fails and
the tpm_dev_transmit returns an -EINVAL error to the caller.
The existing async handler doesn't handle these error cases
currently and the condition in the poll handler never returns
mask with EPOLLIN set.
The result is that the poll call blocks and the application gets stuck
until the user_read_timer wakes it up after 120 sec.
Change the tpm_dev_async_work function to handle error conditions
returned from tpm_dev_transmit they are also reflected in the poll mask
and a correct error code could passed back to the caller.
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: <linux-integrity@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Fixes: 9e1b74a63f ("tpm: add support for nonblocking operation")
Tested-by: Jarkko Sakkinen<jarkko@kernel.org>
Signed-off-by: Tadeusz Struk <tstruk@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Determine an available PCR bank to be used by a test case by querying the
capability TPM2_GET_CAP. The TPM2 returns TPML_PCR_SELECTIONS that
contains an array of TPMS_PCR_SELECTIONs indicating available PCR banks
and the bitmasks that show which PCRs are enabled in each bank. Collect
the data in a dictionary. From the dictionary determine the PCR bank that
has the PCRs enabled that the test needs. This avoids test failures with
TPM2's that either to not have a SHA-1 bank or whose SHA-1 bank is
disabled.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Variable etype is being assigned a value that is never read. The
variable and assignment are redundant and can be removed.
Cleans up clang scan build warning:
fs/udf/super.c:2485:10: warning: Although the value stored to 'etype'
is used in the enclosing expression, the value is never actually read
from 'etype' [deadcode.DeadStores]
Link: https://lore.kernel.org/r/20220307152149.139045-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The current implementation of the async flip wm0/ddb optimization
does not work at all. The biggest problem is that we skip the
whole intel_pipe_update_{start,end}() dance and thus never actually
complete the commit that is trying to do the wm/ddb change.
To fix this we need to move the do_async_flip flag to the crtc
state since we handle commits per-pipe, not per-plane.
Also since all planes can now be included in the first/last
"async flip" (which gets converted to a sync flip to do the
wm/ddb mangling) we need to be more careful when checking if
the plane state is async flip comptatible. Only planes doing
the async flip should be checked and other planes are perfectly
fine not adhereing to any async flip related limitations.
However for subsequent commits which are actually going do the
async flip in hardware we want to make sure no other planes
are in the state. That should never happen assuming we did our
job correctly, so we'll toss in a WARN to make sure we catch
any bugs here.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be4 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 2e08437160)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since the async flip state check is done very late and
thus it can see potentially all the planes in the state
(due to the wm/ddb optimization) we need to move the
"can the requested plane do async flips at all?" check
much earlier. For this purpose we introduce
intel_async_flip_check_uapi() that gets called early during
the atomic check.
And for good measure we'll throw in a couple of basic checks:
- is the crtc active?
- was a modeset flagged?
- is+was the plane enabled?
Though atm all of those should be guaranteed by the fact
that the async flip can only be requested through the legacy
page flip ioctl.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be4 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b0b2bed2a1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
data_rate==0 no longer means a plane is disabled, it could
also mean we want to use the minimum ddb allocation for it.
Hence we can't bail out early during ddb allocation or
else we'll simply forget to allocate any ddb for such planes.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 6a4d8cc6bb ("drm/i915: Don't allocate extra ddb during async flip for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 6475e10682)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
bigjoiner_pipes==0 leads bigjoiner_master_pipe() to
do BIT(ffs(0)-1) which is undefined behaviour. The code should
actually still work fine since the only place we provoke
that is intel_crtc_bigjoiner_slave_pipes() and it'll bitwise
AND the result with 0, so doesn't really matter what we get
out of bigjoiner_master_pipe(). But best not provoke undefined
behaviour anyway.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: a6e7a006f5 ("drm/i915: Change bigjoiner state tracking to use the pipe bitmask")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
(cherry picked from commit cccc71b552)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Dynamic linking when compiling on the host can cause issues when the
libc version does not match the one in the VM image. Update the
docs to explain how to do this.
Before:
./vmtest.sh -- ./test_progs -t test_ima
./test_progs: /usr/lib/libc.so.6: version `GLIBC_2.33' not found (required by ./test_progs)
After:
LDLIBS=-static ./vmtest.sh -- ./test_progs -t test_ima
test_ima:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Reported-by: "Geyslan G. Bem" <geyslan@gmail.com>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220307133048.1287644-1-kpsingh@kernel.org
The trailing slash of LIBBPF_SRCS is redundant, remove it. Also inline
it as its only used in LIBBPF_INCLUDE.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220305161013.361646-1-ytcoode@gmail.com
During the process of driver probing, probe function should return < 0
for failure, otherwise kernel will treat value >= 0 as success.
Therefore, the driver should set 'err' to -ENODEV when
'adapter->registered_device_map' is NULL. Otherwise kernel will assume
that the driver has been successfully probed and will cause unexpected
errors.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1646546192-32737-1-git-send-email-zheyuma97@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pragma unroll was introduced around GCC 8, whereas current xsk code in
ice that prepares loop_unrolled_for macro that is based on mentioned
pragma, compares GCC version against 4, which is wrong and Stephen
found this out by compiling kernel with GCC 5.4 [0].
Fix this mistake and check if GCC version is >= 8.
[0]: https://lore.kernel.org/netdev/20220307213659.47658125@canb.auug.org.au/
Fixes: 126cdfe100 ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20220307231353.56638-1-maciej.fijalkowski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the following coccicheck warning:
tools/lib/bpf/bpf.c:114:31-32: WARNING: Use ARRAY_SIZE
tools/lib/bpf/xsk.c:484:34-35: WARNING: Use ARRAY_SIZE
tools/lib/bpf/xsk.c:485:35-36: WARNING: Use ARRAY_SIZE
It has been tested with gcc (Debian 8.3.0-6) 8.3.0 on x86_64.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220306023426.19324-1-guozhengkui@vivo.com
xsk_umem__create() does mmap for fill/comp rings, but xsk_umem__delete()
doesn't do the unmap. This works fine for regular cases, because
xsk_socket__delete() does unmap for the rings. But for the case that
xsk_socket__create_shared() fails, umem rings are not unmapped.
fill_save/comp_save are checked to determine if rings have already be
unmapped by xsk. If fill_save and comp_save are NULL, it means that the
rings have already been used by xsk. Then they are supposed to be
unmapped by xsk_socket__delete(). Otherwise, xsk_umem__delete() does the
unmap.
Fixes: 2f6324a393 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Cheng Li <lic121@chinatelecom.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220301132623.GA19995@vscode.7~
The previous check handled the "if (!nh)" condition so we know "nh"
is non-NULL here. Delete the check and pull the code in one tab.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Roopa Prabhu <roopa@nvidia.com>
Link: https://lore.kernel.org/r/20220307125735.GC16710@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KVM PR does not implement address translation modes on interrupt, so it
must not allow H_SET_MODE to succeed. The behaviour change caused by
this mode is architected and not advisory (interrupts *must* behave
differently).
QEMU does not deal with differences in AIL support in the host. The
solution to that is a spapr capability and corresponding KVM CAP, but
this patch does not break things more than before (the host behaviour
already differs, this change just disallows some modes that are not
implemented properly).
By happy coincidence, this allows PR Linux guests that are using the SCV
facility to boot and run, because Linux disables the use of SCV if AIL
can not be set to 3. This does not fix the underlying problem of missing
SCV support (an OS could implement real-mode SCV vectors and try to
enable the facility). The true fix for that is for KVM PR to emulate scv
interrupts from the facility unavailable interrupt.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Link: https://lore.kernel.org/r/20220222064727.2314380-3-npiggin@gmail.com
PR KVM does not support running with AIL enabled, and SCV does is not
supported with AIL disabled. Fix this by ensuring the SCV facility is
disabled with FSCR while a CPU could be running with AIL=0.
The PowerNV host supports disabling AIL on a per-CPU basis, so SCV just
needs to be disabled when a vCPU is being run.
The pSeries machine can only switch AIL on a system-wide basis, so it
must disable SCV support at boot if the configuration can potentially
run a PR KVM guest.
Also ensure a the FSCR[SCV] bit can not be enabled when emulating
mtFSCR for the guest.
SCV is not emulated for the PR guest at the moment, this just fixes the
host crashes.
Alternatives considered and rejected:
- SCV support can not be disabled by PR KVM after boot, because it is
advertised to userspace with HWCAP.
- AIL can not be disabled on a per-CPU basis. At least when running on
pseries it is a per-LPAR setting.
- Support for real-mode SCV vectors will not be added because they are
at 0x17000 so making such a large fixed head space causes immediate
value limits to be exceeded, requiring a lot rework and more code.
- Disabling SCV for any PR KVM possible kernel will cause a slowdown
when not using PR KVM.
- A boot time option to disable SCV to use PR KVM is user-hostile.
- System call instruction emulation for SCV facility unavailable
instructions is too complex and old emulation code was subtly broken
and removed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Link: https://lore.kernel.org/r/20220222064727.2314380-2-npiggin@gmail.com
Merge this branch from the KVM tree to bring in a new KVM capability
KVM_CAP_PPC_AIL_MODE_3.
It also brings in some unrelated KVM changes as well as v5.17-rc3.
which support eIBRS, i.e., the hardware-assisted speculation restriction
after it has been shown that such machines are vulnerable even with the
hardware mitigation.
- Do not use the default LFENCE-based Spectre v2 mitigation on AMD as it
is insufficient to mitigate such attacks. Instead, switch to retpolines
on all AMD by default.
- Update the docs and add some warnings for the obviously vulnerable
cmdline configurations.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmIkktUACgkQEsHwGGHe
VUo7ZQ/+O4hzL/tHY0V/ekkDxCrJ3q3Hp+DcxUl2ee5PC3Qgxv1Z1waH6ppK8jQs
marAGr7FYbvzY039ON7irxhpSIckBCpx9tM2F43zsPxxY8EdxGojkHbmaqso5HtW
l3/O28AcZYoKN/fF8rRAIJy4hrTVascKrNJ2fOiYWYBT62ZIoPm0FusgXbKTZPD+
gT7iUMoyPjBnKdWDT9L6kKOxDF9TivX1Y6JdDHbnnBsgRkeFatkeq9BJ93M73q63
Ziq9c8ZcEXyKez+cGFCfXM7+pNYmfsiL48lilTyf+v+GXahDJQOkFw39j5zXEALm
Nk6yB3PRQ74pEwm5WbK7KO8iwPpblmnDB978mfUcpk+9xWJD8pyoUcItAmCBsXh1
LjIImYPqL6YihUb9udh+PEDISsfzWNzr4T+kgW9/yXXG4ZmGy3TLInhTK+rNAxJa
EshWZExEZj6yJvt83Vu08W9fppYJq976tJvl8LWOYthaxqY7IQz0q7mYd799yxk0
MLPqvZP1+4pHzqn2c9yeHgrwHwMmoqcyMx6B3EA5maYQPdlT7Fk9RCBeCdIA/ieF
OgGxy1WwMH+cvUa5MaBy3Y32LeYU3bUJh0yPFq/7BxEYGG9PJtLhg2xTo1Ui8F1d
fKrcSFcjZKVJ9UE5HaqOcp4ka+Q220I9IDGURXkAFQlnOU7X7CE=
=Athd
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 spectre fixes from Borislav Petkov:
- Mitigate Spectre v2-type Branch History Buffer attacks on machines
which support eIBRS, i.e., the hardware-assisted speculation
restriction after it has been shown that such machines are vulnerable
even with the hardware mitigation.
- Do not use the default LFENCE-based Spectre v2 mitigation on AMD as
it is insufficient to mitigate such attacks. Instead, switch to
retpolines on all AMD by default.
- Update the docs and add some warnings for the obviously vulnerable
cmdline configurations.
* tag 'x86_bugs_for_v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Warn about eIBRS + LFENCE + Unprivileged eBPF + SMT
x86/speculation: Warn about Spectre v2 LFENCE mitigation
x86/speculation: Update link to AMD speculation whitepaper
x86/speculation: Use generic retpoline by default on AMD
x86/speculation: Include unprivileged eBPF status in Spectre v2 mitigation reporting
Documentation/hw-vuln: Update spectre doc
x86/speculation: Add eIBRS + Retpoline options
x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE
This reverts commit 6deaa3bbca ("s390: extend expoline to BC
instructions"). Expolines to BC instructions were added to be utilized
by commit de5cb6eb51 ("s390: use expoline thunks in the BPF JIT"). But
corresponding code has been removed by commit e1cf4befa2 ("bpf, s390x:
remove ld_abs/ld_ind"). And compiler does not generate such expolines as
well.
Compared to regular expolines, expolines to BC instructions contain
displacement and all possible variations cannot be generated in advance,
making kpatch support more complicated. So, remove those to avoid
future usages.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Change struct ext_code to contain a union which allows to simply
assign the int_code instead of using a cast.
In order to keep the patch small the anonymous union is embedded
within the existing struct instead of changing the struct ext_code to
a union.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add a proper union in lowcore to reflect architecture and get rid of a
"magic" cast in order to read the full per code.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add a proper union in lowcore to reflect architecture and get rid of a
"magic" cast in order to read the full program interruption code.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Fix the following build warning with W=1
arch/s390/lib/test_unwind.c:172:21: warning: variable 'fops' set but not used [-Wunused-but-set-variable]
struct ftrace_ops *fops;
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
