This patch added a new function chk_fclose_nr() to check the numbers
of the MP_FASTCLOSE sending and receiving mibs.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch added two more mibs for MP_FASTCLOSE, MPTCP_MIB_MPFASTCLOSETX
for the MP_FASTCLOSE sending and MPTCP_MIB_MPFASTCLOSERX for receiving.
Also added a debug log for MP_FASTCLOSE receiving, printed out the recv_key
of MP_FASTCLOSE in mptcp_parse_option to show that MP_RST is received.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The number of self tests in mptcp_join.sh will soon be more than 100, the
output alignment is no longer OK. This patch adjusted it.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on
static allocation of IRQ resources in DT core code, this
causes an issue when using hierarchical interrupt domains
using "interrupts" property in the node as this bypassed
the hierarchical setup and messed up the irq chaining.
In preparation for removal of static setup of IRQ resource
from DT core code use platform_get_irq().
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Link: https://lore.kernel.org/r/20220303100815.25605-1-tangmeng@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This PHY doesn't support a link-up interrupt source. If aneg is enabled
we use the "aneg complete" interrupt for this purpose, but if aneg is
disabled link-up isn't signaled currently.
According to a vendor driver there's an additional "energy detect"
interrupt source that can be used to signal link-up if aneg is disabled.
We can safely ignore this interrupt source if aneg is enabled.
This patch was tested on a TX3 Mini TV box with S905W (even though
boot message says it's a S905D).
This issue has been existing longer, but due to changes in phylib and
the driver the patch applies only from the commit marked as fixed.
Fixes: 84c8f773d2 ("net: phy: meson-gxl: remove the use of .ack_callback()")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/04cac530-ea1b-850e-6cfa-144a55c4d75d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variables 'res' inside the functions sparx5_ptp_get_1ppm and
sparx5_ptp_get_nominal_value was not initialized. So in case of the default
case of the switch after, it would return an uninitialized variable.
This makes also the clang builds to failed.
Fixes: 0933bd0404 ("net: sparx5: Add support for ptp clocks")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220304140918.3356873-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add new PID/VID (0x13d3/0x3567) for MT7921
- Add new PID/VID (0x2550/0x8761) for Realtek 8761BU
- Add support for LG LGSBWAC02 (MT7663BUN)
- Add support for BCM43430A0 and BCM43430A1
- Add support for Intel Madison Peak (MsP2)
-----BEGIN PGP SIGNATURE-----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=2uvT
-----END PGP SIGNATURE-----
Merge tag 'for-net-next-2022-03-04' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add new PID/VID (0x13d3/0x3567) for MT7921
- Add new PID/VID (0x2550/0x8761) for Realtek 8761BU
- Add support for LG LGSBWAC02 (MT7663BUN)
- Add support for BCM43430A0 and BCM43430A1
- Add support for Intel Madison Peak (MsP2)
* tag 'for-net-next-2022-03-04' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (21 commits)
Bluetooth: btusb: Add another Realtek 8761BU
Bluetooth: hci_bcm: add BCM43430A0 & BCM43430A1
Bluetooth: use memset avoid memory leaks
Bluetooth: btmtksdio: Fix kernel oops when sdio suspend.
Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921
Bluetooth: move adv_instance_cnt read within the device lock
Bluetooth: hci_event: Add missing locking on hdev in hci_le_ext_adv_term_evt
Bluetooth: btusb: Make use of of BIT macro to declare flags
Bluetooth: Fix not checking for valid hdev on bt_dev_{info,warn,err,dbg}
Bluetooth: mediatek: fix the conflict between mtk and msft vendor event
Bluetooth: mt7921s: support bluetooth reset mechanism
Bluetooth: make array bt_uuid_any static const
Bluetooth: 6lowpan: No need to clear memory twice
Bluetooth: btusb: Improve stability for QCA devices
Bluetooth: btusb: add support for LG LGSBWAC02 (MT7663BUN)
Bluetooth: btusb: Add support for Intel Madison Peak (MsP2) device
Bluetooth: Improve skb handling in mgmt_device_connected()
Bluetooth: Fix skb allocation in mgmt_remote_name() & mgmt_device_connected()
Bluetooth: mgmt: Remove unneeded variable
Bluetooth: hci_sync: fix undefined return of hci_disconnect_all_sync()
...
====================
Link: https://lore.kernel.org/r/20220304193919.649815-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2022-03-04
We've added 32 non-merge commits during the last 14 day(s) which contain
a total of 59 files changed, 1038 insertions(+), 473 deletions(-).
The main changes are:
1) Optimize BPF stackmap's build_id retrieval by caching last valid build_id,
as consecutive stack frames are likely to be in the same VMA and therefore
have the same build id, from Hao Luo.
2) Several improvements to arm64 BPF JIT, that is, support for JITing
the atomic[64]_fetch_add, atomic[64]_[fetch_]{and,or,xor} and lastly
atomic[64]_{xchg|cmpxchg}. Also fix the BTF line info dump for JITed
programs, from Hou Tao.
3) Optimize generic BPF map batch deletion by only enforcing synchronize_rcu()
barrier once upon return to user space, from Eric Dumazet.
4) For kernel build parse DWARF and generate BTF through pahole with enabled
multithreading, from Kui-Feng Lee.
5) BPF verifier usability improvements by making log info more concise and
replacing inv with scalar type name, from Mykola Lysenko.
6) Two follow-up fixes for BPF prog JIT pack allocator, from Song Liu.
7) Add a new Kconfig to allow for loading kernel modules with non-matching
BTF type info; their BTF info is then removed on load, from Connor O'Brien.
8) Remove reallocarray() usage from bpftool and switch to libbpf_reallocarray()
in order to fix compilation errors for older glibc, from Mauricio Vásquez.
9) Fix libbpf to error on conflicting name in BTF when type declaration
appears before the definition, from Xu Kuohai.
10) Fix issue in BPF preload for in-kernel light skeleton where loaded BPF
program fds prevent init process from setting up fd 0-2, from Yucong Sun.
11) Fix libbpf reuse of pinned perf RB map when max_entries is auto-determined
by libbpf, from Stijn Tintel.
12) Several cleanups for libbpf and a fix to enforce perf RB map #pages to be
non-zero, from Yuntao Wang.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (32 commits)
bpf: Small BPF verifier log improvements
libbpf: Add a check to ensure that page_cnt is non-zero
bpf, x86: Set header->size properly before freeing it
x86: Disable HAVE_ARCH_HUGE_VMALLOC on 32-bit x86
bpf, test_run: Fix overflow in XDP frags bpf_test_finish
selftests/bpf: Update btf_dump case for conflicting names
libbpf: Skip forward declaration when counting duplicated type names
bpf: Add some description about BPF_JIT_ALWAYS_ON in Kconfig
bpf, docs: Add a missing colon in verifier.rst
bpf: Cache the last valid build_id
libbpf: Fix BPF_MAP_TYPE_PERF_EVENT_ARRAY auto-pinning
bpf, selftests: Use raw_tp program for atomic test
bpf, arm64: Support more atomic operations
bpftool: Remove redundant slashes
bpf: Add config to allow loading modules with BTF mismatches
bpf, arm64: Feed byte-offset into bpf line info
bpf, arm64: Call build_prologue() first in first JIT pass
bpf: Fix issue with bpf preload module taking over stdout/stdin of kernel.
bpftool: Bpf skeletons assert type sizes
bpf: Cleanup comments
...
====================
Link: https://lore.kernel.org/r/20220304164313.31675-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=drk+
-----END PGP SIGNATURE-----
Merge tag 'block-5.17-2022-03-04' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Just a small UAF fix for blktrace"
* tag 'block-5.17-2022-03-04' of git://git.kernel.dk/linux-block:
blktrace: fix use after free for struct blk_trace
While the DT Spec says 'cpu-release-addr' is always 64-bit, some 32-bit Arm
DTs used a 32-bit value. We're now stuck with those cases, so add uint32 as
a valid type.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220303165710.1859862-1-robh@kernel.org
For hardware that only supports 32-bit writes to PCI there is the
possibility of clearing RW1C (write-one-to-clear) bits. A rate-limited
messages was introduced by fb26592301, but rate-limiting is not the best
choice here. Some devices may not show the warnings they should if another
device has just produced a bunch of warnings. Also, the number of messages
can be a nuisance on devices which are otherwise working fine.
Change the ratelimit to a single warning per bus. This ensures no bus is
'starved' of emitting a warning and also that there isn't a continuous
stream of warnings. It would be preferable to have a warning per device,
but the pci_dev structure is not available here, and a lookup from devfn
would be far too slow.
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Fixes: fb26592301 ("PCI: Warn on possible RW1C corruption for sub-32 bit config writes")
Link: https://lore.kernel.org/r/20200806041455.11070-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Abstract the alloc_cqc() into several parts and separate the process
unrelated to allocating CQC.
Link: https://lore.kernel.org/r/20220302064830.61706-10-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Abstract the alloc_srqc() into several parts and separate the alloc_srqn()
from the alloc_srqc().
Link: https://lore.kernel.org/r/20220302064830.61706-9-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
hns_roce_alloc_cmd_mailbox() never returns NULL, so the check should be
IS_ERR(). And the error code should be converted as the function's return
value.
Link: https://lore.kernel.org/r/20220302064830.61706-8-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The current mailbox functions have too many parameters, making the code
difficult to maintain. So construct a new structure mbox_msg to pass the
information needed by mailbox.
Link: https://lore.kernel.org/r/20220302064830.61706-6-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The "op" field of the mailbox occupies 8 bits, so the parameter "op"
should be of type u8.
Link: https://lore.kernel.org/r/20220302064830.61706-5-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The parameter "out_param" of the mailbox is always null when the context is
destroyed. So remove the function parameter "mailbox".
Link: https://lore.kernel.org/r/20220302064830.61706-4-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The value of the function parameter “timeout” is unique. Therefore,
it is unnecessary to specify the parameter “timeout” value each time.
So remove it.
Link: https://lore.kernel.org/r/20220302064830.61706-3-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The parameter "op_modifier" is only used for HIP06. It is useless for HIP08
and later versions. After removing HIP06, this parameter is no longer used,
so remove it.
Link: https://lore.kernel.org/r/20220302064830.61706-2-liangwenpeng@huawei.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This driver supports several chip variants which all share the same I2C
register interface. Since the chip will turn off and become inaccessible
under conditions outside of software control (e.g. upon button press or
input voltage removal), some special handling is needed to delay the
initialization of the IC until it is accessible.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Some Injoinic power bank ICs feature an I2C interface which allows
monitoring and controlling the battery charger and boost converter.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add prefix for Injoinic Technology Corp. (http://www.injoinic.com/)
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
ib_destroy_qp() would called by ib_create_qp_user() if error, the former
contains ib_qp_usecnt_dec(), but ib_qp_usecnt_inc() was not called before.
So move ib_qp_usecnt_inc() into create_qp().
Fixes: d2b10794fc ("RDMA/core: Create clean QP creations interface for uverbs")
Link: https://lore.kernel.org/r/20220303024232.2847388-1-yajun.deng@linux.dev
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Kernel test robot reported below warning ->
drivers/power/supply/ab8500_chargalg.c:790:13: warning:
variable 'delta_i_ua' set but not used [-Wunused-but-set-variable]
Remove unused variable delta_i_ua.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The AIP code signals the phys_mtu in the following query_port()
fragment:
props->phys_mtu = HFI1_CAP_IS_KSET(AIP) ? hfi1_max_mtu :
ib_mtu_enum_to_int(props->max_mtu);
Using the largest MTU possible should not depend on AIP.
Fix by unconditionally using the hfi1_max_mtu value.
Fixes: 6d72344cf6 ("IB/ipoib: Increase ipoib Datagram mode MTU's upper limit")
Link: https://lore.kernel.org/r/1644348309-174874-1-git-send-email-mike.marciniszyn@cornelisnetworks.com
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The print function dev_err() is redundant because
platform_get_irq_byname() already prints an error.
Eliminate the follow coccicheck warning:
./drivers/power/supply/da9150-fg.c:524:2-9: line 524 is redundant
because platform_get_irq() already prints an error
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There are a few spelling mistakes in comments and in a dev_err
error message. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
We add the line impedance to the inner resistance determined
from the battery voltage or other means to improve the
capacity estimations.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
To improve the inner resistance measurement of the battery we need
to account for the line impedance of the connector to the battery.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Remove dev_err() messages after platform_get_irq*() failures.
platform_get_irq() already prints an error.
Generated by: scripts/coccinelle/api/platform_get_irq.cocci
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Remove dev_err() messages after platform_get_irq*() failures.
platform_get_irq() already prints an error.
Generated by: scripts/coccinelle/api/platform_get_irq.cocci
Signed-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In free_charger_irq(), there is no free for 'WM8350_IRQ_CHG_FAST_RDY'.
Therefore, it should be better to add it in order to avoid the memory leak.
Fixes: 14431aa0c5 ("power_supply: Add support for WM8350 PMU")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid same code.
Fixes: 14431aa0c5 ("power_supply: Add support for WM8350 PMU")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If we detect a Samsung SDI battery, we return a static
struct power_supply_battery_info and avoid looking further.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Any app controlled perfcntr collection (GL_AMD_performance_monitor, etc)
does not require counters to maintain state across context switches. So
clear them if systemwide profiling is not active.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-5-robdclark@gmail.com
Add a SYSPROF param for system profiling tools like Mesa's pps-producer
(perfetto) to control behavior related to system-wide performance
counter collection. In particular, for profiling, one wants to ensure
that GPU context switches do not effect perfcounter state, and might
want to suppress suspend (which would cause counters to lose state).
v2: Swap the order in msm_file_private_set_sysprof() [sboyd] and
initialize the sysprof_active refcount to one (because the under/
overflow checking in refcount_t doesn't expect a 0->1 transition)
meaning that values greater than 1 means sysprof is active.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-4-robdclark@gmail.com
Since switch to simplefb/simpledrm VESA graphic mode selection with vga=
kernel parameter is no longer available with legacy BIOS.
The x86 realmode boot code enables the VESA graphic modes when option
FB_BOOT_VESA_SUPPORT is enabled.
This option is selected by vesafb but not simplefb/simpledrm.
To enable use of VESA modes with simplefb in legacy BIOS boot mode drop
dependency of BOOT_VESA_SUPPORT on FB, also drop the FB_ prefix. Select
the option from sysfb rather than the drivers that depend on it.
The BOOT_VESA_SUPPORT is not specific to framebuffer but rather to x86
platform, move it from fbdev to x86 Kconfig.
Fixes: e3263ab389 ("x86: provide platform-devices for boot-framebuffers")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/948c39940a4e99f5b43bdbcbe537faae71a43e1d.1645822213.git.msuchanek@suse.de
* Fixes for a handful of KASAN-related crashes.
* A fix to avoid a crash during boot for SPARSEMEM && !SPARSEMEM_VMEMMAP
configurations.
* A fix to stop reporting some incorrect errors under DEBUG_VIRTUAL.
* A fix for the K210's device tree to properly populate the interrupt
map, so hart1 will get interrupts again.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAmIiNtYTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRDvTKFQLMurQf8cD/92NMaclwHMVjQ07svZloQcgDp+JSA5
JP2EYHuDy3UCZsJSdJY8zJZ+Ct81MxNSNDDpLCLQCZe8fD8hA+FOOVlt8a21SqNH
Pc96ycqIhD/QrfBlcYw5+8N3n5zNTpPSMjazrBphKj56qNWcAXdvQwQTh56pXGj+
3J5vf3L8xlnx8mlTUMYqHivHKl4cJhYOY/ICwXjpZnRYx0NRF32cquo5A4Uh65ls
qQjeKL2WXZd44avWK9IkDcBLpjyxr+pJmCsbIntvwK23bz37/SXmk4G2f5/8sBtH
RK6RDLU1LIH8YNCq5KvAv9/qZZPkuvOKig//lWfcsOLYv43+bp2cGVlO4Z4gvUw3
qRsrQxXxS+FQFxH5Fxre7UWqLlM9EUHUdbx/aXyGSF5e1DXuD8GcDSt0pOwQboiu
xKqRxuMozr6ZiHlug3mUcEwzeDAHOwPWrIDSXNELMj+5r/8QogkcPaFUFFqmvigj
gIwGMiPKe0nQ9XfAUAsjVTL3ozlGXa6nabbVNnA4N05a/scToy3hnFkYo2iEpjyH
0sxyQ96AaKnN4ydWBsy+y/HA13CbWRP+dgfgaG1BaWQCQ4kh/FN3A3FYpvubBjIm
5rslXvsmWEkCt/U/K0BY3t6Pvw9GNryAXWDsyPACaVFjMErZPqwwkRtp1PqoKpd6
XiYQ1nJxgZPCRQ==
=Ff5J
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Fixes for a handful of KASAN-related crashes.
- A fix to avoid a crash during boot for SPARSEMEM &&
!SPARSEMEM_VMEMMAP configurations.
- A fix to stop reporting some incorrect errors under DEBUG_VIRTUAL.
- A fix for the K210's device tree to properly populate the interrupt
map, so hart1 will get interrupts again.
* tag 'riscv-for-linus-5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: k210: fix broken IRQs on hart1
riscv: Fix kasan pud population
riscv: Move high_memory initialization to setup_bootmem
riscv: Fix config KASAN && DEBUG_VIRTUAL
riscv: Fix DEBUG_VIRTUAL false warnings
riscv: Fix config KASAN && SPARSEMEM && !SPARSE_VMEMMAP
riscv: Fix is_linear_mapping with recent move of KASAN region
It was always expected to have a use for this some day, so we left a
placeholder. Now we do. (And I expect another use in the not too
distant future when we start allowing userspace to allocate GPU iova.)
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-3-robdclark@gmail.com
Update headers from mesa commit:
commit 7e63fa2bb13cf14b765ad06d046789ee1879b5ef
Author: Rob Clark <robclark@freedesktop.org>
AuthorDate: Wed Mar 2 17:11:10 2022 -0800
freedreno/registers: Add a couple regs we need for kernel
Signed-off-by: Rob Clark <robdclark@chromium.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15221>
Signed-off-by: Rob Clark <robdclark@chromium.org>
[for display bits:]
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220304005317.776110-2-robdclark@gmail.com
Hotplug events reported by bridge drivers over drm_bridge_hpd_notify()
get ignored unless somebody calls drm_bridge_hpd_enable(). When the
connector for the bridge is bridge_connector, such a call is done from
drm_bridge_connector_enable_hpd().
However drm_bridge_connector_enable_hpd() is never called on init paths,
documentation suggests that it is intended for suspend/resume paths.
In result, once encoders are switched to bridge_connector,
bridge-detected HPD stops working.
This patch adds a call to that API on init path.
This fixes HDMI HPD with rcar-du + adv7513 case when adv7513 reports HPD
events via interrupts.
Fixes: c24110a8fd ("drm: rcar-du: Use drm_bridge_connector_init() helper")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211225063151.2110878-1-nikita.yoush@cogentembedded.com
Use the helpers instead of open coding them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Using local kmaps slightly reduces the chances to stray writes, and
the bvec interface cleans up the code a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20220303111905.321089-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
