Convert pgtable code so pte_val()/pXd_val() aren't used as lvalue
anymore. This allows in later step to convert pte_val()/pXd_val() to
functions, which in turn makes it impossible to use these macros to
modify page table entries like they have been used before.
Therefore a construct like this:
pte_val(*pte) = __pa(addr) | prot;
which would directly write into a page table, isn't possible anymore
with the last step of this series.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use the new set_pXd()/set_pte() helper functions at all places where
page table entries are modified.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add set_pte_bit()/clear_pte_bit() and set_pXd_bit()/clear_pXd_bit
helper functions which are supposed to be used if bits within
ptes/pXds are set/cleared.
The only point of these helper functions is to get more readable
code. This is quite similar to what arm64 has.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add set_pXd()/set_pte() helper functions which must be used to update
page table entries. The new helpers use WRITE_ONCE() to make sure that
a page table entry is written to only once.
Without this the compiler could otherwise generate code which writes
several times to a page table entry when updating its contents from
invalid to valid, which could lead to surprising results especially
for multithreaded processes...
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Finally use epsw to create a complete psw mask within pt_regs. Without
this only some bits are correct, while other bits are (incorrectly)
always zero.
The epsw instruction is quite heavy weight, however given that this
only effects ftrace_regs_caller this seems to be the right thing, so
we finally get a complete psw mask for ftrace kprobed functions.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Remove opencoded offsetof and use offsetof instead.
The generated code is identical before/after this change.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
With commit 5789284710 ("s390/smp: reallocate IPL CPU lowcore")
virtual addresses are wrongly passed to memblock_free_late() and
SPX instructions on IPL CPU reinitialization.
Note: this does not fix a bug currently, since virtual and
physical addresses are identical.
Fixes: 5789284710 ("s390/smp: reallocate IPL CPU lowcore")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch switches the sysfs attribute /sys/bus/ap/scans
from read-only to read-write. If there is something written
to this attribute, an AP bus rescan is forced. If an AP
bus scan is triggered this way a debug feature entry line
reports this in /sys/kernel/debug/s390dbf/ap/sprintf.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Jakob Naucke <naucke@linux.ibm.com>
Reviewed-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This patch introduces an extension to the ap bus to notify device drivers
when the host AP configuration changes - i.e., adapters, domains or
control domains are added or removed. When an adapter or domain is added to
the host's AP configuration, the AP bus will create the associated queue
devices in the linux sysfs device model. Each new type 10 (i.e., CEX4) or
newer queue device with an APQN that is not reserved for the default device
driver will get bound to the vfio_ap device driver. Likewise, whan an
adapter or domain is removed from the host's AP configuration, the AP bus
will remove the associated queue devices from the sysfs device model. Each
of the queues that is bound to the vfio_ap device driver will get unbound.
With the introduction of hot plug support, binding or unbinding of a
queue device will result in plugging or unplugging one or more queues from
a guest that is using the queue. If there are multiple changes to the
host's AP configuration, it could result in the probe and remove callbacks
getting invoked multiple times. Each time queues are plugged into or
unplugged from a guest, the guest's VCPUs must be taken out of SIE.
If this occurs multiple times due to changes in the host's AP
configuration, that can have an undesirable negative affect on the guest's
performance.
To alleviate this problem, this patch introduces two new callbacks: one to
notify the vfio_ap device driver when the AP bus scan routine detects a
change to the host's AP configuration; and, one to notify the driver when
the AP bus is done scanning. This will allow the vfio_ap driver to do
bulk processing of all affected adapters, domains and control domains for
affected guests rather than plugging or unplugging them one at a time when
the probe or remove callback is invoked. The two new callbacks are:
void (*on_config_changed)(struct ap_config_info *new_config_info,
struct ap_config_info *old_config_info);
This callback is invoked at the start of the AP bus scan
function when it determines that the host AP configuration information
has changed since the previous scan. This is done by storing
an old and current QCI info struct and comparing them. If there is any
difference, the callback is invoked.
void (*on_scan_complete)(struct ap_config_info *new_config_info,
struct ap_config_info *old_config_info);
The on_scan_complete callback is invoked after the ap bus scan is
completed if the host AP configuration data has changed.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Introduces a new driver callback to prevent a root user from re-assigning
the APQN of a queue that is in use by a non-default host device driver to
a default host device driver and vice versa. The callback will be invoked
whenever a change to the AP bus's sysfs apmask or aqmask attributes would
result in one or more APQNs being re-assigned. If the callback responds
in the affirmative for any driver queried, the change to the apmask or
aqmask will be rejected with a device busy error.
For this patch, only non-default drivers will be queried. Currently,
there is only one non-default driver, the vfio_ap device driver. The
vfio_ap device driver facilitates pass-through of an AP queue to a
guest. The idea here is that a guest may be administered by a different
sysadmin than the host and we don't want AP resources to unexpectedly
disappear from a guest's AP configuration (i.e., adapters and domains
assigned to the matrix mdev). This will enforce the proper procedure for
removing AP resources intended for guest usage which is to
first unassign them from the matrix mdev, then unbind them from the
vfio_ap device driver.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Running kprobe test on a kernel built with clang 14 didn't actually
trigger pgm_pre_handler() and no unwinder code was called. Even though
do_report_trap() is a global symbol, clang inlined it in several local
functions including illegal_op() handler, so that kprobbing a global
symbol didn't have a desired effect.
To achieve the same test result (unwinding from a program check
handler) introduce a local function and probe an instruction in the
middle, so that kprobe doesn't take KPROBE_ON_FTRACE path.
While at it, add another test for KPROBE_ON_FTRACE.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
By default no backtraces are printed when a test succeeds, but sometimes
it is useful to spot issues automated test doesn't cover. Add "backtrace"
module parameter to force it.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
-mpacked-stack option has been supported by both minimum
gcc and clang versions for a while. With commit e2bc3e91d9
("scripts/min-tool-version.sh: Raise minimum clang version to 13.0.0
for s390") minimum clang version now also supports a combination
of flags -mpacked-stack -mbackchain -pg -mfentry and fulfills
all requirements to always enable the packed stack layout.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This helps to avoid several merge conflicts later.
* fixes:
s390/extable: fix exception table sorting
s390/ftrace: fix arch_ftrace_get_regs implementation
s390/ftrace: fix ftrace_caller/ftrace_regs_caller generation
s390/setup: preserve memory at OLDMEM_BASE and OLDMEM_SIZE
s390/cio: verify the driver availability for path_event call
s390/module: fix building test_modules_helpers.o with clang
MAINTAINERS: downgrade myself to Reviewer for s390
MAINTAINERS: add Alexander Gordeev as maintainer for s390
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
second patch was supposed to fix the first, but in reality it was
just as broken, so both have to go.
x86 host:
* Revert incorrect assumption that cr3 changes come with preempt notifier
callbacks (they don't when static branches are changed, for example)
ARM host:
* Correctly synchronise PMR and co on PSCI CPU_SUSPEND
* Skip tests that depend on GICv3 when the HW isn't available
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmIeGnUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMCYgf9GPVUOQUbHVxVqvKB1ABnY3ZIZuS3
+/XLgVifSmXb2sPQmcKIPk7eQkxlzpnVdbznJO5qFMtVKRv/ppj+/ly2wwF8l+rR
m1XvyYo2sukK5vTpBrQiRm3aWY7vpx0ds4DStLnrnBuPF/U7x6WlHSL/BqXaNcSJ
e+SXd/UFhkg7dEQaU3eqXyf2/mMfR2ZLdUb4v+/UiV7kfzzvRqNERd8HUoVk2FcM
VYBr07ChaV4XB/dZsCDVSz2Z7f7rH3sMMW82ZHKjuFUEW4Dij9NiX2ycaeRvkSLG
tnliTuROCY2bOQeIVCTHf5XqCAAm7sA1AoClFaUy30+UW9s9j45NuhUQbA==
=nuHK
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"The bigger part of the change is a revert for x86 hosts. Here the
second patch was supposed to fix the first, but in reality it was just
as broken, so both have to go.
x86 host:
- Revert incorrect assumption that cr3 changes come with preempt
notifier callbacks (they don't when static branches are changed,
for example)
ARM host:
- Correctly synchronise PMR and co on PSCI CPU_SUSPEND
- Skip tests that depend on GICv3 when the HW isn't available"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: aarch64: Skip tests if we can't create a vgic-v3
Revert "KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"
Revert "KVM: VMX: Save HOST_CR3 in vmx_set_host_fs_gs()"
KVM: arm64: Don't miss pending interrupts for suspended vCPU
s390 has a swap_ex_entry_fixup function, however it is not being used
since common code expects a swap_ex_entry_fixup define. If it is not
defined the default implementation will be used. So fix this by adding
a proper define.
However also the implementation of the function must be fixed, since a
NULL value for handler has a special meaning and must not be adjusted.
Luckily all of this doesn't fix a real bug currently: the main extable
is correctly sorted during build time, and for runtime sorting there
is currently no case where the handler field is not NULL.
Fixes: 05a68e892e ("s390/kernel: expand exception table logic to allow new handling options")
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
arch_ftrace_get_regs is supposed to return a struct pt_regs pointer
only if the pt_regs structure contains all register contents, which
means it must have been populated when created via ftrace_regs_caller.
If it was populated via ftrace_caller the contents are not complete
(the psw mask part is missing), and therefore a NULL pointer needs be
returned.
The current code incorrectly always returns a struct pt_regs pointer.
Fix this by adding another pt_regs flag which indicates if the
contents are complete, and fix arch_ftrace_get_regs accordingly.
Fixes: 894979689d ("s390/ftrace: provide separate ftrace_caller/ftrace_regs_caller implementations")
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
ftrace_caller was used for both ftrace_caller and ftrace_regs_caller,
which means that the target address of the hotpatch trampoline was
never updated.
With commit 894979689d ("s390/ftrace: provide separate
ftrace_caller/ftrace_regs_caller implementations") a separate
ftrace_regs_caller entry point was implemeted, however it was
forgotten to implement the necessary changes for ftrace_modify_call
and ftrace_make_call, where the branch target has to be modified
accordingly.
Therefore add the missing code now.
Fixes: 894979689d ("s390/ftrace: provide separate ftrace_caller/ftrace_regs_caller implementations")
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
We need to preserve the values at OLDMEM_BASE and OLDMEM_SIZE which are
used by zgetdump in case when kdump crashes. In that case zgetdump will
attempt to read OLDMEM_BASE and OLDMEM_SIZE in order to find out where
the memory range [0 - OLDMEM_SIZE] belonging to the production kernel is.
Fixes: f1a5469474 ("s390/setup: don't reserve memory that occupied decompressor's head")
Cc: stable@vger.kernel.org # 5.15+
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
VRR capable property is not attached by default to the connector
It is attached only if VRR is supported.
So if the driver tries to call drm core set prop function without
it being attached that causes NULL dereference.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225013055.9282-1-manasi.d.navare@intel.com
The SPI driver wants to know the exact type of the controller. Provide this
information to it, hence allow to fix Intel Wildcat Point case in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The properties are static and not supposed to be modified, constify them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Properties are not and should not be changed in the callee, hence constify
properties parameter in acpi_create_platform_device().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The "No errors detected" message from the ECC code is shown at the end
of the pstore log and can be confusing or misleading, especially since
it usually appears just after a kernel crash log which normally means
quite the opposite of "no errors". Prefix the message to clarify that
this message is only about ECC-detected errors.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220301144932.89549-1-vincent.whitchurch@axis.com
Move initialization of submission-related spinlock, lists and workers to
init_early. This fixes an issue where if the GuC init fails we might
still try to get the lock in the context cleanup code. Note that it is
safe to call the GuC context cleanup code even if the init failed
because all contexts are initialized with an invalid GuC ID, which will
cause the GuC side of the cleanup to be skipped, so it is easier to just
make sure the variables are initialized than to special case the cleanup
to handle the case when they're not.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4932
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215011123.734572-1-daniele.ceraolospurio@intel.com
Partially revert commit 5f501d5556 ("binfmt_elf: reintroduce using
MAP_FIXED_NOREPLACE"), which applied the ET_DYN "total_mapping_size"
logic also to ET_EXEC.
At least ia64 has ET_EXEC PT_LOAD segments that are not virtual-address
contiguous (but _are_ file-offset contiguous). This would result in a
giant mapping attempting to cover the entire span, including the virtual
address range hole, and well beyond the size of the ELF file itself,
causing the kernel to refuse to load it. For example:
$ readelf -lW /usr/bin/gcc
...
Program Headers:
Type Offset VirtAddr PhysAddr FileSiz MemSiz ...
...
LOAD 0x000000 0x4000000000000000 0x4000000000000000 0x00b5a0 0x00b5a0 ...
LOAD 0x00b5a0 0x600000000000b5a0 0x600000000000b5a0 0x0005ac 0x000710 ...
...
^^^^^^^^ ^^^^^^^^^^^^^^^^^^ ^^^^^^^^ ^^^^^^^^
File offset range : 0x000000-0x00bb4c
0x00bb4c bytes
Virtual address range : 0x4000000000000000-0x600000000000bcb0
0x200000000000bcb0 bytes
Remove the total_mapping_size logic for ET_EXEC, which reduces the
ET_EXEC MAP_FIXED_NOREPLACE coverage to only the first PT_LOAD (better
than nothing), and retains it for ET_DYN.
Ironically, this is the reverse of the problem that originally caused
problems with MAP_FIXED_NOREPLACE: overlapping PT_LOAD segments. Future
work could restore full coverage if load_elf_binary() were to perform
mappings in a separate phase from the loading (where it could resolve
both overlaps and holes).
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Reported-by: matoro <matoro_bugzilla_kernel@matoro.tk>
Fixes: 5f501d5556 ("binfmt_elf: reintroduce using MAP_FIXED_NOREPLACE")
Link: https://lore.kernel.org/r/a3edd529-c42d-3b09-135c-7e98a15b150f@leemhuis.info
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Link: https://lore.kernel.org/lkml/ce8af9c13bcea9230c7689f3c1e0e2cd@matoro.tk
Tested-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/lkml/49182d0d-708b-4029-da5f-bc18603440a6@physik.fu-berlin.de
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
This refactors the Qualcomm mdt file loader, to partially decouple it
from the SCM peripheral-authentication-service. This is needed as newer
platforms, such as the Qualcomm SM8450, require the metadata to remain
accessible to TrustZone during a longer time. This is followed by the
introduction of remoteproc drivers for SM8450 (Snapdragon 8 Gen 1).
It changes the way hardware version differences are handled in the LLCC
driver and introduces support for Qualcomm SM8450. While updating the dt
binding for LLCC it also introduces the missing SM8350 compatible.
The ocmem and aoss drivers gains missing put_device() calls and rpmpd
gains a missing check for kcalloc() failure.
The SPM driver is updated to avoid instantiating the SPM cpuidle devices
if the CPUs aren't controlled by SPM, such as when Snapdragon 8916
operates in 32-bit mode without PSCI.
The RPM power-domain driver gains MSM8226 support.
Lastly the socinfo driver gains knowledge about a few new SoCs and
PMICs.
-----BEGIN PGP SIGNATURE-----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=okza
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=vkG6
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.18
This refactors the Qualcomm mdt file loader, to partially decouple it
from the SCM peripheral-authentication-service. This is needed as newer
platforms, such as the Qualcomm SM8450, require the metadata to remain
accessible to TrustZone during a longer time. This is followed by the
introduction of remoteproc drivers for SM8450 (Snapdragon 8 Gen 1).
It changes the way hardware version differences are handled in the LLCC
driver and introduces support for Qualcomm SM8450. While updating the dt
binding for LLCC it also introduces the missing SM8350 compatible.
The ocmem and aoss drivers gains missing put_device() calls and rpmpd
gains a missing check for kcalloc() failure.
The SPM driver is updated to avoid instantiating the SPM cpuidle devices
if the CPUs aren't controlled by SPM, such as when Snapdragon 8916
operates in 32-bit mode without PSCI.
The RPM power-domain driver gains MSM8226 support.
Lastly the socinfo driver gains knowledge about a few new SoCs and
PMICs.
* tag 'qcom-drivers-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (37 commits)
soc: qcom: rpmpd: Add MSM8226 support
dt-bindings: power: rpmpd: Add MSM8226 to rpmpd binding
soc: qcom: mdt_loader: Fix split-firmware condition
dt-bindings: arm: msm: Add LLCC compatible for SM8450
dt-bindings: arm: msm: Add LLCC compatible for SM8350
soc: qcom: llcc: Add configuration data for SM8450 SoC
soc: qcom: llcc: Update register offsets for newer LLCC HW
soc: qcom: llcc: Add missing llcc configuration data
soc: qcom: llcc: Add write-cache cacheable support
soc: qcom: llcc: Update the logic for version info extraction
soc: qcom: llcc: Add support for 16 ways of allocation
soc: qcom: socinfo: Add some more PMICs and SoCs
firmware: qcom: scm: Add support for MC boot address API
firmware: qcom: scm: Drop cpumask parameter from set_boot_addr()
firmware: qcom: scm: Simplify set_cold/warm_boot_addr()
cpuidle: qcom-spm: Check if any CPU is managed by SPM
remoteproc: qcom: pas: Add SM8450 remoteproc support
dt-bindings: remoteproc: qcom: pas: Add SM8450 PAS compatibles
remoteproc: qcom: pas: Carry PAS metadata context
soc: qcom: mdt_loader: Extract PAS operations
...
Link: https://lore.kernel.org/r/20220301042055.1804859-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* irq/qcom-pdc-cleanup:
: .
: Spring cleanup for the Qualcomm PDC driver, simplifying its
: use of irq domains, replacing open-coded functionnalities with
: the core code equivalent, and fixing the dodgy locking.
: .
irqchip/qcom-pdc: Drop open coded version of __assign_bit()
irqchip/qcom-pdc: Fix broken locking
irqchip/qcom-pdc: Kill qcom_pdc_translate helper
irqchip/qcom-pdc: Kill non-wakeup irqdomain
irqchip/qcom-pdc: Kill PDC_NO_PARENT_IRQ
Signed-off-by: Marc Zyngier <maz@kernel.org>
There is a spelling mistake in a pr_info() message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
drivers/powercap/dtpm.c:525:22: warning: symbol 'dtpm_node_callback' was not declared. Should it be static?
Fixes: 3759ec678e ("powercap/drivers/dtpm: Add hierarchy creation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If an invalid option is given for "test_suspend=<option>", the entire
string is added to init's environment, so return 1 instead of 0 from
the __setup handler.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
test_suspend=invalid"
and
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
test_suspend=invalid
Fixes: 2ce986892f ("PM / sleep: Enhance test_suspend option with repeat capability")
Fixes: 27ddcc6596 ("PM / sleep: Add state field to pm_states[] entries")
Fixes: a9d7052363 ("PM: Separate suspend to RAM functionality from core")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If an invalid value is used in "resumedelay=<seconds>", it is
silently ignored. Add a warning message and then let the __setup
handler return 1 to indicate that the kernel command line option
has been handled.
Fixes: 317cf7e5e8 ("PM / hibernate: convert simple_strtoul to kstrtoul")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This cpupower update for Linux 5.18-rc1 adds AMD P-State Support to
cpupower tool. AMD P-State kernel support went into 5.17-rc1.
-----BEGIN PGP SIGNATURE-----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=PP0E
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility updates for 5.18-rc1 from Shuah Khan:
"This cpupower update for Linux 5.18-rc1 adds AMD P-State Support to
cpupower tool. AMD P-State kernel support went into 5.17-rc1."
* tag 'linux-cpupower-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Add "perf" option to print AMD P-State information
cpupower: Add function to print AMD P-State performance capabilities
cpupower: Move print_speed function into misc helper
cpupower: Enable boost state support for AMD P-State module
cpupower: Add AMD P-State sysfs definition and access helper
cpupower: Introduce ACPI CPPC library
cpupower: Add the function to get the sysfs value from specific table
cpupower: Initial AMD P-State capability
cpupower: Add the function to check AMD P-State enabled
cpupower: Add AMD P-State capability flag
To make the logs more readable such as for log likes:
ceph: will move 00000000a42b796b to split realm 100000003ed 000000007146df45
With this it will always show the inode numbers instead the inode
addresses.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This will reduce very possible but unnecessary frequently memory
allocate/free in this loop.
URL: https://tracker.ceph.com/issues/44100
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The global snaprealm would be created and then destroyed immediately
every time when updating it.
URL: https://tracker.ceph.com/issues/54362
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ceph have removed this macro and the 0x3 will be use for global dummy
snaprealm.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Xiubo has been doing stellar kernel work lately, and has graciously
volunteered to help with maintainer duties. Add him on as co-maintainer
in for ceph.ko and libceph.ko.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Use a list instead of recursion to avoid possible stack overflow.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
We will only track the uppest parent snapshot realm from which we
need to rebuild the snapshot contexts _downward_ in hierarchy. For
all the others having no new snapshot we will do nothing.
This fix will avoid calling ceph_queue_cap_snap() on some inodes
inappropriately. For example, with the code in mainline, suppose there
are 2 directory hierarchies (with 6 directories total), like this:
/dir_X1/dir_X2/dir_X3/
/dir_Y1/dir_Y2/dir_Y3/
Firstly, make a snapshot under /dir_X1/dir_X2/.snap/snap_X2, then make a
root snapshot under /.snap/root_snap. Every time we make snapshots under
/dir_Y1/..., the kclient will always try to rebuild the snap context for
snap_X2 realm and finally will always try to queue cap snaps for dir_Y2
and dir_Y3, which makes no sense.
That's because the snap_X2's seq is 2 and root_snap's seq is 3. So when
creating a new snapshot under /dir_Y1/... the new seq will be 4, and
the mds will send the kclient a snapshot backtrace in _downward_
order: seqs 4, 3.
When ceph_update_snap_trace() is called, it will always rebuild the from
the last realm, that's the root_snap. So later when rebuilding the snap
context, the current logic will always cause it to rebuild the snap_X2
realm and then try to queue cap snaps for all the inodes related in that
realm, even though it's not necessary.
This is accompanied by a lot of these sorts of dout messages:
"ceph: queue_cap_snap 00000000a42b796b nothing dirty|writing"
Fix the logic to avoid this situation.
Also, the 'invalidate' word is not precise here. In actuality, it will
cause a rebuild of the existing snapshot contexts or just build
non-existent ones. Rename it to 'rebuild_snapcs'.
URL: https://tracker.ceph.com/issues/44100
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This potentially will cause a bug in future if using an old ceph
version that sends a smaller inode struct, which can cause some members
to be skipped in handle_reply.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
There could be huge number of capsnaps around at any given time. On
x86_64 the structure is 248 bytes, which will be rounded up to 256 bytes
by kzalloc. Move this to a dedicated slabcache to save 8 bytes for each.
[ jlayton: use kmem_cache_zalloc ]
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Problem:
Some directory vxattrs (e.g. ceph.dir.pin.random) are governed by
information that isn't necessarily shared with the client. Add support
for the new GETVXATTR operation, which allows the client to query the
MDS directly for vxattrs.
When the client is queried for a vxattr that doesn't have a special
handler, have it issue a GETVXATTR to the MDS directly.
Solution:
Adds new getvxattr op to fetch ceph.dir.pin*, ceph.dir.layout* and
ceph.file.layout* vxattrs.
If the entire layout for a dir or a file is being set, then it is
expected that the layout be set in standard JSON format. Individual
field value retrieval is not wrapped in JSON. The JSON format also
applies while setting the vxattr if the entire layout is being set in
one go.
As a temporary measure, setting a vxattr can also be done in the old
format. The old format will be deprecated in the future.
URL: https://tracker.ceph.com/issues/51062
Signed-off-by: Milind Changire <mchangir@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
