During crng_init == 0, we never credit entropy in add_interrupt_
randomness(), but instead dump it directly into the primary_crng. That's
fine, except for the fact that we then wind up throwing away that
entropy later when we switch to extracting from the input pool and
xoring into (and later in this series overwriting) the primary_crng key.
The two other early init sites -- add_hwgenerator_randomness()'s use
crng_fast_load() and add_device_ randomness()'s use of crng_slow_load()
-- always additionally give their inputs to the input pool. But not
add_interrupt_randomness().
This commit fixes that shortcoming by calling mix_pool_bytes() after
crng_fast_load() in add_interrupt_randomness(). That's partially
verboten on PREEMPT_RT, where it implies taking spinlock_t from an IRQ
handler. But this also only happens during early boot and then never
again after that. Plus it's a trylock so it has the same considerations
as calling crng_fast_load(), which we're already using.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Suggested-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Remove the second 'on' and 'those'.
Signed-off-by: Tom Rix <trix@redhat.com>
[ rjw: Subject adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
UART drivers are meant to use the port spinlock within certain
methods, to protect against reentrancy. The sc16is7xx driver does
very little locking, presumably because when added it triggers
"scheduling while atomic" errors. This is due to the use of mutexes
within the regmap abstraction layer, and the mutex implementation's
habit of sleeping the current thread while waiting for access.
Unfortunately this lack of interlocking can lead to corruption of
outbound data, which occurs when the buffer used for I2C transmission
is used simultaneously by two threads - a work queue thread running
sc16is7xx_tx_proc, and an IRQ thread in sc16is7xx_port_irq, both
of which can call sc16is7xx_handle_tx.
An earlier patch added efr_lock, a mutex that controls access to the
EFR register. This mutex is already claimed in the IRQ handler, and
all that is required is to claim the same mutex in sc16is7xx_tx_proc.
See: https://github.com/raspberrypi/linux/issues/4885
Fixes: 6393ff1c44 ("sc16is7xx: Use threaded IRQ")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Link: https://lore.kernel.org/r/20220216160802.1026013-1-phil@raspberrypi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the current implementation the user may open a virtual tty which then
could fail to establish the underlying DLCI. The function gsmtty_open()
gets stuck in tty_port_block_til_ready() while waiting for a carrier rise.
This happens if the remote side fails to acknowledge the link establishment
request in time or completely. At some point gsm_dlci_close() is called
to abort the link establishment attempt. The function tries to inform the
associated virtual tty by performing a hangup. But the blocking loop within
tty_port_block_til_ready() is not informed about this event.
The patch proposed here fixes this by resetting the initialization state of
the virtual tty to ensure the loop exits and triggering it to make
tty_port_block_til_ready() return.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-7-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function gsm_process_modem() exists to handle modem status bits of
incoming frames. This includes incoming MSC (modem status command) frames
and convergence layer type 2 data frames. The function, however, was only
designed to handle MSC frames as it expects the command length. Within
gsm_dlci_data() it is wrongly assumed that this is the same as the data
frame length. This is only true if the data frame contains only 1 byte of
payload.
This patch names the length parameter of gsm_process_modem() in a generic
manner to reflect its association. It also corrects all calls to the
function to handle the variable number of modem status octets correctly in
both cases.
Fixes: 7263287af9 ("tty: n_gsm: Fixed logic to decode break signal from modem status")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-6-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tty flow control is handled via gsmtty_throttle() and gsmtty_unthrottle().
Both functions propagate the outgoing hardware flow control state to the
remote side via MSC (modem status command) frames. The local state is taken
from the RTS (ready to send) flag of the tty. However, RTS gets mapped to
DTR (data terminal ready), which is wrong.
This patch corrects this by mapping RTS to RTS.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-5-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The here fixed commit made the tty hangup asynchronous to avoid a circular
locking warning. I could not reproduce this warning. Furthermore, due to
the asynchronous hangup the function call now gets queued up while the
underlying tty is being freed. Depending on the timing this results in a
NULL pointer access in the global work queue scheduler. To be precise in
process_one_work(). Therefore, the previous commit made the issue worse
which it tried to fix.
This patch fixes this by falling back to the old behavior which uses a
blocking tty hangup call before freeing up the associated tty.
Fixes: 7030082a74 ("tty: n_gsm: avoid recursive locking with async port hangup")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-4-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trying to open a DLCI by sending a SABM frame may fail with a timeout.
The link is closed on the initiator side without informing the responder
about this event. The responder assumes the link is open after sending a
UA frame to answer the SABM frame. The link gets stuck in a half open
state.
This patch fixes this by initiating the proper link termination procedure
after link setup timeout instead of silently closing it down.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.2.1.2 describes the encoding of the
C/R (command/response) bit. Table 1 shows that the actual encoding of the
C/R bit is inverted if the associated frame is sent by the responder.
The referenced commit fixed here further broke the internal meaning of this
bit in the outgoing path by always setting the C/R bit regardless of the
frame type.
This patch fixes both by setting the C/R bit always consistently for
command (1) and response (0) frames and inverting it later for the
responder where necessary. The meaning of this bit in the debug output
is being preserved and shows the bit as if it was encoded by the initiator.
This reflects only the frame type rather than the encoded combination of
communication side and frame type.
Fixes: cc0f42122a ("tty: n_gsm: Modify CR,PF bit when config requester")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.7 describes the encoding of the
control signal octet used by the MSC (modem status command). The same
encoding is also used in convergence layer type 2 as described in chapter
5.5.2. Table 7 and 24 both require the DV (data valid) bit to be set 1 for
outgoing control signal octets sent by the DTE (data terminal equipment),
i.e. for the initiator side.
Currently, the DV bit is only set if CD (carrier detect) is on, regardless
of the side.
This patch fixes this behavior by setting the DV bit on the initiator side
unconditionally.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220218073123.2121-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 54da3e381c ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to
set up register mapping") fixed a bug that had, as a side-effect,
prevented the 8250_aspeed_vuart driver from enabling the VUART's
FIFOs. However, fixing that (and hence enabling the FIFOs) has in
turn revealed what appears to be a hardware bug in the ASPEED VUART in
which the host-side THRE bit doesn't get if the BMC-side receive FIFO
trigger level is set to anything but one byte. This causes problems
for polled-mode writes from the host -- for example, Linux kernel
console writes proceed at a glacial pace (less than 100 bytes per
second) because the write path waits for a 10ms timeout to expire
after every character instead of being able to continue on to the next
character upon seeing THRE asserted. (GRUB behaves similarly.)
As a workaround, introduce a new port type for the ASPEED VUART that's
identical to PORT_16550A as it had previously been using, but with
UART_FCR_R_TRIG_00 instead to set the receive FIFO trigger level to
one byte, which (experimentally) seems to avoid the problematic THRE
behavior.
Fixes: 54da3e381c ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to set up register mapping")
Tested-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20220211004203.14915-1-zev@bewilderbeest.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All supported platforms by this driver require ->setup() and ->exit().
Remove unneeded test for ->setup() presence.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220215101111.47250-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since PCI core provides a generic PCI_DEVICE_DATA() macro,
replace MID_DEVICE() with former one.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220215104126.7220-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add early console support which relies on the bootloader for the
initialization of the UART.
Please note, that the compatibles are taken from at91-usart MFD
driver.
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220217094620.1148571-1-michael@walle.cc
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Braces are not necessary for single statement blocks.
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marcelo Aloisio da Silva <marcelo.as@aol.com>
Link: https://lore.kernel.org/r/20220220174150.GA11496@snoopy
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a BIT(nr) macro available in vdso/bits.h
which is doing the same left shift operation
Example: (1 << 7) == BIT(7)
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com>
Link: https://lore.kernel.org/r/20220219183234.31216-1-mosescb.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following error reported by checkpatch.pl:
ERROR: that open brace { should be on the previous line
+ if (rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
+ {
Signed-off-by: Marcelo Aloisio da Silva <marcelo.as@aol.com>
Link: https://lore.kernel.org/r/20220220180434.GA12386@snoopy
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each case in ODM_CmnInfoUpdate() just sets a single variable. Set the
variables directly and remove ODM_CmnInfoUpdate().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220220100212.7466-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable pBandWidth in odm_dm_struct stores constants from enum
ht_channel_width. Change the type of pBandWidth from u8 pointer to
enum ht_channel_width pointer to get rid of a type cast in function
Update_ODM_ComInfo_88E().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220220100212.7466-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The enums odm_bw and ht_channel_width are redundant. Keep
ht_channel_width and remove odm_bw.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220220100212.7466-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variables bScanInProcess in struct mlme_priv and bpower_saving in
struct pwrctrl_priv are both unsed to store only boolean values true
and false. Convert them from u8 to bool to avoid type casts in the
function Update_ODM_ComInfo_88E().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220220100212.7466-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each case in ODM_CmnInfoHook() just sets a single variable. Set the
variables directly and remove ODM_CmnInfoHook().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220220100212.7466-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2 small fixes and 1 hardware-id addition.
The following is an automated git shortlog grouped by driver:
asus-wmi:
- Fix regression when probing for fan curve control
int3472:
- Add terminator to gpiod_lookup_table
thinkpad_acpi:
- Add dual-fan quirk for T15g (2nd gen)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmITtkkUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9zRxwf+NtDOL8JwOzxJQrQDJ+aj4h0VDbpz
EAAXg3JLLsiDC0kkgeOhIPG4NXEZ6VXgTi+BXz/FM5FZ8ikBTu/cu4EMXB8CnMAw
btDMCGrQldj7h1YQzIDecL2un+QQrnxINd0aVbM5PJSnxyScstpU7ZPlFQ5vvQT3
hNPLR1khSclVECX1VnYz504wX6+3wJdRED+7X92qh1/liLoFSqweUX/eRLovlz/6
By4r19Vy46ANkIXd1+prkrCHvE65KdECdB0YywI9Tt4Vb/FWJJXuXgXc4d9xUhy8
zcKL7QyYB//XfavaLukb+nupCM/CTC21KHlkpARVmTJlHT5dOe5XXN9v0A==
=ai9N
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Two small fixes and one hardware-id addition"
* tag 'platform-drivers-x86-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: int3472: Add terminator to gpiod_lookup_table
platform/x86: asus-wmi: Fix regression when probing for fan curve control
platform/x86: thinkpad_acpi: Add dual-fan quirk for T15g (2nd gen)
The RxMIMOSignalQuality array in struct signal_stat is set but
not used. Remove it.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220218093034.854049-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Should not use assignment in if condition.
Signed-off-by: Marcelo Aloisio da Silva <marcelo.as@aol.com>
Link: https://lore.kernel.org/r/20220218040140.GA22796@snoopy
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
unregister_netdev need to be called when register_netdev succeeds
qlge_health_create_reporters fails.
Fixes: d8827ae8e2 ("staging: qlge: deal with the case that devlink_health_reporter_create fails")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220221085552.93561-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
One error handler of wfx_init_common() return without calling
ieee80211_free_hw(hw), which may result in memory leak. And I add
one err label to unify the error handler, which is useful for the
subsequent changes.
Suggested-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_24A24A3EFF61206ECCC4B94B1C5C1454E108@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some variants of the WF200 disallow active scan on channel 12 and 13.
For these parts, the channels 12 and 13 are marked IEEE80211_CHAN_NO_IR.
However, the beacon hint procedure was removing the flag
IEEE80211_CHAN_NO_IR from channels where a BSS is discovered. This was
making subsequent scans to fail because the driver was trying active
scans on prohibited channels.
Signed-off-by: Riccardo Ferrazzo <rferrazzo@came.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20220218105358.283769-1-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since nvmem_unregister() checks for NULL, no need to repeat in
the caller. Drop duplicate NULL checks.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-14-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since nvmem_unregister() checks for NULL, no need to repeat in
the caller. Drop duplicate NULL checks.
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-13-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the example to reflect the new API. I have chosen the brcm-nvram
driver since it seems to be simpler than the qfprom driver.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-12-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 795ddd18d3 ("nvmem: core: remove regmap dependency"),
nvmem devices do not use the regmap API. Remove references to it from
the documentation.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-11-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the Security Fuse Processor found on Layerscape SoCs.
This driver implements basic read access.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Security Fuse Processor provides efuses and is responsible for
reading it at SoC startup and configuring it accordingly.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
D1 has a smaller eFuse block than some other recent SoCs, and it no
longer requires a workaround to read the eFuse data.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
D1 has a SID like other Allwinner SoCs, but with a unique eFuse layout.
Add a new compatible string for it.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nvmem_unregister() frees resources and standard pattern is to allow
caller to not care if it's NULL or not. This will reduce burden on
the callers to perform this check.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Slightly simplify the devm_nvmem_register() by using the
devm_add_action_or_reset().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are no users and seems no will come of the devm_nvmem_unregister().
Remove the function and remove the unused devm_nvmem_match() along with it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151527.17216-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wp-gpios property can be used on NVMEM nodes and the same property can
be also used on MTD NAND nodes. In case of the wp-gpios property is
defined at NAND level node, the GPIO management is done at NAND driver
level. Write protect is disabled when the driver is probed or resumed
and is enabled when the driver is released or suspended.
When no partitions are defined in the NAND DT node, then the NAND DT node
will be passed to NVMEM framework. If wp-gpios property is defined in
this node, the GPIO resource is taken twice and the NAND controller
driver fails to probe.
A new Boolean flag named ignore_wp has been added in nvmem_config.
In case ignore_wp is set, it means that the GPIO is handled by the
provider. Lets set this flag in MTD layer to avoid the conflict on
wp_gpios property.
Fixes: 2a127da461 ("nvmem: add support for the write-protect pin")
Cc: stable@vger.kernel.org
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151432.16605-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wp-gpios property can be used on NVMEM nodes and the same property can
be also used on MTD NAND nodes. In case of the wp-gpios property is
defined at NAND level node, the GPIO management is done at NAND driver
level. Write protect is disabled when the driver is probed or resumed
and is enabled when the driver is released or suspended.
When no partitions are defined in the NAND DT node, then the NAND DT node
will be passed to NVMEM framework. If wp-gpios property is defined in
this node, the GPIO resource is taken twice and the NAND controller
driver fails to probe.
It would be possible to set config->wp_gpio at MTD level before calling
nvmem_register function but NVMEM framework will toggle this GPIO on
each write when this GPIO should only be controlled at NAND level driver
to ensure that the Write Protect has not been enabled.
A way to fix this conflict is to add a new boolean flag in nvmem_config
named ignore_wp. In case ignore_wp is set, the GPIO resource will
be managed by the provider.
Fixes: 2a127da461 ("nvmem: add support for the write-protect pin")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220220151432.16605-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several drivers:
- Fix a failure to disable runtime in probe error paths. All cases
were introduced in the same rework patch.
adi,ad7124
- Fix incorrect register masking.
adi,ad74413r
- Avoid referencing negative array offsets.
- Use ngpio size when iterating over mask not numebr of channels.
- Fix issue with wrong mask uage getting GPIOs.
adi,admv1014
- Drop check on unsigned less than 0.
adi,ads16480
- Correctly handle devices that don't have burst mode support.
fsl,fxls8962af
- Add missing padding needed between address and data for SPI transfers.
men_z188
- Fix iomap leak in error path.
st,lsm6dsx
- Wait for setting time in oneshot reads to get a stable result.
ti,tsc2046
- Prevent an array overflow.
-----BEGIN PGP SIGNATURE-----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=FBdj
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
1st set of IIO fixes for the 5.17 cycle.
Several drivers:
- Fix a failure to disable runtime in probe error paths. All cases
were introduced in the same rework patch.
adi,ad7124
- Fix incorrect register masking.
adi,ad74413r
- Avoid referencing negative array offsets.
- Use ngpio size when iterating over mask not numebr of channels.
- Fix issue with wrong mask uage getting GPIOs.
adi,admv1014
- Drop check on unsigned less than 0.
adi,ads16480
- Correctly handle devices that don't have burst mode support.
fsl,fxls8962af
- Add missing padding needed between address and data for SPI transfers.
men_z188
- Fix iomap leak in error path.
st,lsm6dsx
- Wait for setting time in oneshot reads to get a stable result.
ti,tsc2046
- Prevent an array overflow.
* tag 'iio-fixes-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot
iio: Fix error handling for PM
iio: addac: ad74413r: correct comparator gpio getters mask usage
iio: addac: ad74413r: use ngpio size when iterating over mask
iio: addac: ad74413r: Do not reference negative array offsets
iio: adc: men_z188_adc: Fix a resource leak in an error handling path
iio: frequency: admv1013: remove the always true condition
iio: accel: fxls8962af: add padding to regmap for SPI
iio:imu:adis16480: fix buffering for devices with no burst mode
iio: adc: ad7124: fix mask used for setting AIN_BUFP & AIN_BUFM bits
iio: adc: tsc2046: fix memory corruption by preventing array overflow
