Replace kfree_skb() with kfree_skb_reason() in ip_rcv_finish_core(),
following drop reasons are introduced:
SKB_DROP_REASON_IP_RPFILTER
SKB_DROP_REASON_UNICAST_IN_L2_MULTICAST
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() with kfree_skb_reason() in ip_rcv_core(). Three new
drop reasons are introduced:
SKB_DROP_REASON_OTHERHOST
SKB_DROP_REASON_IP_CSUM
SKB_DROP_REASON_IP_INHDR
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace kfree_skb() with kfree_skb_reason() in nf_hook_slow() when
skb is dropped by reason of NF_DROP. Following new drop reasons
are introduced:
SKB_DROP_REASON_NETFILTER_DROP
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add document for following existing drop reasons:
SKB_DROP_REASON_NOT_SPECIFIED
SKB_DROP_REASON_NO_SOCKET
SKB_DROP_REASON_PKT_TOO_SMALL
SKB_DROP_REASON_TCP_CSUM
SKB_DROP_REASON_SOCKET_FILTER
SKB_DROP_REASON_UDP_CSUM
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Couple of main additions:
- Support for OPTEE based SCMI transport to enable using SCMI service
provided by OPTEE on some platforms
- Support for atomic SCMI transports which enables few SCMI transactions
to be completed in atomic context. This involves other refactoring work
associated with it. It also marks SMC and OPTEE as atomic transport as
the commands are completed once the return
Other changes involves some trace and log enhancements and a miscellaneous
bug fix.
-----BEGIN PGP SIGNATURE-----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=12H2
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into for-next/scmi
Arm SCMI firmware interface updates for v5.17
Couple of main additions:
- Support for OPTEE based SCMI transport to enable using SCMI service
provided by OPTEE on some platforms
- Support for atomic SCMI transports which enables few SCMI transactions
to be completed in atomic context. This involves other refactoring work
associated with it. It also marks SMC and OPTEE as atomic transport as
the commands are completed once the return
Other changes involves some trace and log enhancements and a miscellaneous
bug fix.
* tag 'scmi-updates-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add new parameter to mark_txdone
firmware: arm_scmi: Add atomic mode support to smc transport
firmware: arm_scmi: Add support for atomic transports
firmware: arm_scmi: Make optee support sync_cmds_completed_on_ret
firmware: arm_scmi: Make smc support sync_cmds_completed_on_ret
firmware: arm_scmi: Add sync_cmds_completed_on_ret transport flag
firmware: arm_scmi: Make smc transport use common completions
firmware: arm_scmi: Add configurable polling mode for transports
firmware: arm_scmi: Use new trace event scmi_xfer_response_wait
include: trace: Add new scmi_xfer_response_wait event
firmware: arm_scmi: Refactor message response path
firmware: arm_scmi: Set polling timeout to max_rx_timeout_ms
firmware: arm_scmi: Perform earlier cinfo lookup call in do_xfer
firmware: arm_scmi: optee: Drop the support for the OPTEE shared dynamic buffer
firmware: arm_scmi: optee: Fix missing mutex_init()
firmware: arm_scmi: Make virtio Version_1 compliance optional
firmware: arm_scmi: Add optee transport
dt-bindings: arm: Add OP-TEE transport for SCMI
firmware: arm_scmi: Review some virtio log messages
Those pins are used for SDIO on STM32MP135F-DK board.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
STM32MP13 embeds 2 instances of SDMMC peripheral.
Add the required information in SoC device tree file.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
On STM32MP13, the embedded SDMMC peripheral version is v2.2.
Update arm,primecell-periphid for SDMMC in the SoC DT file.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
SDMMC1/2 CK <= 50 MHz so slew-rate = <1>
A new node sdmmc1-clk-0 is added to manage the new clock pin slew-rate.
Signed-off-by: Gerald Baeza <gerald.baeza@foss.st.com>
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The max-frequency limitation is due to IOs.
On STM32MP13, it is 130MHz. Update the corresponding property.
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
To align with bootloaders device tree files, and thanks to what was
added in yaml file [1], the compatible property for sdmmc1 node is
updated with "st,stm32-sdmmc2" string.
[1] commit 552bc46484 ("dt-bindings: mmc: mmci: Add st,stm32-sdmmc2
compatible")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
To align with bootloaders device tree files, and thanks to what was
added in yaml file [1], the compatible property for sdmmc nodes is
updated with "st,stm32-sdmmc2" string.
[1] commit 552bc46484 ("dt-bindings: mmc: mmci: Add st,stm32-sdmmc2
compatible")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Modify function graph tracer to be handled directly by the standard
ftrace caller.
This is made possible as powerpc now supports
CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
This change simplifies the call of function graph ftrace.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/04d196585ff81bde06a000bd9c633a33a5b21130.1640017960.git.christophe.leroy@csgroup.eu
ftrace_enable_ftrace_graph_caller() and
ftrace_disable_ftrace_graph_caller() have common code.
They will have even more common code after following patch.
Refactor into a single ftrace_modify_ftrace_graph_caller() function.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f37785a531f1a8f201e1b3da45997a5c77e9d820.1640017960.git.christophe.leroy@csgroup.eu
Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS. It accelerates the call
of livepatching.
Also note that powerpc being the last one to convert to
CONFIG_DYNAMIC_FTRACE_WITH_ARGS, it will now be possible to remove
klp_arch_set_pc() on all architectures.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5831f711a778fcd6eb51eb5898f1faae4378b35b.1640017960.git.christophe.leroy@csgroup.eu
PPC64 needs some special logic to properly set up the TOC.
See commit 85baa09549 ("powerpc/livepatch: Add live patching support
on ppc64le") for details.
PPC32 doesn't have TOC so it doesn't need that logic, so adding
LIVEPATCH support is straight forward.
Add CONFIG_LIVEPATCH_64 and move livepatch stack logic into that item.
Livepatch sample modules all work.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/63cb094125b6a6038c65eeac2abaabbabe63addd.1640017960.git.christophe.leroy@csgroup.eu
Livepatching a loaded module involves applying relocations through
apply_relocate_add(), which attempts to write to read-only memory when
CONFIG_STRICT_MODULE_RWX=y.
R_PPC_ADDR16_LO, R_PPC_ADDR16_HI, R_PPC_ADDR16_HA and R_PPC_REL24 are
the types generated by the kpatch-build userspace tool or klp-convert
kernel tree observed applying a relocation to a post-init module.
Use patch_instruction() to patch those relocations.
Commit 8734b41b3e ("powerpc/module_64: Fix livepatching for
RO modules") did similar change in module_64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d5697157cb7dba3927e19aa17c915a83bc550bb2.1640017960.git.christophe.leroy@csgroup.eu
The SocFPGA machine since commit b3ca9888f3 ("reset: socfpga: add an
early reset driver for SoCFPGA") uses reset controller, so it should
select RESET_CONTROLLER explicitly. Selecting ARCH_HAS_RESET_CONTROLLER
is not enough because it affects only default choice still allowing a
non-buildable configuration:
/usr/bin/arm-linux-gnueabi-ld: arch/arm/mach-socfpga/socfpga.o: in function `socfpga_init_irq':
arch/arm/mach-socfpga/socfpga.c:56: undefined reference to `socfpga_reset_init'
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Fixes: b3ca9888f3 ("reset: socfpga: add an early reset driver for SoCFPGA")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The stm32mp15xxaa-pinctrl.dtsi included in stm32mp15xx-dhcom-som.dtsi
already sets status = "okay" in gpioc: gpio@50004000 node, drop the
duplicate from stm32mp15xx-dhcom-som.dtsi . No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This patch presents the DT patches for the emtrion GmbH
Argon board series. They are available with STM32MP157
from STMicroelectronics with 512 MByte Memory.
The devicetree stm32mp157c-emstamp-argon.dtsi is the common part
providing the module components and the basic support for the SoC.
The support for the emSBC-Argon baseboard in the developer-kit
configuration is provided by the stm32mp157c-emsbc-argon.dts file.
Signed-off-by: Reinhold Mueller <reinhold.mueller@emtrion.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This patch presents the yaml patch for the emtrion GmbH
Argon board series.
Signed-off-by: Reinhold Mueller <reinhold.mueller@emtrion.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The "allwinner,sun8i-h3-ths" thermal sensor has 0 argument cells, but
the consumer has an argument cell. It is ignored by the code, but the
error was found with some upcoming schema validation changes. The schema
and code both agree that 0 cells is correct.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220204002802.1214602-1-robh@kernel.org
On TGL/RKL the BIOS likes to use some kind of bogus DBUF layout
that doesn't match what the spec recommends. With a single active
pipe that is not going to be a problem, but with multiple pipes
active skl_commit_modeset_enables() goes into an infinite loop
since it can't figure out any order in which it can commit the
pipes without causing DBUF overlaps between the planes.
We'd need some kind of extra DBUF defrag stage in between to
make the transition possible. But that is clearly way too complex
a solution, so in the name of simplicity let's just sanitize the
DBUF state by simply turning off all planes when we detect a
pipe encroaching on its neighbours' DBUF slices. We only have
to disable the primary planes as all other planes should have
already been disabled (if they somehow were enabled) by
earlier sanitization steps.
And for good measure let's also sanitize in case the DBUF
allocations of the pipes already seem to overlap each other.
Cc: <stable@vger.kernel.org> # v5.14+
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4762
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
During readout we cannot assume the planes are actually using the
slices they are supposed to use. The BIOS may have misprogrammed
things and put the planes onto the wrong dbuf slices. So let's
do the readout more carefully to make sure we really know which
dbuf slices are actually in use by the pipe at the time.
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reintroduce the !join_mbus single pipe cases for adlp+.
Due to the mbus relative dbuf offsets in PLANE_BUF_CFG we
need to know the actual slices used by the pipe when doing
readout, even when mbus joining isn't enabled. Accurate
readout will be needed to properly sanitize invalid BIOS
dbuf configurations.
This will also make it much easier to play around with the
!join_mbus configs for testin/workaround purposes.
Cc: <stable@vger.kernel.org> # v5.14+
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220204141818.1900-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
The csi1 block node was mistakenly added before the gic node, although
its address comes after the gic's. Move the node to its correct
position.
Fixes: 90e048101f ("ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node")
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220205185429.2278860-2-paul.kocialkowski@bootlin.com
Remove the following warnings seen when building with W=1.
Warning (unique_unit_address): /soc/timer@40000c00: duplicate unit-address
(also used in node /soc/timers@40000c00)
This approach is based on some discussions[1], to restructure the dtsi
and dts files.
Timer5 is enabled by default on stm32f4 series, to act as clockevent. In
order to get rid of the W=1 warning, and be compliant with dt-schemas
(e.g. dtbs_check):
- In stm32f429.dtsi:
. Keep the more complete timers5 description
. Remove the most simple timer5 node that is duplicate
- In each board:
. adopt "st,stm32-timer" compatible for timers5, also add the interrupt
. use /delete-property/ and /delete-node/ so the it matches the
clockevent bindings
Note: all this is done in one shot (e.g. not split) to keep clockevent
functionality.
[1] https://lore.kernel.org/linux-arm-kernel/Yaf4jiZIp8+ndaXs@robh.at.kernel.org/
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Several unused "timer" are duplicate nodes of "timers" nodes.
There are two dt-schemas:
- timer/st,stm32-timer.yaml: A timer is needed on STM32F4 series, on all
boards, to act as clockevent.
- mfd/st,stm32-timers.yaml: Timers can be used for other purpose.
By default, timer5 is left enabled to be used as clockevent. Remove all
other timer clockevent nodes that are currently unused and duplicated.
This removes several messages: Warning (unique_unit_address): /soc/timer@..
duplicate unit-address (also used in node /soc/timers@...)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Allthough kernel text is always mapped with BATs, we still have
inittext mapped with pages, so TLB miss handling is required
when CONFIG_DEBUG_PAGEALLOC or CONFIG_KFENCE is set.
The final solution should be to set a BAT that also maps inittext
but that BAT then needs to be cleared at end of init, and it will
require more changes to be able to do it properly.
As DEBUG_PAGEALLOC or KFENCE are debugging, performance is not a big
deal so let's fix it simply for now to enable easy stable application.
Fixes: 035b19a15a ("powerpc/32s: Always map kernel text and rodata with BATs")
Cc: stable@vger.kernel.org # v5.11+
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/aea33b4813a26bdb9378b5f273f00bd5d4abe240.1638857364.git.christophe.leroy@csgroup.eu
In some cases, a single SerDes instance can be shared between two different
processors, each using a separate link. In these cases, the SerDes
configuration is done in an earlier boot stage. Therefore, add support to
skip reconfiguring, if it is was already configured beforehand.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220128072642.29188-1-a-govindraju@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes for bunch of drivers:
- clk params for dphy
- arg fix for mtk-tphy
- refcount leak fix for stm32
- bus width fix for zynqmp
- sentinel fix ti
- PHY_BRCM_USB Kconfig fix
- clk fix for usb phy
-----BEGIN PGP SIGNATURE-----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=Av3W
-----END PGP SIGNATURE-----
Merge tag 'phy-fixes-5.17' into next
Merge phy fixes for 5.17 into next branch to resolve the conflict
between fixes and next for upcoming patches
