sh_eth_{suspend|resume}() initialize their local variable 'ret' to 0 but
this value is never really used, thus we can kill those intializers...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/f09d7c64-4a2b-6973-09a4-10d759ed0df4@omp.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By profiling, discovered that ena device driver allocates skb by
build_skb() and frees by napi_skb_cache_put(). Because the driver
does not use napi skb cache in allocation path, napi skb cache is
periodically filled and flushed. This is waste of napi skb cache.
As ena_alloc_skb() is called only in napi, Use napi_build_skb()
and napi_alloc_skb() when allocating skb.
This patch was tested on aws a1.metal instance.
[ jwiedmann.dev@gmail.com: Use napi_alloc_skb() instead of
netdev_alloc_skb_ip_align() to keep things consistent. ]
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/YfUAkA9BhyOJRT4B@ip-172-31-19-208.ap-northeast-1.compute.internal
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.
Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event.
Fixes: 3cf3227a21 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change qed_mcp_cmd() to use msleep() (by setting QED_MB_FLAG_CAN_SLEEP
flag) and add new nosleep() version of the api. These api are used to
issue cmds to management fw and the change affects how driver
behaves while waiting for a response/resource.
All sleepable callers of the existing api now use msleep() version. For
non-sleepable callers, the new nosleep() version is explicitly used.
Signed-off-by: Venkata Sudheer Kumar Bhavaraju <vbhavaraju@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220131005235.1647881-1-vbhavaraju@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are
located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump
gmac4 DMA registers correctly, this commit checks if a net_device has
gmac4 and uses different logic to dump its DMA registers.
This fixes the following KASAN warning, which can normally be triggered
by a command similar like "ethtool -d eth0":
BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr ffffffc010177100 by task ethtool/1839
kasan_report+0x200/0x21c
__asan_report_store4_noabort+0x34/0x60
dwmac4_dump_dma_regs+0x6d4/0xb30
stmmac_ethtool_gregs+0x110/0x204
ethtool_get_regs+0x200/0x4b0
dev_ethtool+0x1dac/0x3800
dev_ioctl+0x7c0/0xb50
sock_ioctl+0x298/0x6c4
...
Fixes: fbf68229ff ("net: stmmac: unify registers dumps methods")
Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to
properly control MT7530 and MT7531 switch PHYs.
A noticeable change is that the behaviour of switchport interfaces going
up-down-up-down is no longer there.
Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220129062703.595-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The OnePlus 6 and 6T feature a BQ27411 fuel gauge for reading the
battery stats. Enable it and add a simple battery to document the
battery specs of each device.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220120184546.499030-1-caleb@connolly.tech
This is needed due changes in commit 0519d1d0bf ("clk: qcom:
gcc-msm8994: Modernize the driver"), which removed struct
clk_fixed_factor. Preparation for next commit for enabling SD/eMMC.
Inspired by 2c2f64ae36.
This is required for both msm8994-huawei-angler (sdhc1 will be enabled
in next commit) and msm8992-lg-bullhead (where actually fixes sdhc1
- tested on bullhead rev 1.01).
Fixes: 0519d1d0bf ("clk: qcom: gcc-msm8994: Modernize the driver")
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220113233358.17972-4-petr.vorel@gmail.com
This change updates/corrects below cpuidle parameters
1. entry-latency, exit-latency and residency for various idle states.
2. arm,psci-suspend-param which is same for CLUSTER_SLEEP_0/1 states.
3. Add CLUSTER_SLEEP_1 in CLUSTER_PD.
Cc: devicetree@vger.kernel.org
Fixes: 5188049c9b ("arm64: dts: qcom: Add base SM8450 DTSI")
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
[bjorn: Split domain-idle-states, per Ulf's request]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1641749107-31979-5-git-send-email-quic_mkshah@quicinc.com
On IPQ8074, 4MB of memory is needed for TZ. So mark that region
as reserved.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
[bjorn: Squash with existing reserved-memory node]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1641560078-860-1-git-send-email-quic_kathirav@quicinc.com
Block at <ff800400 0x4c> is a TWD that contains timers, watchdog and
reset. Actual timers happen to be at block beginning but they only span
across the first 0x28 registers. It means the old block description was
incorrect (size 0x3c).
Drop timers binding for now and use documented TWD binding. Timers
should be properly documented and defined as TWD subnode.
Fixes: 2961f69f15 ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes dtbs_check warnings like:
dma@310000: $nodename:0: 'dma@310000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
This patch fixes the kernel warning
"cacheinfo: Unable to detect cache hierarchy for CPU 0"
for the bcm2837 on newer kernel versions.
Signed-off-by: Richard Schleich <rs@noreya.tech>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
[florian: Align and remove comments matching property values]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Define the Realtek RTL8365MB switch without interrupt support on the device
tree of Asus RT-AC88U.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
IPQ8074 uses SMEM like other modern QCA SoC-s, so since its already
supported by the kernel add the required DT nodes.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220106212512.1970828-1-robimarko@gmail.com
This reverts commit c23f1b7735.
The SM6125_VDDCX constant was replaced with 0 temporarily as the header
patch defining this constant resided in a different branch, creating an
unwanted dependency of the dts branch on the drivers branch.
Now (by the time this patch will be applied) that both branches have
been merged upstream, it is safe to revert to the constant again.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211229220117.293542-1-marijn.suijten@somainline.org
Follow common pattern for this device, first specific
and then generic compatible.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211227215238.113956-1-david@ixit.cz
dt-schema expect to have fallback compatible, which is now in-place.
Fixes warning generated by `make qcom/sdm845-oneplus-fajita.dtb`:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: power-controller@c300000: compatible: ['qcom,sdm845-aoss-qmp'] is too short
From schema: Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Komu: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211220211443.106754-1-david@ixit.cz
QCOM BAM parses property `qcom,controlled-remotely` as a boolean,
adjust dts to reflect that.
Discovered while converting text documentation into yaml format.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211220145526.49102-1-david@ixit.cz
The msm8998 cache nodes have some issues. First, L1 caches are described
within cpu nodes, not as separate nodes. The 'next-level-cache' property
is of course in the correct location, otherwise the cache hierarchy
walking would not work. Remove all the L1 cache nodes.
Second, 'arm,arch-cache' is not a documented compatible string. "cache"
is a sufficient compatible string for the Arm architected caches.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211217211136.3536443-1-robh@kernel.org
Since commit d0a6ce59ea ("arm64: dts: qcom: sm8150: Add support for
SONY Xperia 1 / 5 (Kumano platform)"), we can directly refer to pwrkey
and resin by their new labels, respectively pon_pwrkey and pon_resin.
Simplify microsof surface duo DTS by utilizing the new labels.
Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211217124546.1192281-1-balbi@kernel.org
By listing relevant DMA channels for the various QUPv3 instances, we
can work on adding support for DMA to the respective drivers.
Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211216124348.370059-1-balbi@kernel.org
Pure effort to avoid `make dtbs_check` warnings about memory@ nodes, which
should have property device_type set to memory.
Fixes warnings as:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: memory@f5b00000: 'device_type' is a required property
From schema: dtschema/schemas/memory.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214234648.23369-1-david@ixit.cz
Replace (unused) enable-gpio binding with schema-defined wake-gpios. The
GPIO line is still unused, but at least we'd follow the defined schema.
While we are at it, change perst-gpio property to follow the preferred
naming schema (perst-gpios).
Fixes: 13e948a36d ("arm64: dts: qcom: sm8250: Commonize PCIe pins")
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214231448.2044987-1-dmitry.baryshkov@linaro.org
qcom,apq8016-sbc-sndcard is now covered by the qcom,sm8250.yaml schema
which has slightly different recommendations for the naming of
properties and nodes. The old naming is still functional but
deprecated. Update the &sound node in apq8016-sbc to fix the following
dtbs_check warnings:
apq8016-sbc.dt.yaml: sound@7702000: 'model' is a required property
From schema: sound/qcom,sm8250.yaml
apq8016-sbc.dt.yaml: sound@7702000: 'external-dai-link@0', ...
do not match any of the regexes: '.*-dai-link$', ...
From schema: sound/qcom,sm8250.yaml
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214135124.2380-1-stephan@gerhold.net
Rename thermal zones according to dt-schema.
Fixes multiple `make dtbs_check` warnings about name convetion.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214132750.69782-1-david@ixit.cz
Since 'qcom,apr-domain' is deprecated in favor of 'qcom,domain',
update accordingly.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211214102451.29084-1-david@ixit.cz
replace millivolt with correct microvolt and adjust value to
the minimal value allowed by documentation.
Found with `make qcom/sdm845-oneplus-fajita.dtb`.
Fixes:
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-microvolt' is a required property
From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias2-microvolt' is a required property
From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias3-microvolt' is a required property
From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias4-microvolt' is a required property
From schema: Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: codec@1: 'qcom,micbias1-millivolt', 'qcom,micbias2-millivolt', 'qcom,micbias3-millivolt', 'qcom,micbias4-millivolt' do not match any of the regexes: '^.*@[0-9a-f]+$', 'pinctrl-[0-9]+'
Fixes: 27ca1de07d ("arm64: dts: qcom: sdm845: add slimbus nodes")
Signed-off-by: David Heidelberg <david@ixit.cz>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211213195105.114596-1-david@ixit.cz
It is not recommended to place regulator nodes inside simple-bus,
so move it out in order to fix the warnings generated by
dtschema/schemas/simple-bus.yaml schema.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220108202558.82044-1-david@ixit.cz
