The driver can be premature in detecting stalled firmware
when the heartbeat is not updated because the firmware can
occasionally take a long time (more than 2 seconds) to service
a request, and doesn't update the heartbeat during that time.
The firmware heartbeat is not necessarily a steady 1 second
periodic beat, but better described as something that should
progress at least once in every DECVMD_TIMEOUT period.
The single-threaded design in the FW means that if a devcmd
or adminq request launches a large internal job, it is stuck
waiting for that job to finish before it can get back to
updating the heartbeat. Since all requests are "guaranteed"
to finish within the DEVCMD_TIMEOUT period, the driver needs
to less aggressive in checking the heartbeat progress.
We change our current 2 second window to something bigger than
DEVCMD_TIMEOUT which should take care of most of the issue.
We stop checking for the heartbeat while waiting for a request,
as long as we're still watching for the FW status. Lastly,
we make sure our FW status is up to date before running a
devcmd request.
Once we do this, we need to not check the heartbeat on DEV
commands because it may be stalled while we're on the fw_down
path. Instead, we can rely on the is_fw_running check.
Fixes: b2b9a8d7ed ("ionic: avoid races in ionic_heartbeat_check")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The dbid_inuse bitmap is not useful in this driver so remove it.
Fixes: 6461b446f2 ("ionic: Add interrupts and doorbells")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the driver is going through reset, it will eventually call
ionic_lif_init(), which does a lot of re-initialization. One
of the re-initialization steps is to setup the adminq and
enable napi for it. If something breaks after this point
we can end up with a kernel NULL pointer dereference through
ionic_adminq_napi.
Fix this by making sure to call napi_disable() in the cleanup
path of ionic_lif_init(). This forces any pending napi contexts
to finish and prevents them from being recalled before deleting
the napi context.
Fixes: 77ceb68e29 ("ionic: Add notifyq support")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Buffer DMA mapping happens in ionic_tx_map_skb() and this function is
called from ionic_tx() and ionic_tx_tso(). If ionic_tx_map_skb()
succeeds, but a failure is encountered later in ionic_tx() or
ionic_tx_tso() we aren't unmapping the buffers. This can be fixed in
ionic_tx() by changing functions it calls to return void because they
always return 0. For ionic_tx_tso(), there's an actual possibility that
we leave the buffers mapped, so fix this by introducing the helper
function ionic_tx_desc_unmap_bufs(). This function is also re-used
in ionic_tx_clean().
Fixes: 0f3154e6bc ("ionic: Add Tx and Rx handling")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when a request for add/deleting a filter is made when
ionic_heartbeat_check() returns failure the driver will be overly
verbose about failures, especially when these are usually temporary
fails and the request will be retried later. An example of this is
a filter add when the FW is in the middle of resetting:
IONIC_CMD_RX_FILTER_ADD (31) failed: IONIC_RC_ERROR (-6)
rx_filter add failed: ADDR 01:80:c2:00:00:0e
Fix this by checking for -ENXIO and other error values on filter
request fails before printing the error message. Add similar
checking to the delete filter code.
Fixes: f91958cc96 ("ionic: tame the filter no space message")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when an administrator configures a VF via ndo_set_vf*,
the driver will send the set command to FW and then update the
cached value. The cached value is then used when reporting
VF info via ndo_get_vf_config.
A problem is that the VF info may have been updated between
the last ndo_set_vf* and ndo_get_vf_info commands via some
other method, i.e. a VF changes its MAC address (assuming it's
allowed to do so) and since this is all managed by the FW,
this new value won't be reflected in the PF's cache of values.
To fix this, update the driver to always get the latest VF
information by making use of the IONIC_CMD_VF_GETATTR dev
command. The FW may not support getting all the attributes for
IONIC_CMD_VF_GETATTR, so the driver will only update the cached
VF config members if their associated IONIC_CMD_VF_GETATTR
was successful. Otherwise the cached VF config members will
remain the same as what was set in ndo_set_vf*.
Fixes: fbb39807e9 ("ionic: support sr-iov operations")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
When dev commands fail, an error message will always be printed,
which may be overly alarming the to system administrators,
especially if the driver shouldn't be printing the error due
to some unsupported capability.
Similar to recent adminq request changes, we can update the
dev command interface with the ability to selectively print
error messages to allow the driver to prevent printing errors
that are expected.
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent changes went into the driver to allow flexibility when
printing error messages. Unfortunately this had the unexpected
consequence of printing confusing messages like the following:
IONIC_CMD_RX_FILTER_ADD (31) failed: IONIC_RC_SUCCESS (-6)
In cases like this the completion of the admin queue command never
completes, so the completion status is 0, hence IONIC_RC_SUCCESS
is printed even though the command clearly failed. For example,
this could happen when the driver tries to add a filter and at
the same time the FW goes through a reset, so the AQ command
never completes.
Fix this by forcing the FW completion status to IONIC_RC_ERROR
in cases where we never get the completion.
Fixes: 8c9d956ab6 ("ionic: allow adminq requests to override default error message")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure we print the TIMEOUT string if we had a timeout
error, rather than printing the wrong status.
Fixes: 8c9d956ab6 ("ionic: allow adminq requests to override default error message")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
When IONIC_EVENT_RESET is received, we only need to start the
fw_down process if we aren't already down, and we need to be
sure to set the FW_STOPPING state on the way.
If this is how we noticed that FW was stopped, it is most
likely from a FW update, and we'll see a new FW generation.
The update happens quickly enough that we might not see
fw_status==0, so we need to be sure things get restarted when
we see the fw_generation change.
Fixes: d2662072c0 ("ionic: monitor fw status generation")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Between fw running and fw actually stopped into reset, we need
a fw_stopping concept to catch and block some actions while
we're transitioning to FW_RESET state. This will help to be
sure the fw_up task is not scheduled until after the fw_down
task has completed.
On some rare occasion timing, it is possible for the fw_up task
to try to run before the fw_down task, then not get run after
the fw_down task has run, leaving the device in a down state.
This is possible if the watchdog goes off in between finding the
down transition and starting the fw_down task, where the later
watchdog sees the FW is back up and schedules a fw_up task.
Fixes: c672412f61 ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
It's possible the FW is already shutting down while the driver is being
removed and/or when the driver is going through reset. This can cause
unexpected/unnecessary errors to be printed:
eth0: DEV_CMD IONIC_CMD_PORT_RESET (12) error, IONIC_RC_ERROR (29) failed
eth1: DEV_CMD IONIC_CMD_RESET (3) error, IONIC_RC_ERROR (29) failed
Fix this by checking the FW status register before issuing the reset
commands.
Also, since err may not be assigned in ionic_port_reset(), assign it a
default value of 0, and remove an unnecessary log message.
Fixes: fbfb803153 ("ionic: Add hardware init and device commands")
Signed-off-by: Brett Creeley <brett@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull the watchdog init code out to a separate bite-sized
function. Code cleaning for now, will be a useful change in
the near future.
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The watchdog expects the lif to fully exist when it goes off,
so lets not start the watchdog until all is ready in case there
is some quirky time dialation that makes probe take multiple
seconds.
Fixes: 089406bc5a ("ionic: add a watchdog timer to monitor heartbeat")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sparse seems to have gotten a little more picky lately and
we need to revisit this bit of code to make sparse happy.
warning: incorrect type in initializer (different address spaces)
expected union ionic_dev_cmd_regs *regs
got union ionic_dev_cmd_regs [noderef] __iomem *dev_cmd_regs
warning: incorrect type in argument 2 (different address spaces)
expected void [noderef] __iomem *
got unsigned int *
warning: incorrect type in argument 1 (different address spaces)
expected void volatile [noderef] __iomem *
got union ionic_dev_cmd *
Fixes: d701ec326a ("ionic: clean up sparse complaints")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use kvzalloc()/kvfree() instead of hand coded functions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Recent changes made netdev->dev_addr const, and it's passed
directly to mpc52xx_fec_set_paddr().
Similar problem exists on the probe patch, the driver needs
to call eth_hw_addr_set().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: adeef3e321 ("net: constify netdev->dev_addr")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Per VESA DisplayID Standard v2.0: Type VII Timing – Detailed Timing Data
Definitions were already provided as type I, but not used
Signed-off-by: Yaroslav Bolyukin <iam@lach.pw>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220123191955.57994-1-iam@lach.pw
The cpsw driver didn't properly initialise the struct page_pool_params
before calling page_pool_create(), which leads to crashes after the struct
has been expanded with new parameters.
The second Fixes tag below is where the buggy code was introduced, but
because the code was moved around this patch will only apply on top of the
commit in the first Fixes tag.
Fixes: c5013ac1dd ("net: ethernet: ti: cpsw: move set of common functions in cpsw_priv")
Fixes: 9ed4050c0d ("net: ethernet: ti: cpsw: add XDP support")
Reported-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Colin Foster <colin.foster@in-advantage.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ym needs to be free when ym->cmd != SIOCYAMSMCS.
Fixes: 0781168e23 ("yam: fix a missing-check bug")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, on EEE capable platforms, if EEE SW timer is used, the SW
timer cause 1 wakeup/s even if the TX has successfully entered EEE.
Remove this unnecessary wakeup by only calling mod_timer() if we
haven't successfully entered EEE.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since IPv4 routes support IPv6 gateways now, we can route IPv4 traffic in
NBMA tunnels.
Signed-off-by: Qing Deng <i@moy.cat>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-4-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-3-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't currently validate that the values being set are within the range
we advertised to userspace as being valid, do so and reject any values
that are out of range.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220124153253.3548853-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from conor.dooley@microchip.com <conor.dooley@microchip.com>
Conor Dooley <conor.dooley@microchip.com>:
From: Conor Dooley <conor.dooley@microchip.com>
This series updates the Microchip Icicle Kit device tree by adding a
host of peripherals, and some updates to the memory map. In addition,
the device tree has been split into a third part, which contains "soft"
peripherals that are in the fpga fabric.
Several of the entries are for peripherals that have not get had their
drivers upstreamed, so in those cases the dt bindings are included where
appropriate in order to avoid the many "DT compatible string <x> appears
un-documented" errors.
Depends on mpfs clock driver series [1] to provide:
dt-bindings/clock/microchip,mpfs-clock.h
and on the other changes to the icicle/mpfs device tree from geert
that are already in linux/riscv/for-next.
Additionally, the interrupt-extended warnings on the plic/clint are
cleared by [2] & [3].
[1] https://lore.kernel.org/linux-clk/20211216140022.16146-1-conor.dooley@microchip.com/T/
[2] https://lore.kernel.org/linux-riscv/cover.1639744468.git.geert@linux-m68k.org/
[3] https://lore.kernel.org/linux-riscv/cover.1639744106.git.geert@linux-m68k.org/
Changes from v3:
- drop "mailbox: change mailbox-mpfs compatible string", already upstream:
commit f10b1fc016
- fix copy paste error in microchip,mpfs-mailbox dt-binding
- remove whitespace in syscontroller dt entry
Changes from v2:
- dropped plic int header & corresponding defines in dts{,i}
- use $ref to drmode in mpfs-musb binding
- split changes to dts{,i} again: functional changes to existing
elements now are in a new patch
- drop num-cs property in mpfs-spi binding
- dont make the system controller a simple-mfd
- move the separate bindings for rng/generic system services into the
system controller binding
- added an instance corei2c as i2c2 in the fabric dtsi
- add version numbering to corepwm and corei2c compat string (-rtl-vN)
Conor Dooley (14):
dt-bindings: soc/microchip: update syscontroller compatibles
dt-bindings: soc/microchip: add services as children of sys ctrlr
dt-bindings: i2c: add bindings for microchip mpfs i2c
dt-bindings: rtc: add bindings for microchip mpfs rtc
dt-bindings: gpio: add bindings for microchip mpfs gpio
dt-bindings: spi: add bindings for microchip mpfs spi
dt-bindings: usb: add bindings for microchip mpfs musb
dt-bindings: pwm: add microchip corepwm binding
riscv: dts: microchip: use clk defines for icicle kit
riscv: dts: microchip: add fpga fabric section to icicle kit
riscv: dts: microchip: refactor icicle kit device tree
riscv: dts: microchip: update peripherals in icicle kit device tree
riscv: dts: microchip: add new peripherals to icicle kit device tree
MAINTAINERS: update riscv/microchip entry
.../bindings/gpio/microchip,mpfs-gpio.yaml | 80 ++++++
.../bindings/i2c/microchip,mpfs-i2c.yaml | 55 ++++
...ilbox.yaml => microchip,mpfs-mailbox.yaml} | 6 +-
.../bindings/pwm/microchip,corepwm.yaml | 75 +++++
.../bindings/rtc/microchip,mfps-rtc.yaml | 63 +++++
.../microchip,mpfs-sys-controller.yaml | 73 +++++
...icrochip,polarfire-soc-sys-controller.yaml | 35 ---
.../bindings/spi/microchip,mpfs-spi.yaml | 52 ++++
.../bindings/usb/microchip,mpfs-musb.yaml | 59 ++++
MAINTAINERS | 2 +
.../dts/microchip/microchip-mpfs-fabric.dtsi | 25 ++
.../microchip/microchip-mpfs-icicle-kit.dts | 115 ++++++--
.../boot/dts/microchip/microchip-mpfs.dtsi | 262 +++++++++++++++---
arch/riscv/configs/icicle_kit_defconfig | 134 +++++++++
14 files changed, 932 insertions(+), 104 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml
create mode 100644 Documentation/devicetree/bindings/i2c/microchip,mpfs-i2c.yaml
rename Documentation/devicetree/bindings/mailbox/{microchip,polarfire-soc-mailbox.yaml => microchip,mpfs-mailbox.yaml} (82%)
create mode 100644 Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml
create mode 100644 Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml
create mode 100644 Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml
delete mode 100644 Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml
create mode 100644 Documentation/devicetree/bindings/spi/microchip,mpfs-spi.yaml
create mode 100644 Documentation/devicetree/bindings/usb/microchip,mpfs-musb.yaml
create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi
create mode 100644 arch/riscv/configs/icicle_kit_defconfig
--
2.32.0
Merge series from guochun.mao@mediatek.com <guochun.mao@mediatek.com>:
These patches is mainly for adding mt8186 support.
The spi nor controller of mt8186 has some differences,
it needs one more clk, axi_s, for dma feature.
And also needs one extra dummy bit when read flash registers.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Add support for platforms without amplifier (headset codec only) and
without Intel graphics.
Merge series from Daniel Beer <daniel.beer@igorinstitute.com>:
This pair of patches implements support for the TAS5805M class D audio
amplifier. This driver, and the example configuration in the device-tree
file, were originally based on a 4.19 series kernel and have been
modified slightly from the tested version.
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Add system suspend and resume handlers so that the cs42l42 is cleanly
put into power-off state during system suspend and the registers are
restored in resume.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Make sure the device version is taken into account when selecting a
machine driver, in addition to device manufacturer and part_id, and
simplify code with a macro.
Merge series from Ariel D'Alessandro <ariel.dalessandro@collabora.com>:
Sound cards may allow using different main clock inputs. In the generic
fsl-asoc-card driver, these values are hardcoded for each specific card
configuration. Let's make it more flexible, allowing setting mclk-id
from the device-tree node.
The problem is that "erasesize" is a uint64_t type so it might be
non-zero but the lower 32 bits are zero so when it's truncated,
"(uint32_t)erasesize", then that value is zero. This leads to a
divide by zero bug.
Avoid the bug by delaying the divide until after we have validated
that "erasesize" is non-zero and within the uint32_t range.
Fixes: dc2b3e5cbc ("mtd: phram: use div_u64_rem to stop overwrite len in phram_setup")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220121115505.GI1978@kadam
We need to select MEMORY as well otherwise OMAP_GPMC will not be built.
For simplicity let's select MEMORY and OMAP_GPMC unconditionally as
this driver depends on OMAP_GPMC driver and uses symbols from there.
Fixes: dbcb124ace ("mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220118123525.8020-1-rogerq@kernel.org
Mtdpart doesn't free pparts when a cleanup function is declared.
Add missing free for pparts in cleanup function for smem to fix the
leak.
Fixes: 10f3b4d799 ("mtd: parsers: qcom: Fix leaking of partition name")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220116032211.9728-2-ansuelsmth@gmail.com
In the event of a skipped partition (case when the entry name is empty)
the kernel panics in the cleanup function as the name entry is NULL.
Rework the parser logic by first checking the real partition number and
then allocate the space and set the data for the valid partitions.
The logic was also fundamentally wrong as with a skipped partition, the
parts number returned was incorrect by not decreasing it for the skipped
partitions.
Fixes: 803eb124e1 ("mtd: parsers: Add Qcom SMEM parser")
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220116032211.9728-1-ansuelsmth@gmail.com
Its possible for the main smem driver to not be loaded by the time we come
along to parse the smem partition description but, this is a perfectly
normal thing.
No need to print out an error message in this case.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220103030316.58301-3-bryan.odonoghue@linaro.org
Interacting with a NAND chip on an IPQ6018 I found that the qcomsmem NAND
partition parser was returning -EPROBE_DEFER waiting for the main smem
driver to load.
This caused the board to reset. Playing about with the probe() function
shows that the problem lies in the core clock being switched off before the
nandc_unalloc() routine has completed.
If we look at how qcom_nandc_remove() tears down allocated resources we see
the expected order is
qcom_nandc_unalloc(nandc);
clk_disable_unprepare(nandc->aon_clk);
clk_disable_unprepare(nandc->core_clk);
dma_unmap_resource(&pdev->dev, nandc->base_dma, resource_size(res),
DMA_BIDIRECTIONAL, 0);
Tweaking probe() to both bring up and tear-down in that order removes the
reset if we end up deferring elsewhere.
Fixes: c76b78d8ec ("mtd: nand: Qualcomm NAND controller driver")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220103030316.58301-2-bryan.odonoghue@linaro.org
If of_find_device_by_node() succeeds, ingenic_ecc_get() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling.
Fixes: 15de8c6efd ("mtd: rawnand: ingenic: Separate top-level and SoC specific code")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211230072751.21622-1-linmq006@gmail.com
Even if this is no yaml yet at least fix the example to be compliant to
later schema as e.g. found in gpio-pca95xx.yaml, fairchild,74hc595.yaml
and gpio/fsl-imx-gpio.yaml.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
In order to support the YUV output, we'll need the atomic state to know
what is the state of the associated property in the CSC setup callback.
Let's change the prototype of that callback to allow us to access it.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-11-maxime@cerno.tech
The current CSC setup code for the BCM2711 uses a sequence of register
writes to configure the CSC depending on whether we output using a full
or limited range.
However, with the upcoming introduction of the YUV output, we're going
to add new matrices to perform the conversions, so we should switch to
something a bit more flexible that takes the matrix as an argument and
programs the CSC accordingly.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-10-maxime@cerno.tech
On the BCM2711, the HDMI_VEC_INTERFACE_XBAR register configuration
depends on whether we're using an RGB or YUV output. Let's move that
configuration to the CSC setup.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-8-maxime@cerno.tech
The CSC callbacks takes a boolean as an argument to tell whether we're
using the full range or limited range RGB.
However, with the upcoming YUV support, the logic will be a bit more
complex. In order to address this, let's make the callbacks take the
entire mode, and call our new helper to tell whether the full or limited
range RGB should be used.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-7-maxime@cerno.tech
We're going to need to tell whether we want to run with a full or
limited range RGB output in multiple places in the code, so let's create
a helper that will return whether we need with full range or not.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-6-maxime@cerno.tech
The current code assumes that the RGB444 and YUV444 formats are the
same, but the HDMI 2.0 specification states that:
The three DC_XXbit bits above only indicate support for RGB 4:4:4 at
that pixel size. Support for YCBCR 4:4:4 in Deep Color modes is
indicated with the DC_Y444 bit. If DC_Y444 is set, then YCBCR 4:4:4
is supported for all modes indicated by the DC_XXbit flags.
So if we have YUV444 support and any DC_XXbit flag set but the DC_Y444
flag isn't, we'll assume that we support that deep colour mode for
YUV444 which breaks the specification.
In order to fix this, let's split the edid_hdmi_dc_modes field in struct
drm_display_info into two fields, one for RGB444 and one for YUV444.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d0c94692e0 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-4-maxime@cerno.tech
The current code, when parsing the EDID Deep Color depths, that the
YUV422 cannot be used, referring to the HDMI 1.3 Specification.
This specification, in its section 6.2.4, indeed states:
For each supported Deep Color mode, RGB 4:4:4 shall be supported and
optionally YCBCR 4:4:4 may be supported.
YCBCR 4:2:2 is not permitted for any Deep Color mode.
This indeed can be interpreted like the code does, but the HDMI 1.4
specification further clarifies that statement in its section 6.2.4:
For each supported Deep Color mode, RGB 4:4:4 shall be supported and
optionally YCBCR 4:4:4 may be supported.
YCBCR 4:2:2 is also 36-bit mode but does not require the further use
of the Deep Color modes described in section 6.5.2 and 6.5.3.
This means that, even though YUV422 can be used with 12 bit per color,
it shouldn't be treated as a deep color mode.
This is also broken with YUV444 if it's supported by the display, but
DRM_EDID_HDMI_DC_Y444 isn't set. In such a case, the code will clear
color_formats of the YUV444 support set previously in
drm_parse_cea_ext(), but will not set it back.
Since the formats supported are already setup properly in
drm_parse_cea_ext(), let's just remove the code modifying the formats in
drm_parse_hdmi_deep_color_info()
Fixes: d0c94692e0 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-3-maxime@cerno.tech
The drm_hdmi_avi_infoframe_colorspace() function actually sets the
colorimetry and extended_colorimetry fields in the hdmi_avi_infoframe
structure with DRM_MODE_COLORIMETRY_* values.
To make things worse, the hdmi_avi_infoframe structure also has a
colorspace field used to signal whether an RGB or YUV output is being
used.
Let's remove the inconsistency and allow for the colorspace usage by
renaming the function.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-2-maxime@cerno.tech
