The SOF driver removed the support for INFO_RESUME in the commit
"ASoC: SOF: pcm: do not add SNDRV_PCM_INFO_RESUME to runtime hw info".
And resuming is handled by the ALSA core with the .prepare and
.trigger_start stages. So, remove handling of RESUME trigger in the
HDA DAI BE trigger op.
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216231628.344687-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SOF driver removed the support for INFO_RESUME in the commit
"ASoC: SOF: pcm: do not add SNDRV_PCM_INFO_RESUME to runtime hw info".
And resuming is handled by the ALSA core with the .prepare and
.trigger_start stages. So, remove handling of RESUME trigger in the
component driver trigger op.
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211216231628.344687-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix UAF in set catch-all element, from Eric Dumazet.
2) Fix MAC mangling for multicast/loopback traffic in nfnetlink_queue
and nfnetlink_log, from Ignacy Gawędzki.
3) Remove expired entries from ctnetlink dump path regardless the tuple
direction, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In DMA mode we were not considering the force_8bit flag.
Fix it by using regular non-DMA 8-bit I/O if force_8bit flag is set.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211209090458.24830-6-rogerq@kernel.org
AM64 SoC contains the GPMC NAND controller. Add compatible for it.
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211209090458.24830-2-rogerq@kernel.org
The double 'as' in a comment is repeated, thus it should be removed.
Signed-off-by: Xiang wangx <wangxiang@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unneeded variable used to store return value.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
The wait_for_connected() function doesn't modify "*port1" and there is
no need to pass a pointer. Just pass the int itself.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211210142028.GB18906@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here's a fix for a reported problem in the cp210x gpio-registration code
and some more modem device ids.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYbxXXwAKCRALxc3C7H1l
CPNXAP9Hnq8QjObNmWmZw81TRpCZJgglKoOoNtNT8MhC/A/ThwD9E7EXq1LS0pmm
th7tA25gUtpg4T1w3lW2ILVdl7RDKAc=
=tHPt
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-5.16-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for 5.16-rc6
Here's a fix for a reported problem in the cp210x gpio-registration code
and some more modem device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.16-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Telit FN990 compositions
USB: serial: cp210x: fix CP2105 GPIO registration
- Fix printk() usage during recursion (Ard Biesheuvel)
- Fix rodata section to actually have contents (Christophe Leroy)
- Add notes about lkdtm_kernel_info usage (Kees Cook)
- Avoid stack-entropy selftest when LKDTM is disabled (Misono Tomohiro)
-----BEGIN PGP SIGNATURE-----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=JLZP
-----END PGP SIGNATURE-----
Merge tag 'lkdtm-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next
Kees writes:
lkdtm updates for v5.17-rc1
- Fix printk() usage during recursion (Ard Biesheuvel)
- Fix rodata section to actually have contents (Christophe Leroy)
- Add notes about lkdtm_kernel_info usage (Kees Cook)
- Avoid stack-entropy selftest when LKDTM is disabled (Misono Tomohiro)
* tag 'lkdtm-v5.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftest/lkdtm: Skip stack-entropy test if lkdtm is not available
lkdtm: Fix content of section containing lkdtm_rodata_do_nothing()
lkdtm: avoid printk() in recursive_loop()
lkdtm: Note that lkdtm_kernel_info should be removed in the future
Remove dma_to_buf_pfn function, which is not used in the codebase.
This was pointed by clang with the following warning:
'dma_to_mm_pfn' [-Wunused-function]
static inline unsigned long dma_to_mm_pfn(unsigned long dma_pfn)
^
https://lore.kernel.org/r/YYhY7GqlrcTZlzuA@fedora
drivers/iommu/intel/iommu.c:136:29: warning: unused function
Signed-off-by: Maíra Canal <maira.canal@usp.br>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20211217083817.1745419-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu->intcapxt_notify field is no longer used
after a switch to a separate domain was done
Fixes: d1adcfbb52 ("iommu/amd: Fix IOMMU interrupt generation in X2APIC mode")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20211123161038.48009-6-mlevitsk@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Use IRQCHIP_MASK_ON_SUSPEND to make the core irq code to
mask the iommu interrupt on suspend and unmask it on the resume.
Since now the unmask function updates the INTX settings,
that will restore them on resume from s3/s4.
Since IRQCHIP_MASK_ON_SUSPEND is only effective for interrupts
which are not wakeup sources, remove IRQCHIP_SKIP_SET_WAKE flag
and instead implement a dummy .irq_set_wake which doesn't allow
the interrupt to become a wakeup source.
Fixes: 6692981295 ("iommu/amd: Add support for X2APIC IOMMU interrupts")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20211123161038.48009-5-mlevitsk@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This is more logically correct and will also allow us to
to use mask/unmask logic to restore INTX setttings after
the resume from s3/s4.
Fixes: 6692981295 ("iommu/amd: Add support for X2APIC IOMMU interrupts")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20211123161038.48009-4-mlevitsk@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This will give IOMMU GA log a chance to work after resume
from s3/s4.
Fixes: 8bda0cfbdc ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20211123161038.48009-2-mlevitsk@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
It really is a property of the IOVA rcache code that we need to alloc a
power-of-2 size, so relocate the functionality to resize into
alloc_iova_fast(), rather than the callsites.
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/1638875846-23993-1-git-send-email-john.garry@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The find.h APIs are designed to be used only on unsigned long arguments.
This can technically result in a over-read, but it is harmless in this
case. Regardless, fix it to avoid the warning seen under -Warray-bounds,
which we'd like to enable globally:
In file included from ./include/linux/bitmap.h:9,
from drivers/iommu/intel/iommu.c:17:
drivers/iommu/intel/iommu.c: In function 'domain_context_mapping_one':
./include/linux/find.h:119:37: warning: array subscript 'long unsigned int[0]' is partly outside array bounds of 'int[1]' [-Warray-bounds]
119 | unsigned long val = *addr & GENMASK(size - 1, 0);
| ^~~~~
drivers/iommu/intel/iommu.c:2115:18: note: while referencing 'max_pde'
2115 | int pds, max_pde;
| ^~~~~~~
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20211215232432.2069605-1-keescook@chromium.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
- Revert evtq and priq back to their former sizes
- Return early on short-descriptor page-table allocation failure
- Fix page fault reporting for Adreno GPU on SMMUv2
- Make SMMUv3 MMU notifier ops 'const'
- Numerous new compatible strings for Qualcomm SMMUv2 implementations
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmG5yfQQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNJwAB/9aXmGPSJWKqvFq+uu5qlsoD5Ld16YSFTUF
uP1DCVKRtZnxVyWZtzETktOhwg3Cfxv30VLtwXULoSF18MFAkQHeoYnzTiswyMc5
BNV5R4z2GtNkQ5OEpk4I2I5CH+7pxKs+lKIi+ylvJLIKX629/OGRcw9+bVtCA5GF
QYr/536VRlnuwV+pzbv04PnZ27LCed9VAQNBYWxbwHyrOj8ent+h8MMDLaZvZs0z
Gyq8v1RxNmjx8pS4h3kMU5VZv01Dnfpb/M6CbdV/pEGW47EJoIr7DveyIfNTKdX9
+IOBKWfVdWLG/nEUMoBC0N2FqGPqzRhHL0K3DCeUUnXsTTtUM1cp
=gsAY
-----END PGP SIGNATURE-----
Merge tag 'arm-smmu-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into arm/smmu
Arm SMMU updates for 5.17
- Revert evtq and priq back to their former sizes
- Return early on short-descriptor page-table allocation failure
- Fix page fault reporting for Adreno GPU on SMMUv2
- Make SMMUv3 MMU notifier ops 'const'
- Numerous new compatible strings for Qualcomm SMMUv2 implementations
Add MODULE_ALIAS_FS() to load the module automatically when you do "mount
-t zonefs".
Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Cc: stable <stable@vger.kernel.org> # 5.6+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
xfrm ineterface does not allow xfrm if_id = 0
fail to create or update xfrm state and policy.
With this commit:
ip xfrm policy add src 192.0.2.1 dst 192.0.2.2 dir out if_id 0
RTNETLINK answers: Invalid argument
ip xfrm state add src 192.0.2.1 dst 192.0.2.2 proto esp spi 1 \
reqid 1 mode tunnel aead 'rfc4106(gcm(aes))' \
0x1111111111111111111111111111111111111111 96 if_id 0
RTNETLINK answers: Invalid argument
v1->v2 change:
- add Fixes: tag
Fixes: 9f8550e4bd ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm interface if_id = 0 would cause xfrm policy lookup errors since
Commit 9f8550e4bd.
Now explicitly fail to create an xfrm interface when if_id = 0
With this commit:
ip link add ipsec0 type xfrm dev lo if_id 0
Error: if_id must be non zero.
v1->v2 change:
- add Fixes: tag
Fixes: 9f8550e4bd ("xfrm: fix disable_xfrm sysctl when used on xfrm interfaces")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
1. Add support for MT8192
2. CMDQ refinement.
3. Miscellaneous clean up and reorder.
4. Set the default value of rotation to DRM_MODE_ROTATE_0
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=2VjD
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.17' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next for Linux 5.16
1. Add support for MT8192
2. CMDQ refinement.
3. Miscellaneous clean up and reorder.
4. Set the default value of rotation to DRM_MODE_ROTATE_0
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1639700370-3541-1-git-send-email-chunkuang.hu@kernel.org
If the hardware reports the 'CQ' overflow or 'CQE' error by the abnormal
interrupt, disable the queue and stop tasks send to hardware.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the hardware reports the event queue overflow by the abnormal interrupt,
the driver needs to reset the function and re-enable the event queue
interrupt and abnormal interrupt.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The abnormal interrupt method needs to be changed, and the changed method
needs to be locked in order to maintain atomicity. Therefore,
replace request_irq() with request_threaded_irq().
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After processing an interrupt event and the interrupt function is
enabled by writing the QM_DOORBELL_CMD_AEQ register, the hardware
may generate new interrupt events due to processing other user's task
when the subsequent interrupt events have not been processed. The new
interrupt event will disrupt the current normal processing flow and
cause other problems.
Therefore, the operation of writing the QM_DOORBELL_CMD_AEQ doorbell
register needs to be placed after all interrupt events processing
are completed.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch does not change any code, just code movement. Preparing for
next patch.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The internal memory of the device needs to be reset only when
the device is globally initialized. Other scenarios, such as
function reset, do not need to perform reset.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When remove the driver and executing the task occur at the same time,
the following deadlock will be triggered:
Chain exists of:
sva_lock --> uacce_mutex --> &qm->qps_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&qm->qps_lock);
lock(uacce_mutex);
lock(&qm->qps_lock);
lock(sva_lock);
And the lock 'qps_lock' is used to protect qp. Therefore, it's reasonable
cycle is to continue until the qp memory is released. So move the release
lock infront of 'uacce_remove'.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For Kunpeng 920, the bit 0 of register 'HZIP_SGL_RUSER_32_63' stand for
whether the ssid is valid. So this bit should be set as valid for sva mode.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
hpre_curve25519_src_init() allocates memory for 'ptr' before calling
memcmp(). If memcmp() returns 0, the function will return '-EINVAL'
without freeing memory.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.
Replace kernel.h inclusion with the list of what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use 2-factor multiplication argument form kcalloc() instead
of kzalloc().
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use 2-factor multiplication argument form kcalloc() instead
of kzalloc().
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add new module parameter to allow users to use SEV_INIT_EX instead of
SEV_INIT. This helps users who lock their SPI bus to use the PSP for SEV
functionality. The 'init_ex_path' parameter defaults to NULL which means
the kernel will use SEV_INIT, if a path is specified SEV_INIT_EX will be
used with the data found at the path. On certain PSP commands this
file is written to as the PSP updates the NV memory region. Depending on
file system initialization this file open may fail during module init
but the CCP driver for SEV already has sufficient retries for platform
initialization. During normal operation of PSP system and SEV commands
if the PSP has not been initialized it is at run time. If the file at
'init_ex_path' does not exist the PSP will not be initialized. The user
must create the file prior to use with 32Kb of 0xFFs per spec.
Signed-off-by: David Rientjes <rientjes@google.com>
Co-developed-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Peter Gonda <pgonda@google.com>
Reviewed-by: Marc Orr <marcorr@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Marc Orr <marcorr@google.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: David Rientjes <rientjes@google.com>
Cc: John Allen <john.allen@amd.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
