We should be doing the HE capabilities lookup based on the full
interface type so if P2P doesn't have HE but client has it doesn't
get confused. Fix that.
Fixes: 2ab4587675 ("mac80211: add support for the ADDBA extension element")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211129152938.010fc1d61137.If3a468145f29d670cb00a693bed559d8290ba693@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The function cfg80211_reg_can_beacon_relax() expects wiphy
mutex to be held when it is being called. However, when
reg_leave_invalid_chans() is called the mutex is not held.
Fix it by acquiring the lock before calling the function.
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211202152831.527686cda037.I40ad9372a47cbad53b4aae7b5a6ccc0dc3fddf8b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we call ieee80211_agg_start_txq(), that will in turn call
schedule_and_wake_txq(). Called from ieee80211_stop_tx_ba_cb()
this is done under sta->lock, which leads to certain circular
lock dependencies, as reported by Chris Murphy:
https://lore.kernel.org/r/CAJCQCtSXJ5qA4bqSPY=oLRMbv-irihVvP7A2uGutEbXQVkoNaw@mail.gmail.com
In general, ieee80211_agg_start_txq() is usually not called
with sta->lock held, only in this one place. But it's always
called with sta->ampdu_mlme.mtx held, and that's therefore
clearly sufficient.
Change ieee80211_stop_tx_ba_cb() to also call it without the
sta->lock held, by factoring it out of ieee80211_remove_tid_tx()
(which is only called in this one place).
This breaks the locking chain and makes it less likely that
we'll have similar locking chain problems in the future.
Fixes: ba8c3d6f16 ("mac80211: add an intermediate software queue implementation")
Reported-by: Chris Murphy <lists@colorremedies.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211202152554.f519884c8784.I555fef8e67d93fff3d9a304886c4a9f8b322e591@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This removes the previously unused reload flag, which was introduced in
1eda919126.
The request is handled as NL80211_REGDOM_SET_BY_CORE, which is parsed
unconditionally.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Fixes: 1eda919126 ("nl80211: reset regdom when reloading regdb")
Link: https://lore.kernel.org/all/YaZuKYM5bfWe2Urn@archlinux-ax161/
Signed-off-by: Finn Behrens <me@kloenk.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/YadvTolO8rQcNCd/@gimli.kloenk.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sending them out on a different queue can cause a race condition where a
number of packets in the queue may be discarded by the receiver, because
the ADDBA request is sent too early.
This affects any driver with software A-MPDU setup which does not allocate
packet seqno in hardware on tx, regardless of whether iTXQ is used or not.
The only driver I've seen that explicitly deals with this issue internally
is mwl8k.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20211202124533.80388-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Record DAX on virtiofs and the semantic difference with that on ext4
and xfs.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When the per inode DAX hint changes while the file is still *opened*, it
is quite complicated and maybe fragile to dynamically change the DAX
state.
Hence mark the inode and corresponding dentries as DONE_CACHE once the
per inode DAX hint changes, so that the inode instance will be evicted
and freed as soon as possible once the file is closed and the last
reference to the inode is put. And then when the file gets reopened next
time, the new instantiated inode will reflect the new DAX state.
In summary, when the per inode DAX hint changes for an *opened* file, the
DAX state of the file won't be updated until this file is closed and
reopened later.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Among the FUSE_INIT phase, client shall advertise per inode DAX if it's
mounted with "dax=inode". Then server is aware that client is in per
inode DAX mode, and will construct per-inode DAX attribute accordingly.
Server shall also advertise support for per inode DAX. If server doesn't
support it while client is mounted with "dax=inode", client will
silently fallback to "dax=never" since "dax=inode" is advisory only.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
DAX may be limited in some specific situation. When the number of usable
DAX windows is under watermark, the recalim routine will be triggered to
reclaim some DAX windows. It may have a negative impact on the
performance, since some processes may need to wait for DAX windows to be
recalimed and reused then. To mitigate the performance degradation, the
overall DAX window need to be expanded larger.
However, simply expanding the DAX window may not be a good deal in some
scenario. To maintain one DAX window chunk (i.e., 2MB in size), 32KB
(512 * 64 bytes) memory footprint will be consumed for page descriptors
inside guest, which is greater than the memory footprint if it uses
guest page cache when DAX disabled. Thus it'd better disable DAX for
those files smaller than 32KB, to reduce the demand for DAX window and
thus avoid the unworthy memory overhead.
Per inode DAX feature is introduced to address this issue, by offering a
finer grained control for dax to users, trying to achieve a balance
between performance and memory overhead.
The FUSE_ATTR_DAX flag in FUSE_LOOKUP reply is used to indicate whether
DAX should be enabled or not for corresponding file. Currently the state
whether DAX is enabled or not for the file is initialized only when
inode is instantiated.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Expand the fuse protocol to support per inode DAX.
FUSE_HAS_INODE_DAX flag is added indicating if fuse server/client
supporting per inode DAX. It can be conveyed in both FUSE_INIT request and
reply.
FUSE_ATTR_DAX flag is added indicating if DAX shall be enabled for
corresponding file. It is conveyed in FUSE_LOOKUP reply.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We add 'always', 'never', and 'inode' (default). '-o dax' continues to
operate the same which is equivalent to 'always'.
The following behavior is consistent with that on ext4/xfs:
- The default behavior (when neither '-o dax' nor
'-o dax=always|never|inode' option is specified) is equal to 'inode'
mode, while 'dax=inode' won't be printed among the mount option list.
- The 'inode' mode is only advisory. It will silently fallback to 'never'
mode if fuse server doesn't support that.
Also noted that by the time of this commit, 'inode' mode is actually equal
to 'always' mode, before the per inode DAX flag is introduced in the
following patch.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is in prep for following per inode DAX checking.
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently, the table that stores information about the connected hidraw
devices has a mutex to prevent concurrent hidraw users to manipulate the
hidraw table (e.g. delete an entry) while someone is trying to use
the table (e.g. issuing an ioctl to the device), preventing the kernel
to referencing a NULL pointer. However, since that every user that wants
to access the table for both manipulating it and reading it content,
this prevents concurrent access to the table for read-only operations
for different or the same device (e.g. two hidraw ioctls can't happen at
the same time, even if they are completely unrelated).
This proves to be a bottleneck and gives performance issues when using
multiple HID devices at same time, like VR kits where one can have two
controllers, the headset and some tracking sensors.
To improve the performance, replace the table mutex with a read-write
semaphore, enabling multiple threads to issue parallel syscalls to
multiple devices at the same time while protecting the table for
concurrent modifications.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211130132957.8480-2-andrealmeid@collabora.com
Fix the following coccicheck REVIEW:
Use swap() instead of reimplementing it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: chiminghao <chi.minghao@zte.com.cn>
[bentiss: rewrote commit title]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211109082610.131341-1-chi.minghao@zte.com.cn
Adds a new "alc285-hp-amp-init" model that can be used to apply the ALC285
HP speaker amplifier initialization fixup to devices that are not already
known by passing "hda_model=alc285-hp-amp-init" to the
snd-sof-intel-hda-common module or "model=alc285-hp-amp-init" to the
snd-hda-intel module, depending on which is being used.
Signed-off-by: Bradley Scott <bscott@teksavvy.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211213162246.506838-1-bscott@teksavvy.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP ZBook 15 G6 (SSID 103c:860f) needs the same speaker amplifier
initialization as used on several other HP laptops using ALC285.
Signed-off-by: Bradley Scott <Bradley.Scott@zebra.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211213154938.503201-1-Bradley.Scott@zebra.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This extends the previous sanitychecking of device memory to read/write
all the memory on the device during the device probe, ala memtest86,
as an optional module parameter: i915.memtest=1. This is not expected to
be fast, but a reasonably thorough verfification that the device memory
is accessible and doesn't return bit errors.
v2: Rebased.
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208153404.27546-4-ramalingam.c@intel.com
As we setup the memory regions for the device, give each a quick test to
verify that we can read and write to the full iomem range. This ensures
that our physical addressing for the device's memory is correct, and
some reassurance that the memory is functional.
v2: wrapper for memtest [Chris]
v3: Removed the unused ptr i915 [Chris]
v4: used the %pa for the resource_size_t.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211209162620.5218-1-ramalingam.c@intel.com
Remove the portion of stolen memory reserved for private use from driver
access.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208153404.27546-2-ramalingam.c@intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmG2fU0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGC7EH/3R7Rt+OD8Wn8Ss3
w8V+dBxVwa2u2oMTyUHPxaeOXZ7bi38XlUdLFPOK/76bGwO0a5TmYZqsWdRbGyT0
HfcYjHsQ0lbJXk/nh2oM47oJxJXVpThIHXJEk0FZ0Y5t+DYjIYlNHzqZymUyhLem
St74zgWcyT+MXuqY34vB827FJDUnOxhhhi85tObeunaSPAomy9aiYidSC1ARREnz
iz2VUntP/QnRnKVvL2nUZNzcz1xL5vfCRSKsRGRSv3qW1Y/1M71ylt6JVmSftWq+
VmMdFxFhdrb1OK/1ct/930Un/UP2NG9EJsWxote2XYlnVSZHzDqH7lUhbqgdCcLz
1m2tVNY=
=7wRd
-----END PGP SIGNATURE-----
Merge v5.16-rc5 into drm-next
Thomas Zimmermann requested a fixes backmerge, specifically also for
96c5f82ef0 ("drm/vc4: fix error code in vc4_create_object()")
Just a bunch of adjacent changes conflicts, even the big pile of them
in vc4.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Variable 'overflow' set but not used, but this is the intended behavior.
The hardware only updates the counter register after the overflow
register read. However, the value of overflow is not actually needed.
Link: https://lore.kernel.org/lkml/202111200402.afQsussU-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Link: https://lore.kernel.org/r/20211123192524.1038304-1-dfustini@baylibre.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Adds the new PMGR driver. This includes the driver only; DT and
MAINTAINERS changes are part of the DT pull.
Minor change from v3: added `depends on PM` to the Kconfig to
fix COMPILE_TEST randconfig failures.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSU7I7lUkZru3Mt15+lhN6SrnTN2AUCYa7f+wAKCRClhN6SrnTN
2Bk7AP42vfTQXHQVxtCnvivhc6m+P4z6sULPTqOWN4oPPcudSQEAkAjUeC2IFdQ3
4XovFzUZb7R8E7in7OpYxXyVAK5/eQY=
=xoPm
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lrwu
-----END PGP SIGNATURE-----
Merge tag 'asahi-soc-pmgr-5.17' of https://github.com/AsahiLinux/linux into arm/drivers
Apple SoC PMGR driver for 5.17
Adds the new PMGR driver. This includes the driver only; DT and
MAINTAINERS changes are part of the DT pull.
Minor change from v3: added `depends on PM` to the Kconfig to
fix COMPILE_TEST randconfig failures.
* tag 'asahi-soc-pmgr-5.17' of https://github.com/AsahiLinux/linux:
soc: apple: Add driver for Apple PMGR power state controls
Link: https://lore.kernel.org/r/049f4de9-51be-7be4-1f9a-a59756af88d7@marcan.st
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The syctr interrupt could set the affinity to any cores in the
SoC. However, the default affinity is set to cpu 0.
This timer will be used as broadcast timer on all the i.MX
SoCs. Because DYNIRQ flag is set, the core time framework will runtime
set the interrupt affinity to the cores that needs to wake up and the
cpumask will runtime set to the core that will be wake up. So even the
sysctr initialization use cpumask 0, there is no issue, the current
patch is just use cpu_possible_mask to show the fact that the timer
supports routed to all the cpu cores and nothing else.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20211201125030.2307746-2-peng.fan@oss.nxp.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Variable delay is being assigned to zero and the code falls through to
the next case in a switch statement that returns out of the function.
The variable is never read in this scenario and so the assignment is
redundant and can be removed.
Cleans up scan-build static analysis warning:
drivers/phy/rockchip/phy-rockchip-inno-usb2.c:753:3: warning: Value
stored to 'delay' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20211211180054.525368-1-colin.i.king@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
smatch warning:
drivers/gpu/drm/i915/display/intel_dmc.c:601 parse_dmc_fw() warn:
unsigned 'fw->size - offset' is never less than zero
Firmware size is size_t and offset is u32. So the subtraction is
unsigned which can never be less than zero.
Fixes: 3d5928a168 ("drm/i915/xelpd: Pipe A DMC plugging")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210044129.12422-1-harshit.m.mogalapalli@oracle.com
(cherry picked from commit 87bb2a410d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add USI defined usages to the HID debug code.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-6-tero.kristo@linux.intel.com
This function is not called outside of hid-input.c so we can make it
static.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-5-tero.kristo@linux.intel.com
This and HID_DG_STYLUS are pretty much the same thing so add suffix for
HID_DG_PEN too. This makes the input device name look better.
While doing this, remove the suffix override from hid-multitouch, as it
is now handled by hid-input. Also, the suffix override done by
hid-multitouch was wrong, as it mapped HID_DG_PEN => "Stylus" and
HID_DG_STYLUS => "Pen".
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
[bentiss: amended to keep the same name for hid-multitouch devices]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-3-tero.kristo@linux.intel.com
Since we are going to have more MSC events too, add map_msc() that can
be used to fill in necessary fields and avoid boilerplate code.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-2-tero.kristo@linux.intel.com
of_find_compatible_node() takes a reference to the device_node
which needs to be dropped when done.
Signed-off-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The double `Address' in the comment in line 487 is repeated. Remove one
of them from the comment.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The double `if' in the comment in line 144 is repeated. Remove one
of them from the comment.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The double `the' in the comment in line 344 is repeated. Remove one
of them from the comment.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 13ceb48bc1 ("MIPS: Loongson2ef: Remove unnecessary
{as,cc}-option calls"), no need to use "ifdef need-compiler" for
Kbuild.platforms, because the cause of the build issue mentioned
in commit 0706f74f71 ("MIPS: fix *-pkg builds for loongson2ef
platform") has been disappeared, so just remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
According to Documentation/process/changes.rst, the minimal version of GCC
is 5.1, and -mr10k-cache-barrier=store is supported with GCC 5.1 [1], just
remove the unnecessary check to fix the build error [2]:
arch/mips/sgi-ip22/Platform:28: *** gcc doesn't support needed option -mr10k-cache-barrier=store. Stop.
[1] https://gcc.gnu.org/onlinedocs/gcc-5.1.0/gcc/MIPS-Options.html
[2] https://github.com/ClangBuiltLinux/linux/issues/1543
Reported-by: Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove the set_speed function and allow the driver to figure out the
speed at which needs to configure the serdes based on the interface type.
Fixes: 305524902a ("phy: Add lan966x ethernet serdes PHY driver")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20211211214717.1284306-1-horatiu.vultur@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
intel_device_info.h references struct pci_dev but does not ensure that
the struct has been declared, causing build failures if something in
other headers changes so that the implicit dependency it is relying on
is no longer satisfied:
In file included from drivers/gpu/drm/i915/intel_device_info.h:32,
from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.h:11,
from drivers/gpu/drm/i915/gt/uc/intel_uc_fw.c:11:
drivers/gpu/drm/i915/display/intel_display.h:643:39: error: 'struct pci_dev' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
643 | bool intel_modeset_probe_defer(struct pci_dev *pdev);
| ^~~~~~~
cc1: all warnings being treated as errors
Add a declaration of the struct to fix this.
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes: 94b541f53d ("drm/i915: Add intel_modeset_probe_defer() helper")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211213170753.3680209-1-broonie@kernel.org
The 'pm-ignore-notify' property is not a valid property and there is
no documentation for it.
Drop such invalid property.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i.MX8ULP use scmi firmware based power domain and sensor support.
So add the firmware node and the sram it uses.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The SW1C regulator powers the VPU and the state isn't guaranteed
to always be on. Link the VPU power-domain to the regulator to
ensure it is turned on before using the power domain.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This property could fix the defect that external usb device
always prints this error log --- 'reset SuperSpeed USB device number n
using xhci_hcd' when system power on.
Signed-off-by: Pengbo Mu <pengbo.mu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
