SMU firmware expects the driver maintains error context
and doesn't interact with SMU any more when SMU errors
occurred. That will aid in debugging SMU firmware issues.
Add SMU debug option support for this request, it can be
enabled or disabled via amdgpu_smu_debug debugfs file.
Use a 32-bit mask to indicate corresponding debug modes.
Currently, only one mode(HALT_ON_ERROR) is supported.
When enabled, it brings hardware to a kind of halt state
so that no one can touch it any more in the envent of SMU
errors.
The dirver interacts with SMU via sending messages. And
threre are three ways to sending messages to SMU in current
implementation. Handle them respectively as following:
1, smu_cmn_send_smc_msg_with_param() for normal timeout cases
Halt on any error.
2, smu_cmn_send_msg_without_waiting()/smu_cmn_wait_for_response()
for longer timeout cases
Halt on errors apart from ETIME. Otherwise this way won't work.
Let the user handle ETIME error in such a case.
3, smu_cmn_send_msg_without_waiting() for no waiting cases
Halt on errors apart from ETIME. Otherwise second way won't work.
== Command Guide ==
1, enable HALT_ON_ERROR mode
# echo 0x1 > /sys/kernel/debug/dri/0/amdgpu_smu_debug
2, disable HALT_ON_ERROR mode
# echo 0x0 > /sys/kernel/debug/dri/0/amdgpu_smu_debug
v5:
- Use bit mask to allow more debug features.(Evan)
- Use WRAN() instead of BUG().(Evan)
v4:
- Set to halt state instead of a simple hang.(Christian)
v3:
- Use debugfs_create_bool().(Christian)
- Put variable into smu_context struct.
- Don't resend command when timeout.
v2:
- Resend command when timeout.(Lijo)
- Use debugfs file instead of module parameter.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is useful to maintain error context when debugging
SW/FW issues. Introduce amdgpu_device_halt() for this
purpose. It will bring hardware to a kind of halt state,
so that no one can touch it any more.
Compare to a simple hang, the system will keep stable
at least for SSH access. Then it should be trivial to
inspect the hardware state and see what's going on.
v2:
- Set adev->no_hw_access earlier to avoid potential crashes.(Christian)
Suggested-by: Christian Koenig <christian.koenig@amd.com>
Suggested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.co>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in case they are not avaiable in early phase
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leave this bit as hardware default setting
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
should count on GC IP base address
Signed-off-by: Le Ma <le.ma@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
read and authenticate ip discovery binary getting from
vram first, if it is not valid, read and authenticate
the one getting from file
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be used to check ip discovery binary signature
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add _from_vram in the funciton name to diffrentiate
the one used to read from file
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be used when ip_discovery binary is not carried by vbios
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guest OS will setup VCN instance 1 which is disabled as an enabled instance and
execute initialization work on it, but this causes VCN ib ring test failure
on the disabled VCN instance during modprobe:
amdgpu 0000:00:08.0: amdgpu: ring vcn_enc_1.0 uses VM inv eng 5 on hub 1
amdgpu 0000:00:08.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on vcn_dec_0 (-110).
amdgpu 0000:00:08.0: [drm:amdgpu_ib_ring_tests [amdgpu]] *ERROR* IB test failed on vcn_enc_0.0 (-110).
[drm:amdgpu_device_delayed_init_work_handler [amdgpu]] *ERROR* ib ring test failed (-110).
v2: drop amdgpu_discovery_get_vcn_version and rename sriov_config to
vcn_config
v3: modify VCN's revision in SR-IOV and bare-metal
Fixes: baf3f8f374 ("drm/amdgpu: handle SRIOV VCN revision parsing")
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix following warning in SRIOV during modprobe:
amdgpu 0000:00:08.0: GFX9+ requires FB check based on format modifier
WARNING: CPU: 0 PID: 1023 at drivers/gpu/drm/amd/amdgpu/amdgpu_display.c:1150 amdgpu_display_framebuffer_init+0x8e7/0xb40 [amdgpu]
Signed-off-by: Leslie Shi <Yuliang.Shi@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch reverts the following:
commit 48733b224f ("drm/amdkfd: add Navi2x to GWS init conditions")
Disable GWS usage in default settings for now due to FW bugs.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initalize GWS on Navi2x with mec2_fw_version >= 0x42.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-and-tested-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We found some headaches on ASICs don't need that,
so remove that for them.
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we don't find some neccesities to power on/off
SDMA in SMU hw_init/fini(). It makes more sense in SDMA
hw_init/fini().
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hawaii support is mostly untested these days. ROCm user mode also
depends on custom firmware for AQL packet processing, that was never
pushed upstream due to quality regressions in graphics driver testing.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If an existing SVM range overlaps an svm_range_set_attr call, we would
normally split it in order to update only the overlapping part.
However, if the attributes of the existing range would not be changed
splitting it is unnecessary.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The existing function doesn't compare the access bitmaps and flags.
This can result in failure to update those attributes in existing
ranges when all other attributes remained unchanged.
Because the access and flags attributes modify only some bits in the
respective bitmaps, we cannot compare them directly. Instead we need to
check whether applying the attributes to a particular range would
change the bitmaps.
A PREFETCH_LOC attribute must always trigger a migration, even if the
attribute value remains unchanged. E.g. if some pages were migrated due
to a CPU page fault, a prefetch must still be executed to migrate pages
back to VRAM.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add null-pointer check after the last svm_range_new call. This was
originally reported by Zhou Qingyang <zhou1615@umn.edu> based on a
static analyzer.
To avoid duplicating the unwinding code from svm_range_handle_overlap,
I merged the two functions into one.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove not unique timestamp WARNING as same timestamp interrupt happens
on some chips,
Drain fault need to wait for the processed_timestamp to be truly greater
than the checkpoint or the ring to be empty to be sure no stale faults
are handled.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1818
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes the warning below by changing the prototype to a location
that's actually included by the .c files that call
amdgpu_kms_compat_ioctl:
warning: no previous prototype for ‘amdgpu_kms_compat_ioctl’
[-Wmissing-prototypes]
37 | long amdgpu_kms_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
| ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This turns previously global functions into static, thus removing
compile-time warnings such as:
warning: no previous prototype for 'pm_set_resources_vi' [-Wmissing-prototypes]
113 | int pm_set_resources_vi(struct packet_manager *pm, uint32_t *buffer,
| ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This turns previously global functions into static, thus removing
compile-time warnings such as:
warning: no previous prototype for 'amdgpu_vkms_output_init' [-Wmissing-prototypes]
399 | int amdgpu_vkms_output_init(struct drm_device *dev,
| ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This fixes various warnings relating to erroneous docstring syntax, of
which some are listed below:
warning: Function parameter or member 'adev' not described in
'amdgpu_atomfirmware_ras_rom_addr'
...
warning: expecting prototype for amdgpu_atpx_validate_functions().
Prototype was for amdgpu_atpx_validate() instead
...
warning: Excess function parameter 'mem' description in 'amdgpu_preempt_mgr_new'
...
warning: Cannot understand * @kfd_get_cu_occupancy - Collect number of
waves in-flight on this device
...
warning: This comment starts with '/**', but isn't a kernel-doc
comment. Refer Documentation/doc-guide/kernel-doc.rst
Signed-off-by: Isabella Basso <isabbasso@riseup.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For the ASIC has big FB, it need more time to clear FB during reset.
This change extended SRIOV VF waiting reset completion timeout from 5s
to 10s.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Acked-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV VF, the XGMI topology was not recovered after reset. This
change added code to SRIOV VF reset function to update XGMI topology
for SRIOV VF after reset.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV VF, XGMI was not initialized in PSP during recover. This change
added PSP XGMI initialization for SRIOV VF during recover.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On SRIOV, host driver can support FLR(function level reset) on individual VF
within the hive which might bring the individual device back to normal without
the necessary to execute the hive reset. If the FLR failed , host driver will
trigger the hive reset, each guest VF will get reset notification before the
real hive reset been executed. The VF device can handle the reset request
individually in it's reset work handler.
This change updated gpu recover sequence to skip reset other device in
the same hive for SRIOV VF.
Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Shaoyun Liu <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Allow for disabling non transparent mode of LTTPR for running tests.
[How]
Add a feature flag and set them during init sequence. The flags are
already being used in DC.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RAS poison mode is enabled by default on the platform.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is to force SST sequence on MST capable receivers.
v2: squash in compilation fix when CONFIG_DRM_AMD_DC_DCN is not set
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In non trivial scenarios, the action id alone is not sufficient to
identify the program causing the warning. Before the previous patch,
the generated stack-trace pointed out at least the involved device
driver.
Let's additionally include the program name and id, and the relevant
device name.
If the user needs additional infos, he can fetch them via a kernel
probe, leveraging the arguments added here.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
The WARN_ONCE() in bpf_warn_invalid_xdp_action() can be triggered by
any bugged program, and even attaching a correct program to a NIC
not supporting the given action.
The resulting splat, beyond polluting the logs, fouls automated tools:
e.g. a syzkaller reproducers using an XDP program returning an
unsupported action will never pass validation.
Replace the WARN_ONCE with a less intrusive pr_warn_once().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/016ceec56e4817ebb2a9e35ce794d5c917df572c.1638189075.git.pabeni@redhat.com
kunit.py isn't very clear that
1) it stashes a copy of the unparsed output in $BUILD_DIR/test.log
2) it sets $BUILD_DIR=.kunit by default
So it's trickier than it should be for a user to come up with the right
command to do so.
Make kunit.py print out a command for this if
a) we saw a test case crash
b) we only ran one kernel (test.log only contains output from the last)
Example suggested command:
$ scripts/decode_stacktrace.sh .kunit/vmlinux .kunit < .kunit/test.log | tee .kunit/decoded.log | ./tools/testing/kunit/kunit.py parse
Without debug info a user might see something like
[14:11:25] Call Trace:
[14:11:25] ? kunit_binary_assert_format (:?)
[14:11:25] kunit_try_run_case (test.c:?)
[14:11:25] ? __kthread_parkme (kthread.c:?)
[14:11:25] kunit_generic_run_threadfn_adapter (try-catch.c:?)
[14:11:25] ? kunit_generic_run_threadfn_adapter (try-catch.c:?)
[14:11:25] kthread (kthread.c:?)
[14:11:25] new_thread_handler (:?)
[14:11:25] [CRASHED]
`tee` is in GNU coreutils, so it seems fine to add that into the
pipeline by default, that way users can inspect the otuput in more
detail.
Note: to turn on debug info, users would need to do something like
$ echo -e 'CONFIG_DEBUG_KERNEL=y\nCONFIG_DEBUG_INFO=y' >> .kunit/.kunitconfig
$ ./tools/testing/kunit/kunit.py config
$ ./tools/testing/kunit/kunit.py build
$ <then run decode_stacktrace.sh now vmlinux is updated>
This feels too clunky to include in the instructions.
With --kconfig_add [1], it would become a bit less painful.
[1] https://lore.kernel.org/linux-kselftest/20211106013058.2621799-2-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Problem: currently, if you remove something from your kunitconfig,
kunit.py will not regenerate the .config file.
The same thing happens if you did --kunitconfig_add=CONFIG_KASAN=y [1]
and then ran again without it. Your new run will still have KASAN.
The reason is that kunit.py won't regenerate the .config file if it's a
superset of the kunitconfig. This speeds it up a bit for iterating.
This patch adds an additional check that forces kunit.py to regenerate
the .config file if the current kunitconfig doesn't match the previous
one.
What this means:
* deleting entries from .kunitconfig works as one would expect
* dropping a --kunitconfig_add also triggers a rebuild
* you can still edit .config directly to turn on new options
We implement this by creating a `last_used_kunitconfig` file in the
build directory (so .kunit, by default) after we generate the .config.
When comparing the kconfigs, we compare python sets, so duplicates and
permutations don't trip us up.
The majority of this patch is adding unit tests for the existing logic
and for the new case where `last_used_kunitconfig` differs.
[1] https://lore.kernel.org/linux-kselftest/20211106013058.2621799-2-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The current error message is precise, but not very clear if you don't
already know what it's talking about, e.g.
> $ make ARCH=um olddefconfig O=.kunit
> ERROR:root:Provided Kconfig is not contained in validated .config. Following fields found in kunitconfig, but not in .config: CONFIG_DRM=y
Try to reword the error message so that it's
* your missing options usually have unsatisified dependencies
* if you're on UML, that might be the cause (it is, in this example)
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
E.g. run tests but with KASAN
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --kconfig_add=CONFIG_KASAN=y
This also works with --kunitconfig
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --kunitconfig=fs/ext4 --kconfig_add=CONFIG_KASAN=y
This flag is inspired by TuxMake's --kconfig-add, see
https://gitlab.com/Linaro/tuxmake#examples.
Our version just uses "_" as the delimiter for consistency with
pre-existing flags like --build_dir, --make_options, --kernel_args, etc.
Note: this does make it easier to run into a pre-existing edge case:
$ ./tools/testing/kunit/kunit.py run --arch=x86_64 --kconfig_add=CONFIG_KASAN=y
$ ./tools/testing/kunit/kunit.py run --arch=x86_64
This second invocation ^ still has KASAN enabled!
kunit.py won't call olddefconfig if our current .config is already a
superset of the provided kunitconfig.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
read_from_file() clears its `self` Kconfig object and parses a config
file.
It is a way to construct Kconfig objects more so than an operation on
Kconfig objects. This is reflected in the fact its only ever used as:
kconfig = kunit_config.Kconfig()
kconfig.read_from_file(path)
So clean this up and simplify callers by replacing it with
kconfig = kunit_config.parse_file(path)
Do the same thing for the related parse_from_string() function as well.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In validate_change(), there is a check since v2.6.12 to make sure that
each of the child cpusets must be a subset of a parent cpuset. IOW, it
allows child cpusets to restrict what changes can be made to a parent's
"cpuset.cpus". This actually violates one of the core principles of the
default hierarchy where a cgroup higher up in the hierarchy should be
able to change configuration however it sees fit as deligation breaks
down otherwise.
To address this issue, the check is now removed for the default hierarchy
to free parent cpusets from being restricted by child cpusets. The
check will still apply for legacy hierarchy.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
With the parser rework [1] and run_kernel() rework [2], this allows the
parser to print out test results incrementally.
Currently, that's held up by the fact that the LineStream eagerly
pre-fetches the next line when you call pop().
This blocks parse_test_result() from returning until the line *after*
the "ok 1 - test name" line is also printed.
One can see this with the following example:
$ (echo -e 'TAP version 14\n1..3\nok 1 - fake test'; sleep 2; echo -e 'ok 2 - fake test 2'; sleep 3; echo -e 'ok 3 - fake test 3') | ./tools/testing/kunit/kunit.py parse
Before this patch [1]: there's a pause before 'fake test' is printed.
After this patch: 'fake test' is printed out immediately.
This patch also adds
* a unit test to verify LineStream's behavior directly
* a test case to ensure that it's lazily calling the generator
* an explicit exception for when users go beyond EOF
[1] https://lore.kernel.org/linux-kselftest/20211006170049.106852-1-dlatypov@google.com/
[2] https://lore.kernel.org/linux-kselftest/20211005011340.2826268-1-dlatypov@google.com/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, the results for individial parameters in a parameterised test
are simply output as (K)TAP diagnostic lines.
As kunit_tool now supports nested subtests, report each parameter as its
own subtest.
For example, here's what the output now looks like:
# Subtest: inode_test_xtimestamp_decoding
ok 1 - 1901-12-13 Lower bound of 32bit < 0 timestamp, no extra bits
ok 2 - 1969-12-31 Upper bound of 32bit < 0 timestamp, no extra bits
ok 3 - 1970-01-01 Lower bound of 32bit >=0 timestamp, no extra bits
ok 4 - 2038-01-19 Upper bound of 32bit >=0 timestamp, no extra bits
ok 5 - 2038-01-19 Lower bound of 32bit <0 timestamp, lo extra sec bit on
ok 6 - 2106-02-07 Upper bound of 32bit <0 timestamp, lo extra sec bit on
ok 7 - 2106-02-07 Lower bound of 32bit >=0 timestamp, lo extra sec bit on
ok 8 - 2174-02-25 Upper bound of 32bit >=0 timestamp, lo extra sec bit on
ok 9 - 2174-02-25 Lower bound of 32bit <0 timestamp, hi extra sec bit on
ok 10 - 2242-03-16 Upper bound of 32bit <0 timestamp, hi extra sec bit on
ok 11 - 2242-03-16 Lower bound of 32bit >=0 timestamp, hi extra sec bit on
ok 12 - 2310-04-04 Upper bound of 32bit >=0 timestamp, hi extra sec bit on
ok 13 - 2310-04-04 Upper bound of 32bit>=0 timestamp, hi extra sec bit 1. 1 ns
ok 14 - 2378-04-22 Lower bound of 32bit>= timestamp. Extra sec bits 1. Max ns
ok 15 - 2378-04-22 Lower bound of 32bit >=0 timestamp. All extra sec bits on
ok 16 - 2446-05-10 Upper bound of 32bit >=0 timestamp. All extra sec bits on
# inode_test_xtimestamp_decoding: pass:16 fail:0 skip:0 total:16
ok 1 - inode_test_xtimestamp_decoding
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It's possible that a parameterised test could end up with zero
parameters. At the moment, the test function will nevertheless be called
with NULL as the parameter. Instead, don't try to run the test code, and
just mark the test as SKIPped.
Reported-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
It's possible for a test to have a subtest header, but zero valid
subtests. We used to error on this if the test plan had no subtests
listed, but it's possible to have subtests without a test plan (indeed,
this is how parameterised tests work).
Tests with 0 subtests now have the result NO_TESTS, and will report an
error (which does not halt test execution, but is printed in a scary red
colour and is noted in the results summary).
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The (K)TAP spec encourages test output to begin with a 'test plan': a
count of the number of tests being run of the form:
1..n
However, some test suites might not know the number of subtests in
advance (for example, KUnit's parameterised tests use a generator
function). In this case, it's not possible to print the test plan in
advance.
kunit_tool already parses test output which doesn't contain a plan, but
reports an error. Since we want to use nested subtests with KUnit
paramterised tests, remove this error.
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This formalizes the checks KUnit maintainers have been running (or in
other cases: forgetting to run).
This script also runs them all in parallel to minimize friction (pytype
can be fairly slow, but not slower than running kunit.py).
Example output:
$ ./tools/testing/kunit/run_checks.py
Waiting on 4 checks (kunit_tool_test.py, kunit smoke test, pytype, mypy)...
kunit_tool_test.py: PASSED
mypy: PASSED
pytype: PASSED
kunit smoke test: PASSED
On failure or timeout (5 minutes), it'll dump out the stdout/stderr.
E.g. adding in a type-checking error:
mypy: FAILED
> kunit.py:54: error: Name 'nonexistent_function' is not defined
> Found 1 error in 1 file (checked 8 source files)
mypy and pytype are two Python type-checkers and must be installed.
This file treats them as optional and will mark them as SKIPPED if not
installed.
This tool also runs `kunit.py run --kunitconfig=lib/kunit` to run
KUnit's own KUnit tests and to verify KUnit kernel code and kunit.py
play nicely together.
It uses --build_dir=kunit_run_checks so as not to clobber the default
build_dir, which helps make it faster by reducing the need to rebuild,
esp. if you're been passing in --arch instead of using UML.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
KUnit does not have any first party support for "mocking".
The original RFC had some, but the code got dropped.
However, the documentation patches never got updated. This fixes that.
https://kunit.dev/mocking.html has a current writeup on the status quo
and will hopefully be eventually folded into the in-kernel
Documentation.
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, KUnit will report SKIPPED tests as having failed if one uses
--json.
Add the missing if statement to set the appropriate status ("SKIP").
See https://api.kernelci.org/schema-test-case.html:
"status": {
"type": "string",
"description": "The status of the execution of this test case",
"enum": ["PASS", "FAIL", "SKIP", "ERROR"],
"default": "PASS"
},
with this, we now can properly produce all four of the statuses.
Fixes: 5acaf6031f ("kunit: tool: Support skipped tests in kunit_tool")
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When we recently converted the capture code to use vma snapshots,
we forgot to free the struct i915_capture_list list items after use.
Fix that by bringing back a kfree.
Fixes: ff20afc4ce ("drm/i915: Update error capture code to avoid using the current vma state")
Cc: Ramalingam C <ramalingam.c@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211209141304.393479-1-thomas.hellstrom@linux.intel.com
