And allow instrumentation inside it because it does calls to other
facilities which will not be tagged noinstr.
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xc73: call to mce_panic() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-8-bp@alien8.de
Mark all the MCE severity computation logic noinstr and allow
instrumentation when it "calls out".
Fixes
vmlinux.o: warning: objtool: do_machine_check()+0xc5d: call to mce_severity() leaves .noinstr.text section
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-7-bp@alien8.de
Instead, sandwitch around the call which is done in noinstr context and
mark the caller - mce_gather_info() - as noinstr.
Also, document what the whole instrumentation strategy with #MC is going
to be in the future and where it all is supposed to be going to.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211208111343.8130-5-bp@alien8.de
In commit 41ca9caaae
("drm/mediatek: hdmi: Add check for CEA modes only") a check
for CEA modes was added to function mtk_hdmi_bridge_mode_valid()
in order to address possible issues on MT8167;
moreover, with commit c91026a938
("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock")
another similar check was introduced.
Unfortunately though, at the time of writing, MT8173 does not provide
any mtk_hdmi_conf structure and this is crashing the kernel with NULL
pointer upon entering mtk_hdmi_bridge_mode_valid(), which happens as
soon as a HDMI cable gets plugged in.
To fix this regression, add a NULL pointer check for hdmi->conf in the
said function, restoring HDMI functionality and avoiding NULL pointer
kernel panics.
Fixes: 41ca9caaae ("drm/mediatek: hdmi: Add check for CEA modes only")
Fixes: c91026a938 ("drm/mediatek: hdmi: Add optional limit on maximal HDMI mode clock")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Collect the dipslay related mask under the display sub-structure
in intel_device_info.
Note that there is a slight change in behaviour in that we zero
out .display entirely when !HAS_DISPLAY (aka. pipe_mask==0), so
now we also zero out the other masks (although cpu_transocder_mask
should already be zero of pipe_mask is zero). abox_mask is
only used by the display core init when HAS_DISPLAY is true, so
the actual behaviour of the system shouldn't change despite the
zeroing of these masks.
There is a lot more display stuff directly in device info that
could be moved over. Maybe someone else will be inspired to do it...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211210122726.12577-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
kstrdup() returns NULL when some internal memory errors happen, it is
better to check the return value of it. Otherwise, we may not to be able
to catch some memory errors in time.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Link: https://lore.kernel.org/r/tencent_1E3950293AC22395ACFE99404C985D738309@qq.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update the definition of the IPA interconnects for IPA v4.5 so
the path between IPA and system memory is represented by a single
"memory" interconnect.
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first two interconnects defined for IPA on the SDX55 SoC are
really two parts of what should be represented as a single path
between IPA and system memory.
Fix this by combining the "memory-a" and "memory-b" interconnects
into a single "memory" interconnect.
Reported-by: David Heidelberg <david@ixit.cz>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables the "/proc/sys/net/unix/max_dgram_qlen" sysctl to be
exposed to non-init user namespaces. max_dgram_qlen is used as the default
"sk_max_ack_backlog" value for when a unix socket is created.
Currently, when a networking namespace is initialized, its unix sysctls
are exposed only if the user namespace that "owns" it is the init user
namespace. If there is an non-init user namespace that "owns" a networking
namespace (for example, in the case after we call clone() with both
CLONE_NEWUSER and CLONE_NEWNET set), the sysctls are hidden from view
and not configurable.
Exposing the unix sysctl is safe because any changes made to it will be
limited in scope to the networking namespace the non-init user namespace
"owns" and has privileges over (changes won't affect any other net
namespace). There is also no possibility of a non-privileged user namespace
messing up the net namespace sysctls it shares with its parent user namespace.
When a new user namespace is created without unsharing the network namespace
(eg calling clone() with CLONE_NEWUSER), the new user namespace shares its
parent's network namespace. Write access is protected by the mode set
in the sysctl's ctl_table (and enforced by procfs). Here in the case of
"max_dgram_qlen", 0644 is set; only the user owner has write access.
v1 -> v2:
* Add more detail to commit message, specify the
"/proc/sys/net/unix/max_dgram_qlen" sysctl in commit message.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On PREEMPT_RT the seqcount_t for synchronisation is required on 32bit
architectures even on UP because the softirq (and the threaded IRQ handler) can
be preempted.
With the seqcount_t for synchronisation, a reader with higher priority can
preempt the writer and then spin endlessly in read_seqcount_begin() while the
writer can't make progress.
To avoid such a lock up on PREEMPT_RT the writer must disable preemption during
the update. There is no need to disable interrupts because no writer is using
this API in hard-IRQ context on PREEMPT_RT.
Disable preemption on 32bit-RT within the u64_stats write section.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Guillaume Nault says:
====================
bareudp: Remove unused code from header file
Stop exporting unused functions and structures in bareudp.h. The only
piece of bareudp.h that is actually used is netif_is_bareudp(). The
rest can be moved to bareudp.c or even dropped entirely.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This structure is used only in bareudp.c.
While there, adjust include files: we need netdevice.h, not skbuff.h.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When key_exchange is disabled, there is no reason to accept MSG_CRYPTO
msgs if it doesn't send MSG_CRYPTO msgs.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In DMA threshold mode, frame underflow errors may sometimes occur when
the TC(threshold control) value is not enough. The TC value need to be
bumped up in this case.
There is no underflow interrupt bit on DMA_CH(#i)_Status of dwmac4, so
the DMA threshold cannot be bumped up in stmmac_dma_interrupt(). The
i.mx8mp board observed an underflow error while running NFS boot, the
NFS rootfs could not be mounted.
The underflow error can be got from the DMA descriptor TDES3 on dwmac4.
This patch bump up tc value once underflow error is got from TDES3.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
this helps human readers considerably to determine the line name for a
given offset or vice versa.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[ nsaenz: corrected patch title ]
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://lore.kernel.org/r/20211130161147.317653-1-u.kleine-koenig@pengutronix.de
The double `the' in the comment in line 142 is repeated. Remove one
of them from the comment.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When updating the error capture code and introducing vma snapshots,
we introduced code to hold the vma in memory while capturing it,
calling i915_active_acquire_if_busy(). Now that function isn't relevant
for perma-pinned vmas and caused important vmas to be dropped from the
coredump. Like for example the GuC log.
Fix this by instead requiring those vmas to be pinned while capturing.
Tested by running the initial subtests of the gem_exec_capture igt test
with GuC submission enabled and verifying that a GuC log blob appears
in the output.
Fixes: ff20afc4ce ("drm/i915: Update error capture code to avoid using the current vma state")
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reported-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211208082245.86933-1-thomas.hellstrom@linux.intel.com
Header with Samsung Exynos USI driver constants used by both DTS and
driver.
-----BEGIN PGP SIGNATURE-----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=JUYk
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-exynos-usi-5.17' into next/drivers
Samsung DTS ARM64 driver bindings for v5.17
Header with Samsung Exynos USI driver constants used by both DTS and
driver.
According to USI v2 driver change[1], serial_0 node should be converted to
use the USI node hierarchy. syscon_peric0 will be used as a syscon node
to control the USI00_USI_SW_CONF register.
This also changes the serial node name from uart@ to serial@.
[1]: https://lore.kernel.org/linux-samsung-soc/20211204195757.8600-2-semen.protsenko@linaro.org/
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20211208091853.8557-1-chanho61.park@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Add constants for choosing USIv2 configuration mode in device tree.
Those are further used in USI driver to figure out which value to write
into SW_CONF register. Also document USIv2 IP-core bindings.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211204195757.8600-2-semen.protsenko@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around this info missing from the ACPI tables on devices where
the int3472 driver is used, the int3472 MFD-cell drivers attach info about
consumers to the clks/regulators when registering these.
This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.
All the sensor ACPI fw-nodes have a _DEP dependency on the INT3472 ACPI
fw-node, so to work around these probe ordering issues the ACPI core /
i2c-code does not instantiate the I2C-clients for any ACPI devices
which have a _DEP dependency on an INT3472 ACPI device until all
_DEP-s are met.
This relies on acpi_dev_clear_dependencies() getting called by the driver
for the _DEP-s when they are ready, add a acpi_dev_clear_dependencies()
call to the discrete.c probe code.
In the tps68470 case calling acpi_dev_clear_dependencies() is already done
by the acpi_gpiochip_add() call done by the driver for the GPIO MFD cell
(The GPIO cell is deliberately the last cell created to make sure the
clk + regulator cells are already instantiated when this happens).
However for proper probe ordering, the clk/regulator cells must not just
be instantiated the must be fully ready (the clks + regulators must be
registered with their subsystems).
Add MODULE_SOFTDEP dependencies for the clk and regulator drivers for
the instantiated MFD-cells so that these are loaded before us and so
that they bind immediately when the platform-devs are instantiated.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-12-hdegoede@redhat.com
Pass tps68470_regulator_platform_data to the tps68470-regulator
MFD-cell, specifying the voltages of the various regulators and
tying the regulators to the sensor supplies so that sensors which use
the TPS68470 can find their regulators.
Since the voltages and supply connections are board-specific, this
introduces a DMI matches int3472_tps68470_board_data struct which
contains the necessary per-board info.
This per-board info also includes GPIO lookup information for the
sensor IO lines which may be connected to the tps68470 GPIOs.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-11-hdegoede@redhat.com
Pass tps68470_clk_platform_data to the tps68470-clk MFD-cell,
so that sensors which use the TPS68470 can find their clock.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-10-hdegoede@redhat.com
The discrete.c code is not the only code which needs to lookup the
acpi_device and device-name for the sensor for which the INT3472
ACPI-device is a GPIO/clk/regulator provider.
The tps68470.c code also needs this functionality, so factor this
out into a new get_sensor_adev_and_name() helper.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-9-hdegoede@redhat.com
The intel_skl_int3472.ko module contains 2 separate drivers,
the int3472_discrete platform driver and the int3472_tps68470
I2C-driver.
These 2 drivers contain very little shared code, only
skl_int3472_get_acpi_buffer() and skl_int3472_fill_cldb() are
shared.
Split the module into 2 drivers, linking the little shared code
directly into both.
This will allow us to add soft-module dependencies for the
tps68470 clk, gpio and regulator drivers to the new
intel_skl_int3472_tps68470.ko to help with probe ordering issues
without causing these modules to get loaded on boards which only
use the int3472_discrete platform driver.
While at it also rename the .c and .h files to remove the
cumbersome intel_skl_int3472_ prefix.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-8-hdegoede@redhat.com
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around cases where this info is not present in the firmware tables,
which is often the case on x86/ACPI devices, both frameworks allow the
provider-driver to attach info about consumers to the provider-device
during probe/registration of the provider device.
The TI TPS68470 PMIC is used x86/ACPI devices with the consumer-info
missing from the ACPI tables. Thus the tps68470-clk and tps68470-regulator
drivers must provide the consumer-info at probe time.
Define tps68470_clk_platform_data and tps68470_regulator_platform_data
structs to allow the x86 platform code to pass the necessary consumer info
to these drivers.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-5-hdegoede@redhat.com
Change i2c_acpi_new_device() into i2c_acpi_new_device_by_fwnode() and
add a static inline wrapper providing the old i2c_acpi_new_device()
behavior.
This is necessary because in some cases we may only have access
to the fwnode / acpi_device and not to the matching physical-node
struct device *.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-4-hdegoede@redhat.com
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around cases where this info is not present in the firmware tables,
which is often the case on x86/ACPI devices, both frameworks allow the
provider-driver to attach info about consumers to the clks/regulators
when registering these.
This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.
To ensure the correct probe-ordering the ACPI core has code to defer the
enumeration of consumers affected by this until the providers are ready.
Call the new acpi_dev_ready_for_enumeration() helper to avoid
enumerating / instantiating i2c-clients too early.
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-3-hdegoede@redhat.com
The clk and regulator frameworks expect clk/regulator consumer-devices
to have info about the consumed clks/regulators described in the device's
fw_node.
To work around cases where this info is not present in the firmware tables,
which is often the case on x86/ACPI devices, both frameworks allow the
provider-driver to attach info about consumers to the clks/regulators
when registering these.
This causes problems with the probe ordering wrt drivers for consumers
of these clks/regulators. Since the lookups are only registered when the
provider-driver binds, trying to get these clks/regulators before then
results in a -ENOENT error for clks and a dummy regulator for regulators.
One case where we hit this issue is camera sensors such as e.g. the OV8865
sensor found on the Microsoft Surface Go. The sensor uses clks, regulators
and GPIOs provided by a TPS68470 PMIC which is described in an INT3472
ACPI device. There is special platform code handling this and setting
platform_data with the necessary consumer info on the MFD cells
instantiated for the PMIC under: drivers/platform/x86/intel/int3472.
For this to work properly the ov8865 driver must not bind to the I2C-client
for the OV8865 sensor until after the TPS68470 PMIC gpio, regulator and
clk MFD cells have all been fully setup.
The OV8865 on the Microsoft Surface Go is just one example, all X86
devices using the Intel IPU3 camera block found on recent Intel SoCs
have similar issues where there is an INT3472 HID ACPI-device, which
describes the clks and regulators, and the driver for this INT3472 device
must be fully initialized before the sensor driver (any sensor driver)
binds for things to work properly.
On these devices the ACPI nodes describing the sensors all have a _DEP
dependency on the matching INT3472 ACPI device (there is one per sensor).
This allows solving the probe-ordering problem by delaying the enumeration
(instantiation of the I2C-client in the ov8865 example) of ACPI-devices
which have a _DEP dependency on an INT3472 device.
The new acpi_dev_ready_for_enumeration() helper used for this is also
exported because for devices, which have the enumeration_by_parent flag
set, the parent-driver will do its own scan of child ACPI devices and
it will try to enumerate those during its probe(). Code doing this such
as e.g. the i2c-core-acpi.c code must call this new helper to ensure
that it too delays the enumeration until all the _DEP dependencies are
met on devices which have the new honor_deps flag set.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211203102857.44539-2-hdegoede@redhat.com
The generic atomic64 implementation provides:
* atomic64_and_return()
* atomic64_or_return()
* atomic64_xor_return()
... but none of these exist in the standard atomic64 API as described by
scripts/atomic/atomics.tbl, and none of these have prototypes exposed by
<asm-generic/atomic64.h>.
The lkp kernel test robot noted this results in warnings when building with
W=1:
lib/atomic64.c:82:5: warning: no previous prototype for 'generic_atomic64_and_return' [-Wmissing-prototypes]
lib/atomic64.c:82:5: warning: no previous prototype for 'generic_atomic64_or_return' [-Wmissing-prototypes]
lib/atomic64.c:82:5: warning: no previous prototype for 'generic_atomic64_xor_return' [-Wmissing-prototypes]
This appears to have been a thinko in commit:
28aa2bda22 ("locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()")
... where we grouped add/sub separately from and/ox/xor, so that we could avoid
implementing _return forms for the latter group, but forgot to remove
ATOMIC64_OP_RETURN() for that group.
This doesn't cause any functional problem, but it's pointless to build code
which cannot be used. Remove the unusable code. This does not affect add/sub,
for which _return forms will still be built.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20211126115923.41489-1-mark.rutland@arm.com
Set DTIM policy to DTIM stick mode, so station follows AP DTIM
interval rather than listen interval which is set in peer assoc cmd.
DTIM stick mode is more preferred per firmware team request.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1638948694-15582-1-git-send-email-quic_cjhuang@quicinc.com
