AM654 base board and iot platforms do not have mcan instances pinned out.
Therefore, disable all the mcan instances.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20211122134159.29936-3-a-govindraju@ti.com
Add Support for two MCAN controllers present on the am65x SOC. Both support
classic CAN messages as well as CAN-FD.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Apurva Nandan <a-nandan@ti.com>
Link: https://lore.kernel.org/r/20211122134159.29936-2-a-govindraju@ti.com
Taking sb_writers whilst holding mmap_lock isn't allowed and will result in
a lockdep warning like that below. The problem comes from cachefiles
needing to take the sb_writers lock in order to do a write to the cache,
but being asked to do this by netfslib called from readpage, readahead or
write_begin[1].
Fix this by always offloading the write to the cache off to a worker
thread. The main thread doesn't need to wait for it, so deadlock can be
avoided.
This can be tested by running the quick xfstests on something like afs or
ceph with lockdep enabled.
WARNING: possible circular locking dependency detected
5.15.0-rc1-build2+ #292 Not tainted
------------------------------------------------------
holetest/65517 is trying to acquire lock:
ffff88810c81d730 (mapping.invalidate_lock#3){.+.+}-{3:3}, at: filemap_fault+0x276/0x7a5
but task is already holding lock:
ffff8881595b53e8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x28d/0x59c
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&mm->mmap_lock#2){++++}-{3:3}:
validate_chain+0x3c4/0x4a8
__lock_acquire+0x89d/0x949
lock_acquire+0x2dc/0x34b
__might_fault+0x87/0xb1
strncpy_from_user+0x25/0x18c
removexattr+0x7c/0xe5
__do_sys_fremovexattr+0x73/0x96
do_syscall_64+0x67/0x7a
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #1 (sb_writers#10){.+.+}-{0:0}:
validate_chain+0x3c4/0x4a8
__lock_acquire+0x89d/0x949
lock_acquire+0x2dc/0x34b
cachefiles_write+0x2b3/0x4bb
netfs_rreq_do_write_to_cache+0x3b5/0x432
netfs_readpage+0x2de/0x39d
filemap_read_page+0x51/0x94
filemap_get_pages+0x26f/0x413
filemap_read+0x182/0x427
new_sync_read+0xf0/0x161
vfs_read+0x118/0x16e
ksys_read+0xb8/0x12e
do_syscall_64+0x67/0x7a
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #0 (mapping.invalidate_lock#3){.+.+}-{3:3}:
check_noncircular+0xe4/0x129
check_prev_add+0x16b/0x3a4
validate_chain+0x3c4/0x4a8
__lock_acquire+0x89d/0x949
lock_acquire+0x2dc/0x34b
down_read+0x40/0x4a
filemap_fault+0x276/0x7a5
__do_fault+0x96/0xbf
do_fault+0x262/0x35a
__handle_mm_fault+0x171/0x1b5
handle_mm_fault+0x12a/0x233
do_user_addr_fault+0x3d2/0x59c
exc_page_fault+0x85/0xa5
asm_exc_page_fault+0x1e/0x30
other info that might help us debug this:
Chain exists of:
mapping.invalidate_lock#3 --> sb_writers#10 --> &mm->mmap_lock#2
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_lock#2);
lock(sb_writers#10);
lock(&mm->mmap_lock#2);
lock(mapping.invalidate_lock#3);
*** DEADLOCK ***
1 lock held by holetest/65517:
#0: ffff8881595b53e8 (&mm->mmap_lock#2){++++}-{3:3}, at: do_user_addr_fault+0x28d/0x59c
stack backtrace:
CPU: 0 PID: 65517 Comm: holetest Not tainted 5.15.0-rc1-build2+ #292
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
dump_stack_lvl+0x45/0x59
check_noncircular+0xe4/0x129
? print_circular_bug+0x207/0x207
? validate_chain+0x461/0x4a8
? add_chain_block+0x88/0xd9
? hlist_add_head_rcu+0x49/0x53
check_prev_add+0x16b/0x3a4
validate_chain+0x3c4/0x4a8
? check_prev_add+0x3a4/0x3a4
? mark_lock+0xa5/0x1c6
__lock_acquire+0x89d/0x949
lock_acquire+0x2dc/0x34b
? filemap_fault+0x276/0x7a5
? rcu_read_unlock+0x59/0x59
? add_to_page_cache_lru+0x13c/0x13c
? lock_is_held_type+0x7b/0xd3
down_read+0x40/0x4a
? filemap_fault+0x276/0x7a5
filemap_fault+0x276/0x7a5
? pagecache_get_page+0x2dd/0x2dd
? __lock_acquire+0x8bc/0x949
? pte_offset_kernel.isra.0+0x6d/0xc3
__do_fault+0x96/0xbf
? do_fault+0x124/0x35a
do_fault+0x262/0x35a
? handle_pte_fault+0x1c1/0x20d
__handle_mm_fault+0x171/0x1b5
? handle_pte_fault+0x20d/0x20d
? __lock_release+0x151/0x254
? mark_held_locks+0x1f/0x78
? rcu_read_unlock+0x3a/0x59
handle_mm_fault+0x12a/0x233
do_user_addr_fault+0x3d2/0x59c
? pgtable_bad+0x70/0x70
? rcu_read_lock_bh_held+0xab/0xab
exc_page_fault+0x85/0xa5
? asm_exc_page_fault+0x8/0x30
asm_exc_page_fault+0x1e/0x30
RIP: 0033:0x40192f
Code: ff 48 89 c3 48 8b 05 50 28 00 00 48 85 ed 7e 23 31 d2 4b 8d 0c 2f eb 0a 0f 1f 00 48 8b 05 39 28 00 00 48 0f af c2 48 83 c2 01 <48> 89 1c 01 48 39 d5 7f e8 8b 0d f2 27 00 00 31 c0 85 c9 74 0e 8b
RSP: 002b:00007f9931867eb0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: 00007f9931868700 RCX: 00007f993206ac00
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 00007ffc13e06ee0
RBP: 0000000000000100 R08: 0000000000000000 R09: 00007f9931868700
R10: 00007f99318689d0 R11: 0000000000000202 R12: 00007ffc13e06ee0
R13: 0000000000000c00 R14: 00007ffc13e06e00 R15: 00007f993206a000
Fixes: 726218fdc2 ("netfs: Define an interface to talk to a cache")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jeff Layton <jlayton@kernel.org>
cc: Jan Kara <jack@suse.cz>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20210922110420.GA21576@quack2.suse.cz/ [1]
Link: https://lore.kernel.org/r/163887597541.1596626.2668163316598972956.stgit@warthog.procyon.org.uk/ # v1
Allow drm_fbdev_generic_setup() to pick the default bpp value for the
framebuffer.
This has no functional impact because the default is 32, given that
mode_config.preferred_depth is not set for Rockchip.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211101114622.813536-1-john@metanate.com
The Rockchip fbdev code does not add anything compared to
drm_fbdev_generic_setup(); the one custom function for .fb_mmap does the
same thing as gem_prime_mmap which is called by the helper.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20211029115014.264084-1-john@metanate.com
These fields are marked read-only for USB4 routers so do not touch them
in that case. Update the kernel-doc of tb_dp_port_set_hops() to reflect
this too.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This might happen if the boot firmware uses different amount of NFC
credits than what the router suggests, or we are dealing with pre-USB4
device.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Sometimes when plugging in a USB4 device we might see following error:
thunderbolt 1-0:3.1: runtime PM trying to activate child device 1-0:3.1 but parent (usb4_port3) is not active
This happens because the parent USB4 port was still runtime suspended.
Fix this by runtime resuming the USB4 port before scanning the retimers
below it.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
If the boot firmware implements connection manager of its own it may not
create the paths in the same way or order we do. For example it may
create first PCIe tunnel and then USB3 tunnel. When we restore our
tunnels (first de-activating them) we may be doing that over completely
different tunnels and that leaves them possibly non-functional. For this
reason we re-use the tunnel discovery functionality and find out all the
existing tunnels, and tear them down. Once that is done we can restore
our tunnels.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
If protocol tunnels are already up when the driver is loaded, for
instance if the boot firmware implements connection manager of its own,
runtime PM reference count of the consumer devices behind the tunnel
might have been increased already before the device link is created but
the supplier device runtime PM reference count is not. This leads to a
situation where the supplier (the Thunderbolt driver) can runtime
suspend even if it should not because the corresponding protocol tunnel
needs to be up causing the devices to be removed from the corresponding
native bus.
Prevent this from happening by making both sides of the link runtime PM
active briefly. The pm_runtime_put() for the consumer (PCIe
root/downstream port, xHCI) then allows it to runtime suspend again but
keeps the supplier runtime resumed the whole time it is runtime active.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
tb_xdp_properties_changed_request() was calling tb_xdp_handle_error() with
a struct tb_xdp_properties_changed_response on the stack, which does not
have the "error" field present when cast to struct tb_xdp_error_response.
This was detected when building with -Warray-bounds:
drivers/thunderbolt/xdomain.c: In function 'tb_xdomain_properties_changed':
drivers/thunderbolt/xdomain.c:226:22: error: array subscript 'const struct tb_xdp_error_response[0]' is partly outside array bounds of 'struct tb_xdp_properties_changed_response[1]' [-Werror=array-bounds]
226 | switch (error->error) {
| ~~~~~^~~~~~~
drivers/thunderbolt/xdomain.c:448:51: note: while referencing 'res'
448 | struct tb_xdp_properties_changed_response res;
| ^~~
Add union containing struct tb_xdp_error_response to structures passed
to tb_xdp_handle_error(), so that the "error" field will be present.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
SM8450 UFS seems to use same sequence as SM8350, so reuse the sequence
from SM8450. Add the new clock list for this phy and the new compatible
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211201074456.3969849-4-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document "qcom,sm8450-ufshc" compatible string. "qcom,sm8450-ufshc" is
for UFS HC found in SM8450 SoC.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211201074456.3969849-2-vkoul@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fixes the following W=1 kernel build warning:
drivers/net/wireless/intel/iwlwifi/mvm/rfi.c:11: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
[removed the static const fix, since it's already done and
updated the commit message accordingly.]
Link: https://lore.kernel.org/r/20210517050141.61488-7-shenyang39@huawei.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Add a new helper to deal with the swiotlb case. This keeps the code
nicely boundled and removes the not required call to
dma_direct_optimal_gfp_mask for the swiotlb case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
swiotlb_alloc and swiotlb_free are properly stubbed out if
CONFIG_DMA_RESTRICTED_POOL is not set, so skip the extra checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Instead of blindly running into a blocking operation for a non-blocking gfp,
return NULL and spew an error. Note that Kconfig prevents this for all
currently relevant platforms, and this is just a debug check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
If the architecture can't remap or set an address uncached there is no way
to fullfill a request for a coherent allocation. Return NULL in that case.
Note that this case currently does not happen, so this is a theoretical
fixup and/or a preparation for eventually supporting platforms that
can't support coherent allocations with the generic code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Add a big central !dev_is_dma_coherent(dev) block to deal with as much
as of the uncached allocation schemes and document the schemes a bit
better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Split the code for DMA_ATTR_NO_KERNEL_MAPPING allocations into a separate
helper to make dma_direct_alloc a little more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: David Rientjes <rientjes@google.com>
Add two local variables to track if we want to remap the returned
address using vmap or call dma_set_uncached and use that to simplify
the code flow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
We must never let unencrypted memory go back into the general page pool.
So if we fail to set it back to encrypted when freeing DMA memory, leak
the memory instead and warn the user.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Remapped allocations handle the encrypted bit through the pgprot passed
to vmap, so there is no call dma_set_decrypted. Note that this case is
currently entirely theoretical as no valid kernel configuration supports
remapped allocations and memory encryption currently.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Factor out helpers the make dealing with memory encryption a little less
cumbersome.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
After the commit 34570a898e ("platform/x86: hp_accel: Remove
_INI method call") there is no need to have separate methods for
resume and restore, hence we may fold them together and use
SIMPLE_DEV_PM_OPS() for PM ops.
While at it, switch to use __maybe_unused attribute.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211206151521.22578-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Since the Surface XBL Driver does not depend on ACPI, the
platform/surface directory as a whole no longer depends on ACPI. With
respect to this, the ACPI dependency is moved into each config that depends
on ACPI individually.
Signed-off-by: Jarrett Schultz <jaschultz@microsoft.com>
Link: https://lore.kernel.org/r/20211202191630.12450-3-jaschultz@microsoft.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On the back of the device there is a Hall sensor connected to the
"INT33FF:02" GPIO controller pin 18, which gets triggered when the
device is fully folded into tablet-mode (when the back of the display
touches the back of the keyboard).
Use this to disable both the touch-keyboard and the digitizer when
the tablet is fully folded into tablet-mode.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211128190031.405620-5-hdegoede@redhat.com
Add driver to handle WMI events, control the keyboard backlight and
bind/unbind the keyboard-touch / digitizer driver so that only one
is active at a time.
It may seem a bit weird to handle the toggling of the modes in the
kernel, but the hw actually expects only 1 device to be active
at a time.
Changes by Hans de Goede:
- Whole bunch of cleanups
- Make the kernel do the driver bind/unbind itself instead of
sending events to userspace and requiring a special userspace
daemon to deal with this
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211128190031.405620-4-hdegoede@redhat.com
In iwl_txq_dyn_alloc_dma, txq->tfds is freed at first time by:
iwl_txq_alloc()->goto err_free_tfds->dma_free_coherent(). But
it forgot to set txq->tfds to NULL.
Then the txq->tfds is freed again in iwl_txq_dyn_alloc_dma by:
goto error->iwl_txq_gen2_free_memory()->dma_free_coherent().
My patch sets txq->tfds to NULL after the first free to avoid the
double free.
Fixes: 0cd1ad2d7f ("iwlwifi: move all bus-independent TX functions to common code")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Link: https://lore.kernel.org/r/20210403054755.4781-1-lyl2019@mail.ustc.edu.cn
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Smatch spot a possible NULL pointer dereference. Fix it.
__iwl_mvm_mac_set_key can be called with sta = NULL
Also add a NULL pointer check after memory allocation.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20211130105951.85539-1-emmanuel.grumbach@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If CSME is compromised, it could report a bigger queue size
in the share area and make the host perform an out of bound
access.
Instead of reading the size of the queue from the shared area,
store it in the regular context which is not accessible by CSME.
While at it, fix a small typo in an error print.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20211128121509.3952-1-emmanuel.grumbach@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Use DEVICE_ATTR_RO() helper macro instead of DEVICE_ATTR(), which is
simpler and more readable.
Due to the name of the read function of the sysfs attribute is normalized,
there is a natural association.
Link: https://lore.kernel.org/linux-media/20210603071009.11438-1-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Using stack-allocated pointers for USB message data don't work.
This driver is almost OK with that, except for the I2C read
logic.
Fix it by using a temporary read buffer, just like on all other
calls to m920x_read().
Link: https://lore.kernel.org/all/ccc99e48-de4f-045e-0fe4-61e3118e3f74@mida.se/
Reported-by: rkardell@mida.se
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
An spi remove callback is never called with an spi_device pointer that
is NULL. Also it is only called for devices that probed successfully. As
cxd2880_spi_probe() always sets driver data, spi_get_drvdata() cannot be
NULL.
Also the return value of spi remove callbacks is ignored anyway and not
freeing resources in .remove() is a bad idea.
Link: https://lore.kernel.org/linux-media/20211012153945.2651412-8-u.kleine-koenig@pengutronix.de
Cc: Mark Brown <broonie@kernel.org>, kernel@pengutronix.de, linux-media@vger.kernel.org, linux-spi@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If disabling the hardware fails the driver propagates the error code to
the i2c core. However this only results in a generic error message; the
device still disappears.
So instead emit a message that better describes the actual problem than
the i2c core's "remove failed (ESOMETHING), will be ignored" and return
0 to suppress the generic message.
Link: https://lore.kernel.org/linux-media/20211026194010.109029-1-u.kleine-koenig@pengutronix.de
Cc: linux-media@vger.kernel.org, kernel@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The module currently prints only "Rafael Micro r820t successfully
identified" when successfully loaded, which might be misleading as the
module actually supports various chip types.
Link: https://lore.kernel.org/linux-media/20211119234401.271193-1-dkk089@gmail.com
Cc: linux-kernel@vger.kernel.org, Daniel Kamil Kozar <dkk089@gmail.com>
Signed-off-by: Daniel Kamil Kozar <dkk089@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit e955f959ac ("media: si2157: Better check for running tuner in
init") completely broke the "warm" tuner detection of the si2157 driver
due to a simple endian error: The Si2157 CRYSTAL_TRIM property code is
0x0402 and needs to be transmitted LSB first. However, it was inserted
MSB first, causing the warm detection to always fail and spam the kernel
log with tuner initialization messages each time the DVB frontend
device was closed and reopened:
[ 312.215682] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 312.264334] si2157 16-0060: firmware version: 3.0.5
[ 342.248593] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 342.295743] si2157 16-0060: firmware version: 3.0.5
[ 372.328574] si2157 16-0060: found a 'Silicon Labs Si2157-A30'
[ 372.385035] si2157 16-0060: firmware version: 3.0.5
Also, the reinitializations were observed disturb _other_ tuners on
multi-tuner cards such as the Hauppauge WinTV-QuadHD, leading to missed
or errored packets when one of the other DVB frontend devices on that
card was opened.
Fix the order of the property code bytes to make the warm detection work
again, also reducing the tuner initialization message in the kernel log
to once per power-on, as well as fixing the interference with other
tuners.
Link: https://lore.kernel.org/linux-media/trinity-2a86eb9d-6264-4387-95e1-ba7b79a4050f-1638392923493@3c-app-gmx-bap03
Fixes: e955f959ac ("media: si2157: Better check for running tuner in init")
Reported-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The beginning part of the "existing HSV/HSL formats" table (line 7742)
reads:
.. raw:: latex
\begingroup
\tiny
\setlength{\tabcolsep}{2pt}
However, the ending part (line 7834) reads:
.. raw:: latex
\normalsize
Fix the imbalance by replacing the \normalsize with \endgroup.
Note:
Actually, the imbalance is harmless and just results in an
informative message near the bottom of userspace-api.log:
(\end occurred inside a group at level 1)
### semi simple group (level 1) entered at line 70696 (\begingroup)
### bottom level
Link: https://lore.kernel.org/linux-media/b3eeec4d-1a34-0a1a-3097-1ddea3b5f1c8@gmail.com
Signed-off-by: Akira Yokosawa <akiyks@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Don't populate the array idx_map on the stack but instead make it
static const. Also makes the object code smaller by 16 bytes.
Link: https://lore.kernel.org/linux-media/20211129230626.549090-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In function vb2_set_plane_payload, report if the given bytesused is
bigger than the buffer size, and clamp it to the buffer size.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In many places the bytesused field of struct vb2_buffer is set
directly. Replace that with the function call
vb2_set_plane_payload
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cec_devnode struct has a lock meant to serialize access
to the fields of this struct. This lock is taken during
device node (un)registration and when opening or releasing a
filehandle to the device node. When the last open filehandle
is closed the cec adapter might be disabled by calling the
adap_enable driver callback with the devnode.lock held.
However, if during that callback a message or event arrives
then the driver will call one of the cec_queue_event()
variants in cec-adap.c, and those will take the same devnode.lock
to walk the open filehandle list.
This obviously causes a deadlock.
This is quite easy to reproduce with the cec-gpio driver since that
uses the cec-pin framework which generated lots of events and uses
a kernel thread for the processing, so when adap_enable is called
the thread is still running and can generate events.
But I suspect that it might also happen with other drivers if an
interrupt arrives signaling e.g. a received message before adap_enable
had a chance to disable the interrupts.
This patch adds a new mutex to serialize access to the fhs list.
When adap_enable() is called the devnode.lock mutex is held, but
not devnode.lock_fhs. The event functions in cec-adap.c will now
use devnode.lock_fhs instead of devnode.lock, ensuring that it is
safe to call those functions from the adap_enable callback.
This specific issue only happens if the last open filehandle is closed
and the physical address is invalid. This is not something that
happens during normal operation, but it does happen when monitoring
CEC traffic (e.g. cec-ctl --monitor) with an unconfigured CEC adapter.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v5.13 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
