Add KUNIT_ASSERT_NOT_ERR_OR_NULL(test, buf) for every test.
Also use ARRAY_SIZE(values) where it is possible.
Signed-off-by: Andriy Tryshnivskyy <andriy.tryshnivskyy@opensynergy.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211105100501.1904-2-andriy.tryshnivskyy@opensynergy.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The shared parameter should be configurable based on its usage, and not
constrained to IIO_SHARED_BY_TYPE.
This patch aims to improve the flexibility in using the
IIO_ENUM_AVAILABLE define and avoid redefining custom iio enums that
expose the shared parameter.
An example is the ad5766.c driver where IIO_ENUM_AVAILABLE_SHARED was
defined in order to achieve `shared` parameter customization.
The current state of the IIO_ENUM_AVAILABLE implementation will imply
similar redefinitions each time a driver will require access to the
`shared` parameter. An example would be admv1013 driver which will
require custom device attribute for the frequency translation modes:
Quadrature I/Q mode and Intermediate Frequency mode.
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211119085627.6348-1-antoniu.miclaus@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
dev_err_probe() calls __device_set_deferred_probe_reason()
on -EPROBE_DEFER error. If device pointer to driver core
private structure is not initialized, an null pointer error occurs.
This pointer is set on iio_device_register() call for iio device.
dev_err_probe() must be called with the device which is probing.
Replace iio device by its parent device.
Fixes: 0e346b2cfa ("iio: adc: stm32-adc: add vrefint calibration support")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20211122143809.2332-1-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We know that the buffer's alignment will always be a power of two;
therefore, we can use the faster round_down() macro.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211115141925.60164-4-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This structure was never used anywhere, so it can safely be dropped.
It will later be re-introduced as a different structure in a
different header.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211115141925.60164-3-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
We got issue as follows:
================================================================================
UBSAN: Undefined behaviour in ./include/linux/ktime.h:42:14
signed integer overflow:
-4966321760114568020 * 1000000000 cannot be represented in type 'long long int'
CPU: 1 PID: 2186 Comm: syz-executor.2 Not tainted 4.19.90+ #12
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78
show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x170/0x1dc lib/dump_stack.c:118
ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161
handle_overflow+0x188/0x1dc lib/ubsan.c:192
__ubsan_handle_mul_overflow+0x34/0x44 lib/ubsan.c:213
ktime_set include/linux/ktime.h:42 [inline]
timespec64_to_ktime include/linux/ktime.h:78 [inline]
io_timeout fs/io_uring.c:5153 [inline]
io_issue_sqe+0x42c8/0x4550 fs/io_uring.c:5599
__io_queue_sqe+0x1b0/0xbc0 fs/io_uring.c:5988
io_queue_sqe+0x1ac/0x248 fs/io_uring.c:6067
io_submit_sqe fs/io_uring.c:6137 [inline]
io_submit_sqes+0xed8/0x1c88 fs/io_uring.c:6331
__do_sys_io_uring_enter fs/io_uring.c:8170 [inline]
__se_sys_io_uring_enter fs/io_uring.c:8129 [inline]
__arm64_sys_io_uring_enter+0x490/0x980 fs/io_uring.c:8129
invoke_syscall arch/arm64/kernel/syscall.c:53 [inline]
el0_svc_common+0x374/0x570 arch/arm64/kernel/syscall.c:121
el0_svc_handler+0x190/0x260 arch/arm64/kernel/syscall.c:190
el0_svc+0x10/0x218 arch/arm64/kernel/entry.S:1017
================================================================================
As ktime_set only judge 'secs' if big than KTIME_SEC_MAX, but if we pass
negative value maybe lead to overflow.
To address this issue, we must check if 'sec' is negative.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20211118015907.844807-1-yebin10@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The message printed when nomodeset is present in the kernel command line
makes it look as if the parameter must never be used and it's a bad idea.
But there are valid reasons to use this parameter and the message should
not imply otherwise. Change the text to be more accurate and restrained.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-7-javierm@redhat.com
The nomodeset kernel command line parameter is not documented. Its name
is quite vague and is not intuitive what's the behaviour when it is set.
Document in kernel-parameters.txt what actually happens when nomodeset
is used. That way, users could know if they want to enable this option.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-6-javierm@redhat.com
This relationship was only for historical reasons and the nomodeset option
should be available even on platforms that don't enable CONFIG_VGA_CONSOLE.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-5-javierm@redhat.com
The "nomodeset" kernel cmdline parameter is handled by the vgacon driver
but the exported vgacon_text_force() symbol is only used by DRM drivers.
It makes much more sense for the parameter logic to be in the subsystem
of the drivers that are making use of it.
Let's move the vgacon_text_force() function and related logic to the DRM
subsystem. While doing that, rename it to drm_firmware_drivers_only() and
make it return true if "nomodeset" was used and false otherwise. This is
a better description of the condition that the drivers are testing for.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-4-javierm@redhat.com
It is already handled by the console.h macro since a stub inline function
is defined for vgacon_text_force() if CONFIG_VGA_CONSOLE is not set.
There's no need to have ifdefery in the driver when calling the function.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-3-javierm@redhat.com
The nomodeset kernel parameter handler already prints a message that the
DRM drivers will be disabled, so there's no need for drivers to do that.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112133230.1595307-2-javierm@redhat.com
When possible using dev_err_probe() helps to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211105071509.969-1-caihuoqing@baidu.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When kernel.h is used in the headers it adds a lot into dependency hell,
especially when there are circular dependencies are involved.
Replace kernel.h inclusion with the list of what is really being used.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211110103128.59888-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kuniyuki Iwashima says:
====================
af_unix: Replace unix_table_lock with per-hash locks.
The hash table of AF_UNIX sockets is protected by a single big lock,
unix_table_lock. This series replaces it with small per-hash locks.
1st - 2nd : Misc refactoring
3rd - 8th : Separate BSD/abstract address logics
9th - 11th : Prep to save a hash in each socket
12th : Replace the big lock
13th : Speed up autobind()
Note to maintainers:
The 12th patch adds two kinds of Sparse warnings on patchwork:
about unix_table_double_lock/unlock()
We can avoid this by adding two apparent acquires/releases annotations,
but there are the same kinds of warnings about unix_state_double_lock().
about unix_next_socket() and unix_seq_stop() (/proc/net/unix)
This is because Sparse does not understand logic in unix_next_socket(),
which leaves a spin lock held until it returns NULL.
Also, tcp_seq_stop() causes a warning for the same reason.
These warnings seem reasonable, but let me know if there is any better way.
Please see [0] for details.
[0]: https://lore.kernel.org/netdev/20211117001611.74123-1-kuniyu@amazon.co.jp/
====================
Link: https://lore.kernel.org/r/20211124021431.48956-1-kuniyu@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we bind an AF_UNIX socket without a name specified, the kernel selects
an available one from 0x00000 to 0xFFFFF. unix_autobind() starts searching
from a number in the 'static' variable and increments it after acquiring
two locks.
If multiple processes try autobind, they obtain the same lock and check if
a socket in the hash list has the same name. If not, one process uses it,
and all except one end up retrying the _next_ number (actually not, it may
be incremented by the other processes). The more we autobind sockets in
parallel, the longer the latency gets. We can avoid such a race by
searching for a name from a random number.
These show latency in unix_autobind() while 64 CPUs are simultaneously
autobind-ing 1024 sockets for each.
Without this patch:
usec : count distribution
0 : 1176 |*** |
2 : 3655 |*********** |
4 : 4094 |************* |
6 : 3831 |************ |
8 : 3829 |************ |
10 : 3844 |************ |
12 : 3638 |*********** |
14 : 2992 |********* |
16 : 2485 |******* |
18 : 2230 |******* |
20 : 2095 |****** |
22 : 1853 |***** |
24 : 1827 |***** |
26 : 1677 |***** |
28 : 1473 |**** |
30 : 1573 |***** |
32 : 1417 |**** |
34 : 1385 |**** |
36 : 1345 |**** |
38 : 1344 |**** |
40 : 1200 |*** |
With this patch:
usec : count distribution
0 : 1855 |****** |
2 : 6464 |********************* |
4 : 9936 |******************************** |
6 : 12107 |****************************************|
8 : 10441 |********************************** |
10 : 7264 |*********************** |
12 : 4254 |************** |
14 : 2538 |******** |
16 : 1596 |***** |
18 : 1088 |*** |
20 : 800 |** |
22 : 670 |** |
24 : 601 |* |
26 : 562 |* |
28 : 525 |* |
30 : 446 |* |
32 : 378 |* |
34 : 337 |* |
36 : 317 |* |
38 : 314 |* |
40 : 298 | |
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To replace unix_table_lock with per-hash locks in the next patch, we need
to save a hash in each socket because /proc/net/unix or BPF prog iterate
sockets while holding a hash table lock and release it later in a different
function.
Currently, we store a real/pseudo hash in struct unix_address. However, we
do not allocate it to unbound sockets, nor should we do just for that. For
this purpose, we can use sk_hash. Then, we no longer use the hash field in
struct unix_address and can remove it.
Also, this patch does
- rename unix_insert_socket() to unix_insert_unbound_socket()
- remove the redundant list argument from __unix_insert_socket() and
unix_insert_unbound_socket()
- use 'unsigned int' instead of 'unsigned' in __unix_set_addr_hash()
- remove 'inline' from unix_remove_socket() and
unix_insert_unbound_socket().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds three helper functions that calculate hashes for unbound
sockets and bound sockets with BSD/abstract addresses.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In BSD and abstract address cases, we store sockets in the hash table with
keys between 0 and UNIX_HASH_SIZE - 1. However, the hash saved in a socket
varies depending on its address type; sockets with BSD addresses always
have UNIX_HASH_SIZE in their unix_sk(sk)->addr->hash.
This is just for the UNIX_ABSTRACT() macro used to check the address type.
The difference of the saved hashes comes from the first byte of the address
in the first place. So, we can test it directly.
Then we can keep a real hash in each socket and replace unix_table_lock
with per-hash locks in the later patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To terminate address with '\0' in unix_bind_bsd(), we add
unix_create_addr() and call it in unix_bind_bsd() and unix_bind_abstract().
Also, unix_bind_abstract() does not return -EEXIST. Only
kern_path_create() and vfs_mknod() in unix_bind_bsd() can return it,
so we move the last error check in unix_bind() to unix_bind_bsd().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch removes unix_mkname() and postpones calculating a hash to
unix_bind_abstract(). Some BSD stuffs still remain in unix_bind()
though, the next patch packs them into unix_bind_bsd().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We should not call unix_mkname() before unix_find_other() and instead do
the same thing where necessary based on the address type:
- terminating the address with '\0' in unix_find_bsd()
- calculating the hash in unix_find_abstract().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
unix_mkname() tests socket address length and family and does some
processing based on the address type. It is called in the early stage,
and therefore some instructions are redundant and can end up in vain.
The address length/family tests are done twice in unix_bind(). Also, the
address type is rechecked later in unix_bind() and unix_find_other(), where
we can do the same processing. Moreover, in the BSD address case, the hash
is set to 0 but never used and confusing.
This patch moves the address tests out of unix_mkname(), and the following
patches move the other part into appropriate places and remove
unix_mkname() finally.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can return an error as a pointer and need not pass an additional
argument to unix_find_other().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As done in the commit fa42d910a3 ("unix_bind(): take BSD and abstract
address cases into new helpers"), this patch moves BSD and abstract address
cases from unix_find_other() into unix_find_bsd() and unix_find_abstract().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We do not use struct socket in unix_autobind() and pass struct sock to
unix_bind_bsd() and unix_bind_abstract(). Let's pass it to unix_autobind()
as well.
Also, this patch fixes these errors by checkpatch.pl.
ERROR: do not use assignment in if condition
#1795: FILE: net/unix/af_unix.c:1795:
+ if (test_bit(SOCK_PASSCRED, &sock->flags) && !u->addr
CHECK: Logical continuations should be on the previous line
#1796: FILE: net/unix/af_unix.c:1796:
+ if (test_bit(SOCK_PASSCRED, &sock->flags) && !u->addr
+ && (err = unix_autobind(sock)) != 0)
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The length of the AF_UNIX socket address contains an offset to the member
sun_path of struct sockaddr_un.
Currently, the preceding member is just sun_family, and its type is
sa_family_t and resolved to short. Therefore, the offset is represented by
sizeof(short). However, it is not clear and fragile to changes in struct
sockaddr_storage or sockaddr_un.
This commit makes it clear and robust by rewriting sizeof() with
offsetof().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge series from Kai Vehmanen <kai.vehmanen@linux.intel.com>:
Implement an updated programming sequence to handle DMA stop for Intel
HD-Audio DMA.
The new flow is only used if the firmware is sufficiently new to
support the feature. SOF1.9.2 is the first release with the updated
flow. The kernel changes are backwards compatible with old firmware
releases. Likewise new firmware releases will work with old kernel.
Series reviewed originally at:
https://github.com/thesofproject/linux/pull/3167
Merge series from Sameer Pujar <spujar@nvidia.com>:
This series addresses following problems:
* The runtime PM is not balanced in MVC driver, whenever
mute or volume mixer controls are set.
* Some of the AHUB devices (SFC, MVC, Mixer, AMX and ADX)
use late system sleep. Suspend failure is seen on Jetson
TX2 platform.
The netdev (e.g. ifb, bareudp), which not support ethtool ops
(e.g. .get_drvinfo), we can use the rtnl kind as a default name.
ifb netdev may be created by others prefix, not ifbX.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Hao Chen <chenhao288@hisilicon.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Danielle Ratson <danieller@nvidia.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20211125163049.84970-1-xiangxia.m.yue@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov says:
====================
selftests: net: bridge: vlan multicast tests
This patch-set adds selftests for the new vlan multicast options that
were recently added. Most of the tests check for default values,
changing options and try to verify that the changes actually take
effect. The last test checks if the dependency between vlan_filtering
and mcast_vlan_snooping holds. The rest are pretty self-explanatory.
TEST: Vlan multicast snooping enable [ OK ]
TEST: Vlan global options existence [ OK ]
TEST: Vlan mcast_snooping global option default value [ OK ]
TEST: Vlan 10 multicast snooping control [ OK ]
TEST: Vlan mcast_querier global option default value [ OK ]
TEST: Vlan 10 multicast querier enable [ OK ]
TEST: Vlan 10 tagged IGMPv2 general query sent [ OK ]
TEST: Vlan 10 tagged MLD general query sent [ OK ]
TEST: Vlan mcast_igmp_version global option default value [ OK ]
TEST: Vlan mcast_mld_version global option default value [ OK ]
TEST: Vlan 10 mcast_igmp_version option changed to 3 [ OK ]
TEST: Vlan 10 tagged IGMPv3 general query sent [ OK ]
TEST: Vlan 10 mcast_mld_version option changed to 2 [ OK ]
TEST: Vlan 10 tagged MLDv2 general query sent [ OK ]
TEST: Vlan mcast_last_member_count global option default value [ OK ]
TEST: Vlan mcast_last_member_interval global option default value [ OK ]
TEST: Vlan 10 mcast_last_member_count option changed to 3 [ OK ]
TEST: Vlan 10 mcast_last_member_interval option changed to 200 [ OK ]
TEST: Vlan mcast_startup_query_interval global option default value [ OK ]
TEST: Vlan mcast_startup_query_count global option default value [ OK ]
TEST: Vlan 10 mcast_startup_query_interval option changed to 100 [ OK ]
TEST: Vlan 10 mcast_startup_query_count option changed to 3 [ OK ]
TEST: Vlan mcast_membership_interval global option default value [ OK ]
TEST: Vlan 10 mcast_membership_interval option changed to 200 [ OK ]
TEST: Vlan 10 mcast_membership_interval mdb entry expire [ OK ]
TEST: Vlan mcast_querier_interval global option default value [ OK ]
TEST: Vlan 10 mcast_querier_interval option changed to 100 [ OK ]
TEST: Vlan 10 mcast_querier_interval expire after outside query [ OK ]
TEST: Vlan mcast_query_interval global option default value [ OK ]
TEST: Vlan 10 mcast_query_interval option changed to 200 [ OK ]
TEST: Vlan mcast_query_response_interval global option default value [ OK ]
TEST: Vlan 10 mcast_query_response_interval option changed to 200 [ OK ]
TEST: Port vlan 10 option mcast_router default value [ OK ]
TEST: Port vlan 10 mcast_router option changed to 2 [ OK ]
TEST: Flood unknown vlan multicast packets to router port only [ OK ]
TEST: Disable multicast vlan snooping when vlan filtering is disabled [ OK ]
====================
Link: https://lore.kernel.org/r/20211125140858.3639139-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test for dependency of mcast_vlan_snooping on vlan_filtering. If
vlan_filtering gets disabled, then mcast_vlan_snooping must be
automatically disabled as well.
TEST: Disable multicast vlan snooping when vlan filtering is disabled [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests for the new per-port/vlan mcast_router option, verify that
unknown multicast packets are flooded only to router ports.
TEST: Port vlan 10 option mcast_router default value [ OK ]
TEST: Port vlan 10 mcast_router option changed to 2 [ OK ]
TEST: Flood unknown vlan multicast packets to router port only [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests which change the new per-vlan mcast_query_interval and verify
the new value is in effect, also add a test to change
mcast_query_response_interval's value.
TEST: Vlan mcast_query_interval global option default value [ OK ]
TEST: Vlan 10 mcast_query_interval option changed to 200 [ OK ]
TEST: Vlan mcast_query_response_interval global option default value [ OK ]
TEST: Vlan 10 mcast_query_response_interval option changed to 200 [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests which change the new per-vlan mcast_querier_interval and
verify that it is taken into account when an outside querier is present.
TEST: Vlan mcast_querier_interval global option default value [ OK ]
TEST: Vlan 10 mcast_querier_interval option changed to 100 [ OK ]
TEST: Vlan 10 mcast_querier_interval expire after outside query [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test which changes the new per-vlan mcast_membership_interval and
verifies that a newly learned mdb entry would expire in that interval.
TEST: Vlan mcast_membership_interval global option default value [ OK ]
TEST: Vlan 10 mcast_membership_interval option changed to 200 [ OK ]
TEST: Vlan 10 mcast_membership_interval mdb entry expire [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests which change the new per-vlan startup query count/interval
options and verify the proper number of queries are sent in the expected
interval.
TEST: Vlan mcast_startup_query_interval global option default value [ OK ]
TEST: Vlan mcast_startup_query_count global option default value [ OK ]
TEST: Vlan 10 mcast_startup_query_interval option changed to 100 [ OK ]
TEST: Vlan 10 mcast_startup_query_count option changed to 3 [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests which verify the default values of mcast_last_member_count
mcast_last_member_count and also try to change them.
TEST: Vlan mcast_last_member_count global option default value [ OK ]
TEST: Vlan mcast_last_member_interval global option default value [ OK ]
TEST: Vlan 10 mcast_last_member_count option changed to 3 [ OK ]
TEST: Vlan 10 mcast_last_member_interval option changed to 200 [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests which change the new per-vlan IGMP/MLD versions and verify
that proper tagged general query packets are sent.
TEST: Vlan mcast_igmp_version global option default value [ OK ]
TEST: Vlan mcast_mld_version global option default value [ OK ]
TEST: Vlan 10 mcast_igmp_version option changed to 3 [ OK ]
TEST: Vlan 10 tagged IGMPv3 general query sent [ OK ]
TEST: Vlan 10 mcast_mld_version option changed to 2 [ OK ]
TEST: Vlan 10 tagged MLDv2 general query sent [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test to try the new global vlan mcast_querier control and also
verify that tagged general query packets are properly generated when
querier is enabled for a single vlan.
TEST: Vlan mcast_querier global option default value [ OK ]
TEST: Vlan 10 multicast querier enable [ OK ]
TEST: Vlan 10 tagged IGMPv2 general query sent [ OK ]
TEST: Vlan 10 tagged MLD general query sent [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the first test for bridge per-vlan multicast snooping which checks
if control of the global and per-vlan options work as expected, joins
and leaves are tested at each option value.
TEST: Vlan multicast snooping enable [ OK ]
TEST: Vlan global options existence [ OK ]
TEST: Vlan mcast_snooping global option default value [ OK ]
TEST: Vlan 10 multicast snooping control [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 3fe59cc4ff.
The bindings were not properly reviewed and were also
causing errors in the automatic checkers once applied.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If of_property_count_u32_elems returned 0, return -EINVAL to indicate
a failure. Previously this would return 0.
Fixes: a0f160ffcb ("pinctrl: add pinctrl/GPIO driver for Apple SoCs")
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-12-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The gpio core code sets of_node, so no need to do it here.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-10-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Having this missing, but everything else valid shouldn't result
in a failure.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-9-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
