This patch add police action to set flow meter table which is defined
in IEEE802.1Qci. Flow metering is two rates two buckets and three color
marker to policing the frames, we only enable one rate one bucket in
this patch.
Flow metering shares a same policer pool with VCAP policers, so the PSFP
policer calls ocelot_vcap_policer_add() and ocelot_vcap_policer_del() to
set flow meter police.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Policer was previously automatically assigned from the highest index to
the lowest index from policer pool. But police action of tc flower now
uses index to set an police entry. This patch uses the police index to
set vcap policers, so that one policer can be shared by multiple rules.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds stream gate settings for PSFP. Use SGI table to store
stream gate entries. Disable the gate entry when it is not used by any
stream.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
VSC9959 supports Per-Stream Filtering and Policing(PSFP) that complies
with the IEEE 802.1Qci standard. The stream is identified by Null stream
identification(DMAC and VLAN ID) defined in IEEE802.1CB.
For PSFP, four tables need to be set up: stream table, stream filter
table, stream gate table, and flow meter table. Identify the stream by
parsing the tc flower keys and add it to the stream table. The stream
filter table is automatically maintained, and its index is determined by
SGID(flow gate index) and FMID(flow meter index).
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
PSFP support gate and police action. This patch add the gate and police
action to flower parse action, check chain ID to determine which block
to offload. Adding psfp callback functions to add, delete and update gate
and police in PSFP table if hardware supports it.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some chips in the ocelot series such as VSC9959 support Per-Stream
Filtering and Policing(PSFP), which is processing after VCAP blocks.
We set this block on chain 30000 and set vcap IS2 chain to goto PSFP
chain if hardware support.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ocelot_mact_learn_streamdata() can be used in VSC9959 to overwrite an
FDB entry with stream data. The stream data includes SFID and SSID which
can be used for PSFP and FRER set.
ocelot_mact_lookup() can be used to check if the given {DMAC, VID} FDB
entry is exist, and also can retrieve the DEST_IDX and entry type for
the FDB entry.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since tlb flush has been done for legacy MMU before
kvm_tdp_mmu_zap_collapsible_sptes(), so the parameter flush
should be false for kvm_tdp_mmu_zap_collapsible_sptes().
Fixes: e2209710cc ("KVM: x86/mmu: Skip rmap operations if rmaps not allocated")
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Message-Id: <21453a1d2533afb6e59fb6c729af89e771ff2e76.1637140154.git.houwenlong93@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the parameter flush is set, zap_gfn_range() would flush remote tlb
when yield, then tlb flush is not needed outside. So use the return
value of zap_gfn_range() directly instead of OR on it in
kvm_unmap_gfn_range() and kvm_tdp_mmu_unmap_gfn_range().
Fixes: 3039bcc744 ("KVM: Move x86's MMU notifier memslot walkers to generic code")
Signed-off-by: Hou Wenlong <houwenlong93@linux.alibaba.com>
Message-Id: <5e16546e228877a4d974f8c0e448a93d52c7a5a9.1637140154.git.houwenlong93@linux.alibaba.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit f52447261b ("KVM: irq ack notification") introduced an
ack_notifier() callback in struct kvm_pic and in struct kvm_ioapic
without using them anywhere. Remove those callbacks again.
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-Id: <20211117071617.19504-1-jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The definition of macro MOTO_SROM_BUG is:
#define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32(
dev->dev_addr) & 0x00ffffff) == 0x3e0008)
and the if statement
if (MOTO_SROM_BUG) lp->active = 0;
using this macro indicates lp->active could be 8. If lp->active is 8 and
the second comparison of this macro is false. lp->active will remain 8 in:
lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2;
lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2;
lp->phy[lp->active].mci = *p;
However, the length of array lp->phy is 8, so array overflows can occur.
To fix these possible array overflows, we first check lp->active and then
return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8).
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
In 99ce45d5e, we moved a route refcount decrement from
mctp_do_fragment_route into the caller. This invalidates the assumption
that the route test makes about refcount behaviour, so the route tests
fail.
This change fixes the test case to suit the new refcount behaviour.
Fixes: 99ce45d5e7 ("mctp: Implement extended addressing")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid
opencoding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yao Jing <yao.jing2@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the
'for' end, the 'k' is 8.
At this time, the array 'lp->phy[8]' may be out of bound.
Signed-off-by: zhangyue <zhangyue1@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing entries to fix these "make htmldocs" warnings.
./include/linux/skbuff.h:953: warning: Function parameter or member 'll_node' not described in 'sk_buff'
./include/net/sock.h:540: warning: Function parameter or member 'defer_list' not described in 'sock'
Fixes: f35f821935 ("tcp: defer skb freeing after socket lock is released")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
In intel_dsi_get_config() double the pclk returned by foo_dsi_get_pclk()
for dual-link panels. This fixes the following WARN triggering:
i915 0000:00:02.0: [drm] *ERROR* [CRTC:51:pipe A] mismatch in pixel_rate (expected 235710, found 118056)
i915 0000:00:02.0: [drm] *ERROR* [CRTC:51:pipe A] mismatch in hw.pipe_mode.crtc_clock (expected 235710, found 118056)
i915 0000:00:02.0: [drm] *ERROR* [CRTC:51:pipe A] mismatch in hw.adjusted_mode.crtc_clock (expected 235710, found 118056)
i915 0000:00:02.0: [drm] *ERROR* [CRTC:51:pipe A] mismatch in port_clock (expected 235710, found 118056)
------------[ cut here ]------------
pipe state doesn't match!
WARNING: CPU: 3 PID: 136 at drivers/gpu/drm/i915/display/intel_display.c:9125 intel_display_finish_reset+0x1bd3/0x2050 [i915]
...
This has been tested on a Xiaomi Mi Pad 2 (with CHT x5-Z8500 SoC) tablet,
with a 1536x2048 dual-link DSI panel.
Note this fix was taken from icl_dsi.c which does the same in
its get_config().
Cc: Tsuchiya Yuto <kitakar@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211024155020.126328-1-hdegoede@redhat.com
Tony Nguyen says:
====================
10GbE Intel Wired LAN Driver Updates 2021-11-17
Radoslaw Tyl says:
The change is a consequence of errors reported by the ixgbevf driver
while starting several virtual guests at the same time on ESX host.
During this, VF was not able to communicate correctly with the PF,
as a result reported "PF still in reset state. Is the PF interface up?"
and then goes to locked state. The only thing left was to reload
the VF driver on the guest OS.
The background of the problem is that the current PFU and VFU
semaphore locking mechanism between sender and receiver may cause
overriding Mailbox memory (VFMBMEM), in such scenario receiver of
the original message will read the invalid, corrupted or one (or more)
message may be lost.
This change is actually as a support for communication with PF ESX
driver and does not contains changes and support for ixgbe driver.
For maintain backward compatibility, previous communication method
has been preserved in the form of LEGACY functions.
In the future there is a plan to add a support for a 1.5 mailbox API
communication also to ixgbe driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-11-17
This series contains updates to i40e driver only.
Eryk adds accounting for VLAN header in packet size when VF port VLAN is
configured. He also fixes TC queue distribution when the user has changed
queue counts as well as for configuration of VF ADQ which caused dropped
packets.
Michal adds tracking for when a VSI is being released to prevent null
pointer dereference when managing filters.
Karen ensures PF successfully initiates VF requested reset which could
cause a call trace otherwise.
Jedrzej moves validation of channel queue value earlier to prevent
partial configuration when the value is invalid.
Grzegorz corrects the reported error when adding filter fails.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Killing the kernel because a certain MDIO bus object is not in the
desired state at various points in the registration or unregistration
paths is excessive and is not helping in troubleshooting or fixing
issues. Replace the BUG_ON() with WARN() and print out the MDIO bus name
to facilitate debugging.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The offset value is used in pointer math on skb->data.
Since ipv6_skip_exthdr may return -1 the pointer to uh and th
may not point to the actual udp and tcp headers and potentially
overwrite other stuff. This is why I think this should be checked.
EDIT: added {}'s, thanks Kees
Signed-off-by: Jordy Zomer <jordy@pwning.systems>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported in [1], e100 was no longer working for suspend/resume
cycles. The previous commit mentioned in the fixes appears to have
broken things and this attempts to practice best known methods for
device power management and keep wake-up working while allowing
suspend/resume to work. To do this, I reorder a little bit of code
and fix the resume path to make sure the device is enabled.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=214933
Fixes: 69a74aef8a ("e100: use generic power management")
Cc: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Reported-by: Alexey Kuznetsov <axet@me.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Alexey Kuznetsov <axet@me.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: dpaa2: phylink validate implementation updates
This series converts dpaa2 to fill in the supported_interfaces member
of phylink_config, cleans up the validate() implementation, and then
converts to phylink_generic_validate(). Previous behaviour should be
preserved.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DPAA2 has no special behaviour in its validation implementation, so can
be switched to phylink_generic_validate().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode, nor handle
PHY_INTERFACE_MODE_NA in the validation function. Remove these to
simplify the implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Populate the phy interface mode bitmap for the Freescale DPAA2 driver
with interfaces modes supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
net: ag71xx: phylink validate implementation updates
This series converts ag71xx to fill in the supported_interfaces member
of phylink_config, cleans up the validate() implementation, and then
converts to phylink_generic_validate().
The question over the port linkmode restriction has been answered by
Oleksij - there is no reason for this restriction, so we can go the
whole hog with this conversion. Thanks!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
ag71xx apparently only supports MII port type, which makes it different
from other implementations. However, Oleksij says there is no special
reason for this.
Convert the driver to use phylink_generic_validate(), which will allow
all ethtool port linkmodes instead of only MII, giving the driver
consistent behaviour with other drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode, nor handle
PHY_INTERFACE_MODE_NA in the validation function. Remove these to
simplify the implementation.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Populate the phy_interface_t bitmap for the Atheros ag71xx driver with
interfaces modes supported by the MAC.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mlxsw driver calls to various devlink flash routines even before
users can get any access to the devlink instance itself. For example,
mlxsw_core_fw_rev_validate() one of such functions.
__mlxsw_core_bus_device_register
-> mlxsw_core_fw_rev_validate
-> mlxsw_core_fw_flash
-> mlxfw_firmware_flash
-> mlxfw_status_notify
-> devlink_flash_update_status_notify
-> __devlink_flash_update_notify
-> WARN_ON(...)
It causes to the WARN_ON to trigger warning about devlink not registered.
Fixes: cf53021740 ("devlink: Notify users when objects are accessible")
Reported-by: Danielle Ratson <danieller@nvidia.com>
Tested-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split clocks settings from init callback into clks_config callback,
which could support platform level clock management.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit d00e60ee54.
As reported by Guillaume in [1]:
Enabling LPAE always enables CONFIG_ARCH_DMA_ADDR_T_64BIT
in 32-bit systems, which breaks the bootup proceess when a
ethernet driver is using page pool with PP_FLAG_DMA_MAP flag.
As we were hoping we had no active consumers for such system
when we removed the dma mapping support, and LPAE seems like
a common feature for 32 bits system, so revert it.
1. https://www.spinics.net/lists/netdev/msg779890.html
Fixes: d00e60ee54 ("page_pool: disable dma mapping support for 32-bit arch with 64-bit DMA")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: "kernelci.org bot" <bot@kernelci.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement Opcode support.
This is available on ThinkCenter and ThinkStations platforms and
gives improved password setting capabilities
Add options to configure System, HDD & NVMe passwords.
HDD & NVMe passwords need a user level (user/master) along with
drive index.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20211117184453.2476-2-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The if statement:
if (port >= DSAF_GE_NUM)
return;
limits the value of port less than DSAF_GE_NUM (i.e., 8).
However, if the value of port is 6 or 7, an array overflow could occur:
port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;
because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6).
To fix this possible array overflow, we first check port and if it is
greater than or equal to DSAF_MAX_PORT_NUM, the function returns.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Block devices do not, in general, report congestion any more, so this
congestion_wait() is effectively just a sleep.
It isn't entirely clear what is being waited for, but as we only wait
when j_async_throttle is elevated, it seems reasonable to stop waiting
when j_async_throttle becomes zero - or after the same timeout.
So change to use wait_event_event_timeout() for waiting, and
wake_up_var() to signal an end to waiting.
Link: https://lore.kernel.org/r/163712368225.13692.3419908086400748349@noble.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
The Lenovo Yoga Book X91F/L uses a panel which has been mounted
90 degrees rotated. Add a quirk for this.
Cc: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Simon Ser <contact@emersion.fr>
Tested-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211106130227.11927-1-hdegoede@redhat.com
Newer Lenovo BIOS's have an opcode GUID support interface which provides
- improved password setting control
- ability to set System, hard drive and NVMe passwords
Add the support for these new passwords, and the ability to select
user/master mode and the drive index.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20211117184453.2476-1-markpearson@lenovo.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This reverts commit e4f2006f12.
This patch shows problems with signal handling. Revert it for now.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.15
Building allmodconfig shows errors in the gpu/drm/msm snapdragon drivers,
because a COND() define is used there which conflicts with the COND() for
PA-RISC assembly. Although the snapdragon driver isn't relevant for parisc, it
is nevertheless compiled when CONFIG_COMPILE_TEST is defined.
Move the COND() define and other PA-RISC mnemonics inside the #ifdef
__ASSEMBLY__ part to avoid this conflict.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Include stringify.h to avoid this build error:
arch/parisc/include/asm/jump_label.h: error: expected ':' before '__stringify'
arch/parisc/include/asm/jump_label.h: error: label 'l_yes' defined but not used [-Werror=unused-label]
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Reject userspace memslots whose size exceeds the storage capacity of an
"unsigned long". KVM's uAPI takes the size as u64 to support large slots
on 64-bit hosts, but does not account for the size being truncated on
32-bit hosts in various flows. The access_ok() check on the userspace
virtual address in particular casts the size to "unsigned long" and will
check the wrong number of bytes.
KVM doesn't actually support slots whose size doesn't fit in an "unsigned
long", e.g. KVM's internal kvm_memory_slot.npages is an "unsigned long",
not a "u64", and misc arch specific code follows that behavior.
Fixes: fa3d315a4c ("KVM: Validate userspace_addr of memslot when registered")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <20211104002531.1176691-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When modifying memslots, snapshot the "old" memslot and copy it to the
"new" memslot's arch data after (re)acquiring slots_arch_lock. x86 can
change a memslot's arch data while memslot updates are in-progress so
long as it holds slots_arch_lock, thus snapshotting a memslot without
holding the lock can result in the consumption of stale data.
Fixes: b10a038e84 ("KVM: mmu: Add slots_arch_lock for memslot arch fields")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211104002531.1176691-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When recursively clearing out disconnected pts, the range based TLB
flush in handle_removed_tdp_mmu_page uses the wrong starting GFN,
resulting in the flush mostly missing the affected range. Fix this by
using base_gfn for the flush.
In response to feedback from David Matlack on the RFC version of this
patch, also move a few definitions into the for loop in the function to
prevent unintended references to them in the future.
Fixes: a066e61f13 ("KVM: x86/mmu: Factor out handling of removed page tables")
CC: stable@vger.kernel.org
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211115211704.2621644-1-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It doesn't make sense to return the recommended maximum number of
vCPUs which exceeds the maximum possible number of vCPUs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211116163443.88707-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_CAP_NR_VCPUS is a legacy advisory value which on other architectures
return num_online_cpus() caped by KVM_CAP_NR_VCPUS or something else
(ppc and arm64 are special cases). On s390, KVM_CAP_NR_VCPUS returns
the same as KVM_CAP_MAX_VCPUS and this may turn out to be a bad
'advice'. Switch s390 to returning caped num_online_cpus() too.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-Id: <20211116163443.88707-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
