Fix following coccicheck warning:
./drivers/iio/adc/stm32-adc.c:2014:1-33: WARNING: Function
for_each_available_child_of_node should have of_node_put() before return.
Early exits from for_each_available_child_of_node should decrement the
node reference counter. Replace return by goto here.
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20211021121826.6339-1-wanjiabing@vivo.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In some setups the IRQ signal of the XADC might not be wired to the host
system. The driver currently requires that an interrupt is specified. Make
the interrupt optional so the driver can be used in such setups where the
interrupt is not connected.
Since both the internal triggers as well as events depend on the interrupt
being connected both are not available when the interrupt is not connected.
Buffered access is still supported even without an interrupt since an
external trigger can be used.
The IRQ is only optional when using the AXI interface, since the PCAP
interface needs the IRQ for reading and writing registers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211021125950.28707-1-lars@metafoo.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Whan an i2c driver's remove function returns a non-zero error code
nothing happens apart from emitting a generic error message. Make this
error message more device specific and return zero instead.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211025195007.84541-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
clk_get_rate() is not guaranteed to work if called before
clk_prepare_enable().
Reorder clk_get_rate(), so it's called after clk_prepare_enable() and
after devm_add_action_or_reset() of lpc18xx_clk_disable().
Not that this is not a problem on this particular device, but it is
good to remove a case that might get copied elsewhere.
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: André Gustavo Nakagomi Lopez <andregnl@usp.br>
Link: https://lore.kernel.org/r/YXag5l4xBkGQH3tq@Andryuu.br
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add fennel sku7 and fennel14 sku2, which use different audio codec than
previous fennel/fennel14 boards.
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Link: https://lore.kernel.org/r/20211110063118.3412564-3-hsinyi@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Add callback to notify PSP after loading firmware on DSP. PSP will
validate the loaded firmware and set qualifier bit to run firmware
on secured AMD systems.
Signed-off-by: Julian Schroeder <Julian.Schroeder@amd.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Curtis Malainey <curtis@malainey.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-14-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add trace support and configure trace stream for ACP firmware.
Signed-off-by: Vishnuvardhanrao Ravuapati <vishnuvardhanrao.ravulapati@amd.com>
Signed-off-by: V sujith kumar Reddy <vsreddy@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-13-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new sof dais and config to pass topology file configuration
to SOF firmware running on ACP's DSP core. ACP firmware support
I2S_BT, I2S_SP and DMIC controller hence add three new dais to
the list of supported sof_dais
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-12-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have moved legacy based machine struct into platform driver to
resolve module dependency with non-SOF ALSA build, hence removed
it from acp-config driver module.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-11-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add PCI driver module to enable sof pci device support for Renoir.
If machine flag set to FLAG_SOF_ONLY_DMIC this pci driver register
platform device for non dsp based I2S platform device. If machine
flag is not enabled for SOF pci probe will return without invoking
sof device probe and registration
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-10-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP hw block configuration differs across various distributions
and hence it's required to register different drivers module for
distributions. For now we support three ACP drivers:
* ACP without SOF use case
* ACP with SOF use case
* ACP with SOF use case for DMIC and non SOF for I2S endpoints
As all above driver registers with common PCI ID for ACP hw block
we need code to determine ACP configuration and auto select driver
module. This patch expose function that return configuration flag
based on dmi checks for a system. ACP driver module probe register
platform device based on such configuration flag to avoid conflict
with other ACP drivers probed for same PCI ID.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-8-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add module to support ALSA pcm stream configurations for ACP I2S
and DMIC endpoints
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-7-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dsp ops callback to register I2S and DMIC sof dai's with ALSA
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-6-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add IPC module for generic ACP block and exposed ops callback for
to synchronize SOF IPC message between host and DSP
Signed-off-by: Balakishore Pati <Balakishore.pati@amd.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-5-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add acp-loader module with ops callback to load and run firmware
on ACP DSP block on Renoir platform.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP DMA is used for loading SOF firmware into DSP memory and data
transfer from system memory to DSP memory. Add helper callbacks to
initialize and configure ACP DMA block for fw loading.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch initializes ACP HW block to support SOF on
AMD Renoir platform.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20211117093734.17407-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The two clocks "main-source" and "main-sel" are not present in the
driver and not defined in the binding documentation. Remove them
as they are not used and not described in the documentation.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20211110193520.488-1-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Fix the i2c node names to be compliant to the YAML schema. The
I2C node name should match the following pattern: "^i2c@[0-9a-f]+$".
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20211110194959.20611-4-fparent@baylibre.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
After a non-blocking modeset on a TypeC port's CRTC - possibly blocked
later in drm_atomic_helper_wait_for_dependencies() - a fastset on the
same CRTC may copy the state of CRTC before this gets updated to reflect
the up-to-date DP-alt vs. TBT-alt TypeC mode DPLL used for the CRTC. In
this case after the first (non-blocking) commit completes enabling the
DPLL required for the up-to-date TypeC mode the following fastset will
update the CRTC state pointing to the wrong DPLL. A subsequent disabling
modeset will try to disable the wrong PLL, triggering a state checker
WARN (and leaving the DPLL which is actually used active for good).
Fix the above race by copying the DPLL state for fastset CRTCs from the
old CRTC state at the point where it's guaranteed to be up-to-date
already. This could be handled in the encoder's update_prepare() hook as
well, but that's a bigger change, which is better done as a follow-up.
v2: Copy dpll_hw_state as well. (Ville)
Testcase: igt/kms_busy/extended-modeset-hang-newfb-with-reset
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4308
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211115181121.156197-1-imre.deak@intel.com
This complements the struct power_supply_battery_info with
extensive kerneldoc explaining the different semantics of the
fields, including an overview of the CC/CV charging concepts
implicit in some of the struct members.
This is done to first establish semantics before I can
add more charging methods by breaking out the CC/CV parameters
to its own struct.
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Kyle Huey recently reported[1] that rr gets confused if SIGKILL prevents
ptrace_signal from delivering a signal, as the kernel setups up a signal
frame for a signal that rr did not have a chance to observe with ptrace.
In looking into it I found a couple of bugs and a quality of
implementation issue.
- The test for signal_group_exit should be inside the for loop in get_signal.
- Signals should be requeued on the same queue they were dequeued from.
- When a fatal signal is pending ptrace_signal should not return another
signal for delivery.
Kyle Huey has verified[2] an earlier version of this change.
I have reworked things one more time to completely fix the issues
raised, and to keep the code maintainable long term.
I have smoke tested this code and combined with a careful review I
expect this code to work fine. Kyle if you can double check that
my last round of changes still works for rr I would appreciate it.
Eric W. Biederman (3):
signal: In get_signal test for signal_group_exit every time through the loop
signal: Requeue signals in the appropriate queue
signal: Requeue ptrace signals
fs/signalfd.c | 5 +++--
include/linux/sched/signal.h | 7 ++++---
kernel/signal.c | 44 ++++++++++++++++++++++++++------------------
3 files changed, 33 insertions(+), 23 deletions(-)
[1] https://lkml.kernel.org/r/20211101034147.6203-1-khuey@kylehuey.com
[2] https://lkml.kernel.org/r/CAP045ApAX725ZfujaK-jJNkfCo5s+oVFpBvNfPJk+DKY8K7d=Q@mail.gmail.com
Tested-by: Kyle Huey <khuey@kylehuey.com>
Link: https://lkml.kernel.org/r/87bl2kekig.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The edp_panel_entry members 'delay' and 'name' are documented, but
without the correct syntax for kernel doc.
This generates the following warnings:
drivers/gpu/drm/panel/panel-edp.c:204: warning: Function parameter or member 'delay' not described in 'edp_panel_entry'
drivers/gpu/drm/panel/panel-edp.c:204: warning: Function parameter or member 'name' not described in 'edp_panel_entry'
Fix them accordingly.
Fixes: 5540cf8f3e ("drm/panel-edp: Implement generic "edp-panel"s probed by EDID")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211117163239.529781-1-kieran.bingham+renesas@ideasonboard.com
Through log and waveform, we can see that there will be additional
suspend/resume when booting. This timing does not meet the ps8640 spec.
It seems that the delay of 500ms does not satisfied drm_panel_get_modes.
I increased it to 900ms and it seems that this problem can be solved.
To be safe, I'd just round up to a full 1000.
Signed-off-by: yangcong <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211112084302.2447931-1-yangcong5@huaqin.corp-partner.google.com
The power supply core appears to contain two open coded
linear interpolations. Use the kernel fixpoint arithmetic
interpolation library function instead.
Cc: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Kyle Huey <me@kylehuey.com> writes:
> rr, a userspace record and replay debugger[0], uses the recorded register
> state at PTRACE_EVENT_EXIT to find the point in time at which to cease
> executing the program during replay.
>
> If a SIGKILL races with processing another signal in get_signal, it is
> possible for the kernel to decline to notify the tracer of the original
> signal. But if the original signal had a handler, the kernel proceeds
> with setting up a signal handler frame as if the tracer had chosen to
> deliver the signal unmodified to the tracee. When the kernel goes to
> execute the signal handler that it has now modified the stack and registers
> for, it will discover the pending SIGKILL, and terminate the tracee
> without executing the handler. When PTRACE_EVENT_EXIT is delivered to
> the tracer, however, the effects of handler setup will be visible to
> the tracer.
>
> Because rr (the tracer) was never notified of the signal, it is not aware
> that a signal handler frame was set up and expects the state of the program
> at PTRACE_EVENT_EXIT to be a state that will be reconstructed naturally
> by allowing the program to execute from the last event. When that fails
> to happen during replay, rr will assert and die.
>
> The following patches add an explicit check for a newly pending SIGKILL
> after the ptracer has been notified and the siglock has been reacquired.
> If this happens, we stop processing the current signal and proceed
> immediately to handling the SIGKILL. This makes the state reported at
> PTRACE_EVENT_EXIT the unmodified state of the program, and also avoids the
> work to set up a signal handler frame that will never be used.
>
> [0] https://rr-project.org/
The problem is that while the traced process makes it into ptrace_stop,
the tracee is killed before the tracer manages to wait for the
tracee and discover which signal was about to be delivered.
More generally the problem is that while siglock was dropped a signal
with process wide effect is short cirucit delivered to the entire
process killing it, but the process continues to try and deliver another
signal.
In general it impossible to avoid all cases where work is performed
after the process has been killed. In particular if the process is
killed after get_signal returns the code will simply not know it has
been killed until after delivering the signal frame to userspace.
On the other hand when the code has already discovered the process
has been killed and taken user space visible action that shows
the kernel knows the process has been killed, it is just silly
to then write the signal frame to the user space stack.
Instead of being silly detect the process has been killed
in ptrace_signal and requeue the signal so the code can pretend
it was simply never dequeued for delivery.
To test the process has been killed I use fatal_signal_pending rather
than signal_group_exit to match the test in signal_pending_state which
is used in schedule which is where ptrace_stop detects the process has
been killed.
Requeuing the signal so the code can pretend it was simply never
dequeued improves the user space visible behavior that has been
present since ebf5ebe31d2c ("[PATCH] signal-fixes-2.5.59-A4").
Kyle Huey verified that this change in behavior and makes rr happy.
Reported-by: Kyle Huey <khuey@kylehuey.com>
Reported-by: Marko Mäkelä <marko.makela@mariadb.com>
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.gi
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/87tugcd5p2.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
In the event that a tracer changes which signal needs to be delivered
and that signal is currently blocked then the signal needs to be
requeued for later delivery.
With the advent of CLONE_THREAD the kernel has 2 signal queues per
task. The per process queue and the per task queue. Update the code
so that if the signal is removed from the per process queue it is
requeued on the per process queue. This is necessary to make it
appear the signal was never dequeued.
The rr debugger reasonably believes that the state of the process from
the last ptrace_stop it observed until PTRACE_EVENT_EXIT can be recreated
by simply letting a process run. If a SIGKILL interrupts a ptrace_stop
this is not true today.
So return signals to their original queue in ptrace_signal so that
signals that are not delivered appear like they were never dequeued.
Fixes: 794aa320b79d ("[PATCH] sigfix-2.5.40-D6")
History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.gi
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/87zgq4d5r4.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=beJ8
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.16-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd bugfix from Bruce Fields:
"This is just one bugfix for a buffer overflow in knfsd's xdr decoding"
* tag 'nfsd-5.16-1' of git://linux-nfs.org/~bfields/linux:
NFSD: Fix exposure in nfsd4_decode_bitmap()
'priv->workqueue' is destroyed in the error handling path of the probe but
not in the remove function.
Add the missing call to release some resources.
Cc: stable <stable@vger.kernel.org>
Fixes: 2df7062002 ("remoteproc: imx_proc: enable virtio/mailbox")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/d28ca94a4031bd7297d47c2164e18885a5a6ec19.1634366546.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Use %pe format string to print return error code which
make the error message easier to understand.
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Link: https://lore.kernel.org/r/20211102141535.28372-1-mark-pk.tsai@mediatek.com
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[Fixed capital letter in subject line]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
This is needed for some arches, as reported by Geert Uytterhoeven,
Randy Dunlap and Stephen Rothwell
Fixes: 4721031c35 ("net: move gro definitions to include/net/gro.h")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211117100130.2368319-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently while investigating a problem with rr and signals I noticed
that siglock is dropped in ptrace_signal and get_signal does not jump
to relock.
Looking farther to see if the problem is anywhere else I see that
do_signal_stop also returns if signal_group_exit is true. I believe
that test can now never be true, but it is a bit hard to trace
through and be certain.
Testing signal_group_exit is not expensive, so move the test for
signal_group_exit into the for loop inside of get_signal to ensure
the test is never skipped improperly.
This has been a potential problem since I added the test for
signal_group_exit was added.
Fixes: 35634ffa17 ("signal: Always notice exiting tasks")
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/875yssekcd.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Currently there are two very similar approaches in use by this driver:
img_pwm_config() uses pm_runtime_get_sync() and calls
pm_runtime_put_autosuspend() in the error path; img_pwm_enable() calls
pm_runtime_resume_and_get() which already puts the reference in its own
error path.
Align pm_runtime usage and use the same idiom in both locations.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Commit c045ceb5a1 ("reset: tegra-bpmp: Handle errors in BPMP
response") fixed an issue in the Tegra BPMP error handling but has
exposed an issue in the Tegra194 HDA driver and now resetting the
Tegra194 HDA controller is failing. For now revert the commit
c045ceb5a1 ("reset: tegra-bpmp: Handle errors in BPMP response")
while a fix for the Tegra HDA driver is created.
Fixes: c045ceb5a1 ("reset: tegra-bpmp: Handle errors in BPMP response")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20211112112712.21587-1-jonathanh@nvidia.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply(). This just pushes down a slightly
optimized variant of how legacy drivers are handled in the core.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply(). This just pushes down a slightly
optimized variant of how legacy drivers are handled in the core.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply(). This just pushes down a slightly
optimized variant of how legacy drivers are handled in the core.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
It is not entirely accurate to go back to the initial state after e.g.
.enable() failed, as .config() still modified the hardware, but this same
inconsistency exists for drivers that implement .apply().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
