Do `kfree_skb(new)` before `goto out` to prevent potential leak.
Fixes: 8959077797 ("rtw89: 8852a: add ieee80211_ops::hw_scan")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103141054.17372-1-pkshih@realtek.com
Change style to feature version separate. And because there are
different WiFi roles number in the firmware, it will make structure
length longer or shorter, so update the length calculator to cover
the difference.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-8-pkshih@realtek.com
Only when firmware control report version is 1, need to get the counter by
reading the register. The other version will monitor the counter at
firmware. And upstream branch only RTL8852A has this old version.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-7-pkshih@realtek.com
Comparing v5 control report to v4 version, v5 reduce some of variable's
size to reduce firmware code size. And change the grant signal report
format.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-6-pkshih@realtek.com
The rtw89 driver may support more than 1 version of Wi-Fi firmware for
certain chips. In order to support all the firmware, change to select logic
by firmware feature version code. Type control version 4 will monitor
Bluetooth PTA hardware counters at firmware and C2H to driver, but
version 1 will not do this.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-5-pkshih@realtek.com
To support v4 version firmware cycle report, apply the related
structure and functions. v4 cycle report add a group of status
to show how the free-run/TDMA training goes to. It is a firmware
mechanism that can auto adjust coexistence mode between TDMA and
free run mechanism at 3 antenna solution.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-4-pkshih@realtek.com
Because there are new report format in the upcoming patches, to make the
logic more readable, rename the related structure by their version number.
And to support the several version at the same time, add union definition
to include all the versions.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-3-pkshih@realtek.com
There are at least 2 version of cycle report format. If the code keep
translating the report to local variable, the numbers of variable in
check btc report function will out of maximum variable numbers. And
most of these variable are using only one time, it is not necessary
to store at memory.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103140238.15601-2-pkshih@realtek.com
The DeviceTree Specification v0.3 specifies that the cache node
'compatible' and 'cache-level' properties are 'required'. Cf.
s3.8 Multi-level and Shared Cache Nodes
The 'cache-unified' property should be present if one of the
properties for unified cache is present ('cache-size', ...).
Update the Device Trees accordingly.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20221107155825.1644604-24-pierre.gondois@arm.com
Add basic support for phyCORE-AM64x SoM & phyBOARD-Electra-AM642 CB.
The phyCORE-AM64x [1] is a SoM (System on Module) featuring TI's AM64x SoC.
It can be used in combination with different carrier boards.
This module can come with different sizes and models for
DDR, eMMC, SPI NOR Flash and various SoCs from the AM64x family.
A development Kit, called phyBOARD-Electra [2] is used as a carrier board
reference design around the AM64x SoM.
Supported features:
* Debug UART
* Heartbeat LED
* GPIO buttons & LEDs
* SPI NOR flash
* eMMC
* CAN
* Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* I2C LED Dimmer
* USB
For more details, see:
[1] Product page SoM: https://www.phytec.com/product/phycore-am64x
[2] Product page CB: https://www.phytec.com/product/phyboard-am64x
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230104162927.1215033-2-w.egorov@phytec.de
Add devicetree bindings for AM64x based phyCORE-AM64 SoM
and phyBOARD-Electra RDK.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230104162927.1215033-1-w.egorov@phytec.de
This commit changes virtio/vsock to use sk_buff instead of
virtio_vsock_pkt. Beyond better conforming to other net code, using
sk_buff allows vsock to use sk_buff-dependent features in the future
(such as sockmap) and improves throughput.
This patch introduces the following performance changes:
Tool: Uperf
Env: Phys Host + L1 Guest
Payload: 64k
Threads: 16
Test Runs: 10
Type: SOCK_STREAM
Before: commit b7bfaa761d ("Linux 6.2-rc3")
Before
------
g2h: 16.77Gb/s
h2g: 10.56Gb/s
After
-----
g2h: 21.04Gb/s
h2g: 10.76Gb/s
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported a nasty crash [1] in net_tx_action() which
made little sense until we got a repro.
This repro installs a taprio qdisc, but providing an
invalid TCA_RATE attribute.
qdisc_create() has to destroy the just initialized
taprio qdisc, and taprio_destroy() is called.
However, the hrtimer used by taprio had already fired,
therefore advance_sched() called __netif_schedule().
Then net_tx_action was trying to use a destroyed qdisc.
We can not undo the __netif_schedule(), so we must wait
until one cpu serviced the qdisc before we can proceed.
Many thanks to Alexander Potapenko for his help.
[1]
BUG: KMSAN: uninit-value in queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline]
BUG: KMSAN: uninit-value in do_raw_spin_trylock include/linux/spinlock.h:191 [inline]
BUG: KMSAN: uninit-value in __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline]
BUG: KMSAN: uninit-value in _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138
queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline]
do_raw_spin_trylock include/linux/spinlock.h:191 [inline]
__raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline]
_raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138
spin_trylock include/linux/spinlock.h:359 [inline]
qdisc_run_begin include/net/sch_generic.h:187 [inline]
qdisc_run+0xee/0x540 include/net/pkt_sched.h:125
net_tx_action+0x77c/0x9a0 net/core/dev.c:5086
__do_softirq+0x1cc/0x7fb kernel/softirq.c:571
run_ksoftirqd+0x2c/0x50 kernel/softirq.c:934
smpboot_thread_fn+0x554/0x9f0 kernel/smpboot.c:164
kthread+0x31b/0x430 kernel/kthread.c:376
ret_from_fork+0x1f/0x30
Uninit was created at:
slab_post_alloc_hook mm/slab.h:732 [inline]
slab_alloc_node mm/slub.c:3258 [inline]
__kmalloc_node_track_caller+0x814/0x1250 mm/slub.c:4970
kmalloc_reserve net/core/skbuff.c:358 [inline]
__alloc_skb+0x346/0xcf0 net/core/skbuff.c:430
alloc_skb include/linux/skbuff.h:1257 [inline]
nlmsg_new include/net/netlink.h:953 [inline]
netlink_ack+0x5f3/0x12b0 net/netlink/af_netlink.c:2436
netlink_rcv_skb+0x55d/0x6c0 net/netlink/af_netlink.c:2507
rtnetlink_rcv+0x30/0x40 net/core/rtnetlink.c:6108
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0xabc/0xe90 net/socket.c:2482
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2536
__sys_sendmsg net/socket.c:2565 [inline]
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x367/0x540 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 6.0.0-rc2-syzkaller-47461-gac3859c02d7f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
Fixes: 5a781ccbd1 ("tc: Add support for configuring the taprio scheduler")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The J784S4 SoC belongs to the K3 Multicore SoC architecture
platform, providing advanced system integration in automotive,
ADAS and industrial applications requiring AI at the network edge.
This SoC extends the K3 Jacinto 7 family of SoCs with focus on
raising performance and integration while providing interfaces,
memory architecture and compute performance for multi-sensor, high
concurrency applications.
Some highlights of this SoC are:
* Up to 8 Cortex-A72s, four clusters of lockstep capable dual Cortex-R5F
MCUs, 4 C7x floating point vector DSPs with Matrix Multiply Accelerator
(MMA) for deep learning and CNN.
* 3D GPU: Automotive grade IMG BXS-4-64
* Vision Processing Accelerator (VPAC) with image signal processor and
Depth and Motion Processing Accelerator (DMPAC)
* Three CSI2.0 4L RX plus two CSI2.0 4L TX, two DSI Tx, one eDP/DP and one
DPI interface.
* Integrated gigabit ethernet switch, up to 8 ports (TDA4VH), two ports
support 10Gb USXGMII; Two 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role
device subsystems, Up to 20 MCANs, among other peripherals.
See J784S4 Technical Reference Manual (SPRUJ52 - JUNE 2022)
for further details: http://www.ti.com/lit/zip/spruj52
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20230112142725.77785-4-a-nandan@ti.com
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2023-01-13 (ixgbe)
This series contains updates to ixgbe driver only.
Jesse resolves warning for RCU pointer by no longer restoring old
pointer.
Sebastian adds waiting for updating of link info on devices utilizing
crosstalk fix to avoid false link state.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The MDIO subsystem is getting rid of MII_ADDR_C45 and thus also
encoding associated encoding of the C45 device address and register
address into one value. regmap-mdio also uses this encoding for the
C45 bus.
Move to the new C45 helpers for MDIO access and provide regmap-mdio
helper macros.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230116111509.4086236-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
Pable Neira Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Increase timeout to 120 seconds for netfilter selftests to fix
nftables transaction tests, from Florian Westphal.
2) Fix overflow in bitmap_ip_create() due to integer arithmetics
in a 64-bit bitmask, from Gavrilov Ilia.
3) Fix incorrect arithmetics in nft_payload with double-tagged
vlan matching.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct queue statistics reading. All queue statistics are stored as unsigned
long values. The retrieval for ethtool fetches these values as u64. However, on
some systems the size of the counters are 32 bit. That yields wrong queue
statistic counters e.g., on arm32 systems such as the stm32mp157. Fix it by
using the correct data type.
Tested on Olimex STMP157-OLinuXino-LIME2 by simple running linuxptp for a short
period of time:
Non-patched kernel:
|root@st1:~# ethtool -S eth0 | grep q0
| q0_tx_pkt_n: 3775276254951 # ???
| q0_tx_irq_n: 879
| q0_rx_pkt_n: 1194000908909 # ???
| q0_rx_irq_n: 278
Patched kernel:
|root@st1:~# ethtool -S eth0 | grep q0
| q0_tx_pkt_n: 2434
| q0_tx_irq_n: 1274
| q0_rx_pkt_n: 1604
| q0_rx_irq_n: 846
Fixes: 68e9c5dee1 ("net: stmmac: add ethtool per-queue statistic framework")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Cc: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>
Cc: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current CLRSIPO count is still marginal and does not work with high
DSI clock rates in burst mode. Increase it further to allow the DSI link
to work at up to 1Gbps lane speed. This returns the counts to defaults
as provided by datasheet.
Fixes: ea6490b022 ("drm/bridge: tc358767: increase CLRSIPO count")
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221016003556.406441-1-marex@denx.de
When reading pinconf-pins from debugfs it fails to get the configured pull
type on RK3568, "unsupported pinctrl type" error messages is also reported.
Fix this by adding support for RK3568 in rockchip_get_pull, including a
reverse of the pull-up value swap applied in rockchip_set_pull so that
pull-up is correctly reported in pinconf-pins.
Also update the workaround comment to reflect affected pins, GPIO0_D3-D6.
Fixes: c0dadc0e47 ("pinctrl: rockchip: add support for rk3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Jianqun Xu <jay.xu@rock-chips.com>
Link: https://lore.kernel.org/r/20230110172955.1258840-1-jonas@kwiboo.se
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-512-uwe@kleine-koenig.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The tsens driver reprogram the next trip points in the irq
handler. This function then call thermal_zone_device_update().
However, thermal_zone_device_update() calls thermal_zone_set_trips()
and from there it calls the backend 'set_trips' ops. This one in turn
reprogram the next trip points (low/high).
Consequently, the code setting the next trip points interrupt in the
interrupt handle is not needed and could be removed.
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Amit Kucheria <amitk@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230116101955.3961427-1-daniel.lezcano@linaro.org
Since resplen and respoffs are signed integers sufficiently
large values of unsigned int len and offset members of RNDIS
response will result in negative values of prior variables.
This may be utilized to bypass implemented security checks
to either extract memory contents by manipulating offset or
overflow the data buffer via memcpy by manipulating both
offset and len.
Additionally assure that sum of resplen and respoffs does not
overflow so buffer boundaries are kept.
Fixes: 80f8c5b434 ("rndis_wlan: copy only useful data from rndis_command respond")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230111175031.7049-1-szymon.heidrich@gmail.com
When dealing with a device for 2GHz band only the wiphy->bands for
5GHz will be NULL. This would result in a NULL-deref in the
brcmf_cfg80211_dump_survey() function. Rework the code with a
for-loop to make it easier to add another band.
Fixes: 6c04deae14 ("brcmfmac: Add dump_survey cfg80211 ops for HostApd AutoChannelSelection")
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103124117.271988-3-arend.vanspriel@broadcom.com
An issue was reported in which periodically error messages are
printed in the kernel log:
[ 26.303445] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 26.303554] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.bin failed with error -2
[ 26.516752] brcmfmac_wcc: brcmf_wcc_attach: executing
[ 26.528264] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
[ 27.076829] Bluetooth: hci0: BCM: features 0x2f
[ 27.078592] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+
[ 27.078601] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0342
[ 30.142104] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SS
[ 30.590017] Bluetooth: MGMT ver 1.22
[ 104.897615] brcmfmac: cfg80211_set_channel: set chanspec 0x100e fail, reason -52
[ 104.897992] brcmfmac: cfg80211_set_channel: set chanspec 0xd022 fail, reason -52
[ 105.007672] brcmfmac: cfg80211_set_channel: set chanspec 0xd026 fail, reason -52
[ 105.117654] brcmfmac: cfg80211_set_channel: set chanspec 0xd02a fail, reason -52
[ 105.227636] brcmfmac: cfg80211_set_channel: set chanspec 0xd02e fail, reason -52
[ 106.987552] brcmfmac: cfg80211_set_channel: set chanspec 0xd090 fail, reason -52
[ 106.987911] brcmfmac: cfg80211_set_channel: set chanspec 0xd095 fail, reason -52
[ 106.988233] brcmfmac: cfg80211_set_channel: set chanspec 0xd099 fail, reason -52
[ 106.988565] brcmfmac: cfg80211_set_channel: set chanspec 0xd09d fail, reason -52
[ 106.988909] brcmfmac: cfg80211_set_channel: set chanspec 0xd0a1 fail, reason -52
This happens in brcmf_cfg80211_dump_survey() because we try a disabled
channel. When channel is marked as disabled we do not need to fill any
other info so bail out.
Fixes: 6c04deae14 ("brcmfmac: Add dump_survey cfg80211 ops for HostApd AutoChannelSelection")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230103124117.271988-2-arend.vanspriel@broadcom.com
After switching to TCP_ESTABLISHED or TCP_LISTEN sk_state, alive SOCK_STREAM
and SOCK_SEQPACKET sockets can't change it anymore (since commit 3ff8bff704
"unix: Fix race in SOCK_SEQPACKET's unix_dgram_sendmsg()").
Thus, we do not need to take lock here.
Signed-off-by: Kirill Tkhai <tkhai@ya.ru>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Propagate errors from ext2_prepare_chunk to the callers and handle them
there. While touching the prototype also turn update_times into a bool
from the current int used as bool.
[JK: fixed up error recovery path in ext2_rename()]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230116085205.2342975-1-hch@lst.de>
The shutdown GPIO is active low (SD_N), but this depends on actual board
layout. Linux drivers should only care about logical state, where high
(1) means shutdown and low (0) means do not shutdown.
Invert the GPIO to match logical value while preserving backwards DTB
compatibility. It is not possible to detect whether ACTIVE_HIGH flag in
DTB is because it is an old DTB (using incorrect flag) or it is a new
DTB with a correct hardware pin polarity description. Therefore the
solution prioritizes backwards compatibility while relying on relevant
DTS being upstreamed.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230102114152.297305-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This helps figuring out why the device probe is deferred, e.g. missing
FSL_EDMA driver.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230111161144.3275546-1-alexander.stein@ew.tq-group.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initialize is_dsp_mode flag in the beginning of function
fsl_sai_set_dai_fmt_tr().
When the DAIFMT is DAIFMT_DSP_B the first time, is_dsp_mode is
true, then the second time DAIFMT is DAIFMT_I2S, is_dsp_mode
still true, which is a wrong state. So need to initialize
is_dsp_mode flag every time.
Fixes: a3f7dcc9cc ("ASoC: fsl-sai: Add SND_SOC_DAIFMT_DSP_A/B support.")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/1673852874-32200-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add common code to support of_node of codec parsing, so codec phandle
can be assigned by sound-dai in dts.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230116034131.23943-12-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mixer control for irq and memif timing selection.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230116034131.23943-10-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add audio clock wrapper and audio tuner control.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230116034131.23943-8-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8188 pcmif dai driver support
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230116034131.23943-7-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mt8188 etdm dai driver support.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230116034131.23943-6-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
