Currently, all kfd BOs use same destruction routine. But pinned
BOs are not unpinned properly. Separate them from general routine.
v2 (Felix):
Add safeguard to prevent user space from freeing signal BO.
Kunmap signal BO in the event of setting event page error.
Just kunmap signal BO to avoid duplicating the code.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The userptr can be unmapped by application and still registered to
driver, restore userptr work return user pages will get -EFAULT bad
address error. Pretend this error as succeed. GPU access this userptr
will have VM fault later, it is better than application soft hangs with
stalled user mode queues.
v2: squash in warning fix (Alex)
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a GPU hits the bad_page_threshold, it will not be initialized by
the amdgpu driver. This means that the table cannot be cleared, nor can
information gathering be performed (getting serial number, BDF, etc).
If the bad_page_threshold kernel parameter is set to -2,
continue to initialize the GPU, while printing a warning to dmesg that
this action has been done
v2: squash in Luben's fix to restore RAS info reporting
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dmesg doesn't warn when the number of bad pages approaches the
threshold for page retirement. WARN when the number of bad pages
is at 90% or greater for easier checks and planning, instead of waiting
until the GPU is full of bad pages.
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Mukul Joshi <Mukul.Joshi@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Our lane power down defines already include the necessary shift,
don't shift them a second time.
Fortunately we masked off the correct bits, so we accidentally
left all lanes powered up all the time.
Bits 8-11 where we end up writing our misdirected lane mask are
documented as MBZ, but looks like you can actually write there
so they're not read only bits. No idea what side effect the
bogus register write might have.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4151
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204937.30774-17-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
Looks like we never updated intel_bios_is_port_dp_dual_mode() when
the VBT port mapping became erratic on modern platforms. This
is causing us to look up the wrong child device and thus throwing
the heuristic off (ie. we might end looking at a child device for
a genuine DP++ port when we were supposed to look at one for a
native HDMI port).
Fix it up by not using the outdated port_mapping[] in
intel_bios_is_port_dp_dual_mode() and rely on
intel_bios_encoder_data_lookup() instead.
Cc: stable@vger.kernel.org
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4138
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211025142147.23897-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
It's faster and easier to read if we tolerate cur_hctx being NULL in
the "when to flush" condition. Rename last_hctx to cur_hctx while at it,
as it better describes the role of that variable.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With GuC handling scheduling, i915 is not aware of the time that a
context is scheduled in and out of the engine. Since i915 pmu relies on
this info to provide engine busyness to the user, GuC shares this info
with i915 for all engines using shared memory. For each engine, this
info contains:
- total busyness: total time that the context was running (total)
- id: id of the running context (id)
- start timestamp: timestamp when the context started running (start)
At the time (now) of sampling the engine busyness, if the id is valid
(!= ~0), and start is non-zero, then the context is considered to be
active and the engine busyness is calculated using the below equation
engine busyness = total + (now - start)
All times are obtained from the gt clock base. For inactive contexts,
engine busyness is just equal to the total.
The start and total values provided by GuC are 32 bits and wrap around
in a few minutes. Since perf pmu provides busyness as 64 bit
monotonically increasing values, there is a need for this implementation
to account for overflows and extend the time to 64 bits before returning
busyness to the user. In order to do that, a worker runs periodically at
frequency = 1/8th the time it takes for the timestamp to wrap. As an
example, that would be once in 27 seconds for a gt clock frequency of
19.2 MHz.
Note:
There might be an over-accounting of busyness due to the fact that GuC
may be updating the total and start values while kmd is reading them.
(i.e kmd may read the updated total and the stale start). In such a
case, user may see higher busyness value followed by smaller ones which
would eventually catch up to the higher value.
v2: (Tvrtko)
- Include details in commit message
- Move intel engine busyness function into execlist code
- Use union inside engine->stats
- Use natural type for ping delay jiffies
- Drop active_work condition checks
- Use for_each_engine if iterating all engines
- Drop seq locking, use spinlock at GuC level to update engine stats
- Document worker specific details
v3: (Tvrtko/Umesh)
- Demarcate GuC and execlist stat objects with comments
- Document known over-accounting issue in commit
- Provide a consistent view of GuC state
- Add hooks to gt park/unpark for GuC busyness
- Stop/start worker in gt park/unpark path
- Drop inline
- Move spinlock and worker inits to GuC initialization
- Drop helpers that are called only once
v4: (Tvrtko/Matt/Umesh)
- Drop addressed opens from commit message
- Get runtime pm in ping, remove from the park path
- Use cancel_delayed_work_sync in disable_submission path
- Update stats during reset prepare
- Skip ping if reset in progress
- Explicitly name execlists and GuC stats objects
- Since disable_submission is called from many places, move resetting
stats to intel_guc_submission_reset_prepare
v5: (Tvrtko)
- Add a trylock helper that does not sleep and synchronize PMU event
callbacks and worker with gt reset
v6: (CI BAT failures)
- DUTs using execlist submission failed to boot since __gt_unpark is
called during i915 load. This ends up calling the GuC busyness unpark
hook and results in kick-starting an uninitialized worker. Let
park/unpark hooks check if GuC submission has been initialized.
- drop cant_sleep() from trylock helper since rcu_read_lock takes care
of that.
v7: (CI) Fix igt@i915_selftest@live@gt_engines
- For GuC mode of submission the engine busyness is derived from gt time
domain. Use gt time elapsed as reference in the selftest.
- Increase busyness calculation to 10ms duration to ensure batch runs
longer and falls within the busyness tolerances in selftest.
v8:
- Use ktime_get in selftest as before
- intel_reset_trylock_no_wait results in a lockdep splat that is not
trivial to fix since the PMU callback runs in irq context and the
reset paths are tightly knit into the driver. The test that uncovers
this is igt@perf_pmu@faulting-read. Drop intel_reset_trylock_no_wait,
instead use the reset_count to synchronize with gt reset during pmu
callback. For the ping, continue to use intel_reset_trylock since ping
is not run in irq context.
- GuC PM timestamp does not tick when GuC is idle. This can potentially
result in wrong busyness values when a context is active on the
engine, but GuC is idle. Use the RING TIMESTAMP as GPU timestamp to
process the GuC busyness stats. This works since both GuC timestamp and
RING timestamp are synced with the same clock.
- The busyness stats may get updated after the batch starts running.
This delay causes the busyness reported for 100us duration to fall
below 95% in the selftest. The only option at this time is to wait for
GuC busyness to change from idle to active before we sample busyness
over a 100us period.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027004821.66097-2-umesh.nerlige.ramappa@intel.com
In preparation for GuC pmu stats, add a name to the execlists stats
structure so that it can be differentiated from the GuC stats.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211027004821.66097-1-umesh.nerlige.ramappa@intel.com
Return error code if devm_kmemdup() fails in ice_get_recp_frm_fw()
Fixes: fd2a6b71e3 ("ice: create advanced switch recipe")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Clang warns:
drivers/net/ethernet/intel/ice/ice_lib.c:1906:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
default:
^
drivers/net/ethernet/intel/ice/ice_lib.c:1906:2: note: insert 'break;' to avoid fall-through
default:
^
break;
1 error generated.
Clang is a little more pedantic than GCC, which does not warn when
falling through to a case that is just break or return. Clang's version
is more in line with the kernel's own stance in deprecated.rst, which
states that all switch/case blocks must end in either break,
fallthrough, continue, goto, or return. Add the missing break to silence
the warning.
Link: https://github.com/ClangBuiltLinux/linux/issues/1482
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Some devices have support for loading the PHY FW and in some cases this
can fail. When this fails, the FW will set the corresponding bit in the
link info structure. Also, the FW will send a link event if the correct
link event mask bit is set. Add support for printing an error message
when the PHY FW load fails during any link configuration flow and the
link event flow.
Since ice_check_module_power() is already doing something very similar
add a new function ice_check_link_cfg_err() so any failures reported in
the link info's link_cfg_err member can be printed in this one function.
Also, add the new ICE_FLAG_PHY_FW_LOAD_FAILED bit to the PF's flags so
we don't constantly print this error message during link polling if the
value never changed.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This change adds support for changing MTU on port representor in
switchdev mode, by setting the min/max MTU values on port representor
netdev. Before it was possible to change the MTU only in a limited,
default range (68-1500).
Signed-off-by: Marcin Szycik <marcin.szycik@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Part of virtchannel messages are treated in different way in switchdev
mode to block configuring VFs from iavf driver side. This blocking was
done by doing nothing and returning success, event without sending
response.
Not sending response for opcodes that aren't supported in switchdev mode
leads to block iavf driver message handling. This happens for example
when vlan is configured at VF config time (VLAN module is already
loaded).
To get rid of it ice driver should answer for each VF message. In
switchdev mode:
- for adding/deleting VLAN driver should answer success without doing
anything to allow creating vlan device on VFs
- for enabling/disabling VLAN stripping and promiscuous mode driver
should answer not supported, this feature in switchdev can be only
set from host side
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mostly reuse code from Geneve and VXLAN in TC parsing code. Add new GRE
header to match on correct fields. Create new dummy packets with GRE
fields.
Instead of checking if any encap values are presented in TC flower,
check if device is tunnel type or redirect is to tunnel device. This
will allow adding all combination of rules. For example filters only
with inner fields.
Return error in case device isn't tunnel but encap values are presented.
gre example:
- create tunnel device
ip l add $NVGRE_DEV type gretap remote $NVGRE_REM_IP local $VF1_IP \
dev $PF
- add tc filter (in switchdev mode)
tc filter add dev $NVGRE_DEV protocol ip parent ffff: flower dst_ip \
$NVGRE1_IP action mirred egress redirect dev $VF1_PR
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add definition of UDP tunnel dummy packets. Fill destination port value
in filter based on UDP tunnel port. Append tunnel flags to switch filter
definition in case of matching the tunnel.
Both VXLAN and Geneve are UDP tunnels, so only one new header is needed.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add definition for VXLAN and Geneve dummy packet. Define VXLAN and
Geneve type of fields to match on correct UDP tunnel header.
Parse tunnel specific fields from TC tool like outer MACs, outer IPs,
outer destination port and VNI. Save values and masks in outer header
struct and move header pointer to inner to simplify parsing inner
values.
There are two cases for redirect action:
- from uplink to VF - TC filter is added on tunnel device
- from VF to uplink - TC filter is added on PR, for this case check if
redirect device is tunnel device
VXLAN example:
- create tunnel device
ip l add $VXLAN_DEV type vxlan id $VXLAN_VNI dstport $VXLAN_PORT \
dev $PF
- add TC filter (in switchdev mode)
tc filter add dev $VXLAN_DEV protocol ip parent ffff: flower \
enc_dst_ip $VF1_IP enc_key_id $VXLAN_VNI action mirred egress \
redirect dev $VF1_PR
Geneve example:
- create tunnel device
ip l add $GENEVE_DEV type geneve id $GENEVE_VNI dstport $GENEVE_PORT \
remote $GENEVE_IP
- add TC filter (in switchdev mode)
tc filter add dev $GENEVE_DEV protocol ip parent ffff: flower \
enc_key_id $GENEVE_VNI dst_ip $GENEVE1_IP action mirred egress \
redirect dev $VF1_PR
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
scsi_dma_map() was reporting a failure during boot on an AMD machine
with the IOMMU enabled.
scsi_dma_map failed: request for 36 bytes!
The issue was tracked down to a mistake in logic: should not return
an error if iommu_deferred_attach() returns zero.
Reported-by: Marshall Midden <marshallmidden@gmail.com>
Fixes: dabb16f672 ("iommu/dma: return error code from iommu_dma_map_sg()")
Link: https://lore.kernel.org/all/CAD2CkAWjS8=kKwEEN4cgVNjyFORUibzEiCUA-X+SMtbo0JoMmA@mail.gmail.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20211027174757.119755-1-logang@deltatee.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Implement indirect notification mechanism to support offloading TC rules
on tunnel devices.
Keep indirect block list in netdev priv. Notification will call setting
tc cls flower function. For now we can offload only ingress type. Return
not supported for other flow block binder.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use 2-factor argument form kvcalloc() instead of kvzalloc().
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Add memcpy in edma. The edma has the capability to transfer data by
software trigger so that it could be used for memory copy. Enable
MEMCPY for edma driver and it could be test directly by dmatest.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Link: https://lore.kernel.org/r/20211026090025.2777292-1-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The wq resources needs to be released before the kernel type is reset by
__drv_disable_wq(). With dma channels unregistered and wq quiesced, all the
wq resources for dmaengine can be freed. There is no need to wait until wq
is disabled. With the wq->type being reset to "unknown", the driver is
skipping the freeing of the resources.
Fixes: 0cda4f6986 ("dmaengine: idxd: create dmaengine driver for wq 'device'")
Reported-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163517405099.3484556.12521975053711345244.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to core-api/dma-api-howto.rst, the address from
dma_alloc_coherent is gauranteed to align to the smallest PAGE_SIZE order.
That supercedes the 64B/32B alignment requirement of the completion record.
Remove alignment adjustment code.
Tested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/163517396063.3484297.7494385225280705372.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DMA clients can provide one of two types of callbacks. For this reason
dmaengine drivers should not directly invoke `callback`, but always use
`dmaengine_desc_callback_invoke()`. This makes sure that both types of
callbacks are handled correctly.
The zynqmp_dma driver currently doesn't do this and only handles the
`callback` type callback. If the client used the `callback_result` type
callback it will not be called.
Fix this by switching to `dmaengine_desc_callback_valid()` and
`dmaengine_desc_callback_invoke()`.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211025075428.2094-3-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DMA clients can provide one of two types of callbacks. For this reason
dmaengine drivers should not directly invoke `callback`, but always use
`dmaengine_desc_callback_invoke()`. This makes sure that both types of
callbacks are handled correctly.
The xilinx_dma driver currently doesn't do this for cyclic descriptors and
only handles the `callback` type callback. If the client used the
`callback_result` type callback it will not be called.
Fix this by switching to `dmaengine_desc_callback_valid()` and
`dmaengine_desc_callback_invoke()`.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211025075428.2094-2-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
DMA clients can provide one of two types of callbacks. For this reason
dmaengine drivers should not directly invoke `callback`, but always use
dmaengine_desc_callback_invoke(). This makes sure that both types of
callbacks are handled correctly.
The altera-msgdma driver currently doesn't do this and only handles the
`callback` type callback. If the client used the `callback_result` type
callback it will not be called.
Fix this by switching to `dmaengine_desc_callback_valid()` and
`dmaengine_desc_callback_invoke()`.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20211025075428.2094-1-lars@metafoo.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
PSR2 is supported in transcoder A and B on Alderlake-P.
v2:
- explicity checking for transcoder A and B to avoid invalid transcoder
BSpec: 49185
Reviewed-by: Jouni Högander <jouni.hogander@intel.com> # v1
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jouni Hogander <jouni.hogander@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com> # v2
Link: https://patchwork.freedesktop.org/patch/msgid/20211027180545.55660-1-jose.souza@intel.com
(mac80211), and BPF.
Current release - regressions:
- skb_expand_head: adjust skb->truesize to fix socket memory
accounting
- mptcp: fix corrupt receiver key in MPC + data + checksum
Previous releases - regressions:
- multicast: calculate csum of looped-back and forwarded packets
- cgroup: fix memory leak caused by missing cgroup_bpf_offline
- cfg80211: fix management registrations locking, prevent list
corruption
- cfg80211: correct false positive in bridge/4addr mode check
- tcp_bpf: fix race in the tcp_bpf_send_verdict resulting in reusing
previous verdict
Previous releases - always broken:
- sctp: enhancements for the verification tag, prevent attackers
from killing SCTP sessions
- tipc: fix size validations for the MSG_CRYPTO type
- mac80211: mesh: fix HE operation element length check, prevent
out of bound access
- tls: fix sign of socket errors, prevent positive error codes
being reported from read()/write()
- cfg80211: scan: extend RCU protection in cfg80211_add_nontrans_list()
- implement ->sock_is_readable() for UDP and AF_UNIX, fix poll()
for sockets in a BPF sockmap
- bpf: fix potential race in tail call compatibility check resulting
in two operations which would make the map incompatible succeeding
- bpf: prevent increasing bpf_jit_limit above max
- bpf: fix error usage of map_fd and fdget() in generic batch update
- phy: ethtool: lock the phy for consistency of results
- prevent infinite while loop in skb_tx_hash() when Tx races with
driver reconfiguring the queue <> traffic class mapping
- usbnet: fixes for bad HW conjured by syzbot
- xen: stop tx queues during live migration, prevent UAF
- net-sysfs: initialize uid and gid before calling net_ns_get_ownership
- mlxsw: prevent Rx stalls under memory pressure
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmF6zR8ACgkQMUZtbf5S
Irtu4w//e7BJVjn1zKnGHo5SdpHwIxePP5sgD7rGT9udTlYUeteRAEQPALlA8oHo
6nx59eZBlvOt4+1yyK8qVzT94aLca8dwJ4j7dlONrvLFyWinSUlSZ5ayH8Co2f8t
ZGYVg+EinR6b+iaeUp5PG0VGbW+FmyIO6iS2xytireJxW6sytZ2BLlrus4+j7BCM
oCaLD+P6A1bCH1PxDMO2GRFNXphxPX3azec33HpNevHD0iwdgrjAlnz0+PZ5uiEA
AQ92PVw59+I1el/h0SxDsxfOrCdUMWbM4ZoC2wf0jDC8o6tAg4KxhlI0lAiMvhla
iqo0BTxhMWAeqC4CMmZJVGAR7zY7xpZiLowp92qSCzZpG0XKVxPaomLFGHFiU3Im
JDNGGmWAsE5maWsMbUtGr9Gd4Gxoor5r2YfFwCBsMsg7VtO98lCIdORi44VGVD3A
z2OtHEk0ismOmu8ktDumpFPTF0l1G5HR+YxsVP7obEh3T+hv4nEwPtHQ7OsByuxg
BBUrmOGr3hB5kcYtbmT/CqLqGXHNCCEAS0f+7mCPsGJfMvsOZeVurdk5GS7SjPIE
870ogJycV+KRP7ZoefXQxiRe9oCmQs9tFQqCxyPwZ8O5vevTx78D5vj1dkuF4Q5w
cbn2qbgJAtNe0UN1Gxw3emarofXarAVQoO7n+29CDFG5fe/NlnY=
=61p6
-----END PGP SIGNATURE-----
Merge tag 'net-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from WiFi (mac80211), and BPF.
Current release - regressions:
- skb_expand_head: adjust skb->truesize to fix socket memory
accounting
- mptcp: fix corrupt receiver key in MPC + data + checksum
Previous releases - regressions:
- multicast: calculate csum of looped-back and forwarded packets
- cgroup: fix memory leak caused by missing cgroup_bpf_offline
- cfg80211: fix management registrations locking, prevent list
corruption
- cfg80211: correct false positive in bridge/4addr mode check
- tcp_bpf: fix race in the tcp_bpf_send_verdict resulting in reusing
previous verdict
Previous releases - always broken:
- sctp: enhancements for the verification tag, prevent attackers from
killing SCTP sessions
- tipc: fix size validations for the MSG_CRYPTO type
- mac80211: mesh: fix HE operation element length check, prevent out
of bound access
- tls: fix sign of socket errors, prevent positive error codes being
reported from read()/write()
- cfg80211: scan: extend RCU protection in
cfg80211_add_nontrans_list()
- implement ->sock_is_readable() for UDP and AF_UNIX, fix poll() for
sockets in a BPF sockmap
- bpf: fix potential race in tail call compatibility check resulting
in two operations which would make the map incompatible succeeding
- bpf: prevent increasing bpf_jit_limit above max
- bpf: fix error usage of map_fd and fdget() in generic batch update
- phy: ethtool: lock the phy for consistency of results
- prevent infinite while loop in skb_tx_hash() when Tx races with
driver reconfiguring the queue <> traffic class mapping
- usbnet: fixes for bad HW conjured by syzbot
- xen: stop tx queues during live migration, prevent UAF
- net-sysfs: initialize uid and gid before calling
net_ns_get_ownership
- mlxsw: prevent Rx stalls under memory pressure"
* tag 'net-5.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits)
Revert "net: hns3: fix pause config problem after autoneg disabled"
mptcp: fix corrupt receiver key in MPC + data + checksum
riscv, bpf: Fix potential NULL dereference
octeontx2-af: Fix possible null pointer dereference.
octeontx2-af: Display all enabled PF VF rsrc_alloc entries.
octeontx2-af: Check whether ipolicers exists
net: ethernet: microchip: lan743x: Fix skb allocation failure
net/tls: Fix flipped sign in async_wait.err assignment
net/tls: Fix flipped sign in tls_err_abort() calls
net/smc: Correct spelling mistake to TCPF_SYN_RECV
net/smc: Fix smc_link->llc_testlink_time overflow
nfp: bpf: relax prog rejection for mtu check through max_pkt_offset
vmxnet3: do not stop tx queues after netif_device_detach()
r8169: Add device 10ec:8162 to driver r8169
ptp: Document the PTP_CLK_MAGIC ioctl number
usbnet: fix error return code in usbnet_probe()
net: hns3: adjust string spaces of some parameters of tx bd info in debugfs
net: hns3: expand buffer len for some debugfs command
net: hns3: add more string spaces for dumping packets number of queue info in debugfs
net: hns3: fix data endian problem of some functions of debugfs
...
In some configurations, the BAM DMA controller is set up by a remote
processor and the local processor can simply start making use of it
without setting up the BAM. This is already supported using the
"qcom,controlled-remotely" property.
However, for some reason another possible configuration is that the
remote processor is responsible for powering up the BAM, but we are
still responsible for initializing it (e.g. resetting it etc).
This configuration is quite challenging to handle properly because
the power control is handled through separate channels
(e.g. device-specific SMSM interrupts / smem-states). Great care
must be taken to ensure the BAM registers are not accessed while
the BAM is powered off since this results in a bus stall.
Attempt to support this configuration with minimal device-specific
code in the bam_dma driver by tracking the number of requested
channels. Consumers of DMA channels are responsible to only request
DMA channels when the BAM was powered on by the remote processor,
and to release them before the BAM is powered off.
When the first channel is requested the BAM is initialized (reset)
and it is also put into reset when the last channel was released.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20211018102421.19848-3-stephan@gerhold.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In some configurations, the BAM DMA controller is set up by a remote
processor and the local processor can simply start making use of it
without setting up the BAM. This is already supported using the
"qcom,controlled-remotely" property.
However, for some reason another possible configuration is that the
remote processor is responsible for powering up the BAM, but we are
still responsible for initializing it (e.g. resetting it etc). Add
a "qcom,powered-remotely" property to describe that configuration.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20211018102421.19848-2-stephan@gerhold.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When built without CONFIG_PWM there are no references to
ti_sn65dsi86_read_u16(), avoid the W=1 build warning by marking the
function as __maybe_unused.
__maybe_unused is used insted of a #ifdef guard as it looks slighly
cleaner and it avoids issues if in the future other permutations of the
config options would use the function.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: cea86c5bb4 ("drm/bridge: ti-sn65dsi86: Implement the pwm_chip")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211028163548.273736-1-bjorn.andersson@linaro.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
This is a more complicated conversion because vfio_ccw is sharing the
vfio_device between both the mdev_device, its vfio_device and the
css_driver.
The mdev is a singleton, and the reason for this sharing is so the extra
css_driver function callbacks to be delivered to the vfio_device
implementation.
This keeps things as they are, with the css_driver allocating the
singleton, not the mdev_driver.
Embed the vfio_device in the vfio_ccw_private and instantiate it as a
vfio_device when the mdev probes. The drvdata of both the css_device and
the mdev_device point at the private, and container_of is used to get it
back from the vfio_device.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/4-v4-cea4f5bd2c00+b52-ccw_mdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
mdev_device should only be used in functions assigned to ops callbacks,
interior functions should use the struct vfio_ccw_private instead of
repeatedly trying to get it from the mdev.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/3-v4-cea4f5bd2c00+b52-ccw_mdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Makes the code easier to understand what is memory lifecycle and what is
other stuff.
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v4-cea4f5bd2c00+b52-ccw_mdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Since the ccw_io_region was split out of the private the allocation no
longer needs the GFP_DMA. Remove it.
Reported-by: Christoph Hellwig <hch@infradead.org>
Fixes: c98e16b2fa ("s390/cio: Convert ccw_io_region to pointer")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/1-v4-cea4f5bd2c00+b52-ccw_mdev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
A couple of final driver specific fixes for v5.15, one fixing potential
ID collisions between two instances of the Altera driver and one making
Microwire full duplex mode actually work on pl022.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF6k84ACgkQJNaLcl1U
h9CnzwgAgI8It2vQvFkMHEYjyRvOlqe6x/PcOB/ZG0yt4POEKFIzwbszCSBwdq3G
JezwmYNmIZc262Rry5gKzTBF8jCF1iImBpL0ggXE9CVN3kpWS+lvOWn8qs8cUwkX
MYvdJBYg1IdWOdX8UC2E3ZklOQs+rJXlQe6pRmrlIhgCWED9EHMuedRY5iT8Kfet
ug3NqJt7x2WHgTp5lPUMQAvYkarllU1NfXkDQfwEWoinrXgPjhu0SsxrMUYRQu53
gEuaAqSphPPGx1GsLQNXd5xJhP6KkuZGKJKq8xXBO4seDVMri7BYl52QLqPAwVih
hPl1Xl8v6+nwDoFAvRM1ICzu6WyrTA==
=PM9x
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of final driver specific fixes for v5.15, one fixing
potential ID collisions between two instances of the Altera driver and
one making Microwire full duplex mode actually work on pl022"
* tag 'spi-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spl022: fix Microwire full duplex mode
spi: altera: Change to dynamic allocation of spi id
This fixes a potential double free when handling an out of memory error
inserting a node into an rbtree regcache.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmF6lHQACgkQJNaLcl1U
h9DNugf/WXDIhnn1ToxWpe80tGZFgTcyXN1T6QfCiP5iKbOsYHFYrITDUhnbCrV+
4z5YngU8Jw2bz6nx72Yt3c4bwQRl6ZESgH6Rupr1nClQO06k8bLySLVWJPH1V3y4
ofzdSc7x6JVHaVLj09NR6N3rrOKbmMxS8Ny0RMr7Futu0cPog0/7f57zG/Mkq9Fw
vBsLvtpwt9cAOPRl7lxiU3NXKVdWYyIXxOCGW7z+e7u/HK7W5ByELrgXo1BFLXST
dUks5d5qKHmExB/7plxv8mxOQlNHVimTxXpt2sL9Z9FoQR3OCs5kfG+eaIDyx5UW
Y10gaxu61sRO6g9EqUPhfzOkiAYk5Q==
=hMOi
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"This fixes a potential double free when handling an out of memory
error inserting a node into an rbtree regcache"
* tag 'regmap-fix-v5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix possible double-free in regcache_rbtree_exit()
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmF5tW8ACgkQ+iyteGJfRsrM3gCfZ83N4iiCkl5wohEyg7bgAW0A
ZyEAn1/BIzNw7ZnCdBr3akmjaXKYyM/y
=M5Hc
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-5.15-rc7' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
"I overlooked Guenters request to sent this upstream earlier, so it's a
bit late in the release cycle.
This contains:
- Revert "watchdog: iTCO_wdt: Account for rebooting on second
timeout"
- sbsa: only use 32-bit accessors
- sbsa: drop unneeded MODULE_ALIAS
- ixp4xx_wdt: Fix address space warning
- Fix OMAP watchdog early handling"
* tag 'linux-watchdog-5.15-rc7' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: Fix OMAP watchdog early handling
watchdog: ixp4xx_wdt: Fix address space warning
watchdog: sbsa: drop unneeded MODULE_ALIAS
watchdog: sbsa: only use 32-bit accessors
Revert "watchdog: iTCO_wdt: Account for rebooting on second timeout"
If the user tries to attach an event probe (eprobe) to an event that does
not exist, it will trigger a warning. There's an error check that only
expects memory issues otherwise it is considered a bug. But changes in the
code to move around the locking made it that it can error out if the user
attempts to attach to an event that does not exist, returning an -ENODEV.
As this path can be caused by user space putting in a bad value, do not
trigger a WARN.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYXoHQhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qjT+AQCx4ThfDRwuUkIyfzJR68b6t9YnOL3p
gqoSsjIj2JvzzQD/VrsXbmZJw9iYBYKFzkDxaNkRpI7HWFdInD7jzRTo4w0=
=RWQl
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.15-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Do not WARN when attaching event probe to non-existent event
If the user tries to attach an event probe (eprobe) to an event that
does not exist, it will trigger a warning. There's an error check that
only expects memory issues otherwise it is considered a bug. But
changes in the code to move around the locking made it that it can
error out if the user attempts to attach to an event that does not
exist, returning an -ENODEV. As this path can be caused by user space
putting in a bad value, do not trigger a WARN"
* tag 'trace-v5.15-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not warn when connecting eprobe to non existing event
A user reports functional regression for Mackie Onyx 1640i that the device
generates slow sound with ALSA oxfw driver which supports media clock
recovery. Although the device is based on OXFW971 ASIC, it does not
transfer isochronous packet with own event frequency as expected. The
device seems to adjust event frequency according to events in received
isochronous packets in the beginning of packet streaming. This is
unknown quirk.
This commit fixes the regression to turn the recovery off in driver
side. As a result, nominal frequency is used in duplex packet streaming
between device and driver. For stability of sampling rate in events of
transferred isochronous packet, 4,000 isochronous packets are skipped
in the beginning of packet streaming.
Reference: https://github.com/takaswie/snd-firewire-improve/issues/38
Fixes: 029ffc4294 ("ALSA: oxfw: perform sequence replay for media clock recovery")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211028130325.45772-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
using packetdrill it's possible to observe that the receiver key contains
random values when clients transmit MP_CAPABLE with data and checksum (as
specified in RFC8684 §3.1). Fix the layout of mptcp_out_options, to avoid
using the skb extension copy when writing the MP_CAPABLE sub-option.
Fixes: d7b2690837 ("mptcp: shrink mptcp_out_options struct")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/233
Reported-by: Poorva Sonparote <psonparo@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20211027203855.264600-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The bpf_jit_binary_free() function requires a non-NULL argument. When
the RISC-V BPF JIT fails to converge in NR_JIT_ITERATIONS steps,
jit_data->header will be NULL, which triggers a NULL
dereference. Avoid this by checking the argument, prior calling the
function.
Fixes: ca6cb5447c ("riscv, bpf: Factor common RISC-V JIT code")
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20211028125115.514587-1-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of evaluating _ADR in acpi_find_child_device(), use the
observation that it has already been evaluated and the value returned
by it has been stored in the pnp.type.bus_address field of the ACPI
device object at hand.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it go through appropriate helpers.
Even though the current code uses dev->addr_len the we can switch
to eth_hw_addr_set() instead of dev_addr_set(). The netdev is
always allocated by alloc_etherdev_mq() and there are at least two
places which assume Ethernet address:
- the line below calling eth_hw_addr_random()
- virtnet_set_mac_address() -> eth_commit_mac_addr_change()
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20211027152012.3393077-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
