Function tegra_pinctrl_gpio_request_enable() and
tegra_pinctrl_gpio_disable_free() uses pin offset instead
of group offset, causing the driver to use wrong offset
to enable gpio.
Add a helper function tegra_pinctrl_get_group() to parse the
pin group and determine correct offset.
Signed-off-by: Kartik K <kkartik@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://lore.kernel.org/r/20211025110959.27751-1-pshete@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Originally all DAX access when through block_device operations and thus
needed a queue reference. But since commit cccbce6715
("filesystem-dax: convert to dax_direct_access()") all this happens at
the DAX device level which uses its own refcounting. Having the external
refcount thus wasn't needed but has otherwise been harmless for long
time.
But now that "block: drain file system I/O on del_gendisk" waits for
q_usage_count to reach 0 in del_gendisk this whole scheme can't work
anymore (and pmem is the only driver abusing q_usage_count like that).
So switch to the internal reference and remove the unbalanced
blk_freeze_queue_start that is taken care of by del_gendisk.
Fixes: 8e141f9eb8 ("block: drain file system I/O on del_gendisk")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20211019073641.2323410-2-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
'make randconfig' can produce a .config file with
"CONFIG_MEMORY_RESERVE=" (no value) since it has no default.
When a subsequent 'make all' is done, kconfig restarts the config
and prompts for a value for MEMORY_RESERVE. This breaks
scripting/automation where there is no interactive user input.
Add a default value for MEMORY_RESERVE. (Any integer value will
work here for kconfig.)
Fixes a kconfig warning:
.config:214:warning: symbol value '' invalid for MEMORY_RESERVE
* Restart config...
Memory reservation (MiB) (MEMORY_RESERVE) [] (NEW)
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2") # from beginning of git history
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The __compiletime_strlen() macro expansion will shadow p_size and p_len
local variables. No callers currently use any of the shadowed names
for their "p" variable, so there are no code generation problems.
Add "__" prefixes to variable definitions __compiletime_strlen() to
avoid new W=2 warnings:
./include/linux/fortify-string.h: In function 'strnlen':
./include/linux/fortify-string.h:17:9: warning: declaration of 'p_size' shadows a previous local [-Wshadow]
17 | size_t p_size = __builtin_object_size(p, 1); \
| ^~~~~~
./include/linux/fortify-string.h:77:17: note: in expansion of macro '__compiletime_strlen'
77 | size_t p_len = __compiletime_strlen(p);
| ^~~~~~~~~~~~~~~~~~~~
./include/linux/fortify-string.h:76:9: note: shadowed declaration is here
76 | size_t p_size = __builtin_object_size(p, 1);
| ^~~~~~
Signed-off-by: Qian Cai <quic_qiancai@quicinc.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211025210528.261643-1-quic_qiancai@quicinc.com
Andrii Nakryiko says:
====================
Reduce amount of waiting time when running test_progs in parallel mode (-j) by
splitting bpf_verif_scale selftests into multiple tests. Previously it was
structured as a test with multiple subtests, but subtests are not easily
parallelizable with test_progs' infra. Also in practice each scale subtest is
really an independent test with nothing shared across all substest.
This patch set changes how test_progs test discovery works. Now it is possible
to define multiple tests within a single source code file. One of the patches
also marks tc_redirect selftests as serial, because it's extremely harmful to
the test system when run in parallel mode.
====================
Acked-by: Yucong Sun <sunyucong@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of using subtests in bpf_verif_scale selftest, turn each scale
sub-test into its own test. Each subtest is compltely independent and
just reuses a bit of common test running logic, so the conversion is
trivial. For convenience, keep all of BPF verifier scale tests in one
file.
This conversion shaves off a significant amount of time when running
test_progs in parallel mode. E.g., just running scale tests (-t verif_scale):
BEFORE
======
Summary: 24/0 PASSED, 0 SKIPPED, 0 FAILED
real 0m22.894s
user 0m0.012s
sys 0m22.797s
AFTER
=====
Summary: 24/0 PASSED, 0 SKIPPED, 0 FAILED
real 0m12.044s
user 0m0.024s
sys 0m27.869s
Ten second saving right there. test_progs -j is not yet ready to be
turned on by default, unfortunately, and some tests fail almost every
time, but this is a good improvement nevertheless. Ignoring few
failures, here is sequential vs parallel run times when running all
tests now:
SEQUENTIAL
==========
Summary: 206/953 PASSED, 4 SKIPPED, 0 FAILED
real 1m5.625s
user 0m4.211s
sys 0m31.650s
PARALLEL
========
Summary: 204/952 PASSED, 4 SKIPPED, 2 FAILED
real 0m35.550s
user 0m4.998s
sys 0m39.890s
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-5-andrii@kernel.org
It seems to cause a lot of harm to kprobe/tracepoint selftests. Yucong
mentioned before that it does manipulate sysfs, which might be the
reason. So let's mark it as serial, though ideally it would be less
intrusive on the system at test.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-4-andrii@kernel.org
Revamp how test discovery works for test_progs and allow multiple test
entries per file. Any global void function with no arguments and
serial_test_ or test_ prefix is considered a test.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-3-andrii@kernel.org
Ensure that all test entry points are global void functions with no
input arguments. Mark few subtest entry points as static.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022223228.99920-2-andrii@kernel.org
Update save_v86_state to always complete all of it's work except
possibly some of the copies to userspace even if save_v86_state takes
a fault. This ensures that the kernel is always in a sane state, even
if userspace has done something silly.
When save_v86_state takes a fault update it to force userspace to take
a SIGSEGV and terminate the userspace application.
As Andy pointed out in review of the first version of this change
there are races between sigaction and the application terinating. Now
that the code has been modified to always perform all save_v86_state's
work (except possibly copying to userspace) those races do not matter
from a kernel perspective.
Forcing the userspace application to terminate (by resetting it's
handler to SIGDFL) is there to keep everything as close to the current
behavior as possible while removing the unique (and difficult to
maintain) use of do_exit.
If this new SIGSEGV happens during handle_signal the next time around
the exit_to_user_mode_loop, SIGSEGV will be delivered to userspace.
All of the callers of handle_vm86_trap and handle_vm86_fault run the
exit_to_user_mode_loop before they return to userspace any signal sent
to the current task during their execution will be delivered to the
current task before that tasks exits to usermode.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: H Peter Anvin <hpa@zytor.com>
v1: https://lkml.kernel.org/r/20211020174406.17889-10-ebiederm@xmission.com
Link: https://lkml.kernel.org/r/877de1xcr6.fsf_-_@disp2133
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The function save_v86_state is only called when userspace was
operating in vm86 mode before entering the kernel. Not having vm86
state in the task_struct should never happen. So transform the hand
rolled BUG_ON into an actual BUG_ON to make it clear what is
happening.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: x86@kernel.org
Cc: H Peter Anvin <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20211020174406.17889-9-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
The function setup_tsb_params has exactly one caller tsb_grow. The
function tsb_grow passes in a tsb_bytes value that is between 8192 and
1048576 inclusive, and is guaranteed to be a power of 2. The function
setup_tsb_params verifies this property with a switch statement and
then prints an error and causes the task to exit if this is not true.
In practice that print statement can never be reached because tsb_grow
never passes in a bad tsb_size. So if tsb_size ever gets a bad value
that is a kernel bug.
So replace the do_exit which is effectively an open coded version of
BUG() with an actuall call to BUG(). Making it clearer that this
is a case that can never, and should never happen.
Cc: David Miller <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Link: https://lkml.kernel.org/r/20211020174406.17889-8-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
If the register state may be partial and corrupted instead of calling
do_exit, call force_sigsegv(SIGSEGV). Which properly kills the
process with SIGSEGV and does not let any more userspace code execute,
instead of just killing one thread of the process and potentially
confusing everything.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
History-tree: git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Fixes: 756f1ae8a44e ("PPC32: Rework signal code and add a swapcontext system call.")
Fixes: 04879b04bf50 ("[PATCH] ppc64: VMX (Altivec) support & signal32 rework, from Ben Herrenschmidt")
Link: https://lkml.kernel.org/r/20211020174406.17889-7-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Today the sh code allocates memory the first time a process uses
the fpu. If that memory allocation fails, kill the affected task
with force_sig(SIGKILL) rather than do_group_exit(SIGKILL).
Calling do_group_exit from an exception handler can potentially lead
to dead locks as do_group_exit is not designed to be called from
interrupt context. Instead use force_sig(SIGKILL) to kill the
userspace process. Sending signals in general and force_sig in
particular has been tested from interrupt context so there should be
no problems.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Fixes: 0ea820cf9b ("sh: Move over to dynamically allocated FPU context.")
Link: https://lkml.kernel.org/r/20211020174406.17889-6-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
When an instruction to save or restore a register from the stack fails
in _save_fp_context or _restore_fp_context return with -EFAULT. This
change was made to r2300_fpu.S[1] but it looks like it got lost with
the introduction of EX2[2]. This is also what the other implementation
of _save_fp_context and _restore_fp_context in r4k_fpu.S does, and
what is needed for the callers to be able to handle the error.
Furthermore calling do_exit(SIGSEGV) from bad_stack is wrong because
it does not terminate the entire process it just terminates a single
thread.
As the changed code was the only caller of arch/mips/kernel/syscall.c:bad_stack
remove the problematic and now unused helper function.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Maciej Rozycki <macro@orcam.me.uk>
Cc: linux-mips@vger.kernel.org
[1] 35938a00ba ("MIPS: Fix ISA I FP sigcontext access violation handling")
[2] f92722dc45 ("MIPS: Correct MIPS I FP sigcontext layout")
Cc: stable@vger.kernel.org
Fixes: f92722dc45 ("MIPS: Correct MIPS I FP sigcontext layout")
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lkml.kernel.org/r/20211020174406.17889-5-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Currently, max_macs is taking 70Kbytes of memory per function. This
size is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the number of max_macs.
For example, to reduce the number of max_macs to 1, execute::
$ devlink dev param set pci/0000:00:0b.0 name max_macs value 1 \
cmode driverinit
$ devlink dev reload pci/0000:00:0b.0
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Event EQ is an EQ which received the notification of almost all the
events generated by the NIC.
Currently, each event EQ is taking 512KB of memory. This size is not
needed in most use cases, and is critical with large scale. Hence,
allow user to configure the size of the event EQ.
For example to reduce event EQ size to 64, execute::
$ devlink resource set pci/0000:00:0b.0 path /event_eq_size/ size 64
$ devlink dev reload pci/0000:00:0b.0
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, each I/O EQ is taking 128KB of memory. This size
is not needed in all use cases, and is critical with large scale.
Hence, allow user to configure the size of I/O EQs.
For example, to reduce I/O EQ size to 64, execute:
$ devlink resource set pci/0000:00:0b.0 path /io_eq_size/ size 64
$ devlink dev reload pci/0000:00:0b.0
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The SWITCHDEV_FDB_ADD_TO_DEVICE is used for both adding new and replacing
existing entry. Implement support for replacing existing FDB entries in
mlx5 offload code.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Following two patterns in bridge code are used in multiple places where
similar code is duplicated:
- Lookup FDB entry from hashtable by address+vid pair.
- Notify software bridge and then delete existing FDB entry.
In order to improve code quality and prepare for following patch series
that also uses described patterns, extract the codes to dedicated helper
functions.
This commit doesn't change functionality.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Firmware logs its asserts also to non-volatile memory. In order to
reduce drift between the NIC and the host, the driver sets the host
epoch-time to the firmware every hour.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add log macro which gets log level as a parameter. Use the severity
read from the health buffer and the new log macro to log the health buffer
with severity as log level. Prior to this patch, health buffer was
printed in error log level regardless of its severity. Now the user may
filter dmesg (--level) or change kernel log level to focus on different
severity levels of firmware errors.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, the flow counters bulk query buffer takes a little more than
512KB of memory, which is aligned to the next power of 2, to 1MB.
The buffer size determines the maximum number of flow counters that can
be queried at a time. Thus, having a bigger buffer can improve
performance for users that need to query many flow counters.
SFs don't use many flow counters and don't need a big buffer. Since this
size is critical with large scale, reduce the size of the bulk query
buffer for SFs.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The cited commit is causing unused-function warning[1] when
CONFIG_MLX5_EN_RXNFC is not set.
Fix this by moving the function into the ifdef, where it's only used
[1]
warning: ‘mlx5i_flow_type_mask’ defined but not used [-Wunused-function]
Fixes: 9fbe1c25ec ("net/mlx5i: Enable Rx steering for IPoIB via ethtool")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
After previous changes, caller (mlx5e_tc_offload_fdb_rules()) already
checks for the slow path flag, and if set won't call offload/unoffload
sample.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
PTP is currently only supported on E810 devices, it is checked
in ice_ptp_init(). However, there is no check in ice_ptp_release().
For other E800 series devices, ice_ptp_release() will be wrongly executed.
Fix the following calltrace.
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
Workqueue: ice ice_service_task [ice]
Call Trace:
dump_stack_lvl+0x5b/0x82
dump_stack+0x10/0x12
register_lock_class+0x495/0x4a0
? find_held_lock+0x3c/0xb0
__lock_acquire+0x71/0x1830
lock_acquire+0x1e6/0x330
? ice_ptp_release+0x3c/0x1e0 [ice]
? _raw_spin_lock+0x19/0x70
? ice_ptp_release+0x3c/0x1e0 [ice]
_raw_spin_lock+0x38/0x70
? ice_ptp_release+0x3c/0x1e0 [ice]
ice_ptp_release+0x3c/0x1e0 [ice]
ice_prepare_for_reset+0xcb/0xe0 [ice]
ice_do_reset+0x38/0x110 [ice]
ice_service_task+0x138/0xf10 [ice]
? __this_cpu_preempt_check+0x13/0x20
process_one_work+0x26a/0x650
worker_thread+0x3f/0x3b0
? __kthread_parkme+0x51/0xb0
? process_one_work+0x650/0x650
kthread+0x161/0x190
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
Fixes: 4dd0d5c33c ("ice: add lock around Tx timestamp tracker flush")
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the PF is a member of a link aggregate, and the driver
is removed, the process will hang unless we respond to the
NETDEV_UNREGISTER event that is sent to the event_handler
for LAG.
Add a case statement for the ice_lag_event_handler to unlink
the PF from the link aggregate.
Also remove code that was incorrectly applying a dev_hold to
peer_netdevs that were associated with the ice driver.
Fixes: df006dd4b1 ("ice: Add initial support framework for LAG")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This reverts commit 001ce9785c.
This upstream commit broke AOSP (post Android 12 merge) build
on RB5. The device either silently crashes into USB crash mode
after android boot animation or we see a blank blue screen
with following dpu errors in dmesg:
[ T444] hw recovery is not complete for ctl:3
[ T444] [drm:dpu_encoder_phys_vid_prepare_for_kickoff:539] [dpu error]enc31 intf1 ctl 3 reset failure: -22
[ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout
[ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110
[ C7] [drm:dpu_encoder_frame_done_timeout:2127] [dpu error]enc31 frame done timeout
[ T444] [drm:dpu_encoder_phys_vid_wait_for_commit_done:513] [dpu error]vblank timeout
[ T444] [drm:dpu_kms_wait_for_commit_done:454] [dpu error]wait for commit done returned -110
Fixes: 001ce9785c ("arm64: dts: qcom: sm8250: remove bus clock from the mdss node for sm8250 target")
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211014135410.4136412-1-dmitry.baryshkov@linaro.org
The introduction of __qcom_scm_set_boot_addr_mc() relies on
cpu_logical_map() and MPIDR_AFFINITY_LEVEL() from smp_plat.h, but only
ARM and ARM64 has this include file, so the introduction of this
dependency broke compile testing on e.g. x86_64.
Make the inclusion of smp_plat.h and the affected function depend on
ARM || ARM64 to allow the code to still be compiled.
Fixes: 55845f46df ("firmware: qcom: scm: Add support for MC boot address API")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211025025816.2937465-1-bjorn.andersson@linaro.org
Currently we use fixed size u16 bitmap for subpage bitmap. This is fine
for 4K sectorsize with 64K page size.
But for 4K sectorsize and larger page size, the bitmap is too small,
while for smaller page size like 16K, u16 bitmaps waste too much space.
Here we introduce a new helper structure, btrfs_subpage_bitmap_info, to
record the proper bitmap size, and where each bitmap should start at.
By this, we can later compact all subpage bitmaps into one u32 bitmap.
This patch is the first step.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The existing calling convention of btrfs_alloc_subpage() is pretty
awful. Change it to a more common pattern by returning struct
btrfs_subpage directly and let the caller to determine if the call
succeeded.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two call sites of btrfs_alloc_subpage():
- btrfs_attach_subpage()
We have ensured sectorsize is smaller than PAGE_SIZE
- alloc_extent_buffer()
We call btrfs_alloc_subpage() unconditionally.
The alloc_extent_buffer() forces us to check the sectorsize size against
page size inside btrfs_alloc_subpage().
Since the function name, btrfs_alloc_subpage(), already indicates it
should only get called for subpage cases, do the check in
alloc_extent_buffer() and add an ASSERT() in btrfs_alloc_subpage().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Update it since commit 944d3f9fac ("btrfs: switch seed device to
list api") did conversion from fs_devices::seed to fs_devices::seed_list.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Su Yue <l@damenly.su>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need for the variable ret after d66105cfa873 ("btrfs:
allocate btrfs_ioctl_quota_rescan_args on stack"), remove it.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The out label is being overused, we can simply return if the condition
permits.
No functional changes.
Reviewed-by: Su Yue <l@damenly.su>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The user facing function used to allocate new chunks is
btrfs_chunk_alloc, unfortunately there is yet another similar sounding
function - btrfs_alloc_chunk. This creates confusion, especially since
the latter function can be considered "private" in the sense that it
implements the first stage of chunk creation and as such is called by
btrfs_chunk_alloc.
To avoid the awkwardness that comes with having similarly named but
distinctly different in their purpose function rename btrfs_alloc_chunk
to btrfs_create_chunk, given that the main purpose of this function is
to orchestrate the whole process of allocating a chunk - reserving space
into devices, deciding on characteristics of the stripe size and
creating the in-memory structures.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
kunit.py currently crashes and fails to parse kernel output if it's not
fully valid utf-8.
This can come from memory corruption or just inadvertently printing
out binary data as strings.
E.g. adding this line into a kunit test
pr_info("\x80")
will cause this exception
UnicodeDecodeError: 'utf-8' codec can't decode byte 0x80 in position
1961: invalid start byte
We can tell Python how to handle errors, see
https://docs.python.org/3/library/codecs.html#error-handlers
Unfortunately, it doesn't seem like there's a way to specify this in
just one location, so we need to repeat ourselves quite a bit.
Specify `errors='backslashreplace'` so we instead:
* print out the offending byte as '\x80'
* try and continue parsing the output.
* as long as the TAP lines themselves are valid, we're fine.
Fixed spelling/grammar in commit log:
Shuah Khan <<skhan@linuxfoundation.org>
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 110860541f ("mm/secretmem: use refcount_t instead of atomic_t")
attempted to fix the problem of secretmem_users wrapping to zero and
allowing suspend once again.
But it was reverted in commit 87066fdd2e ("Revert 'mm/secretmem: use
refcount_t instead of atomic_t'") because of the problems it caused - a
refcount_t was not semantically the right type to use.
Instead prevent secretmem_users from wrapping to zero by forbidding new
users if the number of users has wrapped from positive to negative.
This stops a long way short of reaching the necessary 4 billion users
where it wraps to zero again, so there's no need to be clever with
special anti-wrap types or checking the return value from atomic_inc().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jordy Zomer <jordy@pwning.systems>
Cc: Kees Cook <keescook@chromium.org>,
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it go through appropriate helpers.
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 406f42fa0d ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it go through appropriate helpers.
Convert bluetooth from memcpy(... ETH_ADDR) to eth_hw_addr_set():
@@
expression dev, np;
@@
- memcpy(dev->dev_addr, np, ETH_ALEN)
+ eth_hw_addr_set(dev, np)
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to return always zero for function which is not
supported, especially since 0 is the wrong return code.
Fixes: a7efd7773e ("qedr: Add support for PD,PKEY and CQ verbs")
Link: https://lore.kernel.org/r/20211025062632.3960-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit efafec27c5 ("spi: Fix tegra20 build with CONFIG_PM=n") already
fixed the build without PM support once. There was an alternative fix
by Guenter in commit 2bab94090b ("spi: tegra20-slink: Declare runtime
suspend and resume functions conditionally"), and Mark then merged the
two correctly in ffb1e76f4f ("Merge tag 'v5.15-rc2' into spi-5.15").
But for some inexplicable reason, Mark then merged things _again_ in
commit 59c4e190b1 ("Merge tag 'v5.15-rc3' into spi-5.15"), and screwed
things up at that point, and the __maybe_unused attribute on
tegra_slink_runtime_resume() went missing.
Reinstate it, so that alpha (and other architectures without PM support)
builds cleanly again.
Btw, this is another prime example of how random back-merges are not
good. Just don't do them. Subsystem developers should not merge my
tree in any normal circumstances. Both of those merge commits pointed
to above are bad: even the one that got the merge result right doesn't
even mention _why_ it was done, and the one that got it wrong is
obviously broken.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The spin lock in struct irdma_qp_uk is not used. So remove it.
Link: https://lore.kernel.org/r/20211021230612.153812-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
