Applications determine loop support in part by querying the 'pls' sysfs
node. Reporting of 'pls' (Private Loop Support) is derived from the
descriptor returned by the COMMON_GET_SLI4_PARAMETERS mailbox command,
which is issued during initialization or after a reset.
The value of this field may change if there is a dynamic SFP change. The
driver currently will not pick up the change as there was no reset
scenario.
Rework to commonize the sending of the COMMON_GET_SLI4_PARAMETERS
command. Add the calling of the routine after receipt of an async event
indicating an SFP change.
Link: https://lore.kernel.org/r/20211020211417.88754-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
A prior patch introduced HBA_NEEDS_CFG_PORT flag logic, but in
lpfc_sli_brdrestart_s3() code path, right after HBA_NEEDS_CFG_PORT is set,
the phba->hba_flag is cleared in lpfc_sli_brdreset().
Fix by calling lpfc_sli_chipset_init() to wait for successful restart of
the HBA in lpfc_host_reset_handler() after lpfc_sli_brdrestart().
lpfc_sli_chipset_init() sets the HBA_NEEDS_CFG_PORT flag so that the
lpfc_sli_hba_setup() routine from lpfc_online() will execute
lpfc_sli_config_port() initialization step when the brdrestart is
successful.
Link: https://lore.kernel.org/r/20211020211417.88754-3-jsmart2021@gmail.com
Fixes: d2f2547efd ("scsi: lpfc: Fix auto sli_mode and its effect on CONFIG_PORT for SLI3")
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In cases when lpfc_enable_pci_dev() fails, lpfc_printf_log() with
LOG_TRACE_EVENT set will call lpfc_dmp_dbg() which uses the
phba->port_list_lock.
However, phba->port_list_lock does not get initialized until
lpfc_setup_driver_resource_phase1(). Thus, any initialization routine with
LOG_TRACE_EVENT log message prior to lpfc_setup_driver_resource_phase1()
will crash.
Revert LOG_TRACE_EVENT back to LOG_INIT for all log messages in routines
prior to lpfc_setup_driver_resource_phase1().
Link: https://lore.kernel.org/r/20211020211417.88754-2-jsmart2021@gmail.com
CC: Zheyu Ma <zheyuma97@gmail.com>
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
sched_clock() is not meant to be used in portable driver code, and assuming
a particular clock frequency is not how this is meant to be used. It also
causes a build failure because of a missing header inclusion:
drivers/scsi/ufs/ufs-mediatek.c:321:12: error: implicit declaration of function 'sched_clock' [-Werror,-Wimplicit-function-declaration]
timeout = sched_clock() + retry_ms * 1000000UL;
A better interface to use here ktime_get_mono_fast_ns(), which works mostly
like ktime_get() but is safe to use inside of a suspend callback.
Link: https://lore.kernel.org/r/20211018132022.2281589-1-arnd@kernel.org
Fixes: 9561f58442 ("scsi: ufs: mediatek: Support vops pre suspend to disable auto-hibern8")
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit a264cf5e81 ("scsi: ibmvfc: Fix command state accounting and stale
response detection") introduced a regression in detecting duplicate
responses. This was observed in test where a command was sent to the VIOS
and completed before ibmvfc_send_event() set the active flag to 1, which
resulted in the atomic_dec_if_positive() call in ibmvfc_handle_crq()
thinking this was a duplicate response, which resulted in scsi_done() not
getting called, so we then hit a SCSI command timeout for this command once
the timeout expires. This simply ensures the active flag gets set prior to
making the hcall to send the command to the VIOS, in order to close this
window.
Link: https://lore.kernel.org/r/20211019152129.16558-1-brking@linux.vnet.ibm.com
Fixes: a264cf5e81 ("scsi: ibmvfc: Fix command state accounting and stale response detection")
Cc: stable@vger.kernel.org
Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This symbol is not used outside of mpt3sas_ctl.c, mark it static.
Fixes the following sparse warning:
drivers/scsi/mpt3sas/mpt3sas_ctl.c:3988:18: warning: symbol
'mpt3sas_dev_attrs' was not declared. Should it be static?
Link: https://lore.kernel.org/r/1634639239-2892-1-git-send-email-jiapeng.chong@linux.alibaba.com
Fixes: 1bb3ca27d2 ("scsi: mpt3sas: Switch to attribute groups")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This patch fixes the following Coccinelle warning:
net/bpf/test_run.c:361:8-15: WARNING opportunity for memdup_user
net/bpf/test_run.c:1055:8-15: WARNING opportunity for memdup_user
Use memdup_user rather than duplicating its implementation
This is a little bit restricted to reduce false positives
Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/1634556651-38702-1-git-send-email-wangqing@vivo.com
Some new verifier tests that hit some important gaps in the parameter
space for atomic ops.
There are already exhaustive tests for the JIT part in
lib/test_bpf.c, but these exercise the verifier too.
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211015093318.1273686-1-jackmanb@google.com
There's a mistake in commit 2be7828c9f ("get rid of autofs_getpath()")
that affects kernels from v5.13.0, basically missed because of me not
fully testing the change for Al.
The problem is that the hash calculation for the wait name qstr hasn't
been updated to account for the change to use dentry_path_raw(). This
prevents the correct matching an existing wait resulting in multiple
notifications being sent to the daemon for the same mount which must
not occur.
The problem wasn't discovered earlier because it only occurs when
multiple processes trigger a request for the same mount concurrently
so it only shows up in more aggressive testing.
Fixes: 2be7828c9f ("get rid of autofs_getpath()")
Cc: stable@vger.kernel.org
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kzalloc() function.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use "flexible array members" [1] for these cases. The
older style of one-element or zero-length arrays should no longer be
used[2].
Also, make use of the struct_size() helper in kzalloc().
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the struct_size() helper to do the arithmetic instead of the
argument "size + size * count" in the kzalloc() function.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
In this case these are not actually dynamic sizes: all the operands
involved in the calculation are constant values. However it is better to
refactor them anyway, just to keep the open-coded math idiom out of
code.
So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kzalloc() functions.
This code was detected with the help of Coccinelle and audited and fixed
manually.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Use 2-factor argument multiplication form kvcalloc() instead of
kvzalloc().
Link: https://github.com/KSPP/linux/issues/162
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Like the c630, the OnePlus 6 is also capable of using both antenna
channels for 2.4 and 5ghz wifi, however unlike the c630 only the first
channel is used for bluetooth.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020163557.291803-1-caleb@connolly.tech
Add support to add/delete channel specific filter using tc-flower.
For now, only supported action is "skip_sw hw_tc <tc_num>"
Filter criteria is specific to channel and it can be
combination of L3, L3+L4, L2+L4.
Example:
MATCH criteria Action
---------------------------
src and/or dest IPv4[6]/mask -> Forward to "hw_tc <tc_num>"
dest IPv4[6]/mask + dest L4 port -> Forward to "hw_tc <tc_num>"
dest MAC + dest L4 port -> Forward to "hw_tc <tc_num>"
src IPv4[6]/mask + src L4 port -> Forward to "hw_tc <tc_num>"
src MAC + src L4 port -> Forward to "hw_tc <tc_num>"
Adding tc-flower filter for channel using "hw_tc"
-------------------------------------------------
tc qdisc add dev <ethX> clsact
Above two steps are only needed the first time when adding
tc-flower filter.
tc filter add dev <ethX> protocol ip ingress prio 1 flower \
dst_ip 192.168.0.1/32 ip_proto tcp dst_port 5001 \
skip_sw hw_tc 1
tc filter show dev <ethX> ingress
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1 hw_tc 1
eth_type ipv4
ip_proto tcp
dst_ip 192.168.0.1
dst_port 5001
skip_sw
in_hw in_hw_count 1
Delete specific filter:
-------------------------
tc filter del dev <ethx> ingress pref 1 handle 0x1 flower
Delete All filters:
------------------
tc filter del dev <ethX> ingress
Co-developed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support in driver for TC_QDISC_SETUP_MQPRIO. This support
enables instantiation of channels in HW using existing MQPRIO
infrastructure which is extended to be offloadable. This
provides a mechanism to configure dedicated set of queues for
each TC.
Configuring channels using "tc mqprio":
--------------------------------------
tc qdisc add dev <ethX> root mqprio num_tc 3 map 0 1 2 \
queues 4@0 4@4 4@8 hw 1 mode channel
Above command configures 3 TCs having 4 queues each. "hw 1 mode channel"
implies offload of channel configuration to HW. When driver processes
configuration received via "ndo_setup_tc: QDISC_SETUP_MQPRIO", each
TC maps to HW VSI with specified queues.
User can optionally specify bandwidth min and max rate limit per TC
(see example below). If shaper params like min and/or max bandwidth
rate limit are specified, driver configures VSI specific rate limiter
in HW.
Configuring channels and bandwidth shaper parameters using "tc mqprio":
----------------------------------------------------------------
tc qdisc add dev <ethX> root mqprio \
num_tc 4 map 0 1 2 3 queues 4@0 4@4 4@8 4@12 hw 1 mode channel \
shaper bw_rlimit min_rate 1Gbit 2Gbit 3Gbit 4Gbit \
max_rate 4Gbit 5Gbit 6Gbit 7Gbit
Command to view configured TCs:
-----------------------------
tc qdisc show dev <ethX>
Deleting TCs:
------------
tc qdisc del dev <ethX> root mqprio
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add infrastructure required for "ndo_setup_tc:qdisc_mqprio".
ice_vsi_setup is modified to configure traffic classes based
on mqprio data received from the stack. This includes low-level
functions to configure min, max rate-limit parameters in hardware
for traffic classes. Each traffic class gets mapped to a hardware
channel (VSI) which can be individually configured with different
bandwidth parameters.
Co-developed-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Tarun Singh <tarun.k.singh@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The 'struct attribute' flex array contains some struct lock_class_key's
which become big when lockdep is turned on. Big enough that some drivers
will not load when CONFIG_PROVE_LOCKING=y because they cannot allocate
enough memory:
WARNING: CPU: 36 PID: 8 at mm/page_alloc.c:5350 __alloc_pages+0x27e/0x3e0
Call Trace:
kmalloc_order+0x2a/0xb0
kmalloc_order_trace+0x19/0xf0
__kmalloc+0x231/0x270
ib_setup_port_attrs+0xd8/0x870 [ib_core]
ib_register_device+0x419/0x4e0 [ib_core]
bnxt_re_task+0x208/0x2d0 [bnxt_re]
Link: https://lore.kernel.org/r/20211019002656.17745-1-wangyugui@e16-tech.com
Signed-off-by: wangyugui <wangyugui@e16-tech.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The function irdma_uk_cq_init always returns 0, so make it void and delete
all the return value checks.
Link: https://lore.kernel.org/r/20211019153717.3836-1-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Commit e72aeb9ee0 ("fq_codel: implement L4S style ce_threshold_ect1
marking") expanded the ce_threshold feature of FQ-CoDel so it can
be applied to a subset of the traffic, using the ECT(1) bit of the ECN
field as the classifier. However, hard-coding ECT(1) as the only
classifier for this feature seems limiting, so let's expand it to be more
general.
To this end, change the parameter from a ce_threshold_ect1 boolean, to a
one-byte selector/mask pair (ce_threshold_{selector,mask}) which is applied
to the whole diffserv/ECN field in the IP header. This makes it possible to
classify packets by any value in either the ECN field or the diffserv
field. In particular, setting a selector of INET_ECN_ECT_1 and a mask of
INET_ECN_MASK corresponds to the functionality before this patch, and a
mask of ~INET_ECN_MASK allows using the selector as a straight-forward
match against a diffserv code point:
# apply ce_threshold to ECT(1) traffic
tc qdisc replace dev eth0 root fq_codel ce_threshold 1ms ce_threshold_selector 0x1/0x3
# apply ce_threshold to ECN-capable traffic marked as diffserv AF22
tc qdisc replace dev eth0 root fq_codel ce_threshold 1ms ce_threshold_selector 0x50/0xfc
Regardless of the selector chosen, the normal rules for ECN-marking of
packets still apply, i.e., the flow must still declare itself ECN-capable
by setting one of the bits in the ECN field to get marked at all.
v2:
- Add tc usage examples to patch description
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20211019174709.69081-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rpc_task_set_client(), testing for a NULL clnt is not necessary, as
clnt should always be a valid pointer to a rpc_client.
Signed-off-by: Thiago Rafael Becker <trbecker@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
All the callers are now in client.c so we can remove the
EXPORT_SYMBOL_GPL() and make it static.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This lets us update the server's attributes when the user does a "mount
-o remount" on the filesystem.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up. There are a few places where we want to probe the server, but
don't actually care about the fsinfo result. Change these to use
nfs_probe_server(), which handles the fattr allocation for us.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
And rename it to nfs_probe_server(). I also change it to take the nfs_fh
as an argument so callers can choose what filehandle to probe.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
And call it before doing an FSINFO probe to reset to the baseline
capabilities before probing.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
dprintk call sites that display no other information than the
function name can be replaced with use of the trace "function" or
"function_graph" plug-ins.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
These new events report slightly different information for readpage
and readpages/readahead.
For readpage:
fsx-1387 [006] 380.761896: nfs_aop_readpage: fileid=00:28:2 fhandle=0x36fbbe51 version=1752899355910932437 offset=131072
fsx-1387 [006] 380.761900: nfs_aop_readpage_done: fileid=00:28:2 fhandle=0x36fbbe51 version=1752899355910932437 offset=131072 ret=0
The index of a synchronous single-page read is reported.
For readpages:
fsx-1387 [006] 380.760847: nfs_aop_readahead: fileid=00:28:2 fhandle=0x36fbbe51 version=1752899355909932456 nr_pages=3
fsx-1387 [006] 380.760853: nfs_aop_readahead_done: fileid=00:28:2 fhandle=0x36fbbe51 version=1752899355909932456 nr_pages=3 ret=0
The count of pages requested is reported. nfs_readpages does not
wait for the READ requests to complete.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: BIT() is preferred over open-coding the shift.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
For certain special cases, RPC-related tracepoints record a -1 as
the task ID or the client ID. It's ugly for a trace event to display
4 billion in these cases.
To help keep SUNRPC tracepoints consistent, create a macro that
defines the print format specifiers for tk_pid and cl_clid. At some
point in the future we might try tk_pid with a wider range of values
than 0..64K so this makes it easier to make that change.
RPC tracepoints now look like this:
<...>-1276 [009] 149.720358: rpc_clnt_new: client=00000005 peer=[192.168.2.55]:20049 program=nfs server=klimt.ib
<...>-1342 [004] 149.921234: rpc_xdr_recvfrom: task:0000001a@00000005 head=[0xff1242d9ab6dc01c,144] page=0 tail=[(nil),0] len=144
<...>-1342 [004] 149.921235: xprt_release_cong: task:0000001a@00000005 snd_task:ffffffff cong=256 cwnd=16384
<...>-1342 [004] 149.921235: xprt_put_cong: task:0000001a@00000005 snd_task:ffffffff cong=0 cwnd=16384
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Clean up: this field is no longer used.
xprt_rdma_pad_optimize is also no longer used, but is left in place
because it is part of the kernel/userspace API.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This is a buffer to be left persistently registered while a
connection is up. Connection tear-down will automatically DMA-unmap,
invalidate, and dereg the MR. A persistently registered buffer is
lower in cost to provide, and it can never be coalesced into the
RDMA segment that carries the data payload.
An RPC that provisions a Write chunk with a non-aligned length now
uses this MR rather than the tail buffer of the RPC's rq_rcv_buf.
Reviewed-By: Tom Talpey <tom@talpey.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Save some space in the nfs_inode by setting up an anonymous union with
the fields that are peculiar to a specific type of filesystem object.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We mustn't call nfs_wb_all() on anything other than a regular file.
Furthermore, we can exit early when we don't hold a delegation.
Reported-by: David Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If O_DIRECT bumps the commit_info rpcs_out field, then that could lead
to fsync() hangs. The fix is to ensure that O_DIRECT calls
nfs_commit_end().
Fixes: 723c921e7d ("sched/wait, fs/nfs: Convert wait_on_atomic_t() usage to the new wait_var_event() API")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Convert math emulation code to the new register storage
mechanism in preparation for dynamically sized buffers.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145322.711347464@linutronix.de
Convert the rest of the core code to the new register storage mechanism in
preparation for dynamically sized buffers.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211013145322.659456185@linutronix.de
- A series from Marcel Ziswiler to update imx_v6_v7_defconfig for the
new Colibri iMX6ULL eMMC variant support.
- Enable HID I2C in the imx_v6_v7_defconfig as it is used for a HID
compliant wacom device on the reMarkable2 tablet.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmFq1uwUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7GsAf+Ke0evf++bsvZnsdNW7UPQAtjnYgK
tNnQb97q5yz904u0tIRRjg2Qug+e2ohasxAUK2v0Jg58paYpVEmK7Kfa91BIds8F
Zw1rXAw3owyxt5VfWw5GT8TQEm/3MyMQvKJKdvTuSL+LEPcVIfXU88Us0oh9zSIj
SS2HFI6xmjCFI8JDgctGZcKBoTCJQlycI1lwdA7gpXXcJ4XJepxpzxtOobXKoDuv
KAJNSSGjY933y8HlImXFKol0KABlVB/ievV48PDvktQ3Rj526AG+ElB0m48YU7wQ
36hDX1Vmoun9L6QuICizklATNTwfT7O6fxEOpWJuFNja1orKzMXSyoatcA==
=DPy3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=aROW
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfigs
i.MX defconfig update for 5.16:
- A series from Marcel Ziswiler to update imx_v6_v7_defconfig for the
new Colibri iMX6ULL eMMC variant support.
- Enable HID I2C in the imx_v6_v7_defconfig as it is used for a HID
compliant wacom device on the reMarkable2 tablet.
* tag 'imx-defconfig-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable HID I2C
ARM: imx_v6_v7_defconfig: enable bpf syscall and cgroup bpf
ARM: imx_v6_v7_defconfig: build imx sdma driver as module
ARM: imx_v6_v7_defconfig: rebuild default configuration
ARM: imx_v6_v7_defconfig: change snd soc tlv320aic3x to i2c variant
ARM: imx_v6_v7_defconfig: enable mtd physmap
Link: https://lore.kernel.org/r/20211016140138.1603-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Allow building the reset-brcmstb-rescal driver as module, add reset
lines for the Uniphier PXs3 audio and video input subsystems and
bindings for the Uniphier NX1 SoC, and add lan966x switch reset support
to the reset-microchip-sparx5 driver.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCYXBBkBcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwCF/AQDzczjKGzRt7UT5nGCRFs6cxI5R
QsTnpRTIcBfxGFrKAQEAvagsMyYOZgadazUZ1pWm8VfZ5yyVDCkR4mPtXy6DXAA=
=hBbU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=L2UE
-----END PGP SIGNATURE-----
Merge tag 'reset-for-v5.16' of git://git.pengutronix.de/pza/linux into arm/drivers
Reset controller updates for v5.16
Allow building the reset-brcmstb-rescal driver as module, add reset
lines for the Uniphier PXs3 audio and video input subsystems and
bindings for the Uniphier NX1 SoC, and add lan966x switch reset support
to the reset-microchip-sparx5 driver.
* tag 'reset-for-v5.16' of git://git.pengutronix.de/pza/linux:
reset: mchp: sparx5: Extend support for lan966x
dt-bindings: reset: Add lan966x support
reset: uniphier: Add NX1 reset support
dt-bindings: reset: uniphier: Add NX1 reset control binding
reset: uniphier: Add audio system and video input reset control for PXs3
reset: Allow building Broadcom STB RESCAL as module
Link: https://lore.kernel.org/r/96e686f78f0e42bad666df5ec0cbcb2dcdc270a3.camel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
