The link training delays are different and/or available in different
DPCD offsets depending on:
- Clock recovery vs. channel equalization
- DPRX vs. LTTPR
- 128b/132b vs. 8b/10b
- DPCD 1.4+ vs. earlier
Add helpers to get the correct delays in us, reading DPCD if
necessary. This is more straightforward than trying to retrofit the
existing helpers to take 128b/132b into account.
Having to pass in the DPCD receiver cap field seems unavoidable, because
reading it involves checking the revision and reading extended receiver
cap. So unfortunately the interface is mixed cached and read as needed.
v2: Remove delay_us < 0 check and the whole local var (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211014150059.28957-1-jani.nikula@intel.com
The branch is a stable branch shared with ARM maintainers for the
first 13th patches of the series:
It is based on v5.14-rc3.
As stated by the changelog:
" [... ] enabling ARMv8.6 support for timer subsystem, and was prompted by a
discussion with Oliver around the fact that an ARMv8.6 implementation
must have a 1GHz counter, which leads to a number of things to break
in the timer code:
- the counter rollover can come pretty quickly as we only advertise a
56bit counter,
- the maximum timer delta can be remarkably small, as we use the
countdown interface which is limited to 32bit...
Thankfully, there is a way out: we can compute the minimal width of
the counter based on the guarantees that the architecture gives us,
and we can use the 64bit comparator interface instead of the countdown
to program the timer.
Finally, we start making use of the ARMv8.6 ECV features by switching
accesses to the counters to a self-synchronising register, removing
the need for an ISB. Hopefully, implementations will *not* just stick
an invisible ISB there...
A side effect of the switch to CVAL is that XGene-1 breaks. I have
added a workaround to keep it alive.
I have added Oliver's original patch[0] to the series and tweaked a
couple of things. Blame me if I broke anything.
The whole things has been tested on Juno (sysreg + MMIO timers),
XGene-1 (broken sysreg timers), FVP (FEAT_ECV, CNT*CTSS_EL0).
"
Link: https://lore.kernel.org/r/20211017124225.3018098-1-maz@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
This memory frequency calculated is only used to check if it is zero,
what is not useful as it will never actually be zero.
Also the calculation is wrong, we should be checking other bit to
select the appropriate frequency multiplier while this code is stuck
with a fixed multiplier.
So here dropping it as whole.
v2:
- Also remove memory frequency calculation for gen9 LP platforms
Cc: Yakui Zhao <yakui.zhao@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Fixes: 5d0c938ec9 ("drm/i915/gen11+: Only load DRAM information from pcode")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211013010046.91858-1-jose.souza@intel.com
(cherry picked from commit 83f52364b1)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In the counter subsystem, we are already using sysfs_emit(), but there
were a few places where we were still using sprintf() in *_show()
functions. For consistency and added protections, use sysfs_emit()
everywhere.
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/20211017190106.3472645-1-david@lechnology.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When endpoint_alloc() return failed in xillyusb_setup_base_eps(),
'xdev->msg_ep' will be freed but not set to NULL. That lets program
enter fail handling to cleanup_dev() in xillyusb_probe(). Check for
'xdev->msg_ep' is invalid in cleanup_dev() because 'xdev->msg_ep' did
not set to NULL when was freed. So the UAF problem for 'xdev->msg_ep'
is triggered.
==================================================================
BUG: KASAN: use-after-free in fifo_mem_release+0x1f4/0x210
CPU: 0 PID: 166 Comm: kworker/0:2 Not tainted 5.15.0-rc5+ #19
Call Trace:
dump_stack_lvl+0xe2/0x152
print_address_description.constprop.0+0x21/0x140
? fifo_mem_release+0x1f4/0x210
kasan_report.cold+0x7f/0x11b
? xillyusb_probe+0x530/0x700
? fifo_mem_release+0x1f4/0x210
fifo_mem_release+0x1f4/0x210
? __sanitizer_cov_trace_pc+0x1d/0x50
endpoint_dealloc+0x35/0x2b0
cleanup_dev+0x90/0x120
xillyusb_probe+0x59a/0x700
...
Freed by task 166:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x109/0x140
kfree+0x117/0x4c0
xillyusb_probe+0x606/0x700
Set 'xdev->msg_ep' to NULL after being freed in xillyusb_setup_base_eps()
to fix the UAF problem.
Fixes: a53d1202ae ("char: xillybus: Add driver for XillyUSB (Xillybus variant for USB)")
Cc: stable <stable@vger.kernel.org>
Acked-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/r/20211016052047.1611983-1-william.xuanziyang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When freeing txn buffers, binder_transaction_buffer_release()
attempts to detect whether the current context is the target by
comparing current->group_leader to proc->tsk. This is an unreliable
test. Instead explicitly pass an 'is_failure' boolean.
Detecting the sender was being used as a way to tell if the
transaction failed to be sent. When cleaning up after
failing to send a transaction, there is no need to close
the fds associated with a BINDER_TYPE_FDA object. Now
'is_failure' can be used to accurately detect this case.
Fixes: 44d8047f1d ("binder: use standard functions to allocate fds")
Cc: stable <stable@vger.kernel.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20211015233811.3532235-1-tkjos@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Add a new uAPI (under the memory ioctl) to request from the driver
to export a DMA-BUF object that represents a memory region on
the device's DRAM. This is needed to enable peer-to-peer over PCIe
between habana device and an RDMA adapter (e.g. mlnx5 or efa
rdma adapter).
- Add debugfs node to dynamically configure CS timeout. Up until now,
it was only configurable through kernel module parameter.
- Fetch more comprehensive power information from the firmware.
- Always take timestamp when waiting for user interrupt, as the user
needs that information to optimize the graph runtime compilation.
- Modify user interrupt to look on 64-bit user value as fence, instead
of 32-bit.
- Bypass reset in case of repeated h/w error event after device reset.
This is to prevent endless loop of resets to the device.
- Fix several bugs in multi CS completion code.
- Fix race condition in fd close/open.
- Update to latest firmware headers
- Add select CRC32 in kconfig
- Small fixes, cosmetics
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmFtPa4ACgkQZR1NuKta
54A9NAf/QJOc72XhqinNm62RvUoZQehNyDFHcYYBORqIpC+/NsggWwy0VdrDHSeg
uXmt6qwRUCc1+tOjOcFD/b6pnwz16mEqQrmVO8XiZOiCvIGcDEapq0HqGfEXwYtv
NcQ+k682qqXlza6SCZS9/webJzRuhHwxdFP9HTEYLhKmHoOgBza63F6dreku/fEG
mCDVtnMbo8Sa98657Jz3yTElhA+JPsDYO6PycZUTGdPn38mzz5Y5o6Ds8SshIXbr
ZQQxHope7NkqcnfYQ8nIoyl7bPLBv2NaqNz216+sBVVy+kHx6f1+FJ4hJM+PHi20
CuOiUgVBRKp2LJ2k0HoITy5XiXe/Cg==
=bzK+
-----END PGP SIGNATURE-----
Merge tag 'misc-habanalabs-next-2021-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-next
Oded writes:
This tag contains habanalabs driver changes for v5.16:
- Add a new uAPI (under the memory ioctl) to request from the driver
to export a DMA-BUF object that represents a memory region on
the device's DRAM. This is needed to enable peer-to-peer over PCIe
between habana device and an RDMA adapter (e.g. mlnx5 or efa
rdma adapter).
- Add debugfs node to dynamically configure CS timeout. Up until now,
it was only configurable through kernel module parameter.
- Fetch more comprehensive power information from the firmware.
- Always take timestamp when waiting for user interrupt, as the user
needs that information to optimize the graph runtime compilation.
- Modify user interrupt to look on 64-bit user value as fence, instead
of 32-bit.
- Bypass reset in case of repeated h/w error event after device reset.
This is to prevent endless loop of resets to the device.
- Fix several bugs in multi CS completion code.
- Fix race condition in fd close/open.
- Update to latest firmware headers
- Add select CRC32 in kconfig
- Small fixes, cosmetics
* tag 'misc-habanalabs-next-2021-10-18' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux: (25 commits)
habanalabs: refactor fence handling in hl_cs_poll_fences
habanalabs: context cleanup cosmetics
habanalabs: simplify wait for interrupt with timestamp flow
habanalabs: initialize hpriv fields before adding new node
habanalabs: Unify frequency set/get functionality
habanalabs: select CRC32
habanalabs: add support for dma-buf exporter
habanalabs: define uAPI to export FD for DMA-BUF
habanalabs: fix NULL pointer dereference
habanalabs: fix race condition in multi CS completion
habanalabs: use only u32
habanalabs: update firmware files
habanalabs: bypass reset for continuous h/w error event
habanalabs: take timestamp on wait for interrupt
habanalabs: prevent race between fd close/open
habanalabs: refactor reset log message
habanalabs: define soft-reset as inference op
habanalabs: fix debugfs device memory MMU VA translation
habanalabs: add support for a long interrupt target value
habanalabs: remove redundant cs validity checks
...
Currently, we check the wb_err too early for directories, before all of
the unsafe child requests have been waited on. In order to fix that we
need to check the mapping->wb_err later nearer to the end of ceph_fsync.
We also have an overly-complex method for tracking errors after
blocklisting. The errors recorded in cleanup_session_requests go to a
completely separate field in the inode, but we end up reporting them the
same way we would for any other error (in fsync).
There's no real benefit to tracking these errors in two different
places, since the only reporting mechanism for them is in fsync, and
we'd need to advance them both every time.
Given that, we can just remove i_meta_err, and convert the places that
used it to instead just use mapping->wb_err instead. That also fixes
the original problem by ensuring that we do a check_and_advance of the
wb_err at the end of the fsync op.
Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/52864
Reported-by: Patrick Donnelly <pdonnell@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Currently when mounting, we may end up finding an existing superblock
that corresponds to a blocklisted MDS client. This means that the new
mount ends up being unusable.
If we've found an existing superblock with a client that is already
blocklisted, and the client is not configured to recover on its own,
fail the match. Ditto if the superblock has been forcibly unmounted.
While we're in here, also rename "other" to the more conventional "fsc".
Cc: stable@vger.kernel.org
URL: https://bugzilla.redhat.com/show_bug.cgi?id=1901499
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Remove the redundant first 'if' statement of two identical ones.
In rtw_cmd_thread() there are two identical 'if' statement, one
immediately after the other. They check whether or not the device is
removed or the driver is stopped and, if true, they break a 'while'
loop.
The only noteworthy context difference is that the second statement is
within a block labelled "_next". The code has a 'goto' to the "_next"
label so that the checking is performed each time the above directive
is encountered. Instead, the first 'if' is before the "_next" label.
One of the two must be removed and that it must be the one before the
label because "bSurpriseRemoved" as well as "bDriverStopped" may be
changed asynchronously by other code of the driver and so they should be
checked at each jump to "_next".
Tested with "ASUSTek Computer, Inc. Realtek 8188EUS [USB-N10 Nano]".
Acked-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20211018162006.5527-4-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_enqueue_cmd() uses a semaphore to notify rtw_cmd_thread() that it
has enqueued commands. rtw_cmd_thread() "down(s)" in interruptible mode
to wait to be notified.
Use completion variables because they are better suited for the purpose.
In rtw_cmd_thread(), wait in uninterruptible mode, even if the original
code uses down_interruptible(), because the interruption of
rtw_cmd_thread() is not allowed and unwanted.
Tested with "ASUSTek Computer, Inc. Realtek 8188EUS [USB-N10 Nano]".
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20211018162006.5527-3-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rtw_cmd_thread() "up(s)" a semaphore twice, first to notify callers when
its execution is started and then to notify when it is about to end.
It makes the same semaphore go "up" twice in the same thread. This
construct makes Smatch to warn of duplicate "up(s)".
This thread uses interruptible semaphores where instead completions are
more suitable. For this purpose it calls an helper (_rtw_down_sema())
that returns values that are never checked. It may lead to bugs.
To address the above-mentioned issues, use two completions variables
instead of semaphores. Use the uninterruptible versions of
wake_for_completion*() because the interruptible / killable versions are
not necessary.
Tested with "ASUSTek Computer, Inc. Realtek 8188EUS [USB-N10 Nano]".
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20211018162006.5527-2-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace strncpy with strlcpy to fix the following gcc warning.
drivers/staging/r8188eu/os_dep/ioctl_linux.c: In function 'rtw_wx_set_enc_ext':
drivers/staging/r8188eu/os_dep/ioctl_linux.c:1929:9: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation]
1929 | strncpy((char *)param->u.crypt.alg, alg_name, IEEE_CRYPT_ALG_NAME_LEN);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The destination buffer size is IEEE_CRYPT_ALG_NAME_LEN and the length
of the string to copy is always < IEEE_CRYPT_ALG_NAME_LEN. So strlcpy
will never truncate the string.
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20211018221231.7837-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nodes for 'i2s' and 'nand' have no driver present inside the linux tree.
The normal approach for a dts file to be mainlined is start with those stuff
which is already mainlined and get rid of the other stuff. If needed it will
be properly added afterwards together with the suitable device driver. Hence,
remove both nodes from the device tree include file.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20211018170206.11959-1-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without CONFIG_PM_SLEEP, the runtime suspend/resume functions
are unused, producing a warning:
drivers/iio/adc/imx8qxp-adc.c:433:12: error: 'imx8qxp_adc_runtime_resume' defined but not used [-Werror=unused-function]
433 | static int imx8qxp_adc_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/iio/adc/imx8qxp-adc.c:419:12: error: 'imx8qxp_adc_runtime_suspend' defined but not used [-Werror=unused-function]
419 | static int imx8qxp_adc_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Mark them as __maybe_unused to shut up the compiler.
Fixes: 1e23dcaa1a ("iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20211013144338.2261316-1-arnd@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Up to now ms5611_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The only effect of returning an error in an spi .remove() callback is
that the spi core issues a generic warning message. Instead emit a more
specific error message and return 0 to not report the same issue twice.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Up to now hmc5843_common_remove() returns zero unconditionally. Make it
return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The only effect of returning an error in an spi .remove() callback is
that the spi core issues another warning message. Don't report the same
problem twice and return 0 unconditionally instead. Also degrade the log
level to warning, as nothing really bad is expected from a failure to
put the device in suspend mode.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Up to now ad5686_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Up to now ad5592r_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Up to now ad5446_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Up to now ad5380_remove() returns zero unconditionally. Make it return
void instead which makes it easier to see in the callers that there is
no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Up to now mma7455_core_remove() returns zero unconditionally. Make it
return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Up to now kxsd9_common_remove() returns zero unconditionally. Make it
return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Up to now bmi088_accel_core_remove() returns zero unconditionally. Make
it return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Up to now bmc150_accel_core_remove() returns zero unconditionally. Make
it return void instead which makes it easier to see in the callers that
there is no error to handle.
Also the return value of i2c and spi remove callbacks is ignored anyway.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When an i2c or spi driver's remove function returns a non-zero error
code nothing happens apart from emitting a generic error message. Make
this error message more device specific and return zero instead in the
remove callbacks. As the return value of bma400_remove() is unused then,
change the function to not yield a return value.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211013203223.2694577-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This chip is able to generate waveform and using an
with the output trigger buffer will be easy to generate one.
Signed-off-by: Mihail Chindris <mihail.chindris@analog.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Link: https://lore.kernel.org/r/20211007080035.2531-7-mihail.chindris@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Now that output (kfifo) buffers are supported, we need to extend the
{devm_}iio_triggered_buffer_setup_ext() parameter list to take a direction
parameter.
This allows us to attach an output triggered buffer to a DAC device.
Unfortunately it's a bit difficult to add another macro to avoid changing 5
drivers where {devm_}iio_triggered_buffer_setup_ext() is used.
Well, it's doable, but may not be worth the trouble vs just updating all
these 5 drivers.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Mihail Chindris <mihail.chindris@analog.com>
Link: https://lore.kernel.org/r/20211007080035.2531-4-mihail.chindris@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add output buffer support to the kfifo buffer implementation.
The implementation is straight forward and mostly just wraps the kfifo
API to provide the required operations.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Mihail Chindris <mihail.chindris@analog.com>
Link: https://lore.kernel.org/r/20211007080035.2531-3-mihail.chindris@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Currently IIO only supports buffer mode for capture devices like ADCs. Add
support for buffered mode for output devices like DACs.
The output buffer implementation is analogous to the input buffer
implementation. Instead of using read() to get data from the buffer write()
is used to copy data into the buffer.
poll() with POLLOUT will wakeup if there is space available.
Drivers can remove data from a buffer using iio_pop_from_buffer(), the
function can e.g. called from a trigger handler to write the data to
hardware.
A buffer can only be either a output buffer or an input, but not both. So,
for a device that has an ADC and DAC path, this will mean 2 IIO buffers
(one for each direction).
The direction of the buffer is decided by the new direction field of the
iio_buffer struct and should be set after allocating and before registering
it.
Co-developed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Co-developed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Mihail Chindris <mihail.chindris@analog.com>
Link: https://lore.kernel.org/r/20211007080035.2531-2-mihail.chindris@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add entries from Documentation/ABI/testing/sysfs-bus-iio-scd30
to Documentation/ABI/testing/sysfs-bus-iio. The attributes of the scd4x
and scd30 are common.
Remove Documentation/ABI/testing/sysfs-bus-iio-scd30.
Signed-off-by: Roan van Dijk <roan@protonic.nl>
Link: https://lore.kernel.org/r/20211008101706.755942-5-roan@protonic.nl
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This is a driver for the SCD4x CO2 sensor from Sensirion. The sensor is
able to measure CO2 concentration, temperature and relative humdity.
The sensor uses a photoacoustic principle for measuring CO2 concentration.
An I2C interface is supported by this driver in order to communicate with
the sensor.
Signed-off-by: Roan van Dijk <roan@protonic.nl>
Link: https://lore.kernel.org/r/20211008101706.755942-4-roan@protonic.nl
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add documentation for the SCD4x carbon dioxide sensor from Sensirion.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Roan van Dijk <roan@protonic.nl>
Link: https://lore.kernel.org/r/20211008101706.755942-2-roan@protonic.nl
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928014156.1491-4-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928014156.1491-2-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928014403.1563-2-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928014403.1563-1-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928014055.1431-2-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928014055.1431-1-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928013902.1341-8-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928013902.1341-7-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928013902.1341-6-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928013902.1341-5-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928013902.1341-4-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20210928013902.1341-3-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928013902.1341-2-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
Using dev_err_probe() can reduce code size, and the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210928013902.1341-1-caihuoqing@baidu.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
