Commit graph

1,169,205 commits

Author SHA1 Message Date
Amir Tzin
5945e1adea net/mlx5: Read timeout values from init segment
Replace hard coded timeouts with values stored in firmware's init
segment. Timeouts are read from init segment during driver load. If init
segment timeouts are not supported then fallback to hard coded defaults
instead. Also move pre initialization timeouts which cannot be read from
firmware to the new mechanism.

Signed-off-by: Amir Tzin <amirtz@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-15 17:37:43 -07:00
Amir Tzin
4b2c5fa9c9 net/mlx5: Add layout to support default timeouts register
Add needed structures and defines for DTOR (default timeouts register).
This will be used to get timeouts values from FW instead of hard coded
values in the driver code thus enabling support for slower devices which
need longer timeouts.

Signed-off-by: Amir Tzin <amirtz@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-15 17:37:42 -07:00
Stefano Garzarella
ba95a6225b vsock_diag_test: remove free_sock_stat() call in test_no_sockets
In `test_no_sockets` we don't expect any sockets, indeed
check_no_sockets() prints an error and exits if `sockets` list is
not empty, so free_sock_stat() call is unnecessary since it would
only be called when the `sockets` list is empty.

This was discovered by a strange warning printed by gcc v11.2.1:
  In file included from ../../include/linux/list.h:7,
                   from vsock_diag_test.c:18:
  vsock_diag_test.c: In function ‘test_no_sockets’:
  ../../include/linux/kernel.h:35:45: error: array subscript ‘struct vsock_stat[0]’ is partly outside array bound
  s of ‘struct list_head[1]’ [-Werror=array-bounds]
     35 |         const typeof(((type *)0)->member) * __mptr = (ptr);     \
        |                                             ^~~~~~
  ../../include/linux/list.h:352:9: note: in expansion of macro ‘container_of’
    352 |         container_of(ptr, type, member)
        |         ^~~~~~~~~~~~
  ../../include/linux/list.h:393:9: note: in expansion of macro ‘list_entry’
    393 |         list_entry((pos)->member.next, typeof(*(pos)), member)
        |         ^~~~~~~~~~
  ../../include/linux/list.h:522:21: note: in expansion of macro ‘list_next_entry’
    522 |                 n = list_next_entry(pos, member);                       \
        |                     ^~~~~~~~~~~~~~~
  vsock_diag_test.c:325:9: note: in expansion of macro ‘list_for_each_entry_safe’
    325 |         list_for_each_entry_safe(st, next, sockets, list) {
        |         ^~~~~~~~~~~~~~~~~~~~~~~~
  In file included from vsock_diag_test.c:18:
  vsock_diag_test.c:333:19: note: while referencing ‘sockets’
    333 |         LIST_HEAD(sockets);
        |                   ^~~~~~~
  ../../include/linux/list.h:23:26: note: in definition of macro ‘LIST_HEAD’
     23 |         struct list_head name = LIST_HEAD_INIT(name)

It seems related to some compiler optimization and assumption
about the empty `sockets` list, since this warning is printed
only with -02 or -O3. Also removing `exit(1)` from
check_no_sockets() makes the warning disappear since in that
case free_sock_stat() can be reached also when the list is
not empty.

Reported-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211014152045.173872-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-15 17:21:34 -07:00
Jakub Kicinski
2151135a1f Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-10-14

Brett ensures RDMA nodes are removed during release and rebuild. He also
corrects fw.mgmt.api to include the patch number for proper
identification.

Dave stops ida_free() being called when an IDA has not been allocated.

Michal corrects the order of parameters being provided and the number of
entries skipped for UDP tunnels.
====================

Link: https://lore.kernel.org/r/20211014181953.3538330-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-15 17:20:16 -07:00
Dan Carpenter
2203bd0e5c drm/msm: uninitialized variable in msm_gem_import()
The msm_gem_new_impl() function cleans up after itself so there is no
need to call drm_gem_object_put().  Conceptually, it does not make sense
to call a kref_put() function until after the reference counting has
been initialized which happens immediately after this call in the
drm_gem_(private_)object_init() functions.

In the msm_gem_import() function the "obj" pointer is uninitialized, so
it will lead to a crash.

Fixes: 05b849111c ("drm/msm: prime support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211013081315.GG6010@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 16:58:14 -07:00
Dan Carpenter
027d052a36 drm/msm: fix potential NULL dereference in cleanup
The "msm_obj->node" list needs to be initialized earlier so that the
list_del() in msm_gem_free_object() doesn't experience a NULL pointer
dereference.

Fixes: 6ed0897cd8 ("drm/msm: Fix debugfs deadlock")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211013081133.GF6010@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 16:56:07 -07:00
Dan Carpenter
7425e81675 drm/msm: unlock on error in get_sched_entity()
Add a missing unlock on the error path if drm_sched_entity_init() fails.

Fixes: 68002469e5 ("drm/msm: One sched entity per process per priority")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211011124005.GE15188@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 16:52:32 -07:00
Christophe JAILLET
f8e7bce3a6 drm: Remove redundant 'flush_workqueue()' calls
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.

Remove the redundant 'flush_workqueue()' calls.

This was generated with coccinelle:

@@
expression E;
@@
- 	flush_workqueue(E);
	destroy_workqueue(E);

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jyri Sarha <jyri.sarha@iki.fi>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/75e8ba40076ad707d47e3a3670e6b23c1b8b11bc.1633874223.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 16:48:51 -07:00
Bjorn Andersson
eea8f024dd drm/msm/dp: Simplify the dp_debug debugfs show function
The "dp_debug" show function allocates a buffer and piecemeal appends
line by line, checking for buffer overflows etc.

Migrate the function to seq_file, to remove all the extra book keeping
and simplify the function.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211007190211.3158868-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 16:48:19 -07:00
Bjorn Andersson
899b2608d8 drm/msm/dp: Use the connector passed to dp_debug_get()
The debugfs code is provided an array of a single drm_connector. Then to
access the connector, the list of all connectors of the DRM device is
traversed and all non-DisplayPort connectors are skipped, to find the
one and only DisplayPort connector.

But as we move to support multiple DisplayPort controllers this will now
find multiple connectors and has no way to distinguish them.

Pass the single connector to dp_debug_get() and use this in the debugfs
functions instead, both to simplify the code and the support the
multiple instances.

Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211015232213.1839472-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 16:40:09 -07:00
Dmitry Baryshkov
1c8e5748fa drm/msm/a6xx: correct cx_debugbus_read arguments
First argument of cx_debugbus_read() should be 'void __iomem *' rather
than 'void * __iomem' to make sparse happy.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211002183118.748841-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 16:35:40 -07:00
Dmitry Baryshkov
d9fbb54d66 drm/msm/dsi: use bulk clk API
Use clk_bulk_* API instead of hand-coding them. Note, this drops support
for legacy clk naming (e.g. "iface_clk" instead of just "iface"),
however all in-kernel device trees were converted long long ago. The
warning is present there since 2017.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211002012715.691406-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 16:35:40 -07:00
Rob Clark
658f4c8296 drm/msm/devfreq: Add 1ms delay before clamping freq
Add a short delay before clamping to idle frequency on active->idle
transition.  It takes ~0.5ms to increase the freq again on the next
idle->active transition, so this helps avoid extra freq transitions
on workloads that bounce between CPU and GPU.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210927230455.1066297-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 16:35:40 -07:00
Rob Clark
ddb6e37a50 drm/msm: Add hrtimer + kthread_work helper
Before open-coding this a 2nd time, add a helper.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20210927230455.1066297-1-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 16:35:39 -07:00
Bjorn Andersson
415f36903b drm/msm/dp: Allow sub-regions to be specified in DT
Not all platforms has P0 at an offset of 0x1000 from the base address,
so add support for specifying each sub-region in DT. The code falls back
to the predefined offsets in the case that only a single reg is
specified, in order to support existing DT.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001174400.981707-6-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 16:35:39 -07:00
Guenter Roeck
e21e52ad1e csky: Make HAVE_TCM depend on !COMPILE_TEST
Building csky:allmodconfig results in the following build errors.

arch/csky/mm/tcm.c:9:2: error:
		#error "You should define ITCM_RAM_BASE"
    9 | #error "You should define ITCM_RAM_BASE"
      |  ^~~~~
arch/csky/mm/tcm.c:14:2: error:
		#error "You should define DTCM_RAM_BASE"
   14 | #error "You should define DTCM_RAM_BASE"
      |  ^~~~~
arch/csky/mm/tcm.c:18:2: error:
		#error "You should define correct DTCM_RAM_BASE"
   18 | #error "You should define correct DTCM_RAM_BASE"

This is seen with compile tests since those enable HAVE_TCM,
but do not provide useful default values for ITCM_RAM_BASE or
DTCM_RAM_BASE. Disable HAVE_TCM for commpile tests to avoid
the error.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guo Ren <guoren@kernel.org>
2021-10-16 07:20:12 +08:00
Guenter Roeck
fb5d69a5cd csky: bitops: Remove duplicate __clear_bit define
Building csky:allmodconfig results in the following build error.

In file included from ./include/linux/bitops.h:33,
                 from ./include/linux/log2.h:12,
                 from kernel/bounds.c:13:
./arch/csky/include/asm/bitops.h:77: error: "__clear_bit" redefined

Since commit 9248e52fec ("locking/atomic: simplify non-atomic wrappers"),
__clear_bit is defined in include/asm-generic/bitops/non-atomic.h,
and the define in the csky include file is no longer necessary or useful.
Remove it.

Fixes: 9248e52fec ("locking/atomic: simplify non-atomic wrappers")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guo Ren <guoren@kernel.org>
2021-10-16 07:20:12 +08:00
Guenter Roeck
aeba0b84dd csky: Select ARCH_WANT_FRAME_POINTERS only if compiler supports it
Compiling csky:allmodconfig with an upstream C compiler results
in the following error.

csky-linux-gcc: error:
	unrecognized command-line option '-mbacktrace';
	did you mean '-fbacktrace'?

Select ARCH_WANT_FRAME_POINTERS only if gcc supports it to
avoid the error.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guo Ren <guoren@kernel.org>
2021-10-16 07:20:12 +08:00
Guo Ren
af89ebaa64 csky: Fixup regs.sr broken in ptrace
gpr_get() return the entire pt_regs (include sr) to userspace, if we
don't restore the C bit in gpr_set, it may break the ALU result in
that context. So the C flag bit is part of gpr context, that's why
riscv totally remove the C bit in the ISA. That makes sr reg clear
from userspace to supervisor privilege.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
2021-10-16 07:20:12 +08:00
Al Viro
fbd63c08cd csky: don't let sigreturn play with priveleged bits of status register
csky restore_sigcontext() blindly overwrites regs->sr with the value
it finds in sigcontext.  Attacker can store whatever they want in there,
which includes things like S-bit.  Userland shouldn't be able to set
that, or anything other than C flag (bit 0).

Do the same thing other architectures with protected bits in flags
register do - preserve everything that shouldn't be settable in
user mode, picking the rest from the value saved is sigcontext.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: stable@vger.kernel.org
2021-10-16 07:20:12 +08:00
Bjorn Andersson
e3e56c050a soc: qcom: rpmhpd: Make power_on actually enable the domain
The general expectation is that powering on a power-domain should make
the power domain deliver some power, and if a specific performance state
is needed further requests has to be made.

But in contrast with other power-domain implementations (e.g. rpmpd) the
RPMh does not have an interface to enable the power, so the driver has
to vote for a particular corner (performance level) in rpmh_power_on().

But the corner is never initialized, so a typical request to simply
enable the power domain would not actually turn on the hardware. Further
more, when no more clients vote for a performance state (i.e. the
aggregated vote is 0) the power domain would be turned off.

Fix both of these issues by always voting for a corner with non-zero
value, when the power domain is enabled.

The tracking of the lowest non-zero corner is performed to handle the
corner case if there's ever a domain with a non-zero lowest corner, in
which case both rpmh_power_on() and rpmh_rpmhpd_set_performance_state()
would be allowed to use this lowest corner.

Fixes: 279b7e8a62 ("soc: qcom: rpmhpd: Add RPMh power domain driver")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211005033732.2284447-1-bjorn.andersson@linaro.org
2021-10-15 18:03:20 -05:00
Krzysztof Adamski
51369c0f05 dt-bindings: hwmon: allow specifying channels for tmp421
Add binding description for the per temperature channel configuration
like labels and n-factor.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/d1721a50efc0f88728614b5b07c0d9332ae4971c.1634206677.git.krzysztof.adamski@nokia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-15 15:57:05 -07:00
Krzysztof Adamski
3e4dd2e8bc hwmon: (tmp421) ignore non-channel related DT nodes
In case the DT contains some nodes not describing the input channels,
ignore them instead of exiting with error.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Link: https://lore.kernel.org/r/8e9e332b18dc2cf545f8e8255157e408d356f916.1634206677.git.krzysztof.adamski@nokia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-15 15:55:58 -07:00
Krzysztof Adamski
0ebbd89d4d hwmon: (tmp421) update documentation
Sysfs interface of the tmp421 driver was extended in the recent patches
so lets update the documentation to reflect that.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Link: https://lore.kernel.org/r/6ae22fdf18513ddd09f430ef9c5e46c17e27886b.1634206677.git.krzysztof.adamski@nokia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-15 15:54:26 -07:00
Krzysztof Adamski
1a98068c71 hwmon: (tmp421) support HWMON_T_ENABLE
Since the recent patches added possibility of disabling sensor channels
via DT, it only make sense to allow controlling that from userspace via
HWMON_T_ENABLE mechanism. This patches adds support for that.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Link: https://lore.kernel.org/r/a64c22e7323bd5a083f37aaaca91a745ac1beef3.1634206677.git.krzysztof.adamski@nokia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-15 15:53:19 -07:00
Krzysztof Adamski
f3fbf4b81d hwmon: (tmp421) really disable channels
Recent patch added possibility to disable selected channels. That would
only make sure that the ENODATA is returned for those channels but would
not configure the actual hardware.

With this patch, the config register is written to make sure the
channels are disabled also at hardware level.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Link: https://lore.kernel.org/r/d451cacdf21bf8eff38a47c055aad8c0c6e8755a.1634206677.git.krzysztof.adamski@nokia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-15 15:52:47 -07:00
Krzysztof Adamski
3fba10dc03 hwmon: (tmp421) support specifying n-factor via DT
Previous patches added a way to specify some channel specific parameters
in DT and n-factor is definitely one of them. This calibration mechanism
is board specific as its value depends on the diodes/transistors being
connected to the sensor and thus the DT seems like a right fit for that
information. It is very similar to the value of shunt resistor that some
drivers allows specifying in DT.

This patch adds a possibility to set n-factor for each channel via
"n-factor" DT property in each channel subnode.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Link: https://lore.kernel.org/r/69d0bfcc5ba27c67f21d3eabfb100656a14c75b9.1634206677.git.krzysztof.adamski@nokia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-15 15:49:32 -07:00
Krzysztof Adamski
45e9bda4ff hwmon: (tmp421) support disabling channels from DT
The previous patch introduced per channel subnodes in DT that let us
specify some channel specific properties. This built a ground for easily
disabling individual channels of the sensor that may not be connected to
any external diode and thus are not returning any meaningful data.

This patch adds support for parsing the "status" property of channels DT
subnodes and makes sure the -ENODATA is returned when disabled channels
value is read.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Link: https://lore.kernel.org/r/a85d623f0792b862870933a875bdf802f4c017f1.1634206677.git.krzysztof.adamski@nokia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-15 15:46:45 -07:00
Krzysztof Adamski
c1143d1bc5 hwmon: (tmp421) add support for defining labels from DT
tmp42x is a multichannel temperature sensor with several external
channels. Since those channels can be used to connect diodes placed
anywhere in the system, their meaning will vary depending on the
project. For this case, the hwmon framework has an idea of labels which
allows us to assign the meaning to each channel.

The similar concept is already implemented in ina3221 - the label for
each channel can be defined via device tree. See commit a9e9dd9c6d
("hwmon: (ina3221) Read channel input source info from DT")

This patch adds support for similar feature to tmp421.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Link: https://lore.kernel.org/r/dab0fda6ac0e8d7f163c3762a7fb1e595a4d8159.1634206677.git.krzysztof.adamski@nokia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-15 15:44:21 -07:00
Krzysztof Adamski
f04ce1e323 dt-bindings: hwmon: add missing tmp421 binding
Add basic description of the tmp421 driver DT bindings.

Signed-off-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/84ac871e30a406a1613d140a084b4f3390753099.1634206677.git.krzysztof.adamski@nokia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-10-15 15:37:41 -07:00
Nobuhiro Iwamatsu
9606ebc100 arm64: defconfig: Visconti: Enable PCIe host controller
Enable Visconti's PCIe host controller in the ARM64 defconfig.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://lore.kernel.org/r/20210907042340.1525711-1-nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
2021-10-16 07:34:01 +09:00
Stephen Suryaputra
0857d6f8c7 ipv6: When forwarding count rx stats on the orig netdev
Commit bdb7cc643f ("ipv6: Count interface receive statistics on the
ingress netdev") does not work when ip6_forward() executes on the skbs
with vrf-enslaved netdev. Use IP6CB(skb)->iif to get to the right one.

Add a selftest script to verify.

Fixes: bdb7cc643f ("ipv6: Count interface receive statistics on the ingress netdev")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211014130845.410602-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-15 15:32:04 -07:00
Yuji Ishikawa
518d432fd5 arm64: dts: visconti: Add DTS for the VisROBO board
This board consists of two boards:
the SoM board (VRC SoM) with the SoC on board, and the board for I/O (VRB).

The functions of each board supported by this update are as follows:
  - VRC SoM
    - WDT
    - GPIO
    - SDCard (SPI-MMC mode)
    - I2C x1
  - VRB board
    - VRC SoM
    - UART x2
    - Ethernet phy

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Link: https://lore.kernel.org/r/20211014092703.15251-4-yuji2.ishikawa@toshiba.co.jp
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
2021-10-16 07:09:42 +09:00
Yuji Ishikawa
d1c7bf051c dt-bindings: arm: toshiba: Add the TMPV7708 VisROBO VRB board
Add an entry for the Toshiba Visconti TMPV7708 VisROBO VRB board
(tmpv7708-visrobo-vrb) to the board/SoC bindings.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Link: https://lore.kernel.org/r/20211014092703.15251-3-yuji2.ishikawa@toshiba.co.jp
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
2021-10-16 07:09:42 +09:00
Yuji Ishikawa
c53fd4102c arm64: dts: visconti: Add 150MHz fixed clock to TMPV7708 SoC
This clock source is referred by baudrate generators of
SPI and I2C devices.

Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp>
Link: https://lore.kernel.org/r/20211014092703.15251-2-yuji2.ishikawa@toshiba.co.jp
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
2021-10-16 07:09:41 +09:00
Nobuhiro Iwamatsu
6beeaf48db arm64: dts: visconti: Add PCIe host controller support for TMPV7708 SoC
Add PCIe node and fixed clock for PCIe in TMPV7708's dtsi,
and tmpv7708-rm-mbrc boards's dts.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://lore.kernel.org/r/20210907042500.1525771-1-nobuhiro1.iwamatsu@toshiba.co.jp
2021-10-16 07:09:41 +09:00
Maxime Ripard
c509d8b900 dt-bindings: media: Convert OV5640 binding to a schema
The Omnivision OV5640 is supported by Linux thanks to its device tree
binding.

Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.

Cc: linux-media@vger.kernel.org
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211015072830.8580-1-maxime@cerno.tech
Signed-off-by: Rob Herring <robh@kernel.org>
2021-10-15 17:07:47 -05:00
Stephen Boyd
bada0389c2 clk: renesas: Updates for v5.16 (take two)
- Add SPI Multi I/O Bus and SDHI clocks and resets on RZ/G2L,
   - Add SPI Multi I/O Bus (RPC) clocks on R-Car V3U,
   - Add MediaLB clocks on R-Car H3, M3-W/W+, and M3-N.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYWln3QAKCRCKwlD9ZEnx
 cBVCAP9WgdRq0SWdQqGRwUAo9RTmPxy4YmlU9EWifI6qrVc8xgD/cZ2Luew7N6JF
 n3jFh9gn8kKfV+gFRTgSGNVgGdOi8Ak=
 =7pBq
 -----END PGP SIGNATURE-----

Merge tag 'renesas-clk-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas

Pull Renesas clk driver updates from Geert Uytterhoeven:

 - Add SPI Multi I/O Bus and SDHI clocks and resets on RZ/G2L
 - Add SPI Multi I/O Bus (RPC) clocks on R-Car V3U
 - Add MediaLB clocks on R-Car H3, M3-W/W+, and M3-N

* tag 'renesas-clk-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: r8a779[56]x: Add MLP clocks
  clk: renesas: r9a07g044: Add SDHI clock and reset entries
  clk: renesas: rzg2l: Add SDHI clk mux support
  clk: renesas: r8a779a0: Add RPC support
  clk: renesas: cpg-lib: Move RPC clock registration to the library
  clk: renesas: r9a07g044: Add clock and reset entries for SPI Multi I/O Bus Controller
2021-10-15 14:57:57 -07:00
AngeloGioacchino Del Regno
c9a9dc49dc dt-bindings: display/bridge: sil, sii9234: Convert to YAML binding
Convert the Silicon Image SiI9234 HDMI/MHL bridge documentation to YAML.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006152158.601856-1-angelogioacchino.delregno@collabora.com
2021-10-15 22:52:39 +02:00
Qing Wang
cc83ff247b video: omapfb: replace snprintf in show functions with sysfs_emit
coccicheck complains about the use of snprintf() in sysfs show functions.

Fix the coccicheck warning:
WARNING: use scnprintf or sprintf.

Use sysfs_emit instead of scnprintf or sprintf makes more sense.

Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634095693-4428-1-git-send-email-wangqing@vivo.com
2021-10-15 22:52:10 +02:00
Qing Wang
4701a0dd41 video: fbdev: replace snprintf in show functions with sysfs_emit
coccicheck complains about the use of snprintf() in sysfs show functions.

Fix the coccicheck warning:
WARNING: use scnprintf or sprintf.

Use sysfs_emit instead of scnprintf or sprintf makes more sense.

Signed-off-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1634095680-4377-1-git-send-email-wangqing@vivo.com
2021-10-15 22:46:16 +02:00
Bjorn Andersson
060c160fbb drm/msm/dp: Store each subblock in the io region
Not all platforms has DP_P0 at offset 0x1000 from the beginning of the
DP block. So split the dss_io_data memory region into a set of
sub-regions, to make it possible in the next patch to specify each of
the sub-regions individually.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001174400.981707-5-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 13:26:34 -07:00
Bjorn Andersson
ef501dbf84 drm/msm/dp: Refactor ioremap wrapper
In order to deal with multiple memory ranges in the following commit
change the ioremap wrapper to not poke directly into the dss_io_data
struct.

While at it, devm_ioremap_resource() already prints useful error
messages on failure, so omit the unnecessary prints from the caller.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211001174400.981707-4-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 13:26:34 -07:00
Bjorn Andersson
17b019e3b0 drm/msm/dp: Use devres for ioremap()
The non-devres version of ioremap is used, which requires manual
cleanup. But the code paths leading here is mixed with other devres
users, so rely on this for ioremap as well to simplify the code.

Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001174400.981707-3-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 13:26:34 -07:00
Bjorn Andersson
687825c402 dt-bindings: msm/dp: Change reg definition
reg was defined as one region covering the entire DP block, but the
memory map is actually split in 4 regions and obviously the size of
these regions differs between platforms.

Switch the reg to require that all four regions are specified instead.
It is expected that the implementation will handle existing DTBs, even
though the schema defines the new layout.

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211001174400.981707-2-bjorn.andersson@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 13:26:34 -07:00
Dan Carpenter
b6816441a1 drm/msm: potential error pointer dereference in init()
The msm_iommu_new() returns error pointers on failure so check for that
to avoid an Oops.

Fixes: ccac7ce373 ("drm/msm: Refactor address space initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211004103806.GD25015@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 13:26:34 -07:00
Dan Carpenter
3d91e50ff5 drm/msm: Fix potential Oops in a6xx_gmu_rpmh_init()
There are two problems here:
1) The "seqptr" is used uninitalized when we free it at the end.
2) The a6xx_gmu_get_mmio() function returns error pointers.  It never
   returns true.

Fixes: 64245fc551 ("drm/msm/a6xx: use AOP-initialized PDC for a650")
Fixes: f8fc924e08 ("drm/msm/a6xx: Fix PDC register overlap")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211004134530.GB11689@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 13:26:34 -07:00
Dmitry Baryshkov
bf94ec093d drm/msm/dsi: do not enable irq handler before powering up the host
The DSI host might be left in some state by the bootloader. If this
state generates an IRQ, it might hang the system by holding the
interrupt line before the driver sets up the DSI host to the known
state.

Move the request_irq into msm_dsi_host_init and pass IRQF_NO_AUTOEN to
it. Call enable/disable_irq after msm_dsi_host_power_on/_off()
functions, so that we can be sure that the interrupt is delivered when
the host is in the known state.

It is not possible to defer the interrupt enablement to a later point,
because drm_panel_prepare might need to communicate with the panel over
the DSI link and that requires working interrupt.

Fixes: a689554ba6 ("drm/msm: Initial add DSI connector support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Link: https://lore.kernel.org/r/20211002010830.647416-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 13:26:34 -07:00
Vladimir Lypak
fb25d4474f drm/msm/mdp5: Add configuration for MDP v1.16
MDP version v1.16 is almost identical to v1.15 with most significant
difference being presence of second DSI interface. MDP v1.16 is found on
SoCs such as MSM8x53, SDM450, SDM632 (All with Adreno 506).

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210928131929.18567-4-sireeshkodali1@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 13:26:34 -07:00
Vladimir Lypak
90a06f134c drm/msm/dsi: Add phy configuration for MSM8953
Add phy configuration for 14nm dsi phy found on MSM8953 SoC. Only
difference from existing configurations are io_start addresses.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
Link: https://lore.kernel.org/r/20210928131929.18567-3-sireeshkodali1@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2021-10-15 13:26:34 -07:00