After commit ea2f0f7753 ("scsi: core: Cap scsi_host cmd_per_lun at
can_queue"), a 416-CPU VM running on Hyper-V hangs during boot because the
hv_storvsc driver sets scsi_driver.can_queue to an integer value that
exceeds SHRT_MAX, and hence scsi_add_host_with_dma() sets
shost->cmd_per_lun to a negative "short" value.
Use min_t(int, ...) to work around the issue.
Link: https://lore.kernel.org/r/20211008043546.6006-1-decui@microsoft.com
Fixes: ea2f0f7753 ("scsi: core: Cap scsi_host cmd_per_lun at can_queue")
Cc: stable@vger.kernel.org
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Due to historical reason, some legacy shipped system doesn't follow
OpRegion 2.1 spec but still stick to OpRegion 2.0, in which the extended
VBT is not contiguous after OpRegion in physical address, but any
location pointed by RVDA via absolute address. Also although current
OpRegion 2.1+ systems appears that the extended VBT follows OpRegion,
RVDA is the relative address to OpRegion head, the extended VBT location
may change to non-contiguous to OpRegion. In both cases, it's impossible
to map a contiguous range to hold both OpRegion and the extended VBT and
expose via one vfio region.
The only difference between OpRegion 2.0 and 2.1 is where extended
VBT is stored: For 2.0, RVDA is the absolute address of extended VBT
while for 2.1, RVDA is the relative address of extended VBT to OpRegion
baes, and there is no other difference between OpRegion 2.0 and 2.1.
To support the non-contiguous region case as described, the updated read
op will patch OpRegion version and RVDA on-the-fly accordingly. So that
from vfio igd OpRegion view, only 2.1+ with contiguous extended VBT
after OpRegion is exposed, regardless the underneath host OpRegion is
2.0 or 2.1+. The mechanism makes it possible to support legacy OpRegion
2.0 extended VBT systems with on the market, and support OpRegion 2.1+
where the extended VBT isn't contiguous after OpRegion.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Hang Yuan <hang.yuan@linux.intel.com>
Cc: Swee Yee Fonn <swee.yee.fonn@intel.com>
Cc: Fred Gao <fred.gao@intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Link: https://lore.kernel.org/r/20211012124855.52463-1-colin.xu@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Add code to rxe_get_av in rxe_av.c to use the AH index in UD send WQEs to
lookup the kernel AH. For old user providers continue to use the AV passed
in WQEs. Move setting pkt->rxe to before the call to rxe_get_av() to get
access to the AH pool.
Link: https://lore.kernel.org/r/20211007204051.10086-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The pd field in struct rxe_ah is redundant with the pd field in the
rdma-core's ib_ah. Eliminate the pd field in rxe_ah and add an inline to
extract the pd from the ibah field.
Link: https://lore.kernel.org/r/20211007204051.10086-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make changes to rdma_user_rxe.h to allow indexing AH objects, passing the
index in UD send WRs to the driver and returning the index to the rxe
provider.
Modify rxe_create_ah() to add an index to AH when created and if called
from a new user provider return it to user space. If called from an old
provider mark the AH as not having a useful index. Modify rxe_destroy_ah
to drop the index before deleting the object.
Link: https://lore.kernel.org/r/20211007204051.10086-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Make changes to rxe_param.h and rxe_pool.c to allow indexing of AH
objects. Valid indices are non-zero so older providers can be detected.
Link: https://lore.kernel.org/r/20211007204051.10086-3-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move the struct rxe_av av from struct rxe_send_wqe to struct rxe_send_wr
placing it in wr.ud at the same offset as it was previously. This has the
effect of increasing the size of struct rxe_send_wr while keeping the size
of struct rxe_send_wqe the same. This better reflects the use of this
field which is only used for UD sends. This change has no effect on ABI
compatibility so the modified rxe driver will operate with older versions
of rdma-core.
Link: https://lore.kernel.org/r/20211007204051.10086-2-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The error flow fixed in this patch is not possible because all kernel
users of create QP interface check that device supports steering before
set IB_QP_CREATE_NETIF_QP flag.
Fixes: c1c9850112 ("IB/mlx4: Add support for steerable IB UD QPs")
Link: https://lore.kernel.org/r/91c61f6e60eb0240f8bbc321fda7a1d2986dd03c.1634023677.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The function irdma_cqp_up_map_cmd() is not used. So remove it.
Link: https://lore.kernel.org/r/20211011110128.4057-5-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The function irdma_get_hw_addr() is not used. So remove it.
Link: https://lore.kernel.org/r/20211011110128.4057-4-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The function irdma_sc_send_lsmm_nostag is not used. So remove it.
Link: https://lore.kernel.org/r/20211011110128.4057-3-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The function irdma_uk_mw_bind is not used. So remove it.
Link: https://lore.kernel.org/r/20211011110128.4057-2-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
'destroy_workqueue()' already drains the queue before destroying it, so
there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
This was generated with coccinelle:
@@
expression E;
@@
- flush_workqueue(E);
destroy_workqueue(E);
Link: https://lore.kernel.org/r/ca7bac6e6c9c5cc8d04eec3944edb13de0e381a3.1633874776.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A series of devicetree fixes for the Raspberry Pi 4:
- Fix VEC reg address
- Fix MDIO address/size cells
- Fix regulator states
- Fix PCIe address formatting
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
dtbs_check currently complains that:
arch/arm/boot/dts/bcm2711-rpi-4-b.dts:220.10-231.4: Warning
(pci_device_reg): /scb/pcie@7d500000/pci@1,0: PCI unit address format
error, expected "0,0"
Unsurprisingly pci@0,0 is the right address, as illustrated by its reg
property:
&pcie0 {
pci@0,0 {
/*
* As defined in the IEEE Std 1275-1994 document,
* reg is a five-cell address encoded as (phys.hi
* phys.mid phys.lo size.hi size.lo). phys.hi
* should contain the device's BDF as 0b00000000
* bbbbbbbb dddddfff 00000000. The other cells
* should be zero.
*/
reg = <0 0 0 0 0>;
};
};
The device is clearly 0. So fix it.
Also add a missing 'device_type = "pci"'.
Fixes: 258f92d2f8 ("ARM: dts: bcm2711: Add reset controller to xHCI node")
Suggested-by: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210831125843.1233488-1-nsaenzju@redhat.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Both iov_iter_get_pages and iov_iter_get_pages_alloc return the number
of bytes of the iovec they could get the pages for. When they cannot
get any pages, they're supposed to return 0, but when the start of the
iovec isn't page aligned, the calculation goes wrong and they return a
negative value. Fix both functions.
In addition, change iov_iter_get_pages_alloc to return NULL in that case
to prevent resource leaks.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The pointer err_str is being initialized with a value that is never read,
it is being updated later on. The assignment is redundant and can be
removed.
Link: https://lore.kernel.org/r/20211007173942.21933-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This variable is just a temporary variable, used to do an endian
conversion. The problem is that the last byte is not initialized. After
the conversion is completely done, the last byte is discarded so it doesn't
cause a problem. But static checkers and the KMSan runtime checker can
detect the uninitialized read and will complain about it.
Link: https://lore.kernel.org/r/20211006073242.GA8404@kili
Fixes: 5036f0a0ec ("[SCSI] csiostor: Fix sparse warnings.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The snd_hdac_bus_reset_link() contains logic to clear STATESTS register
before performing controller reset. This code dates back to an old
bugfix in commit e8a7f136f5 ("[ALSA] hda-intel - Improve HD-audio
codec probing robustness"). Originally the code was added to
azx_reset().
The code was moved around in commit a41d122449 ("ALSA: hda - Embed bus
into controller object") and ended up to snd_hdac_bus_reset_link() and
called primarily via snd_hdac_bus_init_chip().
The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is
called when controller is not in reset. In this case, STATESTS can be
cleared. This can be useful e.g. when forcing a controller reset to retry
codec probe. A normal non-power-on reset will not clear the bits.
However, this old logic is problematic when controller is already in
reset. The HDA specification states that controller must be taken out of
reset before writing to registers other than GCTL.CRST (1.0a spec,
3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost
if the controller is already in reset per the HDA specification mentioned.
This has been harmless on older hardware. On newer generation of Intel
PCIe based HDA controllers, if configured to report issues, this write
will emit an unsupported request error. If ACPI Platform Error Interface
(APEI) is enabled in kernel, this will end up to kernel log.
Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if
the function is called when controller is not in reset. Otherwise
clearing the bits is not possible and should be skipped.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Need to resync drm-intel-next with TTM and PXP stuff from
drm-intel-gt-next that is now in drm/drm-next.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
max17042_set_soc_threshold gets called with offset set to 1, which means
that minimum threshold value would underflow once SOC got down to 0,
causing invalid alerts from the gauge.
Fixes: e5f3872d20 ("max17042: Add support for signalling change in SOC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The gauge requires us to clear the status bits manually for some alerts
to be properly dismissed. Previously the IRQ was configured to react only
on falling edge, which wasn't technically correct (the ALRT line is active
low), but it had a happy side-effect of preventing interrupt storms
on uncleared alerts from happening.
Fixes: 7fbf6b731b ("power: supply: max17042: Do not enforce (incorrect) interrupt trigger type")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Merge the 5.15/scsi-fixes branch into the staging tree to resolve UFS
conflict reported by sfr.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Replacing kmalloc/kfree/dma_map_single/dma_unmap_single() with
dma_alloc_coherent/dma_free_coherent() helps to reduce code size, and
simplify the code, and coherent DMA will not clear the cache every time.
The SOC that this driver supports does not have incoherent DMA, so this
makes the code follow the DMA API properly with no performance
impact. Currently there are missing dma sync calls around the DMA
transfers.
Link: https://lore.kernel.org/r/20210926061116.282-1-caihuoqing@baidu.com
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Reviewed-by: Wenpeng Liang <liangwenpeng@huawei.com>
Tested-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
We are currently using tsc_khz as a fallback so add the right include.
For other architectures we may need to add a different fallback, but
this is not being used by dgfx so we may as well just paper it over.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211007233212.3896460-2-lucas.demarchi@intel.com
When get_hw_stats is called, query and return the optional counter
statistic as well.
Link: https://lore.kernel.org/r/20211008122439.166063-14-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support for ib callback modify_op_stat() to add or remove an optional
counter. When adding, a steering flow table is created with a rule that
catches and counts all the matching packets. When removing, the table and
flow counter are destroyed.
Link: https://lore.kernel.org/r/20211008122439.166063-13-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Adding steering infrastructure for adding and removing optional counter.
This allows to add and remove the counters dynamically in order not to
hurt performance.
Link: https://lore.kernel.org/r/20211008122439.166063-12-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add optional counter support when allocate and initialize hw_stats
structure. Optional counters have IB_STAT_FLAG_OPTIONAL flag set and are
disabled by default.
Link: https://lore.kernel.org/r/20211008122439.166063-11-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Provide an option to allow users to enable/disable optional counters
through RDMA netlink. Limiting it to users with ADMIN capability only.
Examples:
1. Enable optional counters cc_rx_ce_pkts and cc_rx_cnp_pkts (and
disable all others):
$ sudo rdma statistic set link rocep8s0f0/1 optional-counters \
cc_rx_ce_pkts,cc_rx_cnp_pkts
2. Remove all optional counters:
$ sudo rdma statistic unset link rocep8s0f0/1 optional-counters
Link: https://lore.kernel.org/r/20211008122439.166063-10-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to allow expansion of the set command with more set options, take
the set mode out of the main set function.
Link: https://lore.kernel.org/r/20211008122439.166063-9-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch adds the ability to get the name, index and status of all
counters for each link through RDMA netlink. This can be used for
user-space to get the current optional-counter mode.
Examples:
$ rdma statistic mode
link rocep8s0f0/1 optional-counters cc_rx_ce_pkts
$ rdma statistic mode supported
link rocep8s0f0/1 supported optional-counters cc_rx_ce_pkts,cc_rx_cnp_pkts,cc_tx_cnp_pkts
link rocep8s0f1/1 supported optional-counters cc_rx_ce_pkts,cc_rx_cnp_pkts,cc_tx_cnp_pkts
Link: https://lore.kernel.org/r/20211008122439.166063-8-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
An optional counter is a driver-specific counter that may be dynamically
enabled/disabled. This enhancement allows drivers to expose counters
which are, for example, mutually exclusive and cannot be enabled at the
same time, counters that might degrades performance, optional debug
counters, etc.
Optional counters are marked with IB_STAT_FLAG_OPTIONAL flag. They are not
exported in sysfs, and must be at the end of all stats, otherwise the
attr->show() in sysfs would get wrong indexes for hwcounters that are
behind optional counters.
Link: https://lore.kernel.org/r/20211008122439.166063-7-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a bitmap in rdma_hw_stat structure, with each bit indicates whether
the corresponding counter is currently disabled or not. By default
hwcounters are enabled.
Link: https://lore.kernel.org/r/20211008122439.166063-6-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a new API rdma_free_hw_stats_struct to pair with
rdma_alloc_hw_stats_struct (which is also de-inlined).
This will be useful when there are more alloc/free works in following
patches.
Link: https://lore.kernel.org/r/20211008122439.166063-5-markzhang@nvidia.com
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a counter statistic descriptor structure in rdma_hw_stats. In addition
to the counter name, more meta-information will be added. This code
extension is needed for optional-counter support in the following patches.
Link: https://lore.kernel.org/r/20211008122439.166063-4-markzhang@nvidia.com
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The Maxim max17040 fuel gauge driver supports several devices used on
multiple different boards. The driver is incomplete and has few known
issues. Fixing these might break other platforms so mention recent
contributors who can provide feedback. This way most of interested
parties might help reviewing the patches.
Cc: Iskren Chernev <iskren.chernev@gmail.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Matheus Castello <matheus@castello.eng.br>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The Maxim max17042 fuel gauge driver supports several devices used on
multiple different boards - both devicetree and ACPI based. The driver
is incomplete and has few known issues. Fixing these might break other
platforms so mention recent contributors who can provide feedback. This
way most of interested parties might help reviewing the patches.
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In order to group sockets being connected using L2CAP_MODE_EXT_FLOWCTL
the pid is used but sk_peer_pid was not being initialized as it is
currently only done for af_unix.
Fixes: b48596d1dc ("Bluetooth: L2CAP: Add get_peer_pid callback")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The receive path may take the socket right before hci_sock_release(),
but it may enqueue the packets to the socket queues after the call to
skb_queue_purge(), therefore the socket can be destroyed without clear
its queues completely.
Moving these skb_queue_purge() to the hci_sock_destruct() will fix this
issue, because nothing is referencing the socket at this point.
Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com>
Reported-by: syzbot+4c4ffd1e1094dae61035@syzkaller.appspotmail.com
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
For dependencies in the following patches.
* mellanox/mlx5-next:
net/mlx5: Add priorities for counters in RDMA namespaces
net/mlx5: Add ifc bits to support optional counters
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
As there are two drivers for DSP on i.MX, one is for sound open
firmware, another is for remote processor framework. In order to
distinguish two kinds of driver, defining different compatible strings.
For remote proc driver, the properties firmware-name and fsl,dsp-ctrl
are needed and the mailbox channel is different with SOF.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1633944015-789-5-git-send-email-shengjiu.wang@nxp.com
[Fixed capital letter at the beginning of the subject line]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>