Commit graph

1,169,205 commits

Author SHA1 Message Date
Paolo Bonzini
6ccf443882 KVM: MMU: unify tdp_mmu_map_set_spte_atomic and tdp_mmu_set_spte_atomic_no_dirty_log
tdp_mmu_map_set_spte_atomic is not taking care of dirty logging anymore,
the only difference that remains is that it takes a vCPU instead of
the struct kvm.  Merge the two functions.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:53 -04:00
Paolo Bonzini
bcc4f2bc50 KVM: MMU: mark page dirty in make_spte
This simplifies set_spte, which we want to remove, and unifies code
between the shadow MMU and the TDP MMU.  The warning will be added
back later to make_spte as well.

There is a small disadvantage in the TDP MMU; it may unnecessarily mark
a page as dirty twice if two vCPUs end up mapping the same page twice.
However, this is a very small cost for a case that is already rare.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:53 -04:00
David Matlack
68be1306ca KVM: x86/mmu: Fold rmap_recycle into rmap_add
Consolidate rmap_recycle and rmap_add into a single function since they
are only ever called together (and only from one place). This has a nice
side effect of eliminating an extra kvm_vcpu_gfn_to_memslot(). In
addition it makes mmu_set_spte(), which is a very long function, a
little shorter.

No functional change intended.

Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210813203504.2742757-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:52 -04:00
Sean Christopherson
b1a429fb18 KVM: x86/mmu: Verify shadow walk doesn't terminate early in page faults
WARN and bail if the shadow walk for faulting in a SPTE terminates early,
i.e. doesn't reach the expected level because the walk encountered a
terminal SPTE.  The shadow walks for page faults are subtle in that they
install non-leaf SPTEs (zapping leaf SPTEs if necessary!) in the loop
body, and consume the newly created non-leaf SPTE in the loop control,
e.g. __shadow_walk_next().  In other words, the walks guarantee that the
walk will stop if and only if the target level is reached by installing
non-leaf SPTEs to guarantee the walk remains valid.

Opportunistically use fault->goal-level instead of it.level in
FNAME(fetch) to further clarify that KVM always installs the leaf SPTE at
the target level.

Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20210906122547.263316-1-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:52 -04:00
Paolo Bonzini
f0066d94c9 KVM: MMU: change tracepoints arguments to kvm_page_fault
Pass struct kvm_page_fault to tracepoints instead of extracting the
arguments from the struct.  This also lets the kvm_mmu_spte_requested
tracepoint pick the gfn directly from fault->gfn, instead of using
the address.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:52 -04:00
Paolo Bonzini
536f0e6ace KVM: MMU: change disallowed_hugepage_adjust() arguments to kvm_page_fault
Pass struct kvm_page_fault to disallowed_hugepage_adjust() instead of
extracting the arguments from the struct.  Tweak a bit the conditions
to avoid long lines.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:51 -04:00
Paolo Bonzini
73a3c65947 KVM: MMU: change kvm_mmu_hugepage_adjust() arguments to kvm_page_fault
Pass struct kvm_page_fault to kvm_mmu_hugepage_adjust() instead of
extracting the arguments from the struct; the results are also stored
in the struct, so the callers are adjusted consequently.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:51 -04:00
Paolo Bonzini
3c8ad5a675 KVM: MMU: change fast_page_fault() arguments to kvm_page_fault
Pass struct kvm_page_fault to fast_page_fault() instead of
extracting the arguments from the struct.

Suggested-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:51 -04:00
Paolo Bonzini
cdc47767a0 KVM: MMU: change tdp_mmu_map_handle_target_level() arguments to kvm_page_fault
Pass struct kvm_page_fault to tdp_mmu_map_handle_target_level() instead of
extracting the arguments from the struct.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:50 -04:00
Paolo Bonzini
2f6305dd56 KVM: MMU: change kvm_tdp_mmu_map() arguments to kvm_page_fault
Pass struct kvm_page_fault to kvm_tdp_mmu_map() instead of
extracting the arguments from the struct.

Suggested-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:50 -04:00
Paolo Bonzini
9c03b1821a KVM: MMU: change FNAME(fetch)() arguments to kvm_page_fault
Pass struct kvm_page_fault to FNAME(fetch)() instead of
extracting the arguments from the struct.

Suggested-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:50 -04:00
Paolo Bonzini
43b74355ef KVM: MMU: change __direct_map() arguments to kvm_page_fault
Pass struct kvm_page_fault to __direct_map() instead of
extracting the arguments from the struct.

Suggested-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:50 -04:00
Paolo Bonzini
3a13f4fea3 KVM: MMU: change handle_abnormal_pfn() arguments to kvm_page_fault
Pass struct kvm_page_fault to handle_abnormal_pfn() instead of
extracting the arguments from the struct.

Suggested-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:49 -04:00
Paolo Bonzini
3647cd04b7 KVM: MMU: change kvm_faultin_pfn() arguments to kvm_page_fault
Add fields to struct kvm_page_fault corresponding to outputs of
kvm_faultin_pfn().  For now they have to be extracted again from struct
kvm_page_fault in the subsequent steps, but this is temporary until
other functions in the chain are switched over as well.

Suggested-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:49 -04:00
Paolo Bonzini
b8a5d55115 KVM: MMU: change page_fault_handle_page_track() arguments to kvm_page_fault
Add fields to struct kvm_page_fault corresponding to the arguments
of page_fault_handle_page_track().  The fields are initialized in the
callers, and page_fault_handle_page_track() receives a struct
kvm_page_fault instead of having to extract the arguments out of it.

Suggested-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:49 -04:00
Paolo Bonzini
4326e57ef4 KVM: MMU: change direct_page_fault() arguments to kvm_page_fault
Add fields to struct kvm_page_fault corresponding to
the arguments of direct_page_fault().  The fields are
initialized in the callers, and direct_page_fault()
receives a struct kvm_page_fault instead of having to
extract the arguments out of it.

Also adjust FNAME(page_fault) to store the max_level in
struct kvm_page_fault, to keep it similar to the direct
map path.

Suggested-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:49 -04:00
Paolo Bonzini
c501040abc KVM: MMU: change mmu->page_fault() arguments to kvm_page_fault
Pass struct kvm_page_fault to mmu->page_fault() instead of
extracting the arguments from the struct.  FNAME(page_fault) can use
the precomputed bools from the error code.

Suggested-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:48 -04:00
Paolo Bonzini
6defd9bb17 KVM: MMU: Introduce struct kvm_page_fault
Create a single structure for arguments that are passed from
kvm_mmu_do_page_fault to the page fault handlers.  Later
the structure will grow to include various output parameters
that are passed back to the next steps in the page fault
handling.

Suggested-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:48 -04:00
Paolo Bonzini
d055f028a5 KVM: MMU: pass unadulterated gpa to direct_page_fault
Do not bother removing the low bits of the gpa.  This masking dates back
to the very first commit of KVM but it is unnecessary, as exemplified
by the other call in kvm_tdp_page_fault.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:48 -04:00
Oliver Upton
55c0cefbdb KVM: x86: Fix potential race in KVM_GET_CLOCK
Sean noticed that KVM_GET_CLOCK was checking kvm_arch.use_master_clock
outside of the pvclock sync lock. This is problematic, as the clock
value written to the user may or may not actually correspond to a stable
TSC.

Fix the race by populating the entire kvm_clock_data structure behind
the pvclock_gtod_sync_lock.

Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20210916181538.968978-4-oupton@google.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:47 -04:00
Paolo Bonzini
45e6c2fac0 KVM: x86: extract KVM_GET_CLOCK/KVM_SET_CLOCK to separate functions
No functional change intended.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:47 -04:00
Paolo Bonzini
6b6fcd2804 kvm: x86: abstract locking around pvclock_update_vm_gtod_copy
Updates to the kvmclock parameters needs to do a complicated dance of
KVM_REQ_MCLOCK_INPROGRESS and KVM_REQ_CLOCK_UPDATE in addition to taking
pvclock_gtod_sync_lock.  Place that in two functions that can be called
on all of master clock update, KVM_SET_CLOCK, and Hyper-V reenlightenment.

Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:47 -04:00
Lai Jiangshan
3e44dce4d0 KVM: X86: Move PTE present check from loop body to __shadow_walk_next()
So far, the loop bodies already ensure the PTE is present before calling
__shadow_walk_next():  Some loop bodies simply exit with a !PRESENT
directly and some other loop bodies, i.e. FNAME(fetch) and __direct_map()
do not currently guard their walks with is_shadow_present_pte, but only
because they install present non-leaf SPTEs in the loop itself.

But checking pte present in __shadow_walk_next() (which is called from
shadow_walk_okay()) is more prudent; walking past a !PRESENT SPTE
would lead to attempting to read a the next level SPTE from a garbage
iter->shadow_addr.  It also allows to remove the is_shadow_present_pte()
checks from the loop bodies.

Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20210906122547.263316-2-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:46 -04:00
Maxim Levitsky
5228eb96a4 KVM: x86: nSVM: implement nested TSC scaling
This was tested by booting a nested guest with TSC=1Ghz,
observing the clocks, and doing about 100 cycles of migration.

Note that qemu patch is needed to support migration because
of a new MSR that needs to be placed in the migration state.

The patch will be sent to the qemu mailing list soon.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-14-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:46 -04:00
Maxim Levitsky
f800650a4e KVM: x86: SVM: add module param to control TSC scaling
This allows to easily simulate a CPU without this feature.

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210914154825.104886-13-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:44:46 -04:00
Arnd Bergmann
606b102876 drm: fb_helper: fix CONFIG_FB dependency
With CONFIG_FB=m and CONFIG_DRM=y, we get a link error in the fb helper:

aarch64-linux-ld: drivers/gpu/drm/drm_fb_helper.o: in function `drm_fb_helper_alloc_fbi':
(.text+0x10cc): undefined reference to `framebuffer_alloc'

Tighten the dependency so it is only allowed in the case that DRM can
link against FB.

Fixes: f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
Link: https://lore.kernel.org/all/20210721152211.2706171-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927142816.2069269-1-arnd@kernel.org
2021-10-01 09:40:16 +02:00
Paolo Bonzini
36e8194dcd KVM: x86: SVM: don't set VMLOAD/VMSAVE intercepts on vCPU reset
Commit adc2a23734 ("KVM: nSVM: improve SYSENTER emulation on AMD"),
made init_vmcb set vmload/vmsave intercepts unconditionally,
and relied on svm_vcpu_after_set_cpuid to clear them when possible.

However init_vmcb is also called when the vCPU is reset, and it is
not followed by another call to svm_vcpu_after_set_cpuid because
the CPUID is already set.  This mistake makes the VMSAVE/VMLOAD intercept
to be set when it is not needed, and harms performance of the nested
guest.

Extract the relevant parts of svm_vcpu_after_set_cpuid so that they
can be called again on reset.

Fixes: adc2a23734 ("KVM: nSVM: improve SYSENTER emulation on AMD")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-10-01 03:37:34 -04:00
Christian König
6b51b02a3a dma-buf: fix and rework dma_buf_poll v7
Daniel pointed me towards this function and there are multiple obvious problems
in the implementation.

First of all the retry loop is not working as intended. In general the retry
makes only sense if you grab the reference first and then check the sequence
values.

Then we should always also wait for the exclusive fence.

It's also good practice to keep the reference around when installing callbacks
to fences you don't own.

And last the whole implementation was unnecessary complex and rather hard to
understand which could lead to probably unexpected behavior of the IOCTL.

Fix all this by reworking the implementation from scratch. Dropping the
whole RCU approach and taking the lock instead.

Only mildly tested and needs a thoughtful review of the code.

Pushing through drm-misc-next to avoid merge conflicts and give the code
another round of testing.

v2: fix the reference counting as well
v3: keep the excl fence handling as is for stable
v4: back to testing all fences, drop RCU
v5: handle in and out separately
v6: add missing clear of events
v7: change coding style as suggested by Michel, drop unused variables

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Michel Dänzer <mdaenzer@redhat.com>
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210720131110.88512-1-christian.koenig@amd.com
2021-10-01 09:30:02 +02:00
Stefan Riedmueller
d1012253a2 clk: imx: imx6ul: Fix csi clk gate register
According to the imx6ul Reference Manual the csi clk gate register is
CCM_CCGR3 (offset 0x74) bit 0/1. For the imx6ull on the other hand the
Reference Manual lists register CCM_CCGR2 (offset 0x70) bit 2/3 as the
csi clk gate which is the current setting.

Tests have shown though that the correct csi clk gate register for the
imx6ull is actually CCM_CCGR3 bit 0/1 as well. Thus set the correct
register for both platforms.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Tested-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210927072857.3940880-2-s.riedmueller@phytec.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-10-01 10:15:51 +03:00
Stefan Riedmueller
2f9d618696 clk: imx: imx6ul: Move csi_sel mux to correct base register
The csi_sel mux register is located in the CCM register base and not the
CCM_ANALOG register base. So move it to the correct position in code.

Otherwise changing the parent of the csi clock can lead to a complete
system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely
modified.

Also remove the SET_RATE_PARENT flag since one possible supply for the
csi_sel mux is the system PLL which we don't want to modify.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210927072857.3940880-1-s.riedmueller@phytec.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-10-01 10:15:51 +03:00
Jacky Bai
d4e6c054fa clk: imx: Fix the build break when clk-imx8ulp build as module
Export the necessary symbols to fix the build break when clk-imx8ulp
build as module

Fixes: c43a801a57 ("clk: imx: Add clock driver for imx8ulp")
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210917061629.3798360-1-ping.bai@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
2021-10-01 10:15:42 +03:00
Chris Chiu
2b987fe844 ALSA: hda - Enable headphone mic on Dell Latitude laptops with ALC3254
The headphone mic is not working on Dell Latitude laptops with ALC3254.
The codec vendor id is 0x10ec0295 and share the same pincfg as defined
in ALC295_STANDARD_PINS. So the ALC269_FIXUP_DELL1_MIC_NO_PRESENCE will
be applied per alc269_pin_fixup_tbl[] but actually the headphone mic is
using NID 0x1b instead of 0x1a. The ALC269_FIXUP_DELL4_MIC_NO_PRESENCE
need to be applied instead.

Use ALC269_FIXUP_DELL4_MIC_NO_PRESENCE for particular models before
a generic fixup comes out.

Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211001062856.1037901-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-01 09:00:18 +02:00
Geraldo Nascimento
28c369e608 ALSA: usb-audio: disable implicit feedback sync for Behringer UFX1204 and UFX1604
Behringer UFX1204 and UFX1604 have Synchronous endpoints to which
current ALSA code applies implicit feedback sync as if they were
Asynchronous endpoints. This breaks UAC compliance and is unneeded.

The commit 5e35dc0338 and subsequent
1a15718b41 were meant to clear up noise.

Unfortunately, noise persisted for those using higher sample rates and
this was only solved by commit d2e8f64125

Since there are no more reports of noise, let's get rid of the
implicit-fb quirks breaking UAC compliance.

Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/YVYSnoQ7nxLXT0Dq@geday
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-10-01 08:57:34 +02:00
Herbert Xu
e42dff467e crypto: api - Export crypto_boot_test_finished
We need to export crypto_boot_test_finished in case api.c is
built-in while algapi.c is built as a module.

Fixes: adad556efc ("crypto: api - Fix built-in testing dependency failures")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # ppc32 build
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-10-01 14:41:23 +08:00
Colin Ian King
6e96dbe7c4 crypto: hisilicon/zip - Fix spelling mistake "COMSUMED" -> "CONSUMED"
There is a spelling mistake in a literal string. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-10-01 14:41:23 +08:00
Arnd Bergmann
38aa192a05 crypto: ecc - fix CRYPTO_DEFAULT_RNG dependency
The ecc.c file started out as part of the ECDH algorithm but got
moved out into a standalone module later. It does not build without
CRYPTO_DEFAULT_RNG, so now that other modules are using it as well we
can run into this link error:

aarch64-linux-ld: ecc.c:(.text+0xfc8): undefined reference to `crypto_default_rng'
aarch64-linux-ld: ecc.c:(.text+0xff4): undefined reference to `crypto_put_default_rng'

Move the 'select CRYPTO_DEFAULT_RNG' statement into the correct symbol.

Fixes: 0d7a78643f ("crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm")
Fixes: 4e6602916b ("crypto: ecdsa - Add support for ECDSA signature verification")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-10-01 14:41:23 +08:00
Uwe Kleine-König
f7324d4ba9 hwrng: meson - Improve error handling for core clock
-ENOENT (ie. "there is no clock") is fine to ignore for an optional
clock, other values are not supposed to be ignored and should be
escalated to the caller (e.g. -EPROBE_DEFER). Ignore -ENOENT by using
devm_clk_get_optional().

While touching this code also add an error message for the fatal errors.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-10-01 14:41:23 +08:00
Krzysztof Kozlowski
9b870e8c04 phy: samsung: unify naming and describe driver in KConfig
We use everywhere "Samsung" and "Exynos", not the uppercase versions.
Describe better which driver applies to which SoC, to make configuring
kernel for Samsung SoC easier.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210924132658.109814-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01 11:46:20 +05:30
Mauro Carvalho Chehab
ccfdcb325f ABI: sysfs-bus-soundwire-slave: use wildcards on What definitions
An "N" upper letter is not a wildcard, nor can easily be identified
by script, specially since the USB sysfs define things like.
bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl
to convert it into a Regex.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/416f4a746c116147abb08fb0155a6a4ed065dfd7.1631782432.git.mchehab+huawei@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01 10:06:01 +05:30
Mauro Carvalho Chehab
3733c12ef4 ABI: sysfs-bus-soundwire-master: use wildcards on What definitions
An "N" upper letter is not a wildcard, nor can easily be identified
by script, specially since the USB sysfs define things like.
bNumInterfaces. Use, instead, <N>, in order to let script/get_abi.pl
to convert it into a Regex.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/eb62c19ce92c0dc1a50eb57c1052866256250644.1631782432.git.mchehab+huawei@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01 10:06:01 +05:30
Srinivas Kandagatla
75eac387a2 soundwire: debugfs: use controller id and link_id for debugfs
link_id can be zero and if we have multiple controller instances
in a system like Qualcomm debugfs will end-up with duplicate namespace
resulting in incorrect debugfs entries.

Using bus-id and link-id combination should give a unique debugfs directory
entry and should fix below warning too.
"debugfs: Directory 'master-0' with parent 'soundwire' already present!"

Fixes: bf03473d5b ("soundwire: add debugfs support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210907105332.1257-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-10-01 09:53:47 +05:30
Zhang Yi
f2c7797350 ext4: recheck buffer uptodate bit under buffer lock
Commit 8e33fadf94 ("ext4: remove an unnecessary if statement in
__ext4_get_inode_loc()") forget to recheck buffer's uptodate bit again
under buffer lock, which may overwrite the buffer if someone else have
already brought it uptodate and changed it.

Fixes: 8e33fadf94 ("ext4: remove an unnecessary if statement in __ext4_get_inode_loc()")
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210910080316.70421-1-yi.zhang@huawei.com
2021-10-01 00:10:28 -04:00
yangerkun
42cb447410 ext4: fix potential infinite loop in ext4_dx_readdir()
When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an
infinite loop since if info->last_pos != ctx->pos this will reset the
directory scan and reread the failing entry.  For example:

1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as
   leaf block which own the ext4_dir_entry_2
2. block 1 read ok and call_filldir which will fill the dirent and update
   the ctx->pos
3. block 2 read fail, but we has already fill some dirent, so we will
   return back to userspace will a positive return val(see ksys_getdents64)
4. the second ext4_dx_readdir will reset the world since info->last_pos
   != ctx->pos, and will also init the curr_hash which pos to block 1
5. So we will read block1 too, and once block2 still read fail, we can
   only fill one dirent because the hash of the entry in block1(besides
   the last one) won't greater than curr_hash
6. this time, we forget update last_pos too since the read for block2
   will fail, and since we has got the one entry, ksys_getdents64 can
   return success
7. Latter we will trapped in a loop with step 4~6

Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com
2021-10-01 00:05:09 -04:00
yangerkun
bb9464e083 ext4: flush s_error_work before journal destroy in ext4_fill_super
The error path in ext4_fill_super forget to flush s_error_work before
journal destroy, and it may trigger the follow bug since
flush_stashed_error_work can run concurrently with journal destroy
without any protection for sbi->s_journal.

[32031.740193] EXT4-fs (loop66): get root inode failed
[32031.740484] EXT4-fs (loop66): mount failed
[32031.759805] ------------[ cut here ]------------
[32031.759807] kernel BUG at fs/jbd2/transaction.c:373!
[32031.760075] invalid opcode: 0000 [#1] SMP PTI
[32031.760336] CPU: 5 PID: 1029268 Comm: kworker/5:1 Kdump: loaded
4.18.0
[32031.765112] Call Trace:
[32031.765375]  ? __switch_to_asm+0x35/0x70
[32031.765635]  ? __switch_to_asm+0x41/0x70
[32031.765893]  ? __switch_to_asm+0x35/0x70
[32031.766148]  ? __switch_to_asm+0x41/0x70
[32031.766405]  ? _cond_resched+0x15/0x40
[32031.766665]  jbd2__journal_start+0xf1/0x1f0 [jbd2]
[32031.766934]  jbd2_journal_start+0x19/0x20 [jbd2]
[32031.767218]  flush_stashed_error_work+0x30/0x90 [ext4]
[32031.767487]  process_one_work+0x195/0x390
[32031.767747]  worker_thread+0x30/0x390
[32031.768007]  ? process_one_work+0x390/0x390
[32031.768265]  kthread+0x10d/0x130
[32031.768521]  ? kthread_flush_work_fn+0x10/0x10
[32031.768778]  ret_from_fork+0x35/0x40

static int start_this_handle(...)
    BUG_ON(journal->j_flags & JBD2_UNMOUNT); <---- Trigger this

Besides, after we enable fast commit, ext4_fc_replay can add work to
s_error_work but return success, so the latter journal destroy in
ext4_load_journal can trigger this problem too.

Fix this problem with two steps:
1. Call ext4_commit_super directly in ext4_handle_error for the case
   that called from ext4_fc_replay
2. Since it's hard to pair the init and flush for s_error_work, we'd
   better add a extras flush_work before journal destroy in
   ext4_fill_super

Besides, this patch will call ext4_commit_super in ext4_handle_error for
any nojournal case too. But it seems safe since the reason we call
schedule_work was that we should save error info to sb through journal
if available. Conversely, for the nojournal case, it seems useless delay
commit superblock to s_error_work.

Fixes: c92dc85684 ("ext4: defer saving error info from atomic context")
Fixes: 2d01ddc866 ("ext4: save error info to sb through journal if available")
Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210924093917.1953239-1-yangerkun@huawei.com
2021-10-01 00:04:01 -04:00
Ritesh Harjani
75ca6ad408 ext4: fix loff_t overflow in ext4_max_bitmap_size()
We should use unsigned long long rather than loff_t to avoid
overflow in ext4_max_bitmap_size() for comparison before returning.
w/o this patch sbi->s_bitmap_maxbytes was becoming a negative
value due to overflow of upper_limit (with has_huge_files as true)

Below is a quick test to trigger it on a 64KB pagesize system.

sudo mkfs.ext4 -b 65536 -O ^has_extents,^64bit /dev/loop2
sudo mount /dev/loop2 /mnt
sudo echo "hello" > /mnt/hello 	-> This will error out with
				"echo: write error: File too large"

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/594f409e2c543e90fd836b78188dfa5c575065ba.1622867594.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-10-01 00:03:51 -04:00
Jeffle Xu
6fed83957f ext4: fix reserved space counter leakage
When ext4_insert_delayed block receives and recovers from an error from
ext4_es_insert_delayed_block(), e.g., ENOMEM, it does not release the
space it has reserved for that block insertion as it should. One effect
of this bug is that s_dirtyclusters_counter is not decremented and
remains incorrectly elevated until the file system has been unmounted.
This can result in premature ENOSPC returns and apparent loss of free
space.

Another effect of this bug is that
/sys/fs/ext4/<dev>/delayed_allocation_blocks can remain non-zero even
after syncfs has been executed on the filesystem.

Besides, add check for s_dirtyclusters_counter when inode is going to be
evicted and freed. s_dirtyclusters_counter can still keep non-zero until
inode is written back in .evict_inode(), and thus the check is delayed
to .destroy_inode().

Fixes: 51865fda28 ("ext4: let ext4 maintain extent status tree")
Cc: stable@kernel.org
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210823061358.84473-1-jefflexu@linux.alibaba.com
2021-10-01 00:03:41 -04:00
Hou Tao
a2c2f0826e ext4: limit the number of blocks in one ADD_RANGE TLV
Now EXT4_FC_TAG_ADD_RANGE uses ext4_extent to track the
newly-added blocks, but the limit on the max value of
ee_len field is ignored, and it can lead to BUG_ON as
shown below when running command "fallocate -l 128M file"
on a fast_commit-enabled fs:

  kernel BUG at fs/ext4/ext4_extents.h:199!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 3 PID: 624 Comm: fallocate Not tainted 5.14.0-rc6+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  RIP: 0010:ext4_fc_write_inode_data+0x1f3/0x200
  Call Trace:
   ? ext4_fc_write_inode+0xf2/0x150
   ext4_fc_commit+0x93b/0xa00
   ? ext4_fallocate+0x1ad/0x10d0
   ext4_sync_file+0x157/0x340
   ? ext4_sync_file+0x157/0x340
   vfs_fsync_range+0x49/0x80
   do_fsync+0x3d/0x70
   __x64_sys_fsync+0x14/0x20
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Simply fixing it by limiting the number of blocks
in one EXT4_FC_TAG_ADD_RANGE TLV.

Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Cc: stable@kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210820044505.474318-1-houtao1@huawei.com
2021-10-01 00:03:25 -04:00
Moritz Fischer
8001f21fcd MAINTAINERS: Add Hao and Yilun as maintainers
Hao and Yilun have agreed to help out with maintenance.
Both have been active in the Linux FPGA community for a long time
and we need backups for vacation and load-balancing.

Cc: Xu Yilun <yilun.xu@intel.com>
Cc: Wu Hao <hao.wu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
2021-09-30 20:32:46 -07:00
Masami Hiramatsu
bf094cffea x86/kprobes: Fixup return address in generic trampoline handler
In x86, the fake return address on the stack saved by
__kretprobe_trampoline() will be replaced with the real return
address after returning from trampoline_handler(). Before fixing
the return address, the real return address can be found in the
'current->kretprobe_instances'.

However, since there is a window between updating the
'current->kretprobe_instances' and fixing the address on the stack,
if an interrupt happens at that timing and the interrupt handler
does stacktrace, it may fail to unwind because it can not get
the correct return address from 'current->kretprobe_instances'.

This will eliminate that window by fixing the return address
right before updating 'current->kretprobe_instances'.

Link: https://lkml.kernel.org/r/163163057094.489837.9044470370440745866.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-09-30 21:24:08 -04:00
Masami Hiramatsu
7da89495d5 tracing: Show kretprobe unknown indicator only for kretprobe_trampoline
ftrace shows "[unknown/kretprobe'd]" indicator all addresses in the
kretprobe_trampoline, but the modified address by kretprobe should
be only kretprobe_trampoline+0.

Link: https://lkml.kernel.org/r/163163056044.489837.794883849706638013.stgit@devnote2

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-09-30 21:24:08 -04:00