Remove the unused aoss-qmp header from the list of includes.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-13-git-send-email-sibis@codeaurora.org
Strip out the load state power-domain support from the driver since the
low power mode signalling for the co-processors is now accessible through
the direct qmp message send interface.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-12-git-send-email-sibis@codeaurora.org
Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SM8350 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-11-git-send-email-sibis@codeaurora.org
Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SM8250 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-10-git-send-email-sibis@codeaurora.org
Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SM8150 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-9-git-send-email-sibis@codeaurora.org
Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SDM845 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-8-git-send-email-sibis@codeaurora.org
Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SC7280 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-7-git-send-email-sibis@codeaurora.org
Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SC7180 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-6-git-send-email-sibis@codeaurora.org
The power-domains exposed by AOSS QMP node are used to notify the Always
on Subsystem (AOSS) that a particular co-processor is up/down. These
co-processors enter low-power modes independent to that of the application
processor and their states are expected to remain unaltered across system
suspend/resume cycles. To achieve this behavior let's drop the load
power-domain and replace them with generic qmp_send interface instead.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631800770-371-2-git-send-email-sibis@codeaurora.org
Compiling sb_watchdog needs to clearly define SIBYTE_HDR_FEATURES.
In arch/mips/sibyte/Platform like:
cflags-$(CONFIG_SIBYTE_BCM112X) += \
-I$(srctree)/arch/mips/include/asm/mach-sibyte \
-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
Otherwise, SIBYTE_HDR_FEATURES is SIBYTE_HDR_FMASK_ALL.
SIBYTE_HDR_FMASK_ALL is mean:
#define SIBYTE_HDR_FMASK_ALL SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \
| SIBYTE_HDR_FMASK_1480_ALL)
So, If not limited to CPU_SB1, we will get such an error:
arch/mips/include/asm/sibyte/bcm1480_scd.h:261: error: "M_SPC_CFG_CLEAR" redefined [-Werror]
arch/mips/include/asm/sibyte/bcm1480_scd.h:262: error: "M_SPC_CFG_ENABLE" redefined [-Werror]
Fixes: da2a68b3eb ("watchdog: Enable COMPILE_TEST where possible")
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The recent block layer refactoring broke the way how the pmem driver
abused device_add_disk. Fix this by properly passing the attribute groups
to device_add_disk.
Fixes: 52b85909f8 ("block: fold register_disk into device_add_disk")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20210922173431.2454024-2-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When ACPI NFIT table is failing to populate correct numa information
on arm64, dax_kmem will get NUMA_NO_NODE from the NFIT driver.
Without this patch, pmem can't be probed as RAM devices on arm64 guest:
$ndctl create-namespace -fe namespace0.0 --mode=devdax --map=dev -s 1g -a 128M
kmem dax0.0: rejecting DAX region [mem 0x240400000-0x2bfffffff] with invalid node: -1
kmem: probe of dax0.0 failed with error -22
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jia He <justin.he@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: c221c0b030 ("device-dax: "Hotplug" persistent memory for use like normal RAM")
Link: https://lore.kernel.org/r/20210922152919.6940-1-justin.he@arm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
dax_attribute_group is only used by the pmem driver, and can avoid the
completely pointless lookup by the disk name if moved there. This
leaves just a single caller of dax_get_by_host, so move dax_get_by_host
into the same ifdef block as that caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20210922173431.2454024-3-hch@lst.de
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit 9d682ea6bc ("vboxsf: Fix the check for the old binary
mount-arguments struct") was meant to fix a build error due to sign
mismatch in 'char' and the use of character constants, but it just moved
the error elsewhere, in that on some architectures characters and signed
and on others they are unsigned, and that's just how the C standard
works.
The proper fix is a simple "don't do that then". The code was just
being silly and odd, and it should never have cared about signed vs
unsigned characters in the first place, since what it is testing is not
four "characters", but four bytes.
And the way to compare four bytes is by using "memcmp()".
Which compilers will know to just turn into a single 32-bit compare with
a constant, as long as you don't have crazy debug options enabled.
Link: https://lore.kernel.org/lkml/20210927094123.576521-1-arnd@kernel.org/
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the CQE size of the user space is not the size supported by the
hardware, the creation of CQ should be stopped.
Fixes: 09a5f210f6 ("RDMA/hns: Add support for CQE in size of 64 Bytes")
Link: https://lore.kernel.org/r/20210927125557.15031-3-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The size of CQE is different for different versions of hardware, so the
driver needs to specify the size of CQE explicitly.
Fixes: 09a5f210f6 ("RDMA/hns: Add support for CQE in size of 64 Bytes")
Link: https://lore.kernel.org/r/20210927125557.15031-2-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pointers should be printed with %p or %px rather than cast to 'unsigned
long long' and printed with %llx. Change %llx to %p to print the secured
pointer.
Fixes: 042a00f93a ("IB/{ipoib,hfi1}: Add a timeout handler for rdma_netdev")
Link: https://lore.kernel.org/r/20210922134857.619602-1-qtxuning1999@sjtu.edu.cn
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Acked-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This patch series adds support for Cadence's XSPI controller.
It supports 3 work modes.
1. ACMD (auto command) work mode
ACMD name is because it uses auto command engine in the controller.
It further has 2 modes PIO and CDMA (command DMA).
The CDMA work mode is dedicated for high-performance application
where very low software overhead is required. In this mode the
Command Engine is programmed by the series of linked descriptors
stored in system memory. These descriptors provide commands to execute
and store status information for finished commands.
The PIO mode work mode is dedicated for single operation where
constructing a linked list of descriptors would require too
much effort.
2. STIG (Software Triggered Instruction Generator) work mode
In STIG mode, controller sends low-level instructions to memory.
Each instruction is 128-bit width. There is special instruction
DataSequence which carries information about data phase.
Driver uses Slave DMA interface to transfer data as only this
interface can be used in STIG work mode.
3. Direct work mode
This work mode allows sending data without invoking any command through
the slave interface.
Currently only STIG work mode is enabled, remaining work modes will
be added later.
Changes since v5:
1. Added adjust_op_size to adjust op size according to sdma size.
Changes since v4:
1. Changed reg region names and lengths as suggested by Rob.
Changes since v3:
1. Removed ACMD PIO mode.
2. Return IRQ_HANDLED only for handled interrupts.
3. DT binding changes.
Changes since v2:
1. Removed extra lock around exec_op.
2. Removed PHY parameters setting from the driver, those will be
handled by bootstrap pins available in the controller.
Changes since v1:
1. Use ACMD PIO work mode for NOR read, program and erase operations,
for everything else use STIG(Software Triggered Instruction
Generator) work mode.
2. Changes suggested by Lukas.
Parshuram Thombare (2):
spi: cadence: add dt-bindings documentation for Cadence XSPI
controller
spi: cadence: add support for Cadence XSPI controller
.../devicetree/bindings/spi/cdns,xspi.yaml | 77 +++
drivers/spi/Kconfig | 12 +
drivers/spi/Makefile | 1 +
drivers/spi/spi-cadence-xspi.c | 640 +++++++++++++++++++++
4 files changed, 730 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/cdns,xspi.yaml
create mode 100644 drivers/spi/spi-cadence-xspi.c
--
2.7.4
This series of patches gradually separates the ASoC specific wm_adsp
code from that required to manage firmware in Cirrus Logic DSPs.
The series starts with renaming, progresses to splitting the
functionality before finally moving the independent functionality into
drivers/firmware so that it can be used by both the existing ASoC
wm_adsp and new non-audio parts.
Charles Keepax (3):
ASoC: wm_adsp: Move check for control existence
ASoC: wm_adsp: Switch to using wm_coeff_read_ctrl for compressed
buffers
ASoC: wm_adsp: Move sys_config_size to wm_adsp
Simon Trimmer (13):
ASoC: wm_adsp: Remove use of snd_ctl_elem_type_t
ASoC: wm_adsp: Cancel ongoing work when removing controls
ASoC: wm_adsp: Rename generic DSP support
ASoC: wm_adsp: Introduce cs_dsp logging macros
ASoC: wm_adsp: Separate some ASoC and generic functions
ASoC: wm_adsp: Split DSP power operations into helper functions
ASoC: wm_adsp: Separate generic cs_dsp_coeff_ctl handling
ASoC: wm_adsp: Move check of dsp->running to better place
ASoC: wm_adsp: Pass firmware names as parameters when starting DSP
core
ASoC: wm_adsp: move firmware loading to client
ASoC: wm_adsp: Split out struct cs_dsp from struct wm_adsp
ASoC: wm_adsp: Separate wm_adsp specifics in cs_dsp_client_ops
firmware: cs_dsp: add driver to support firmware loading on Cirrus
Logic DSPs
MAINTAINERS | 11 +
drivers/firmware/Kconfig | 1 +
drivers/firmware/Makefile | 1 +
drivers/firmware/cirrus/Kconfig | 5 +
drivers/firmware/cirrus/Makefile | 3 +
drivers/firmware/cirrus/cs_dsp.c | 3109 ++++++++++++++++
include/linux/firmware/cirrus/cs_dsp.h | 242 ++
.../linux/firmware/cirrus}/wmfw.h | 8 +-
sound/soc/codecs/Kconfig | 1 +
sound/soc/codecs/cs47l15.c | 22 +-
sound/soc/codecs/cs47l24.c | 20 +-
sound/soc/codecs/cs47l35.c | 24 +-
sound/soc/codecs/cs47l85.c | 32 +-
sound/soc/codecs/cs47l90.c | 34 +-
sound/soc/codecs/cs47l92.c | 20 +-
sound/soc/codecs/madera.c | 18 +-
sound/soc/codecs/wm2200.c | 30 +-
sound/soc/codecs/wm5102.c | 16 +-
sound/soc/codecs/wm5110.c | 24 +-
sound/soc/codecs/wm_adsp.c | 3188 ++---------------
sound/soc/codecs/wm_adsp.h | 105 +-
21 files changed, 3794 insertions(+), 3120 deletions(-)
create mode 100644 drivers/firmware/cirrus/Kconfig
create mode 100644 drivers/firmware/cirrus/Makefile
create mode 100644 drivers/firmware/cirrus/cs_dsp.c
create mode 100644 include/linux/firmware/cirrus/cs_dsp.h
rename {sound/soc/codecs => include/linux/firmware/cirrus}/wmfw.h (91%)
--
2.33.0
The CONFIG_NO_HZ_IDLE paragraph is using "dyntick-idle mode" before
having defined it while the definition comes a couple of paragraphs
later.
That is leaving the reader with scratching head what that dyntick-idle
mode might be. Pull its definition up so that it is clear.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20210914203355.21360-1-bp@alien8.de
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Mentioning the current missing information in the pagemap and alternatives
on how to retrieve it, in case someone stumbles upon unexpected behaviour.
Signed-off-by: Tiberiu A Georgescu <tiberiu.georgescu@nutanix.com>
Reviewed-by: Ivan Teterevkov <ivan.teterevkov@nutanix.com>
Reviewed-by: Florian Schmidt <florian.schmidt@nutanix.com>
Reviewed-by: Carl Waldspurger <carl.waldspurger@nutanix.com>
Reviewed-by: Jonathan Davies <jonathan.davies@nutanix.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Link: https://lore.kernel.org/r/20210923064618.157046-2-tiberiu.georgescu@nutanix.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
io-wq threads block all signals, except SIGKILL and SIGSTOP. We should not
need any extra checking of signal_pending or fatal_signal_pending, rely
exclusively on whether or not get_signal() tells us to exit.
The original debugging of this issue led to the false positive that we
were exiting on non-fatal signals, but that is not the case. The issue
was around races with nr_workers accounting.
Fixes: 87c1696655 ("io-wq: ensure we exit if thread group is exiting")
Fixes: 15e20db2e0 ("io-wq: only exit on fatal signals")
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update the MSI controller binding to add an msi-ranges property
that specifies how MSIs map onto regular interrupts on some other
interrupt controller.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Link: https://lore.kernel.org/r/20210921183420.436-3-kettenis@openbsd.org
Signed-off-by: Rob Herring <robh@kernel.org>
Split the MSI controller bindings from the MSI binding document
into DT schema format using json-schema.
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Link: https://lore.kernel.org/r/20210921183420.436-2-kettenis@openbsd.org
Signed-off-by: Rob Herring <robh@kernel.org>
During boot time kernel configured with OF=y but USE_OF=n displays the
following warnings and hangs shortly after starting userspace:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/irq/irqdomain.c:695 irq_create_mapping_affinity+0x29/0xc0
irq_create_mapping_affinity(, 6) called with NULL domain
CPU: 0 PID: 0 Comm: swapper Not tainted 5.15.0-rc3-00001-gd67ed2510d28 #30
Call Trace:
__warn+0x69/0xc4
warn_slowpath_fmt+0x6c/0x94
irq_create_mapping_affinity+0x29/0xc0
local_timer_setup+0x40/0x88
time_init+0xb1/0xe8
start_kernel+0x31d/0x3f4
_startup+0x13b/0x13b
---[ end trace 1e6630e1c5eda35b ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/xtensa/kernel/time.c:141 local_timer_setup+0x58/0x88
error: can't map timer irq
CPU: 0 PID: 0 Comm: swapper Tainted: G W 5.15.0-rc3-00001-gd67ed2510d28 #30
Call Trace:
__warn+0x69/0xc4
warn_slowpath_fmt+0x6c/0x94
local_timer_setup+0x58/0x88
time_init+0xb1/0xe8
start_kernel+0x31d/0x3f4
_startup+0x13b/0x13b
---[ end trace 1e6630e1c5eda35c ]---
Failed to request irq 0 (timer)
Fix that by calling irqchip_init only when CONFIG_USE_OF is selected and
calling legacy interrupt controller init otherwise.
Fixes: da844a8177 ("xtensa: add device trees support")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Some apple controllers use the command id as an index to implementation
specific data structures and will fail if the value is out of bounds.
The nvme driver's recently introduced command sequence number breaks
this controller.
Provide a quirk so these spec incompliant controllers can function as
before. The driver will not have the ability to detect bad completions
when this quirk is used, but we weren't previously checking this anyway.
The quirk bit was selected so that it can readily apply to stable.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214509
Cc: Sven Peter <sven@svenpeter.dev>
Reported-by: Orlando Chamberlain <redecorating@protonmail.com>
Reported-by: Aditya Garg <gargaditya08@live.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210927154306.387437-1-kbusch@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The e100_get_regs function is used to implement a simple register dump
for the e100 device. The data is broken into a couple of MAC control
registers, and then a series of PHY registers, followed by a memory dump
buffer.
The total length of the register dump is defined as (1 + E100_PHY_REGS)
* sizeof(u32) + sizeof(nic->mem->dump_buf).
The logic for filling in the PHY registers uses a convoluted inverted
count for loop which counts from E100_PHY_REGS (0x1C) down to 0, and
assigns the slots 1 + E100_PHY_REGS - i. The first loop iteration will
fill in [1] and the final loop iteration will fill in [1 + 0x1C]. This
is actually one more than the supposed number of PHY registers.
The memory dump buffer is then filled into the space at
[2 + E100_PHY_REGS] which will cause that memcpy to assign 4 bytes past
the total size.
The end result is that we overrun the total buffer size allocated by the
kernel, which could lead to a panic or other issues due to memory
corruption.
It is difficult to determine the actual total number of registers
here. The only 8255x datasheet I could find indicates there are 28 total
MDI registers. However, we're reading 29 here, and reading them in
reverse!
In addition, the ethtool e100 register dump interface appears to read
the first PHY register to determine if the device is in MDI or MDIx
mode. This doesn't appear to be documented anywhere within the 8255x
datasheet. I can only assume it must be in register 28 (the extra
register we're reading here).
Lets not change any of the intended meaning of what we copy here. Just
extend the space by 4 bytes to account for the extra register and
continue copying the data out in the same order.
Change the E100_PHY_REGS value to be the correct total (29) so that the
total register dump size is calculated properly. Fix the offset for
where we copy the dump buffer so that it doesn't overrun the total size.
Re-write the for loop to use counting up instead of the convoluted
down-counting. Correct the mdio_read offset to use the 0-based register
offsets, but maintain the bizarre reverse ordering so that we have the
ABI expected by applications like ethtool. This requires and additional
subtraction of 1. It seems a bit odd but it makes the flow of assignment
into the register buffer easier to follow.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
commit abf9b90205 ("e100: cleanup unneeded math") tried to simplify
e100_get_regs_len and remove a double 'divide and then multiply'
calculation that the e100_reg_regs_len function did.
This change broke the size calculation entirely as it failed to account
for the fact that the numbered registers are actually 4 bytes wide and
not 1 byte. This resulted in a significant under allocation of the
register buffer used by e100_get_regs.
Fix this by properly multiplying the register count by u32 first before
adding the size of the dump buffer.
Fixes: abf9b90205 ("e100: cleanup unneeded math")
Reported-by: Felicitas Hetzelt <felicitashetzelt@gmail.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
udmabuf has the following implicit declaration warns:
udmabuf.c:30:10: warning: implicit declaration of function 'open';
udmabuf.c:42:8: warning: implicit declaration of function 'fcntl'
These are caused due to not including fcntl.h and including just
linux/fcntl.h. Fix it to include fcntl.h which will bring in the
linux/fcntl.h. In addition, define __EXPORTED_HEADERS__ to bring in
F_ADD_SEALS and F_SEAL_SHRINK defines and fix the following error
that show up when just fcntl.h is included.
udmabuf.c:45:21: error: 'F_ADD_SEALS' undeclared
45 | ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK);
| ^~~~~~~~~~~
udmabuf.c:45:34: error: 'F_SEAL_SHRINK' undeclared
45 | ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK);
| ^~~~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A reference to the carrier module was taken on every open but was only
released once when the final reference to the tty struct was dropped.
Fix this by taking the module reference and initialising the tty driver
data when installing the tty.
Fixes: 82a82340ba ("ipoctal: get carrier driver to avoid rmmod")
Cc: stable@vger.kernel.org # 3.18
Cc: Federico Vaga <federico.vaga@cern.ch>
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-6-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the missing error handling when allocating the transmit buffer to
avoid dereferencing a NULL pointer in write() should the allocation
ever fail.
Fixes: ba4dc61fe8 ("Staging: ipack: add support for IP-OCTAL mezzanine board")
Cc: stable@vger.kernel.org # 3.5
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Registration of the ipoctal tty devices is unlikely to fail, but if it
ever does, make sure not to deregister a never registered tty device
(and dereference a NULL pointer) when the driver is later unbound.
Fixes: 2afb41d9d3 ("Staging: ipack/devices/ipoctal: Check tty_register_device return value.")
Cc: stable@vger.kernel.org # 3.7
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to set the tty class-device driver data before registering the
tty to avoid having a racing open() dereference a NULL pointer.
Fixes: 9c1d784afc ("Staging: ipack/devices/ipoctal: Get rid of ipoctal_list.")
Cc: stable@vger.kernel.org # 3.7
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tty driver name is used also after registering the driver and must
specifically not be allocated on the stack to avoid leaking information
to user space (or triggering an oops).
Drivers should not try to encode topology information in the tty device
name but this one snuck in through staging without anyone noticing and
another driver has since copied this malpractice.
Fixing the ABI is a separate issue, but this at least plugs the security
hole.
Fixes: ba4dc61fe8 ("Staging: ipack: add support for IP-OCTAL mezzanine board")
Cc: stable@vger.kernel.org # 3.5
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20210917114622.5412-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>