The code to calculate the cfb stride/size is a bit of mess.
The cfb size is getting calculated based purely on the plane
stride and plane height. That doesn't account for extra
alignment we want for the cfb stride. The gen9 override
stride OTOH is just calculated based on the plane width, and
it does try to make things more aligned but any extra alignment
added there is not considered in the cfb size calculations.
So not at all convinced this is working as intended. Additionally
the compression limit handling is split between the cfb allocation
code and g4x_dpfc_ctl_limit() (for the 16bpp case), which is just
confusing.
Let's streamline the whole thing:
- Start with the plane stride, convert that into cfb stride (cfb is
always 4 bytes per pixel). All the calculations will assume 1:1
compression limit since that will give us the max values, and we
don't yet know how much stolen memory we will be able to allocate
- Align the cfb stride to 512 bytes on modern platforms. This guarantees
the 4 line segment will be 512 byte aligned regardles of the final
compression limit we choose later. The 512 byte alignment for the
segment is required by at least some of the platforms, and just doing
it always seems like the easiest option
- Figure out if we need to use the override stride or not. For X-tiled
it's never needed since the plane stride is already 512 byte aligned,
for Y-tiled it will be needed if the plane stride is not a multiple
of 512 bytes, and for linear it's apparently always needed because the
hardware miscalculates the cfb stride as PLANE_STRIDE*512 instead of
the PLANE_STRIDE*64 that it use with linear.
- The cfb size will be calculated based on the aligned cfb stride to
guarantee we actually reserved enough stolen memory and the FBC hw
won't end up scribbling over whatever else is allocated in stolen
- The compression limit handling we just do fully in the cfb allocation
code to make things less confusing
v2: Write the min cfb segment stride calculation in a more
explicit way to make it clear what is going on
v3: Remeber to update fbc->limit when changing to 16bpp
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v2
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923042151.19052-1-ville.syrjala@linux.intel.com
- Work around a bad GIC integration on a Renesas platform, where the
interconnect cannot deal with byte-sized MMIO accesses
- Cleanup another Renesas driver abusing the comma operator
- Fix a potential GICv4 memory leak on an error path
- Make the type of 'size' consistent with the rest of the code in
__irq_domain_add()
- Fix a regression in the Armada 370-XP IPI path
- Fix the build for the obviously unloved goldfish-pic
- Some documentation fixes
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmFNk10PHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpD59kP/A4Al80ndT4GhIlj1b+LolpBctOl3OxNpoYm
uCsf/LjmNjEQ62F3wd0lMe/qgioU+MKssA94/4pp9IkySNSxToHpaD5WwScaGKP4
twATEs3cdAmrvE8YTiq+bjuX8mJ7toqhwRWjc2ZTlql4l3DbHzMoeywwnULza/A8
ZGLJZ4SdvBQPUnMtEXJa9jHwtxRd0irinUApO5XpfRMiGAfCaCD2XfOMVmeBX3TP
OFtpsxSluIURaAhEBsr60saagqftGrCABr8m19zGynutnosbVvDYq4HUIlIYxeRm
7BWOskyGw1CZ9beylIO7v2Vp5pNx5KR4t/5wL7+tZXhY7VrgPPQjFf1CbJwB8NUz
p8ad7n9yHJvzc90mzgqZfuAr7GBZt5wFXj1vKw5hDxlTDo4LfaMD+2Qkp2KOESqi
ejX3vdrVgLCadzgDqpkjBRpsqjjG+1x+rjji4dpaADEUYxUoyX5lYObiImOznTeS
9NitgJe5aGFOo0y7DOFYNSc4e2ODfGxTwVl4NTwd4NGVJ+CeBYHlow1B8+5NfoKo
rqMgo6dgyKjfwyN6YxVo6RDvDe+e/xTKk7s1kaVzYVgQeDh5GeMd9SJ0xms3Dbhe
pjZLsAmnnIOoHWqcvQOOFJPkhqQBpuY8Gbtw0X3JVrj/C/6HoAAS0FyqhYw53dSC
gVC3Im4R
=Fn7y
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Work around a bad GIC integration on a Renesas platform, where the
interconnect cannot deal with byte-sized MMIO accesses
- Cleanup another Renesas driver abusing the comma operator
- Fix a potential GICv4 memory leak on an error path
- Make the type of 'size' consistent with the rest of the code in
__irq_domain_add()
- Fix a regression in the Armada 370-XP IPI path
- Fix the build for the obviously unloved goldfish-pic
- Some documentation fixes
Link: https://lore.kernel.org/r/20210924090933.2766857-1-maz@kernel.org
The return value of devm_clk_get should in general be propagated to
upper layer. In this case the clk is optional, use the appropriate
wrapper instead of interpreting all errors as "The optional clk is not
available".
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210923201113.398932-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Old code produces -24999 for 0b1110011100000000 input in standard format due to
always rounding up rather than "away from zero".
Use the common macro for division, unify and simplify the conversion code along
the way.
Fixes: 9410700b88 ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips")
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20210924093011.26083-3-fercerpav@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
For both local and remote sensors all the supported ICs can report an
"undervoltage lockout" condition which means the conversion wasn't
properly performed due to insufficient power supply voltage and so the
measurement results can't be trusted.
Fixes: 9410700b88 ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips")
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20210924093011.26083-2-fercerpav@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Function i2c_smbus_read_byte_data() can return a negative error number
instead of the data read if I2C transaction failed for whatever reason.
Lack of error checking can lead to serious issues on production
hardware, e.g. errors treated as temperatures produce spurious critical
temperature-crossed-threshold errors in BMC logs for OCP server
hardware. The patch was tested with Mellanox OCP Mezzanine card
emulating TMP421 protocol for temperature sensing which sometimes leads
to I2C protocol error during early boot up stage.
Fixes: 9410700b88 ("hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/r/20210924093011.26083-1-fercerpav@gmail.com
[groeck: dropped unnecessary line breaks]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
gcc 8.3 and 5.4 throw this:
In function 'modify_qp_init_to_rtr',
././include/linux/compiler_types.h:322:38: error: call to '__compiletime_assert_1859' declared with attribute error: FIELD_PREP: value too large for the field
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
[..]
drivers/infiniband/hw/hns/hns_roce_common.h:91:52: note: in expansion of macro 'FIELD_PREP'
*((__le32 *)ptr + (field_h) / 32) |= cpu_to_le32(FIELD_PREP( \
^~~~~~~~~~
drivers/infiniband/hw/hns/hns_roce_common.h:95:39: note: in expansion of macro '_hr_reg_write'
#define hr_reg_write(ptr, field, val) _hr_reg_write(ptr, field, val)
^~~~~~~~~~~~~
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4412:2: note: in expansion of macro 'hr_reg_write'
hr_reg_write(context, QPC_LP_PKTN_INI, lp_pktn_ini);
Because gcc has miscalculated the constantness of lp_pktn_ini:
mtu = ib_mtu_enum_to_int(ib_mtu);
if (WARN_ON(mtu < 0)) [..]
lp_pktn_ini = ilog2(MAX_LP_MSG_LEN / mtu);
Since mtu is limited to {256,512,1024,2048,4096} lp_pktn_ini is between 4
and 8 which is compatible with the 4 bit field in the FIELD_PREP.
Work around this broken compiler by adding a 'can never be true'
constraint on lp_pktn_ini's value which clears out the problem.
Fixes: f0cb411aad ("RDMA/hns: Use new interface to modify QP context")
Link: https://lore.kernel.org/r/0-v1-c773ecb137bc+11f-hns_gcc8_jgg@nvidia.com
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This code works, but it is cleaner to use a semicolon at the end of a
statement instead of a comma.
Extracted from a big anonymous patch by Julia Lawall
<julia.lawall@inria.fr>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210914073155.3883532-1-geert@linux-m68k.org
Add a m68k-only set_fc helper to set the SFC and DFC registers for the
few places that need to override it for special MM operations, but
disconnect that from the deprecated kernel-wide set_fs() API.
Note that the SFC/DFC registers are context switched, so there is no need
to disable preemption.
Partially based on an earlier patch from
Linus Torvalds <torvalds@linux-foundation.org>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-7-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Allow non-faulting access to kernel addresses without overriding the
address space. Implemented by passing the instruction name to the
low-level assembly macros as an argument, and force the use of the
normal move instructions for kernel access.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-6-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Add new helpers for doing the grunt work of the 8-byte {get,put}_user
routines to allow for better reuse.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-5-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Simplify the handling a bit by using the common helper instead of
referencing undefined symbols.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-4-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
The 030 case in virt_to_phys_slow can't ever be reached, so remove it.
Suggested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-3-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Document that access_ok is completely broken for coldfire and friends at
the moment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Link: https://lore.kernel.org/r/20210916070405.52750-2-hch@lst.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
sigreturn has to deal with an unpleasant problem - exception stack frames
have different sizes, depending upon the exception (and processor model, as
well) and variable-sized part of exception frame may contain information
needed for instruction restart. So when signal handler terminates and calls
sigreturn to resume the execution at the place where we'd been when we caught
the signal, it has to rearrange the frame at the bottom of kernel stack.
Worse, it might need to open a gap in the kernel stack, shifting pt_regs
towards lower addresses.
Doing that from C is insane - we'd need to shift stack frames (return addresses,
local variables, etc.) of C call chain, right under the nose of compiler and
hope it won't fall apart horribly. What had been actually done is only slightly
less insane - an inline asm in mangle_kernel_stack() moved the stuff around,
then reset stack pointer and jumped to label in asm glue.
However, we can avoid all that mess if the asm wrapper we have to use anyway
would reserve some space on the stack between switch_stack and the C stack
frame of do_{rt_,}sigreturn(). Then C part can simply memmove() pt_regs +
switch_stack, memcpy() the variable part of exception frame into the opened
gap - all of that without inline asm, buggering C call chain, magical jumps
to asm labels, etc.
Asm wrapper would need to know where the moved switch_stack has ended up -
it might have been shifted into the gap we'd reserved before do_rt_sigreturn()
call. That's where it needs to set the stack pointer to. So let the C part
return just that and be done with that.
While we are at it, the call of berr_040cleanup() we need to do when
returning via 68040 bus error exception frame can be moved into C part
as well.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/YP2dTQPm1wGPWFgD@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
We get there when sigreturn has performed obscene acts on kernel stack;
in particular, the location of pt_regs has shifted. We are about to call
syscall_trace(), which might stop for tracer. If that happens, we'd better
have task_pt_regs() returning correct result...
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: bd6f56a75b ("m68k: Missing syscall_trace() on sigreturn")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/YP2dMWeV1LkHiOpr@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
When we have several pending signals, have entered with the kernel
with large exception frame *and* have already built at least one
sigframe, regs->stkadj is going to be non-zero and regs->format/sr/pc
are going to be junk - the real values are in shifted exception stack
frame we'd built when putting together the first sigframe.
If that happens, subsequent sigframes are going to be garbage.
Not hard to fix - just need to find the "adjusted" frame first
and look for format/vector/sr/pc in it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/YP2dBIAPTaVvHiZ6@zeniv-ca.linux.org.uk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
If monitor interface is enabled in co-exist mode, only local traffic are
captured. It's caused by missing monitor vdev in co-exist mode. So,
monitor mode clean up is done with separate Monitor APIs. For this,
introduce flags monitor_started and monitor_vdev_created.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01725-QCAHKSWPL_SILICONZ-1
Co-developed-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Co-developed-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721162053.46290-4-jouni@codeaurora.org
Add separate APIs for monitor_vdev_create/monitor_vdev_delete
and monitor_vdev_start/monitor_vdev_stop.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01725-QCAHKSWPL_SILICONZ-1
Co-developed-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Co-developed-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721162053.46290-3-jouni@codeaurora.org
This is to prepare for monitor mode clean up.
No functional changes are done.
Co-developed-by: Miles Hu <milehu@codeaurora.org>
Signed-off-by: Miles Hu <milehu@codeaurora.org>
Co-developed-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721162053.46290-2-jouni@codeaurora.org
NIC card saves calibrated TX power index in the efuse(ROM).
Driver loads TX power idex when interface is up.
The problem is type2/4 NICs loads 2.4G TX power index
from wrong position. This patch corrects the offsets.
So, driver loads real 2.4G TX power index for type 2/4 NICs.
2.4G performance increased when using correct TX power index.
Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210922023637.9357-2-pkshih@realtek.com
RFE type4 is a new NIC which has one RF antenna shares with BT.
RFE type4 HW is the same as RFE type2 but attaching antenna to
aux antenna connector.
RFE type2 attach antenna to main antenna connector.
Load the same parameter as RFE type2 when initializing NIC.
Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210922023637.9357-1-pkshih@realtek.com
Use devm_add_action_or_reset() instead of devm_add_action() to simplify
the error handling.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210922130002.586-1-caihuoqing@baidu.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Randconfig builds still show a failure for the ath5k driver,
similar to the one that was fixed for ath9k earlier:
WARNING: unmet direct dependencies detected for MAC80211_LEDS
Depends on [n]: NET [=y] && WIRELESS [=y] && MAC80211 [=y] && (LEDS_CLASS [=m]=y || LEDS_CLASS [=m]=MAC80211 [=y])
Selected by [m]:
- ATH5K [=m] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && (PCI [=y] || ATH25) && MAC80211 [=y]
net/mac80211/led.c: In function 'ieee80211_alloc_led_names':
net/mac80211/led.c:34:22: error: 'struct led_trigger' has no member named 'name'
34 | local->rx_led.name = kasprintf(GFP_KERNEL, "%srx",
| ^
Copying the same logic from my ath9k patch makes this one work
as well, stubbing out the calls to the LED subsystem.
Fixes: b64acb28da ("ath9k: fix build error with LEDS_CLASS=m")
Fixes: 72cdab8087 ("ath9k: Do not select MAC80211_LEDS by default")
Fixes: 3a078876ca ("ath5k: convert LED code to use mac80211 triggers")
Link: https://lore.kernel.org/all/20210722105501.1000781-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210920122359.353810-1-arnd@kernel.org
In function ieee80211_prep_channel(), it has some ieee80211_bss_get_ie()
and cfg80211_find_ext_ie() to get the IE, this is to use another
function ieee802_11_parse_elems() to get all the IEs in one time.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Link: https://lore.kernel.org/r/20210924100052.32029-6-wgong@codeaurora.org
[remove now unnecessary size validation, use -ENOMEM, free elems earlier
for less error handling code]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Don't perform unaligned loads in __get_next() and __peek_nbyte_next() as
these are forms of undefined behavior:
"A pointer to an object or incomplete type may be converted to a pointer
to a different object or incomplete type. If the resulting pointer
is not correctly aligned for the pointed-to type, the behavior is
undefined."
(from http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf)
These problems were identified using the undefined behavior sanitizer
(ubsan) with the tools version of the code and perf test.
[ bp: Massage commit message. ]
Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lkml.kernel.org/r/20210923161843.751834-1-irogers@google.com
- Add missing FORCE target when building the EL2 object
- Fix a PMU probe regression on some platforms
-----BEGIN PGP SIGNATURE-----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=klvK
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
KVM/arm64 fixes for 5.15, take #1
- Add missing FORCE target when building the EL2 object
- Fix a PMU probe regression on some platforms
Mat Martineau says:
====================
mptcp: Bug fixes
This patch set includes two separate fixes for the net tree:
Patch 1 makes sure that MPTCP token searches are always limited to the
appropriate net namespace.
Patch 2 allows userspace to always change the backup settings for
configured endpoints even if those endpoints are not currently in use.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
current Linux refuses to change the 'backup' bit of MPTCP endpoints, i.e.
using MPTCP_PM_CMD_SET_FLAGS, unless it finds (at least) one subflow that
matches the endpoint address. There is no reason for that, so we can just
ignore the return value of mptcp_nl_addr_backup(). In this way, endpoints
can reconfigure their 'backup' flag even if no MPTCP sockets are open (or
more generally, in case the MP_PRIO message is not sent out).
Fixes: 0f9f696a50 ("mptcp: add set_flags command in PM netlink")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_token_get_sock() may return a mptcp socket that is in
a different net namespace than the socket that received the token value.
The mptcp syncookie code path had an explicit check for this,
this moves the test into mptcp_token_get_sock() function.
Eventually token.c should be converted to pernet storage, but
such change is not suitable for net tree.
Fixes: 2c5ebd001d ("mptcp: refactor token container")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the hci_uart_register_device() call is the last thing we do in
h5_serdev_probe() we can simply directly return its return-value.
Cc: Archie Pusaka <apusaka@google.com>
Suggested-by: Archie Pusaka <apusaka@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
We should always check if skb_header_pointer's return is NULL before
using it, otherwise it may cause null-ptr-deref, as syzbot reported:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:sctp_rcv_ootb net/sctp/input.c:705 [inline]
RIP: 0010:sctp_rcv+0x1d84/0x3220 net/sctp/input.c:196
Call Trace:
<IRQ>
sctp6_rcv+0x38/0x60 net/sctp/ipv6.c:1109
ip6_protocol_deliver_rcu+0x2e9/0x1ca0 net/ipv6/ip6_input.c:422
ip6_input_finish+0x62/0x170 net/ipv6/ip6_input.c:463
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ip6_input+0x9c/0xd0 net/ipv6/ip6_input.c:472
dst_input include/net/dst.h:460 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:76 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
ipv6_rcv+0x28c/0x3c0 net/ipv6/ip6_input.c:297
Fixes: 3acb50c18d ("sctp: delay as much as possible skb_linearize")
Reported-by: syzbot+581aff2ae6b860625116@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recently added H5_WAKEUP_DISABLE h5->flags flag gets checked in
h5_btrtl_open(), but it gets set in h5_serdev_probe() *after*
calling hci_uart_register_device() and thus after h5_btrtl_open()
is called, set this flag earlier.
Also on devices where suspend/resume involves fully re-probing the HCI,
runtime-pm suspend should not be used, make the runtime-pm setup
conditional on the H5_WAKEUP_DISABLE flag too.
This fixes the HCI being removed and then re-added every 10 seconds
because it was being reprobed as soon as it was runtime-suspended.
Fixes: 66f077dde7 ("Bluetooth: hci_h5: add WAKEUP_DISABLE flag")
Fixes: d9dd833cf6 ("Bluetooth: hci_h5: Add runtime suspend")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In hv_pci_bus_exit, the code is holding a spinlock while calling
pci_destroy_slot(), which takes a mutex.
This is not safe for spinlock. Fix this by moving the children to be
deleted to a list on the stack, and removing them after spinlock is
released.
Fixes: 94d2276320 ("PCI: hv: Fix a race condition when removing the device")
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: "Krzysztof Wilczyński" <kw@linux.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/linux-hyperv/20210823152130.GA21501@kili/
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1630365207-20616-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Ido Schimmel says:
====================
mlxsw: Add support for IP-in-IP with IPv6 underlay
Currently, mlxsw only supports IP-in-IP with IPv4 underlay. Traffic
routed through 'gre' netdevs is encapsulated with IPv4 and GRE headers.
Similarly, incoming IPv4 GRE packets are decapsulated and routed in the
overlay VRF (which can be the same as the underlay VRF).
This patchset adds support for IPv6 underlay using the 'ip6gre' netdev.
Due to architectural differences between Spectrum-1 and later ASICs,
this functionality is only supported on Spectrum-2 onwards (the software
data path is used for Spectrum-1).
Patchset overview:
Patches #1-#5 are preparations.
Patches #6-#9 add and extend required device registers.
Patches #10-#14 gradually add IPv6 underlay support.
A follow-up patchset will add net/forwarding/ selftests.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, mlxsw driver supports IP-in-IP only with IPv4 underlay.
Add support for IPv6 underlay for Spectrum-2 and above.
Most of the configurations are same to IPv4, the main difference between
IPv4 and IPv6 is related to saving IP addresses.
IPv6 addresses are saved as part of KVD and the relevant registers hold
pointer to them.
Add API for that as part of ipip_ops, so then only Spectrum-2 and above
will save IPv6 addresses in this way.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Spectrum ASIC has a configurable limit on how deep into the packet
it parses. By default, the limit is 96 bytes.
For IP-in-IP packets, with IPv6 outer and inner headers, the default
parsing depth is not enough and without increasing it such packets cannot
be properly decapsulated.
Use the existing API to set parsing depth, call it once for each
decapsulation entry when it is created/destroyed.
There is no need to protect the code with new mutex because 'router->lock'
is already taken in these code paths.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for allocating and freeing KVD entries for IPv6 addresses.
These addresses are programmed by the RIPS register and referenced by
the RATR and RTDP registers for IPv6 underlay encapsulation and
decapsulation, respectively.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add operations for IP-in-IP GRE6. For now the function can_offload()
returns false and the other functions warn as they should never be called.
A later patch will add dedicated operations for Spectrum-2 which will
support IPv6 underlay, so use 'mlxsw_sp1_' prefix for the new operations.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, there is support for IP-in-IP only with IPv4 underlay for all
supported Spectrum ASICs.
The next patches will add support for IPv6 underlay only for Spectrum-2
and above.
Add infrastructure for splitting IP-in-IP support between different
ASICs - create separate ipip_ops_arr and add ipips_init function to set the
right ops.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RITR register is used to configure the router interface table.
For IP-in-IP, it stores the underlay source IP address for encapsulation
and also the ingress RIF for the underlay lookup.
Add support for IPv6 IP-in-IP configuration.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RATR register is used to configure the Router Adjacency (next-hop)
Table.
For IP-in-IP entry, underlay destination IPv4 is saved as part of this
register and underlay destination IPv6 is saved by RIPS register and RATR
saves pointer to it.
Add function for setting IPv6 IP-in-IP configuration.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RTDP register is used for configuring the tunnel decapsulation
properties of NVE and IP-in-IP.
Linux tunnels verify packets before decapsulation based on the packet's
source IP, which must match tunnel remote IP.
RTDP is used to configure decapsulation so that it filters out packets that
are not IPv6 or have the wrong source IP or wrong GRE key.
For IP-in-IP entry, source IPv4 is saved as part of this register and
source IPv6 is saved by RIPS register and RTDP saves pointer to it.
Create common function for configuring both IPv4 and IPv6 and add
dedicated functions for each protocol.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RIPS register is used to store IPv6 addresses for use by the NVE and
IP-in-IP.
For IPv6 underlay support, RATR register needs to hold a pointer to the
remote IPv6 address for encapsulation and RTDP register needs to hold a
pointer to the local IPv6 address for decapsulation check.
Add the required register for saving IPv6 addresses.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function __mlxsw_sp_ipip_netdev_ul_dev_get() returns the underlay
device that corresponds to the overlay device that it gets.
Currently, this function assumes that the tunnel is IPv4 GRE, because it
is the only one that is supported by mlxsw driver.
This assumption will no longer be correct when IPv6 GRE support is added,
resulting in wrong underlay device being returned.
Instead, check 'ol_dev->type' and return the underlay device accordingly.
Move the function to spectrum_ipip.c because spectrum_router.c should not
be aware to tunnel type.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function mlxsw_sp_ipip_ol_netdev_change_gre4() contains code that
can be shared between IPv4 and IPv6.
The only difference is the way that arguments are taken from tunnel
parameters, which are different between IPv4 and IPv6.
For that, add structure 'mlxsw_sp_ipip_parms' to hold all the required
parameters for the function and save it as part of
'struct mlxsw_sp_ipip_entry' instead of the existing structure that is
not shared between IPv4 and IPv6. Add new operation as part of
'mlxsw_sp_ipip_ops' to initialize the new structure.
Then mlxsw_sp_ipip_ol_netdev_change_gre{4,6}() will prepare the new
structure and both will call the same function.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>