Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210907085158.4560-1-caihuoqing@baidu.com
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210907085151.4509-1-caihuoqing@baidu.com
Even though both the driver and the device trees all use the
allwinner,sun50i-h6-de3-clk, we documented the compatible as
allwinner,sun50i-h6-de2-clk in the binding. Let's fix this.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-10-maxime@cerno.tech
Some platforms have more than one CCU driver loaded: the main CCU, the
PRCM, the display engine, and possibly others. All of these hardware
blocks have separate MMIO spaces, so there is no need to synchronize
between them.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901050526.45673-4-samuel@sholland.org
The CCU drivers are not really designed to be unbound. Unbinding a SoC's
main CCU is especially pointless, as very few of the peripherals on the
SoC will work without it. Let's avoid any potential problems by removing
the bind/unbind attributes from sysfs for these drivers.
This change is not applied to the "secondary" CCUs (DE, USB) as those
could reasonably be unbound without making the system useless.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901050526.45673-3-samuel@sholland.org
Currently, unbinding a CCU driver unmaps the device's MMIO region, while
leaving its clocks/resets and their providers registered. This can cause
a page fault later when some clock operation tries to perform MMIO. Fix
this by separating the CCU initialization from the memory allocation,
and then using a devres callback to unregister the clocks and resets.
This also fixes a memory leak of the `struct ccu_reset`, and uses the
correct owner (the specific platform driver) for the clocks and resets.
Early OF clock providers are never unregistered, and limited error
handling is possible, so they are mostly unchanged. The error reporting
is made more consistent by moving the message inside of_sunxi_ccu_probe.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210901050526.45673-2-samuel@sholland.org
The CCUs for all other 32-bit SoCs have a dependency on a specific
MACH_SUNxI symbol. This effectively hides these drivers when building
an ARCH=arm64 kernel. However, the A83T CCU still shows up because it
is missing this dependency. Let's add it for consistency.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210902230200.29574-1-samuel@sholland.org
The driver uses 'reg' from 'struct ccu_common' everywhere, so this
duplicate field is unused and unnecessary. Remove it.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210902230336.29745-1-samuel@sholland.org
Remove is-dual not documented property and also update comment about QSPI
sizes to reflect dual configuration as 16MB + 16MB.
Only single configuration is supported now.
Reported-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/876c53b92f99623bae45d5c0c5ae79ee3e24f745.1628239345.git.michal.simek@xilinx.com
zcu102 rev1.1 compare to rev1.0 is using by default different DDR memory
which requires different configuration. The reason for adding this file to
Linux kernel is that U-Boot fdtfile variable is composed based on board
revision (in eeprom) and dtb file should exist in standard distibutions for
passing it to Linux kernel.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/38bbbeb885f4d9ba466c43ab9b4d25190a3552fb.1623684253.git.michal.simek@xilinx.com
As per the design specification
"The 16-bit Seconds Calibration Value represents the number of
Oscillator Ticks that are required to measure the largest time
period that is less than or equal to 1 second.
For an oscillator that is 32.768 KHz, this value will be 0x7FFF."
Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/0d36d9fe999ff82f10d42ab5fc0d1e907c26ac34.1623684253.git.michal.simek@xilinx.com
This patch adds reset-on-timeout to FPD WDT which will trigger an
interrupt to PMU when watchdog expiry happens and PMU takes the
necessary action. If this property is not enabled, reason will not be
known when watchdog expiry happens.
This patch also modifies the default timeout to 60 seconds. Reason is
that if u-boot enables WDT, it will set the timeout to 10 seconds and
this is not enough to boot till Linux and start the WDT application in
Linux. 60 seconds is the maximum safest value to boot till Linux and
start the WDT application.
Users need to change this timeout value to fit their needs.
Signed-off-by: Mounika Grace Akula <mounika.grace.akula@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/5848a81447921240fddfe2f5749ae0746fcbbdbd.1623684253.git.michal.simek@xilinx.com
In kernel 5.4, support has been added for reading MTD devices via the nvmem
API.
For this the mtd devices are registered as read-only NVMEM providers under
sysfs with the same name as the flash partition label property.
So if flash partition label property of multiple flash devices are
identical then the second mtd device fails to get registered as a NVMEM
provider.
This patch fixes the issue by having different label property for different
flashes.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/6c4b9b9232b93d9e316a63c086540fd5bf6b8687.1623684253.git.michal.simek@xilinx.com
After the removal of some pointers from struct hal_ops the function
rtl8188e_set_hal_ops() is empty now. Remove it.
Acked-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210910205033.3778-8-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove write_rfreg from struct hal_ops and its wrapper
rtw_hal_write_rfreg(). Call rtl8188e_PHY_SetRFReg() directly instead.
Acked-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210910205033.3778-7-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove read_rfreg from struct hal_ops and its wrapper
rtw_hal_read_rfreg(). Call rtl8188e_PHY_QueryRFReg() directly instead.
Acked-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210910205033.3778-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove write_bbreg from struct hal_ops and its wrapper
rtw_hal_write_bbreg(). Call rtl8188e_PHY_SetBBReg() directly instead.
Acked-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210910205033.3778-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove read_bbreg from struct hal_ops and its wrapper
rtw_hal_read_bbreg(). Call rtl8188e_PHY_QueryBBReg() directly instead.
Acked-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210910205033.3778-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove hal_xmit from struct hal_ops and its wrapper rtw_hal_xmit().
Call rtl8188eu_hal_xmit() directly instead.
Acked-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20210910205033.3778-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>