API for individual devices to register with the syscfg management
system is added.
Devices register with matching information, and any features or
configurations that match will be loaded into the device.
The feature and configuration loading is extended so that on load these
are loaded into any currently registered devices. This allows
configuration loading after devices have been registered.
Link: https://lore.kernel.org/r/20210723165444.1048-3-mike.leach@linaro.org
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210818194022.379573-3-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Creates an system management API to allow complex configurations and
features to be programmed into a CoreSight infrastructure.
A feature is defined as a programming set for a device or class of
devices.
A configuration is a set of features across the system that are enabled
for a trace session.
The API will manage system wide configuration, and allow complex
programmed features to be added to individual device instances, and
provide for system wide configuration selection on trace capture
operations.
This patch creates the initial data object and the initial API for
loading configurations and features.
Link: https://lore.kernel.org/r/20210723165444.1048-2-mike.leach@linaro.org
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210818194022.379573-2-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Once __alloc_size hints have been added, the compiler will (correctly!)
see this as an overflow. We are, however, trying to test for this
condition at run-time (not compile-time), so work around it with a
volatile int offset.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210818174855.2307828-5-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In an effort to keep as much information in once place as possible in
CI logs, report the kernel version and architecture in the failure hints.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: kernelci@groups.io
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210818174855.2307828-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The FORTIFY_SOURCE tests were split between bugs.c and fortify.c. Move
tests into fortify.c, standardize their naming, add CONFIG hints, and
add them to the lkdtm selftests.
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210818174855.2307828-3-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add CONFIG hints about why the ARRAY_BOUNDS test might fail, and
similarly include the CONFIGs needed to pass the ARRAY_BOUNDS test via
the selftests, and add to selftests.
Cc: kernelci@groups.io
Suggested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210818174855.2307828-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor struct ehci_regs to avoid accessing beyond the end of
port_status. This change results in no difference in the final
object code.
Avoids several warnings when building with -Warray-bounds:
drivers/usb/host/ehci-brcm.c: In function 'ehci_brcm_reset':
drivers/usb/host/ehci-brcm.c:113:32: warning: array subscript 16 is above array bounds of 'u32[15]' {aka 'unsigned int[15]'} [-Warray-bounds]
113 | ehci_writel(ehci, 0x00800040, &ehci->regs->port_status[0x10]);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/usb/host/ehci.h:274,
from drivers/usb/host/ehci-brcm.c:15:
./include/linux/usb/ehci_def.h:132:7: note: while referencing 'port_status'
132 | u32 port_status[HCS_N_PORTS_MAX];
| ^~~~~~~~~~~
Note that the documentation around this proprietary register was
confusing. If "USB_EHCI_INSNREG00" is at port_status[0x0f], its offset
would be 0x80 (not 0x90). The comments have been adjusted to fix this
apparent typo.
Fixes: 9df231511b ("usb: ehci: Add new EHCI driver for Broadcom STB SoC's")
Cc: Al Cooper <alcooperx@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210818173018.2259231-3-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Overlayfs does not cache ACL's (to avoid double caching). Instead it just
calls the underlying filesystem's i_op->get_acl(), which will return the
cached value, if possible.
In rcu path walk, however, get_cached_acl_rcu() is employed to get the
value from the cache, which will fail on overlayfs resulting in dropping
out of rcu walk mode. This can result in a big performance hit in certain
situations.
Fix by calling ->get_acl() with rcu=true in case of ACL_DONT_CACHE (which
indicates pass-through)
Reported-by: garyhuang <zjh.20052005@163.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Add a rcu argument to the ->get_acl() callback to allow
get_cached_acl_rcu() to call the ->get_acl() method in the next patch.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
- Tree-wide conversion to generic_handle_domain_irq()
- irqdomain documentation update
Drag the pinctl ib-rockchip branch to resolve conflicts.
* irq/generic_handle_domain_irq:
pinctrl/rockchip: drop the gpio related codes
gpio/rockchip: drop irq_gc_lock/irq_gc_unlock for irq set type
gpio/rockchip: support next version gpio controller
gpio/rockchip: use struct rockchip_gpio_regs for gpio controller
gpio/rockchip: add driver for rockchip gpio
dt-bindings: gpio: change items restriction of clock for rockchip,gpio-bank
pinctrl/rockchip: add pinctrl device to gpio bank struct
pinctrl/rockchip: separate struct rockchip_pin_bank to a head file
pinctrl/rockchip: always enable clock for gpio controller
Signed-off-by: Marc Zyngier <maz@kernel.org>
When the max pages (last_page in the swap header + 1) is smaller than
the total pages (inode size) of the swapfile, iomap_swapfile_activate
overwrites sis->max with total pages.
However, frontswap_map is a swap page state bitmap allocated using the
initial sis->max page count read from the swap header. If swapfile
activation increases sis->max, it's possible for the frontswap code to
walk off the end of the bitmap, thereby corrupting kernel memory.
[djwong: modify the description a bit; the original paragraph reads:
"However, frontswap_map is allocated using max pages. When test and clear
the sis offset, which is larger than max pages, of frontswap_map in
__frontswap_invalidate_page(), neighbors of frontswap_map may be
overwritten, i.e., slab is polluted."
Note also that this bug resulted in a behavioral change: activating a
swap file that was formatted and later extended results in all pages
being activated, not the number of pages recorded in the swap header.]
This fixes the issue by considering the limitation of max pages of swap
info in iomap_swapfile_add_extent().
To reproduce the case, compile kernel with slub RED ZONE, then run test:
$ sudo stress-ng -a 1 -x softlockup,resources -t 72h --metrics --times \
--verify -v -Y /root/tmpdir/stress-ng/stress-statistic-12.yaml \
--log-file /root/tmpdir/stress-ng/stress-logfile-12.txt \
--temp-path /root/tmpdir/stress-ng/
We'll get the error log as below:
[ 1151.015141] =============================================================================
[ 1151.016489] BUG kmalloc-16 (Not tainted): Right Redzone overwritten
[ 1151.017486] -----------------------------------------------------------------------------
[ 1151.017486]
[ 1151.018997] Disabling lock debugging due to kernel taint
[ 1151.019873] INFO: 0x0000000084e43932-0x0000000098d17cae @offset=7392. First byte 0x0 instead of 0xcc
[ 1151.021303] INFO: Allocated in __do_sys_swapon+0xcf6/0x1170 age=43417 cpu=9 pid=3816
[ 1151.022538] __slab_alloc+0xe/0x20
[ 1151.023069] __kmalloc_node+0xfd/0x4b0
[ 1151.023704] __do_sys_swapon+0xcf6/0x1170
[ 1151.024346] do_syscall_64+0x33/0x40
[ 1151.024925] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1151.025749] INFO: Freed in put_cred_rcu+0xa1/0xc0 age=43424 cpu=3 pid=2041
[ 1151.026889] kfree+0x276/0x2b0
[ 1151.027405] put_cred_rcu+0xa1/0xc0
[ 1151.027949] rcu_do_batch+0x17d/0x410
[ 1151.028566] rcu_core+0x14e/0x2b0
[ 1151.029084] __do_softirq+0x101/0x29e
[ 1151.029645] asm_call_irq_on_stack+0x12/0x20
[ 1151.030381] do_softirq_own_stack+0x37/0x40
[ 1151.031037] do_softirq.part.15+0x2b/0x30
[ 1151.031710] __local_bh_enable_ip+0x4b/0x50
[ 1151.032412] copy_fpstate_to_sigframe+0x111/0x360
[ 1151.033197] __setup_rt_frame+0xce/0x480
[ 1151.033809] arch_do_signal+0x1a3/0x250
[ 1151.034463] exit_to_user_mode_prepare+0xcf/0x110
[ 1151.035242] syscall_exit_to_user_mode+0x27/0x190
[ 1151.035970] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1151.036795] INFO: Slab 0x000000003b9de4dc objects=44 used=9 fp=0x00000000539e349e flags=0xfffffc0010201
[ 1151.038323] INFO: Object 0x000000004855ba01 @offset=7376 fp=0x0000000000000000
[ 1151.038323]
[ 1151.039683] Redzone 000000008d0afd3d: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
[ 1151.041180] Object 000000004855ba01: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
[ 1151.042714] Redzone 0000000084e43932: 00 00 00 c0 cc cc cc cc ........
[ 1151.044120] Padding 000000000864c042: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
[ 1151.045615] CPU: 5 PID: 3816 Comm: stress-ng Tainted: G B 5.10.50+ #7
[ 1151.046846] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[ 1151.048633] Call Trace:
[ 1151.049072] dump_stack+0x57/0x6a
[ 1151.049585] check_bytes_and_report+0xed/0x110
[ 1151.050320] check_object+0x1eb/0x290
[ 1151.050924] ? __x64_sys_swapoff+0x39a/0x540
[ 1151.051646] free_debug_processing+0x151/0x350
[ 1151.052333] __slab_free+0x21a/0x3a0
[ 1151.052938] ? _cond_resched+0x2d/0x40
[ 1151.053529] ? __vunmap+0x1de/0x220
[ 1151.054139] ? __x64_sys_swapoff+0x39a/0x540
[ 1151.054796] ? kfree+0x276/0x2b0
[ 1151.055307] kfree+0x276/0x2b0
[ 1151.055832] __x64_sys_swapoff+0x39a/0x540
[ 1151.056466] do_syscall_64+0x33/0x40
[ 1151.057084] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1151.057866] RIP: 0033:0x150340b0ffb7
[ 1151.058481] Code: Unable to access opcode bytes at RIP 0x150340b0ff8d.
[ 1151.059537] RSP: 002b:00007fff7f4ee238 EFLAGS: 00000246 ORIG_RAX: 00000000000000a8
[ 1151.060768] RAX: ffffffffffffffda RBX: 00007fff7f4ee66c RCX: 0000150340b0ffb7
[ 1151.061904] RDX: 000000000000000a RSI: 0000000000018094 RDI: 00007fff7f4ee860
[ 1151.063033] RBP: 00007fff7f4ef980 R08: 0000000000000000 R09: 0000150340a672bd
[ 1151.064135] R10: 00007fff7f4edca0 R11: 0000000000000246 R12: 0000000000018094
[ 1151.065253] R13: 0000000000000005 R14: 000000000160d930 R15: 00007fff7f4ee66c
[ 1151.066413] FIX kmalloc-16: Restoring 0x0000000084e43932-0x0000000098d17cae=0xcc
[ 1151.066413]
[ 1151.067890] FIX kmalloc-16: Object at 0x000000004855ba01 not freed
Fixes: 67482129cd ("iomap: add a swapfile activation function")
Fixes: a45c0eccc5 ("iomap: move the swapfile code into a separate file")
Signed-off-by: Gang Deng <gavin.dg@linux.alibaba.com>
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The 'contains' keyword applies to elements within an array, so
using 'items' only makes sense if the elements of the array are another
array which is not the case for 'compatible' properties.
Looking at the driver, it seems the intent was the condition should be
true when 'faraday,ftpci100' is present, so we can drop
'cortina,gemini-pci'.
Fixes: 2720b99133 ("dt-bindings: PCI: ftpci100: convert faraday,ftpci100 to YAML")
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210817174743.541353-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Synopsys IntelliDDR Multi Protocol memory controller (present in
Xilinx Zynq and ZynqMP) bindings to DT schema format using json-schema.
New binding contains copied parts of description from previous binding
document, therefore the license is set as GPL-2.0-only.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210818113139.84869-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert Broadcom DDR PHY Front End (DPFE) bindings to DT schema format
using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Markus Mayer <mmayer@broadcom.com>
Link: https://lore.kernel.org/r/20210817080617.14503-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
-----BEGIN PGP SIGNATURE-----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=aR16
-----END PGP SIGNATURE-----
Merge tag 'for-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix for cross-rename, adding a missing check for directory
and subvolume, this could lead to a crash"
* tag 'for-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: prevent rename2 from exchanging a subvol with a directory from different parents
Hopefully the last PR for 5.14: here includes only a few regression
fixes and trivial device quirks.
-----BEGIN PGP SIGNATURE-----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=ZKV7
-----END PGP SIGNATURE-----
Merge tag 'sound-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only a few regression fixes and trivial device quirks"
* tag 'sound-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/via: Apply runtime PM workaround for ASUS B23E
ALSA: hda: Fix hang during shutdown due to link reset
ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9510 laptop
ALSA: oxfw: fix functioal regression for silence in Apogee Duet FireWire
ALSA: hda - fix the 'Capture Switch' value change notifications
During the sp_tx_edid_read() call the return value of sp_tx_edid_read()
is ignored, which could cause potential errors to go unhandled.
All errors which are returned by sp_tx_edid_read() are handled in
anx7625_get_edid().
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818171318.1848272-2-robert.foss@linaro.org
The return value of sp_tx_rst_aux() is not propagated, which means
both compiler warnings and potential errors not being handled.
Fixes: 8bdfc5dae4 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210818171318.1848272-1-robert.foss@linaro.org
The variable delta is not initialized and this will cause unexpected
behaviour with the comparison of tmpdelta < delta. Fix this by setting
it to 0xffffffff. This matches the behaviour as in the similar function
mgag200_pixpll_compute_g200se_04.
v2:
* move fix up by one line to align style with other functions
* add additional tags from similar patch
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Fixes: 2545ac9603 ("drm/mgag200: Abstract pixel PLL via struct mgag200_pll")
Addresses-Coverity: ("Uninitialized scalar variable")
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210817163204.494166-1-colin.king@canonical.com
I had forgotten just how sensitive hackbench is to extra pipe wakeups,
and commit 3a34b13a88 ("pipe: make pipe writes always wake up
readers") ended up causing a quite noticeable regression on larger
machines.
Now, hackbench isn't necessarily a hugely meaningful benchmark, and it's
not clear that this matters in real life all that much, but as Mel
points out, it's used often enough when comparing kernels and so the
performance regression shows up like a sore thumb.
It's easy enough to fix at least for the common cases where pipes are
used purely for data transfer, and you never have any exciting poll
usage at all. So set a special 'poll_usage' flag when there is polling
activity, and make the ugly "EPOLLET has crazy legacy expectations"
semantics explicit to only that case.
I would love to limit it to just the broken EPOLLET case, but the pipe
code can't see the difference between epoll and regular select/poll, so
any non-read/write waiting will trigger the extra wakeup behavior. That
is sufficient for at least the hackbench case.
Apart from making the odd extra wakeup cases more explicitly about
EPOLLET, this also makes the extra wakeup be at the _end_ of the pipe
write, not at the first write chunk. That is actually much saner
semantics (as much as you can call any of the legacy edge-triggered
expectations for EPOLLET "sane") since it means that you know the wakeup
will happen once the write is done, rather than possibly in the middle
of one.
[ For stable people: I'm putting a "Fixes" tag on this, but I leave it
up to you to decide whether you actually want to backport it or not.
It likely has no impact outside of synthetic benchmarks - Linus ]
Link: https://lore.kernel.org/lkml/20210802024945.GA8372@xsang-OptiPlex-9020/
Fixes: 3a34b13a88 ("pipe: make pipe writes always wake up readers")
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Sandeep Patil <sspatil@android.com>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently have two code paths for broadcast packets:
A) self-generated, via batadv_interface_tx()->
batadv_send_bcast_packet().
B) received/forwarded, via batadv_recv_bcast_packet()->
batadv_forw_bcast_packet().
For A), self-generated broadcast packets:
The only modifications to the skb data is the ethernet header which is
added/pushed to the skb in
batadv_send_broadcast_skb()->batadv_send_skb_packet(). However before
doing so, batadv_skb_head_push() is called which calls skb_cow_head() to
unshare the space for the to be pushed ethernet header. So for this
case, it is safe to use skb clones.
For B), received/forwarded packets:
The same applies as in A) for the to be forwarded packets. Only the
ethernet header is added. However after (queueing for) forwarding the
packet in batadv_recv_bcast_packet()->batadv_forw_bcast_packet(), a
packet is additionally decapsulated and is sent up the stack through
batadv_recv_bcast_packet()->batadv_interface_rx().
Protocols higher up the stack are already required to check if the
packet is shared and create a copy for further modifications. When the
next (protocol) layer works correctly, it cannot happen that it tries to
operate on the data behind the skb clone which is still queued up for
forwarding.
Co-authored-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Previously, there is no need to get the full decompressed length since
EROFS supports partial decompression. However for some other cases
such as fiemap, the full decompressed length is necessary for iomap to
make it work properly.
This patch adds a way to get the full decompressed length. Note that
it takes more metadata overhead and it'd be avoided if possible in the
performance sensitive scenario.
Link: https://lore.kernel.org/r/20210818152231.243691-1-hsiangkao@linux.alibaba.com
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
After DPRX link training, intel_dp_link_train_phy() did not
return the training result properly. If link training failed,
i915 driver would not run into link train fallback function.
And no hotplug uevent would be received by user space application.
Fixes: b30edfd8d0 ("drm/i915: Switch to LTTPR non-transparent mode link training")
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210706152541.25021-1-shawn.c.lee@intel.com
This patch renames a documentation libbpf.rst to index.rst. In order
for readthedocs.org to pick this file up and properly build the
documentation site.
It also changes the title type of the ABI subsection in the
naming convention doc. This is so that readthedocs.org doesn't treat this
section as a separate document.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210818151313.49992-1-grantseltzer@gmail.com
If IRQ occurs between calling request_irq() and mv_u3d_eps_init(),
then null pointer dereference occurs since u3d->eps[] wasn't
initialized yet but used in mv_u3d_nuke().
The patch puts registration of the interrupt handler after
initializing of neccesery data.
Found by Linux Driver Verification project (linuxtesting.org).
Fixes: 90fccb529d ("usb: gadget: Gadget directory cleanup - group UDC drivers")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210818141247.4794-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a new helper to initialize the global coherent pool. This both
cleans up the existing initialization which indirects through the
reserved_mem_ops that are normally only used for struct device, and
also allows using the global pool for non-devicetree architectures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dillon Min <dillon.minfei@gmail.com>
Return the allocated dma_coherent_mem structure, set the
use_dma_pfn_offset and print the failure warning inside of
dma_init_coherent_memory instead of leaving that to the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dillon Min <dillon.minfei@gmail.com>
Switch an ifdef so that the global coherent pool is initialized for
any architecture that selects the DMA_GLOBAL_POOL symbol insted of
hardcoding ARM.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dillon Min <dillon.minfei@gmail.com>
Select the right options to just use the generic dma-direct code
instead of reimplementing it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dillon Min <dillon.minfei@gmail.com>
Add an option to allocate uncached memory for dma_alloc_coherent from
the global dma_coherent_default_memory. This will allow to move
arm-nommu (and eventually other platforms) to use generic code for
allocating uncached memory from a pre-populated pool.
Note that this is a different pool from the one that platforms that
can remap at runtime use for GFP_ATOMIC allocations for now, although
there might be opportunities to eventually end up with a common codebase
for the two use cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Dillon Min <dillon.minfei@gmail.com>
Taken from the cover letter "IMA: restrict the accepted digest
algorithms for the security.ima xattr":
Provide users the ability to restrict the algorithms accepted by
their system, both when writing/updating xattrs, and when appraising
files, while retaining a permissive behavior by default to preserve
backward compatibility.
To provide these features, alter the behavior of setxattr to
only accept hashes built in the kernel, instead of any hash listed
in the kernel (complete list crypto/hash_info.c). In addition, the
user can define in his IMA policy the list of digest algorithms
allowed for writing to the security.ima xattr. In that case,
only algorithms present in that list are accepted for writing.
In addition, users may opt-in to allowlist hash algorithms for
appraising thanks to the new 'appraise_algos' IMA policy option.
By default IMA will keep accepting any hash algorithm, but specifying
that option will make appraisal of files hashed with another algorithm
fail.
Link: https://lore.kernel.org/linux-integrity/20210816081056.24530-1-Simon.THOBY@viveris.fr/
There are no more users for it. The last place where it's
called is in platform_device_register_full(). Replacing that
call with device_create_managed_software_node() and
removing the function.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210817102449.39994-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The old device property API is going to be removed.
Replacing the device_add_properties() call with the software
node API equivalent, device_create_managed_software_node().
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210817102449.39994-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There have a corner case that tx DMA .callback() is coming after
.flush_buffer(), then .callback() should check dma_tx_in_progress
flag and return in directly.
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20210817100203.21300-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the normal and error handling
paths.
Fixes: 4e3d60656a ("ARM: bcm2835: Add the Raspberry Pi firmware driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5e17e5409b934cd08bf6f9279c73be5c1cb11cce.1628232242.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit a20dcf53ea ("usb: typec: tcpm: Respond Not_Supported if no
snk_vdo"), stops tcpm_pd_data_request() calling tcpm_handle_vdm_request()
when port->nr_snk_vdo is not set. But the VDM might be intended for an
altmode-driver, in which case nr_snk_vdo does not matter.
This change breaks the forwarding of connector hotplug (HPD) events
for displayport altmode on devices which don't set nr_snk_vdo.
tcpm_pd_data_request() is the only caller of tcpm_handle_vdm_request(),
so we can move the nr_snk_vdo check to inside it, at which point we
have already looked up the altmode device so we can check for this too.
Doing this check here also ensures that vdm_state gets set to
VDM_STATE_DONE if it was VDM_STATE_BUSY, even if we end up with
responding with PD_MSG_CTRL_NOT_SUPP later.
Note that tcpm_handle_vdm_request() was already sending
PD_MSG_CTRL_NOT_SUPP in some circumstances, after moving the nr_snk_vdo
check the same error-path is now taken when that check fails. So that
we have only one error-path for this and not two. Replace the
tcpm_queue_message(PD_MSG_CTRL_NOT_SUPP) used by the existing error-path
with the more robust tcpm_pd_handle_msg() from the (now removed) second
error-path.
Fixes: a20dcf53ea ("usb: typec: tcpm: Respond Not_Supported if no snk_vdo")
Cc: stable <stable@vger.kernel.org>
Cc: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Kyle Tso <kyletso@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210816154632.381968-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Compiling ppc64le_defconfig with clang-14 shows a modpost warning:
WARNING: modpost: vmlinux.o(.text+0xa74e0): Section mismatch in
reference from the function xive_setup_cpu_ipi() to the function
.init.text:xive_request_ipi()
The function xive_setup_cpu_ipi() references
the function __init xive_request_ipi().
This is often because xive_setup_cpu_ipi lacks a __init
annotation or the annotation of xive_request_ipi is wrong.
xive_request_ipi() is called from xive_setup_cpu_ipi(), which is not
__init, so xive_request_ipi() should not be marked __init. Remove the
attribute so there is no more warning.
Fixes: cbc06f051c ("powerpc/xive: Do not skip CPU-less nodes when creating the IPIs")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210816185711.21563-1-nathan@kernel.org