The kbuild test robot detected this by 'make versioncheck'.
Fixes: 2df8220cc5 ("kbuild: build init/built-in.a just once")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 8d613a1d04 ("kbuild: drop $(objtree)/ prefix support
for clean-files") dropped support for prefixing with $(objtree).
Thus update the documentation to match that change.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In the SC8280XP platform there are two identical MDSS instances, each
with the same set of DisplayPort instances, at different addresses.
By not relying on the index to define the instance id it's possible to
describe them both in the same table and hence have a single compatible.
While at it, flatten the cfg/desc structure so that the match data is
just an array of descs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/514397/
Link: https://lore.kernel.org/r/20221207220012.16529-6-quic_bjorande@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.
Signed-off-by: Fabien Poussin <fabien.poussin@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221231231429.18357-7-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221231231429.18357-6-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Some SoCs in the D1 family feature ARM CPUs instead of a RISC-V CPU.
In that case, the CPUs are driven from the 'cpux' clock, so it needs
to be marked as critical, since there is no consumer when DVFS is
disabled. This matches the drivers for other SoCs, and the "riscv"
clock in this driver.
Signed-off-by: András Szemző <szemzo.andras@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-5-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Allwinner released some 32-bit ARM (sun8i) SoCs which use the same CCU
as D1. Allow them to reuse the driver.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-4-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Do not duplicate the same expression on the `default` line, so the two
lines do not need to be kept in sync. Drivers stay disabled under
COMPILE_TEST because of the `default ARCH_SUNXI` applied to SUNXI_CCU.
Three drivers had no conditions.
- SUN6I_RTC_CCU and SUN8I_DE2_CCU are used on current hardware
regardless of CPU architecture.
- SUN8I_R_CCU is only used on pre-H6 SoCs, which means no RISCV SoCs.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-3-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
SUNXI_CCU already depends on ARCH_SUNXI, so adding the dependency to
individual SoC drivers is redundant. Drivers stay disabled under
COMPILE_TEST because of the `default ARCH_SUNXI` applied to SUNXI_CCU.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20221231231429.18357-2-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The ccu_*_find_best() functions already compute a best_rate at the same
time as the other factors. Return this value so the caller does not need
to duplicate the computation.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20221231173055.42384-1-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The DRAM controller clock is only allowed to change frequency while the
DRAM chips are in self-refresh. To support this, changes to the CLK_DRAM
mux and divider have no effect until acknowledged by the memory dynamic
frequency scaling (MDFS) hardware inside the DRAM controller. (There is
a SDRCLK_UPD bit in DRAM_CFG_REG which should serve a similar purpose,
but this bit actually does nothing.)
However, the MDFS hardware in H3 appears to be broken. Triggering a
frequency change using the procedure from similar SoCs (A64/H5) hangs
the hardware. Additionally, the vendor BSP specifically avoids using the
MDFS hardware on H3, instead performing all DRAM PHY parameter updates
and resets in software.
Thus, it is effectively impossible to change the CLK_DRAM mux/divider,
so those features should not be modeled. Add CLK_SET_RATE_PARENT so
frequency changes apply to PLL_DDR instead.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221229042230.24532-1-samuel@sholland.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The sunxi_rsb_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
the sunxi_rsb_bus is not unregistered.
Fix by unregister sunxi_rsb_bus when platform_driver_register() failed.
Fixes: d787dcdb9c ("bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221123094200.12036-1-yuancan@huawei.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Use '-' to separate the function name and its description.
Use '%' on constants in kernel-doc notation.
Use the kernel-doc Return: format for function return values.
Fixes this warning:
ccu_mmc_timing.c:21: warning: No description found for return value of 'sunxi_ccu_set_mmc_timing_mode'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-sunxi@lists.linux.dev
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20221122184844.6794-1-rdunlap@infradead.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The mask only describes the `irq_idx % 32` part, making it generally
impossible to deduce what interrupt is being enabled/disabled. Since
`debug/core_irq` in debugfs (and other prints) also include the full
`DPU_IRQ_IDX()` value, print the same full value here for easier
correlation instead of only adding the `irq_idx / 32` part.
Furthermore, make the dbgstr messages more consistent.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/512460/
Link: https://lore.kernel.org/r/20221121222456.437815-1-marijn.suijten@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Because of the possilble failure of devm_kzalloc(), dpu_wb_conn might
be NULL and will cause null pointer dereference later.
Therefore, it might be better to check it and directly return -ENOMEM.
Fixes: 77b001acdc ("drm/msm/dpu: add the writeback connector layer")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/512277/
Link: https://lore.kernel.org/r/20221119055518.179937-1-tanghui20@huawei.com
[DB: fixed typo in commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
SDM845 only has INTF0-3 and has no business caring about the INTF4 irq.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/510463/
Link: https://lore.kernel.org/r/20221107103739.8993-1-konrad.dybcio@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
- Remove some incorrect assertions.
- Fix compiler warnings about variables that could be static.
- Fix an off by one error when computing the maximum btree height that
can cause repair failures.
- Fix the bulkstat-single ioctl not returning the root inode when asked
to do that.
- Convey NOFS state to inodegc workers to avoid recursion in reclaim.
- Fix unnecessary variable initializations.
- Fix a bug that could result in corruption of the busy extent tree.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tWyP
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.2-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Remove some incorrect assertions
- Fix compiler warnings about variables that could be static
- Fix an off by one error when computing the maximum btree height that
can cause repair failures
- Fix the bulkstat-single ioctl not returning the root inode when asked
to do that
- Convey NOFS state to inodegc workers to avoid recursion in reclaim
- Fix unnecessary variable initializations
- Fix a bug that could result in corruption of the busy extent tree
* tag 'xfs-6.2-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix extent busy updating
xfs: xfs_qm: remove unnecessary ‘0’ values from error
xfs: Fix deadlock on xfs_inodegc_worker
xfs: get root inode correctly at bulkstat
xfs: fix off-by-one error in xfs_btree_space_to_height
xfs: make xfs_iomap_page_ops static
xfs: don't assert if cmap covers imap after cycling lock
We have two types of task_work based creation, one is using an existing
worker to setup a new one (eg when going to sleep and we have no free
workers), and the other is allocating a new worker. Only the latter
should be freed when we cancel task_work creation for a new worker.
Fixes: af82425c6a ("io_uring/io-wq: free worker if task_work creation is canceled")
Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.
One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages
Fixes: 3a80a7fa79 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
When sequence replay is enabled for media clock recovery, current
implementation refers to cache of sequence descriptors in tx packets, then
fulfil sequence descriptors for rx packets. The initialization for rx
packets is done before starting packet streaming, while it can be postponed
till the cache has enough entries for the replay.
This commit refactors for the purpose as well as minor code change for
renaming of structure member.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When sequence replay is enabled for media clock recovery, current
implementation caches sequence descriptors from packet descriptors in tx
packets. Helper function for the purpose do not necessarily have good
readability.
This commit refactors relevant functions by renaming structure members,
function name, and function local variables.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When scheduling transmission of rx packets, current implementation
fulfils packet descriptors after pooling sequence descriptors. It is for
packet queueing. Besides the implementations do not necessarily have
good readability.
This commit refactors them by adding function local variables and
function arguments.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When scheduling transmission of rx packets, current implementation pools
sequence descriptors at first for media clock. Two methods are used for
the purpose depending on four cases, while the implementations do not
necessarily have good readability.
This commit refactors them by adding function pointers and functions
arguments.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230107023214.29132-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
- Three fixes for various bogosity in our linker script, revealed by the recent commit
which changed discard behaviour with some toolchains.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmO6jPgTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgCF9D/470zmPnFsEbiMAq+rNCF3xF5kbWhrg
z/SSaVVC00F6VmHguV6tEbur92j08XFlFE9JGZ3Gj2VW/w79q7Ix6HIBApHsqbOK
7o6cojDF9KxsBNZf+eAAteFdUdFZC8gg1VX6rIc6xf7Ju9DA1ZaiRqGO+DFnRXSk
tWngp2otZoUSLpWT9tGkwKHRw+jqtT/2baKG8PPBIBzKEbOEzBOxtraWdv5urm9B
fTVolMkr/Nk2UuqpMHd+CutP09sQdmMburZWzaxoZ0crB824YoJjMQGEZdeQFzbD
GERE55vST24iCDKu50o7j1adHdSP+5lkgM2UyFi4LEQYJZ2tKlOR+MhwBv3okNGo
zFzOObgjbT24e5Bw58G952WR3+25JgZRGgjDH0JXdpVe6peyPx/X9J/GyVeXz/fW
SnWCYLpLwbSm1jtBtF4TbezxxwHgtHjf7TIlyly6NDJMW3vmhZZy1H5mH+cy41BU
wbMPhtfcGlPO+GB0ZxAg5pYQoLT6aP/p3n2rwv6fgaIPyLmbrRAGrJ3afZRGkWo0
7/a11ShvFk1ahNg+kGh0q2ubLO0jlIh3EpwVHldpqWoHjCkiXdNCz3D+R0LUqkw6
nQLwO4JD0JnhR3o2NtliGEXWhkBlTXdQn+CUC2V0tgvDg0mrRGy1Za9qSfWkd81k
lYp9bJoBz32MVw==
=QBMl
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Three fixes for various bogosity in our linker script, revealed
by the recent commit which changed discard behaviour with some
toolchains.
* tag 'powerpc-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vmlinux.lds: Don't discard .comment
powerpc/vmlinux.lds: Don't discard .rela* for relocatable builds
powerpc/vmlinux.lds: Define RUNTIME_DISCARD_EXIT
Add support of identification registers to STM32 DFSDM
to allow hardware capabilities discovery and configuration check.
The number of filters and channels, are read from registers,
when they are available.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20230105125331.328275-1-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The magnetometer part of ST LSM303C is similar (perhaps even identical)
to the already supported standalone LIS3MDL magnetometer, so just
add the new st,lsm303c-magn compatible for the existing definitions.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-4-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The accelerometer part of ST LSM303C is similar (perhaps even identical)
to the already supported standalone LIS2HH12 accelerometer, so just
add the new st,lsm303c-accel compatible for the existing definitions.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-3-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The ST LSM303C [1] is a accelerometer and magnetometer combo sensor
compatible with the existing ST sensor bindings. Accelerometer and
magnetometer are exposed through separate I2C/SPI devices, so document
separate compatibles with -accel and -magn suffix.
[1]: https://www.st.com/resource/en/datasheet/lsm303c.pdf
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230106102239.9647-2-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The following kernel linkage error:
st_lsm6dsx_core.o: in function `st_lsm6dsx_sw_buffers_setup':
st_lsm6dsx_core.c:2578: undefined reference to `devm_iio_triggered_buffer_setup_ext'
is caused by the fact that the object owning devm_iio_triggered_buffer_setup_ext()
(drivers/iio/buffer/industrialio-triggered-buffer.o) is allowed to be
built as module when its user (drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c)
is built-in.
The st_lsm6dsx driver already has a "select IIO_BUFFER", so add another
select for IIO_TRIGGERED_BUFFER, to make that option follow what is set
for the st_lsm6dsx driver. This is similar to what other iio drivers do.
Fixes: 2cfb2180c3 ("iio: imu: st_lsm6dsx: introduce sw trigger support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230103130348.1733467-1-vladimir.oltean@nxp.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is no point to specify asm-generic for the unaligned.h.
Drop the 'generic' suffix and move the inclusion to be after
the non-IIO linux/* ones.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230103144903.39905-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused and code is obfuscated
by ifdeffery.
Drop anti-pattern of ACPI_PTR() use.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230102173450.29882-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The spi_get_device_match_data() helps to get driver data from the
firmware node or SPI ID table. Use it instead of open coding.
While at it, switch ID tables to provide an acrual pointers to
the configuration data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230102173450.29882-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It is useful to be able to build this driver without needing
to build support for ARCH_EP93XX.
Also add an explicit dependency on HAS_IOMEM so we have
devm_platform_ioremap_resource() etc available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20221231144128.489810-1-jic23@kernel.org
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old
in get_acl. x86 CMPXCHG instruction returns success in ZF flag,
so this change saves a compare after cmpxchg (and related move
instruction in front of cmpxchg).
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
* Fix kernel-doc for memblock_phys_free() to use correct names for the
counterpart allocation methods
* Fix compilation error in memblock tests
-----BEGIN PGP SIGNATURE-----
iQFMBAABCAA2FiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmO6bMYYHG1pa2UucmFw
b3BvcnRAZ21haWwuY29tAAoJEDkDhibLDv2RUt8H/Ayh8cO8kpKbJ2jH9eFwba6T
JPOv5P3hjKHbY+NMGG9MfAUTMw6Lxa59EiC+xGyPFWrtt/ZpKgaaBznxSC7dkVYy
XarzK3zulZmL4BdjBQearXXj5gSkZnuEHb9Pjs19GLDnGoRJczoHYG6rXlAWh1sg
w4H4g4QyHKYqqUlnbDi0GTIaaKY76Uprw6x6w8xwtmdUw9+1edqnoN9fRJxY9AwM
7ez7FR6rJ5g7AgcLfa/dTaCZgloLPKVdMI+q29lBXM5xDrUpxeEfXg5iU7Hax+rT
4o43HXGVGyiuWYlgdWd9B18M4Xma55K1Q+cQ3cELsAvq7XACvQcA6xi0QnFfgpU=
=DNKq
-----END PGP SIGNATURE-----
Merge tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Small fixes in kernel-doc and tests:
- Fix kernel-doc for memblock_phys_free() to use correct names for
the counterpart allocation methods
- Fix compilation error in memblock tests"
* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Fix doc for memblock_phys_free
memblock tests: Fix compilation error.
-----BEGIN PGP SIGNATURE-----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=iwoA
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-fixes-20230107' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fix race between call connection, data transmit and call disconnect
Here are patches to fix an oops[1] caused by a race between call
connection, initial packet transmission and call disconnection which
results in something like:
kernel BUG at net/rxrpc/peer_object.c:413!
when the syzbot test is run. The problem is that the connection procedure
is effectively split across two threads and can get expanded by taking an
interrupt, thereby adding the call to the peer error distribution list
*after* it has been disconnected (say by the rxrpc socket shutting down).
The easiest solution is to look at the fourth set of I/O thread
conversion/SACK table expansion patches that didn't get applied[2] and take
from it those patches that move call connection and disconnection into the
I/O thread. Moving these things into the I/O thread means that the
sequencing is managed by all being done in the same thread - and the race
can no longer happen.
This is preferable to introducing an extra lock as adding an extra lock
would make the I/O thread have to wait for the app thread in yet another
place.
The changes can be considered as a number of logical parts:
(1) Move all of the call state changes into the I/O thread.
(2) Make client connection ID space per-local endpoint so that the I/O
thread doesn't need locks to access it.
(3) Move actual abort generation into the I/O thread and clean it up. If
sendmsg or recvmsg want to cause an abort, they have to delegate it.
(4) Offload the setting up of the security context on a connection to the
thread of one of the apps that's starting a call. We don't want to be
doing any sort of crypto in the I/O thread.
(5) Connect calls (ie. assign them to channel slots on connections) in the
I/O thread. Calls are set up by sendmsg/kafs and passed to the I/O
thread to connect. Connections are allocated in the I/O thread after
this.
(6) Disconnect calls in the I/O thread.
I've also added a patch for an unrelated bug that cropped up during
testing, whereby a race can occur between an incoming call and socket
shutdown.
Note that whilst this fixes the original syzbot bug, another bug may get
triggered if this one is fixed:
INFO: rcu detected stall in corrupted
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { P5792 } 2657 jiffies s: 2825 root: 0x0/T
rcu: blocking rcu_node structures (internal RCU debug):
It doesn't look this should be anything to do with rxrpc, though, as I've
tested an additional patch[3] that removes practically all the RCU usage
from rxrpc and it still occurs. It seems likely that it is being caused by
something in the tunnelling setup that the syzbot test does, but there's
not enough info to go on. It also seems unlikely to be anything to do with
the afs driver as the test doesn't use that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The 32-bit memory resource is needed for non-prefetchable memory
allocations on the PCIe bus, however with some cards (such as the
SM768) the system fails to allocate memory from this.
Checking the allocation against the datasheet, it looks like there
has been a mis-calcualation of the resource for the first memory
region (0x0060090000..0x0070ffffff) which in the data-sheet for
the fu740 (v1p2) is from 0x0060000000..0x007fffffff. Changing
this to allocate from 0x0060090000..0x007fffffff fixes the probing
issues.
Fixes: ae80d51480 ("riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC")
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: stable@vger.kernel.org
Tested-by: Ron Economos <re@w6rz.net> # from IRC
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Highlights include:
Bugfixes
- Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls
- Fix a broken coalescing test in the pNFS file layout driver
- Ensure that the access cache rcu path also applies the login test
- Fix up for a sparse warning
-----BEGIN PGP SIGNATURE-----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=N6cT
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
- Fix a race in the RPCSEC_GSS upcall code that causes hung RPC calls
- Fix a broken coalescing test in the pNFS file layout driver
- Ensure that the access cache rcu path also applies the login test
- Fix up for a sparse warning
* tag 'nfs-for-6.2-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix up a sparse warning
NFS: Judge the file access cache's timestamp in rcu path
pNFS/filelayout: Fix coalescing test for single DS
SUNRPC: ensure the matching upcall is in-flight upon downcall
- Fix DT memory scanning for some MIPS boards when memory is not
specified in DT
- Redo CONFIG_CMDLINE* handling for missing /chosen node. The first
attempt broke PS3 (and possibly other PPC platforms).
- Fix constraints in QCom Soundwire schema
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmO5jqUACgkQ+vtdtY28
YcPxLQ//VIeelvp7U8HgdB13ZlWC1DXYTDZUgIev3R/sggws4swkCu5cZP3xbKnD
88uW9Lbv5sSSfAXdr3hbr3z4sHLilX5mSc/1QvaIDrS0eECeFAUu8Me5Rx/Om806
0k8/1OmCgCr0RFJgjtersfw3CFnOLAauxYIr4mGCD8kWnXMgKSK/JyiTDV3+g3U2
Y6IgR+Hn8zt8DB1LkrRZJis5LQT1AxFtEzfKUEa+j/xG4z+B1vg8wENsYDr+/s9+
LAq4QhrzAU/Ys+ZUF3HqkZxj6WR7aMq5MSBihs1AXjR772g+EY7Ob00hPdf2MdFz
TEF0GFTHQjvzM2TGY+V4AWKLER5Oxq0AsT7n8qsnPCJBRrVp1EHpfQUfhpibB0GN
TGQlskUWJW8ivjl54jX/wzJyx3ZlW4SmeD5c5RRaLOKHMhfIjsAdjQJIfNfPTE93
oCU9GniXhWoQDRCheqy5LIY7+hm1nuYra0WUzjp1rmfcZ2xia70ZKdbJe5gIAJVr
fmefpzyxY5TeaZPIBsLysN9QURk3C5GXGyKHofcQsC4TCn3qgzNoSmYkESAjTtkW
kUzNraoIhY92HN0jDfYD1/iGTeOzAYnL4kqILKIoNtBEQmyFZqxLUk6TX7Cm8QJU
BZTPuxzmMJMFx88FB/nPdNlyQcELSjrTAfFMd5i7/WBuY3OTYIE=
=qIdA
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix DT memory scanning for some MIPS boards when memory is not
specified in DT
- Redo CONFIG_CMDLINE* handling for missing /chosen node. The first
attempt broke PS3 (and possibly other PPC platforms).
- Fix constraints in QCom Soundwire schema
* tag 'devicetree-fixes-for-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fdt: Honor CONFIG_CMDLINE* even without /chosen node, take 2
Revert "of: fdt: Honor CONFIG_CMDLINE* even without /chosen node"
dt-bindings: soundwire: qcom,soundwire: correct sizes related to number of ports
of/fdt: run soc memory setup when early_init_dt_scan_memory fails
Here are some small USB driver fixes for 6.2-rc3 that resolve some
reported issues. They include:
- of-reported ulpi problem, so the offending commit is reverted
- dwc3 driver bugfixes for recent changes
- fotg210 fixes
Most of these have been in linux-next for a while, the last few were on
the mailing list for a long time and passed all the 0-day bot testing
so all should be fine with them as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY7mSJQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl2JACg2BSLmfVYhG6guZHq5KxerYG3/uYAoJx/qDgn
PefqVtyFfd+LClygKdOS
=Ax7a
-----END PGP SIGNATURE-----
Merge tag 'usb-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 6.2-rc3 that resolve some
reported issues. They include:
- of-reported ulpi problem, so the offending commit is reverted
- dwc3 driver bugfixes for recent changes
- fotg210 fixes
Most of these have been in linux-next for a while, the last few were
on the mailing list for a long time and passed all the 0-day bot
testing so all should be fine with them as well"
* tag 'usb-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: gadget: Ignore End Transfer delay on teardown
usb: dwc3: xilinx: include linux/gpio/consumer.h
usb: fotg210-udc: fix error return code in fotg210_udc_probe()
usb: fotg210: fix OTG-only build
Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"
A big data corruption regression due to a change in the scatterlist
- Fix compilation warnings on gcc 13
- Oops when using some mlx5 stats
- Bad enforcement of atomic responder resources in mlx5
- Do not wrongly combine non-contiguous pages in scatterlist
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCY7izVgAKCRCFwuHvBreF
YfOXAQC08HilnYdRjlVrxswOQIN1KzHQ63xDXM0Rv99XOcSKCgD+LeXkeCeJ0XWW
kBtkPnhR194phADv4nWaaSrIc52DtA0=
=HxxG
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Most noticeable is that Yishai found a big data corruption regression
due to a change in the scatterlist:
- Do not wrongly combine non-contiguous pages in scatterlist
- Fix compilation warnings on gcc 13
- Oops when using some mlx5 stats
- Bad enforcement of atomic responder resources in mlx5"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
lib/scatterlist: Fix to merge contiguous pages into the last SG properly
RDMA/mlx5: Fix validation of max_rd_atomic caps for DC
RDMA/mlx5: Fix mlx5_ib_get_hw_stats when used for device
RDMA/srp: Move large values to a new enum for gcc13
- Fix single *.ko build
- Fix module builds when vmlinux.o or Module.symver is missing
-----BEGIN PGP SIGNATURE-----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=O13V
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix single *.ko build
- Fix module builds when vmlinux.o or Module.symver is missing
* tag 'kbuild-fixes-v6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: readd -w option when vmlinux.o or Module.symver is missing
kbuild: fix single *.ko build
The premise that "Once an svc thread is scheduled and executing an
RPC, no other processes will touch svc_rqst::rq_flags" is false.
svc_xprt_enqueue() examines the RQ_BUSY flag in scheduled nfsd
threads when determining which thread to wake up next.
Fixes: 9315564747 ("NFSD: Use only RQ_DROPME to signal the need to drop a reply")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
With the TMIO MFD drivers gone, the NAND support is also
obsolete and can be removed.
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
