Commit graph

1,169,205 commits

Author SHA1 Message Date
Dmitry Safonov
c9110dfcfc printk: Remove console_silent()
It' unused since removal of mn10300:
commit 739d875dd6 ("mn10300: Remove the architecture")
x86 stopped using it in v2.6.12 (see history git):
commit 7574828b3dbb ("[PATCH] x86_64: add nmi button support")

Let's clean it up from the header.

Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210727130635.675184-2-dima@arista.com
2021-07-29 16:07:06 +02:00
David S. Miller
e5fe3a5fe3 Merge branch 'mctp'
Jeremy Kerr says:

====================
Add Management Component Transport Protocol support

This series adds core MCTP support to the kernel. From the Kconfig
description:

  Management Component Transport Protocol (MCTP) is an in-system
  protocol for communicating between management controllers and
  their managed devices (peripherals, host processors, etc.). The
  protocol is defined by DMTF specification DSP0236.

  This option enables core MCTP support. For communicating with other
  devices, you'll want to enable a driver for a specific hardware
  channel.

This implementation allows a sockets-based API for sending and receiving
MCTP messages via sendmsg/recvmsg on SOCK_DGRAM sockets. Kernel stack
control is all via netlink, using existing RTM_* messages. The userspace
ABI change is fairly small; just the necessary AF_/ETH_P_/ARPHDR_
constants, a new sockaddr, and a new netlink attribute.

For MAINTAINERS, I've just included netdev@ as the list entry. I'm happy
to alter this based on preferences here - an alternative would be the
OpenBMC list (the main user of the MCTP interface), or we can create a
new list entirely.

We have a couple of interface drivers almost ready to go at the moment,
but those can wait until the core code has some review.

This is v4 of the series; v1 and v2 were both RFC.

selinux folks: CCing 01/15 due to the new PF_MCTP protocol family.

linux-doc folks: CCing 15/15 for the new MCTP overview document.

Review, comments, questions etc. are most welcome.

Cheers,

Jeremy

v2:
 - change to match spec terminology: controller -> component
 - require specific capabilities for bind() & sendmsg()
 - add address and tag defintions to uapi
 - add selinux AF_MCTP table definitions
 - remove strict cflags; warnings are present in common headers

v3:
 - require caps for MCTP bind() & send()
 - comment typo fixes
 - switch to an array for local EIDs
 - fix addrinfo dump iteration & error path
 - add RTM_DELADDR
 - remove GENMASK() and BIT() from uapi

v4:
 - drop tun patch; that can be submitted separately
 - keep nipa happy: add maintainer CCs, including doc and selinux
 - net-next rebase
 - Include AF_MCTP in af_family_slock_keys and pf_family_names
 - Introduce MODULE_ definitions earlier
 - upstream change: set_link_af no longer called with RTNL held
 - add kdoc for net_device.mctp_ptr
 - don't inline mctp_rt_match_eid
 - require rtm_type == RTN_UNICAST in route management handlers
 - remove unused RTAX policy table
 - fix mctp_sock->keys rcu annotations
 - fix spurious rcu_read_unlock in route input
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Jeremy Kerr
6a2d98b189 mctp: Add MCTP overview document
This change adds a brief document about the sockets API provided for
sending and receiving MCTP messages from userspace.

This is roughly based on the OpenBMC design document, at:

  https://github.com/openbmc/docs/blob/master/designs/mctp/mctp-kernel.md

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Matt Johnston
03f2bbc4ee mctp: Allow per-netns default networks
Currently we have a compile-time default network
(MCTP_INITIAL_DEFAULT_NET). This change introduces a default_net field
on the net namespace, allowing future configuration for new interfaces.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Matt Johnston
26ab3fcaf2 mctp: Add dest neighbour lladdr to route output
Now that we have a neighbour implementation, hook it up to the output
path to set the dest hardware address for outgoing packets.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Jeremy Kerr
4a992bbd36 mctp: Implement message fragmentation & reassembly
This change implements MCTP fragmentation (based on route & device MTU),
and corresponding reassembly.

The MCTP specification only allows for fragmentation on the originating
message endpoint, and reassembly on the destination endpoint -
intermediate nodes do not need to reassemble/refragment.  Consequently,
we only fragment in the local transmit path, and reassemble
locally-bound packets. Messages are required to be in-order, so we
simply cancel reassembly on out-of-order or missing packets.

In the fragmentation path, we just break up the message into MTU-sized
fragments; the skb structure is a simple copy for now, which we can later
improve with a shared data implementation.

For reassembly, we keep track of incoming message fragments using the
existing tag infrastructure, allocating a key on the (src,dest,tag)
tuple, and reassembles matching fragments into a skb->frag_list.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Jeremy Kerr
833ef3b91d mctp: Populate socket implementation
Start filling-out the socket syscalls: bind, sendmsg & recvmsg.

This requires an input route implementation, so we add to
mctp_route_input, allowing lookups on binds & message tags. This just
handles single-packet messages at present, we will add fragmentation in
a future change.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Matt Johnston
831119f887 mctp: Add neighbour netlink interface
This change adds the netlink interfaces for manipulating the MCTP
neighbour table.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Matt Johnston
4d8b931928 mctp: Add neighbour implementation
Add an initial neighbour table implementation, to be used in the route
output path.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Matt Johnston
06d2f4c583 mctp: Add netlink route management
This change adds RTM_GETROUTE, RTM_NEWROUTE & RTM_DELROUTE handlers,
allowing management of the MCTP route table.

Includes changes from Jeremy Kerr <jk@codeconstruct.com.au>.

Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Jeremy Kerr
889b7da23a mctp: Add initial routing framework
Add a simple routing table, and a couple of route output handlers, and
the mctp packet_type & handler.

Includes changes from Matt Johnston <matt@codeconstruct.com.au>.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Jeremy Kerr
583be982d9 mctp: Add device handling and netlink interface
This change adds the infrastructure for managing MCTP netdevices; we add
a pointer to the AF_MCTP-specific data to struct netdevice, and hook up
the rtnetlink operations for adding and removing addresses.

Includes changes from Matt Johnston <matt@codeconstruct.com.au>.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Jeremy Kerr
4b2e69305c mctp: Add initial driver infrastructure
Add an empty drivers/net/mctp/, for future interface drivers.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Jeremy Kerr
60fc639816 mctp: Add sockaddr_mctp to uapi
This change introduces the user-visible MCTP header, containing the
protocol-specific addressing definitions.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:50 +01:00
Jeremy Kerr
2c8e2e9aec mctp: Add base packet definitions
Simple packet header format as defined by DMTF DSP0236.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:49 +01:00
Jeremy Kerr
8f601a1e4f mctp: Add base socket/protocol definitions
Add an empty socket implementation, plus initialisation/destruction
handlers.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:49 +01:00
Jeremy Kerr
bc49d8169a mctp: Add MCTP base
Add basic Kconfig, an initial (empty) af_mctp source object, and
{AF,PF}_MCTP definitions, and the required definitions for a new
protocol type.

Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 15:06:49 +01:00
Michael Ellerman
a88603f4b9 powerpc/vdso: Don't use r30 to avoid breaking Go lang
The Go runtime uses r30 for some special value called 'g'. It assumes
that value will remain unchanged even when calling VDSO functions.
Although r30 is non-volatile across function calls, the callee is free
to use it, as long as the callee saves the value and restores it before
returning.

It used to be true by accident that the VDSO didn't use r30, because the
VDSO was hand-written asm. When we switched to building the VDSO from C
the compiler started using r30, at least in some builds, leading to
crashes in Go. eg:

  ~/go/src$ ./all.bash
  Building Go cmd/dist using /usr/lib/go-1.16. (go1.16.2 linux/ppc64le)
  Building Go toolchain1 using /usr/lib/go-1.16.
  go build os/exec: /usr/lib/go-1.16/pkg/tool/linux_ppc64le/compile: signal: segmentation fault
  go build reflect: /usr/lib/go-1.16/pkg/tool/linux_ppc64le/compile: signal: segmentation fault
  go tool dist: FAILED: /usr/lib/go-1.16/bin/go install -gcflags=-l -tags=math_big_pure_go compiler_bootstrap bootstrap/cmd/...: exit status 1

There are patches in flight to fix Go[1], but until they are released
and widely deployed we can workaround it in the VDSO by avoiding use of
r30.

Note this only works with GCC, clang does not support -ffixed-rN.

1: https://go-review.googlesource.com/c/go/+/328110

Fixes: ab037dd87a ("powerpc/vdso: Switch VDSO to generic C implementation.")
Cc: stable@vger.kernel.org # v5.11+
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729131244.2595519-1-mpe@ellerman.id.au
2021-07-29 23:13:12 +10:00
Srikar Dronamraju
333cf50746 powerpc/pseries: Fix regression while building external modules
With commit c9f3401313 ("powerpc: Always enable queued spinlocks for
64s, disable for others") CONFIG_PPC_QUEUED_SPINLOCKS is always
enabled on ppc64le, external modules that use spinlock APIs are
failing.

  ERROR: modpost: GPL-incompatible module XXX.ko uses GPL-only symbol 'shared_processor'

Before the above commit, modules were able to build without any
issues. Also this problem is not seen on other architectures. This
problem can be workaround if CONFIG_UNINLINE_SPIN_UNLOCK is enabled in
the config. However CONFIG_UNINLINE_SPIN_UNLOCK is not enabled by
default and only enabled in certain conditions like
CONFIG_DEBUG_SPINLOCKS is set in the kernel config.

  #include <linux/module.h>
  spinlock_t spLock;

  static int __init spinlock_test_init(void)
  {
          spin_lock_init(&spLock);
          spin_lock(&spLock);
          spin_unlock(&spLock);
          return 0;
  }

  static void __exit spinlock_test_exit(void)
  {
  	printk("spinlock_test unloaded\n");
  }
  module_init(spinlock_test_init);
  module_exit(spinlock_test_exit);

  MODULE_DESCRIPTION ("spinlock_test");
  MODULE_LICENSE ("non-GPL");
  MODULE_AUTHOR ("Srikar Dronamraju");

Given that spin locks are one of the basic facilities for module code,
this effectively makes it impossible to build/load almost any non GPL
modules on ppc64le.

This was first reported at https://github.com/openzfs/zfs/issues/11172

Currently shared_processor is exported as GPL only symbol.
Fix this for parity with other architectures by exposing
shared_processor to non-GPL modules too.

Fixes: 14c73bd344 ("powerpc/vcpu: Assume dedicated processors as non-preempt")
Cc: stable@vger.kernel.org # v5.5+
Reported-by: marc.c.dionne@gmail.com
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210729060449.292780-1-srikar@linux.vnet.ibm.com
2021-07-29 22:34:58 +10:00
Willy Tarreau
3c18e9baee USB: serial: ch341: fix character loss at high transfer rates
The chip supports high transfer rates, but with the small default buffers
(64 bytes read), some entire blocks are regularly lost. This typically
happens at 1.5 Mbps (which is the default speed on Rockchip devices) when
used as a console to access U-Boot where the output of the "help" command
misses many lines and where "printenv" mangles the environment.

The FTDI driver doesn't suffer at all from this. One difference is that
it uses 512 bytes rx buffers and 256 bytes tx buffers. Adopting these
values completely resolved the issue, even the output of "dmesg" is
reliable. I preferred to leave the Tx value unchanged as it is not
involved in this issue, while a change could increase the risk of
triggering the same issue with other devices having too small buffers.

I verified that it backports well (and works) at least to 5.4. It's of
low importance enough to be dropped where it doesn't trivially apply
anymore.

Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20210724152739.18726-1-w@1wt.eu
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-07-29 13:52:10 +02:00
Ian Mackinnon
340cd23d9d Bluetooth: btusb: Load Broadcom firmware for Dell device 413c:8197
Remove the btusb_table entry for 413c:8197 so the device is handled
by the later Dell vendor entry, which specifies patchram loading.

T:  Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=413c ProdID=8197 Rev= 1.12
S:  Manufacturer=Dell Computer Corp
S:  Product=DW380 Bluetooth Module
S:  SerialNumber=74E54354F609
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

Signed-off-by: Ian Mackinnon <imackinnon@gmail.com>
Tested-By: Aathif Naseer <aathif394@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-29 13:49:47 +02:00
Len Baker
785077fa2d Bluetooth: btmrvl_sdio: Remove all strcpy() uses
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. The safe replacement is strscpy() but in
this case it is better to use the scnprintf to simplify the arithmetic.

This is a previous step in the path to remove the strcpy() function
entirely from the kernel.

Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-29 13:46:13 +02:00
Desmond Cheong Zhi Xi
92fe24a7db Bluetooth: skip invalid hci_sync_conn_complete_evt
Syzbot reported a corrupted list in kobject_add_internal [1]. This
happens when multiple HCI_EV_SYNC_CONN_COMPLETE event packets with
status 0 are sent for the same HCI connection. This causes us to
register the device more than once which corrupts the kset list.

As this is forbidden behavior, we add a check for whether we're
trying to process the same HCI_EV_SYNC_CONN_COMPLETE event multiple
times for one connection. If that's the case, the event is invalid, so
we report an error that the device is misbehaving, and ignore the
packet.

Link: https://syzkaller.appspot.com/bug?extid=66264bf2fd0476be7e6c [1]
Reported-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Tested-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2021-07-29 13:37:29 +02:00
David S. Miller
658e6b1612 Merge branch 'nfc-const'
Krzysztof Kozlowski says:

====================
nfc: constify, continued (part 2)

On top of:
nfc: constify pointed data
https://lore.kernel.org/lkml/20210726145224.146006-1-krzysztof.kozlowski@canonical.com/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:03 +01:00
Krzysztof Kozlowski
2695503729 nfc: mrvl: constify static nfcmrvl_if_ops
File-scope struct nfcmrvl_if_ops is not modified so can be made const.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:03 +01:00
Krzysztof Kozlowski
fe53159fe3 nfc: mrvl: constify several pointers
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:03 +01:00
Krzysztof Kozlowski
a751449f8b nfc: microread: constify several pointers
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:03 +01:00
Krzysztof Kozlowski
3d463dd502 nfc: fdp: constify several pointers
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.  This allows also
making file-scope nci_core_get_config_otp_ram_version array const.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:03 +01:00
Krzysztof Kozlowski
c3e26b6dc1 nfc: fdp: use unsigned int as loop iterator
Loop iterators are simple integers, no point to optimize the size and
use u8.  It only raises the question whether the variable is used in
some other context.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:03 +01:00
Krzysztof Kozlowski
6c755b1d25 nfc: fdp: drop unneeded cast for printing firmware size in dev_dbg()
Size of firmware is a type of size_t, so print it directly instead of
casting to int.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:03 +01:00
Krzysztof Kozlowski
582fdc98ad nfc: nfcsim: constify drvdata (struct nfcsim)
nfcsim_abort_cmd() does not modify struct nfcsim, so local variable
can be a pointer to const.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:03 +01:00
Krzysztof Kozlowski
83428dbbac nfc: virtual_ncidev: constify pointer to nfc_dev
virtual_ncidev_ioctl() does not modify struct nfc_dev, so local variable
can be a pointer to const.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:03 +01:00
Krzysztof Kozlowski
ea050c5ee7 nfc: trf7970a: constify several pointers
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:03 +01:00
Krzysztof Kozlowski
9a4af01c35 nfc: port100: constify several pointers
Several functions do not modify pointed data so arguments and local
variables can be const for correctness and safety.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:03 +01:00
Krzysztof Kozlowski
894a6e1586 nfc: mei_phy: constify buffer passed to mei_nfc_send()
The buffer passed to mei_nfc_send() can be const for correctness and
safety.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:02 +01:00
Krzysztof Kozlowski
dd8987a394 nfc: constify passed nfc_dev
The struct nfc_dev is not modified by nfc_get_drvdata() and
nfc_device_name() so it can be made a const.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:28:02 +01:00
David S. Miller
8cb79af5c6 Merge branch 'skb-gro-optimize'
Paolo Abeni says:

====================
sk_buff: optimize GRO for the common case

This is a trimmed down revision of "sk_buff: optimize layout for GRO",
specifically dropping the changes to the sk_buff layout[1].

This series tries to accomplish 2 goals:
- optimize the GRO stage for the most common scenario, avoiding a bunch
  of conditional and some more code
- let owned skbs entering the GRO engine, allowing backpressure in the
  veth GRO forward path.

A new sk_buff flag (!!!) is introduced and maintained for GRO's sake.
Such field uses an existing hole, so there is no change to the sk_buff
size.

[1] two main reasons:
- move skb->inner_ field requires some extra care, as some in kernel
  users access and the fields regardless of skb->encapsulation.
- extending secmark size clash with ct and nft uAPIs

address the all above is possible, I think, but for sure not in a single
series.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:18:51 +01:00
Paolo Abeni
d504fff0d1 veth: use skb_prepare_for_gro()
Leveraging the previous patch we can now avoid orphaning the
skb in the veth gro path, allowing correct backpressure.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:18:12 +01:00
Paolo Abeni
5e10da5385 skbuff: allow 'slow_gro' for skb carring sock reference
This change leverages the infrastructure introduced by the previous
patches to allow soft devices passing to the GRO engine owned skbs
without impacting the fast-path.

It's up to the GRO caller ensuring the slow_gro bit validity before
invoking the GRO engine. The new helper skb_prepare_for_gro() is
introduced for that goal.

On slow_gro, skbs are aggregated only with equal sk.
Additionally, skb truesize on GRO recycle and free is correctly
updated so that sk wmem is not changed by the GRO processing.

rfc-> v1:
 - fixed bad truesize on dev_gro_receive NAPI_FREE
 - use the existing state bit

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:18:12 +01:00
Paolo Abeni
9efb4b5baf net: optimize GRO for the common case.
After the previous patches, at GRO time, skb->slow_gro is
usually 0, unless the packets comes from some H/W offload
slowpath or tunnel.

We can optimize the GRO code assuming !skb->slow_gro is likely.
This remove multiple conditionals in the most common path, at the
price of an additional one when we hit the above "slow-paths".

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:18:12 +01:00
Paolo Abeni
b0999f385a sk_buff: track extension status in slow_gro
Similar to the previous one, but tracking the
active_extensions field status.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:18:11 +01:00
Paolo Abeni
8a886b142b sk_buff: track dst status in slow_gro
Similar to the previous patch, but covering the dst field:
the slow_gro flag is additionally set when a dst is attached
to the skb

RFC -> v1:
 - use the existing flag instead of adding a new one

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:18:11 +01:00
Paolo Abeni
5fc88f93ed sk_buff: introduce 'slow_gro' flags
The new flag tracks if any state field is set, so that
GRO requires 'unusual'/slow prepare steps.

Set such flag when a ct entry is attached to the skb,
and never clear it.

The new bit uses an existing hole into the sk_buff struct

RFC -> v1:
 - use a single state bit, never clear it
 - avoid moving the _nfct field

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-29 12:18:11 +01:00
Hans de Goede
153cca9caa platform/x86: Add and use a dual_accel_detect() helper
Various 360 degree hinges (yoga) style 2-in-1 devices use 2 accelerometers
to allow the OS to determine the angle between the display and the base of
the device.

On Windows these are read by a special HingeAngleService process which
calls undocumented ACPI methods, to let the firmware know if the 2-in-1 is
in tablet- or laptop-mode. The firmware may use this to disable the kbd and
touchpad to avoid spurious input in tablet-mode as well as to report
SW_TABLET_MODE info to the OS.

Since Linux does not call these undocumented methods, the SW_TABLET_MODE
info reported by various pdx86 drivers is incorrect on these devices.

Before this commit the intel-hid and thinkpad_acpi code already had 2
hardcoded checks for ACPI hardware-ids of dual-accel sensors to avoid
reporting broken info.

And now we also have a bug-report about the same problem in the intel-vbtn
code. Since there are at least 3 different ACPI hardware-ids in play, add
a new dual_accel_detect() helper which checks for all 3, rather then
adding different hardware-ids to the drivers as bug-reports trickle in.
Having shared code which checks all known hardware-ids is esp. important
for the intel-hid and intel-vbtn drivers as these are generic drivers
which are used on a lot of devices.

The BOSC0200 hardware-id requires special handling, because often it is
used for a single-accelerometer setup. Only in a few cases it refers to
a dual-accel setup, in which case there will be 2 I2cSerialBus resources
in the device's resource-list, so the helper checks for this.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209011
Reported-and-tested-by: Julius Lehmann <julius@devpi.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210729082134.6683-1-hdegoede@redhat.com
2021-07-29 13:14:07 +02:00
David Sterba
7280305eb5 btrfs: calculate number of eb pages properly in csum_tree_block
Building with -Warray-bounds on systems with 64K pages there's a
warning:

  fs/btrfs/disk-io.c: In function ‘csum_tree_block’:
  fs/btrfs/disk-io.c:226:34: warning: array subscript 1 is above array bounds of ‘struct page *[1]’ [-Warray-bounds]
    226 |   kaddr = page_address(buf->pages[i]);
        |                        ~~~~~~~~~~^~~
  ./include/linux/mm.h:1630:48: note: in definition of macro ‘page_address’
   1630 | #define page_address(page) lowmem_page_address(page)
        |                                                ^~~~
  In file included from fs/btrfs/ctree.h:32,
                   from fs/btrfs/disk-io.c:23:
  fs/btrfs/extent_io.h:98:15: note: while referencing ‘pages’
     98 |  struct page *pages[1];
        |               ^~~~~

The compiler has no way to know that in that case the nodesize is exactly
PAGE_SIZE, so the resulting number of pages will be correct (1).

Let's use num_extent_pages that makes the case nodesize == PAGE_SIZE
explicitly 1.

Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-07-29 13:01:04 +02:00
Yunhao Tian
c0c81245da clk: rockchip: make rk3308 ddrphy4x clock critical
Currently, no driver support for DDR memory controller (DMC) is present,
as a result, no driver is explicitly consuming the ddrphy clock. This means
that VPLL1 (parent of ddr clock) will be shutdown if we enable
and then disable any child clock of VPLL1 (e.g. SCLK_I2S0_8CH_TX).
If VPLL1 is disabled, the whole system will freeze, because the DDR
controller will lose its clock. So, it's necessary to prevent VPLL1 from
shutting down, by marking the ddrphy4x CLK_IS_CRITICAL.

This bug was discovered when I was porting rockchip_i2s_tdm driver to
mainline kernel from Rockchip 4.4 kernel. I guess that other Rockchip
SoCs without DMC driver may need the same patch. If this applies to
other devices, please let us know.

Signed-off-by: Yunhao Tian <t123yh@outlook.com>
Link: https://lore.kernel.org/r/BYAPR20MB24886765F888A9705CBEB70789E39@BYAPR20MB2488.namprd20.prod.outlook.com
[adapted subject, changed to add the clock to the critical list]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-07-29 12:43:11 +02:00
Michael Zaidman
db8d3a2127 HID: ft260: fix device removal due to USB disconnect
This commit fixes a functional regression introduced by the commit 82f09a637d
("HID: ft260: improve error handling of ft260_hid_feature_report_get()")
when upon USB disconnect, the FTDI FT260 i2c device is still available within
the /dev folder.

In my company's product, where the host USB to FT260 USB connection is
hard-wired in the PCB, the issue is not reproducible. To reproduce it, I used
the VirtualBox Ubuntu 20.04 VM and the UMFT260EV1A development module for the
FTDI FT260 chip:

Plug the UMFT260EV1A module into a USB port and attach it to VM.

The VM shows 2 i2c devices under the /dev:
    michael@michael-VirtualBox:~$ ls /dev/i2c-*
    /dev/i2c-0  /dev/i2c-1

The i2c-0 is not related to the FTDI FT260:
    michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-0/name
    SMBus PIIX4 adapter at 4100

The i2c-1 is created by hid-ft260.ko:
    michael@michael-VirtualBox:~$ cat /sys/bus/i2c/devices/i2c-1/name
    FT260 usb-i2c bridge on hidraw1

Now, detach the FTDI FT260 USB device from VM. We expect the /dev/i2c-1
to disappear, but it's still here:
    michael@michael-VirtualBox:~$ ls /dev/i2c-*
    /dev/i2c-0  /dev/i2c-1

And the kernel log shows:
    [  +0.001202] usb 2-2: USB disconnect, device number 3
    [  +0.000109] ft260 0003:0403:6030.0002: failed to retrieve system status
    [  +0.000316] ft260 0003:0403:6030.0003: failed to retrieve system status

It happens because the commit 82f09a637d changed the ft260_get_system_config()
return logic. This caused the ft260_is_interface_enabled() to exit with error
upon the FT260 device USB disconnect, which in turn, aborted the ft260_remove()
before deleting the FT260 i2c device and cleaning its sysfs stuff.

This commit restores the FT260 USB removal functionality and improves the
ft260_is_interface_enabled() code to handle correctly all chip modes defined
by the device interface configuration pins DCNF0 and DCNF1.

Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Acked-by: Aaron Jones (FTDI-UK) <aaron.jones@ftdichip.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2021-07-29 12:38:32 +02:00
Colin Ian King
a86aadeff2 MIPS: Alchemy: Fix spelling contraction "cant" -> "can't"
There is a spelling mistake in a pr_warn message. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-07-29 11:41:05 +02:00
Peter Geis
6fffe52fb3 clk: rockchip: drop GRF dependency for rk3328/rk3036 pll types
The rk3036/rk3328 pll types were converted to checking the lock status
via the internal register in january 2020, so don't need the grf
reference since then.

But it was forgotten to remove grf check when deciding between the
pll rate ops (read-only vs. read-write), so a clock driver without
the needed grf reference might've been put into the read-only mode
just because the grf reference was missing.

This affected the rk356x that needs to reclock certain plls at boot.

Fix this by removing the check for the grf for selecting the utilized
operations.

Suggested-by: Heiko Stuebner <heiko@sntech.de>
Fixes: 7f6ffbb885 ("clk: rockchip: convert rk3036 pll type to use internal lock status")
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
[adjusted the commit message, adjusted the fixes tag]
Link: https://lore.kernel.org/r/20210728180034.717953-3-pgwipeout@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-07-29 11:22:29 +02:00
Alexander Monakov
0d4867a185 ALSA: hda/realtek: add mic quirk for Acer SF314-42
The Acer Swift SF314-42 laptop is using Realtek ALC255 codec. Add a
quirk so microphone in a headset connected via the right-hand side jack
is usable.

Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210721170141.24807-1-amonakov@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-29 10:43:49 +02:00