Commit graph

1,169,205 commits

Author SHA1 Message Date
Martin Blumenstingl
0bd475db1a ARM: dts: meson8b: ec100: wire up the RT5640 audio codec
The Realtek RT5640 codec is connected to the SoC's I2S interface.
Describe this in the .dts together with the codec's LDO1 enable GPIO so
audio can be played on the Endless Mini.
While here, add a note about the realtek,ldo1-en-gpios for which the
EC100 uses GPIO_BSD_EN. Due to driver limitations this pin cannot be
used currently.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210717233030.331273-3-martin.blumenstingl@googlemail.com
2021-07-26 10:01:03 +02:00
Martin Blumenstingl
4f8ca13df1 ARM: dts: meson: Add the AIU audio controller
Add the AIU audio controller to the Amlogic Meson6/8/8b/8m2 SoC DT. This
provides I2S and SPDIF outputs as well as codec glues for the internal
HDMI controller.
Also add the clock inputs and pin mux definitions on Meson8/8b/8m2. On
Meson6 this is omitted because we neither have a clock nor pin
controller node there yet.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210717233030.331273-2-martin.blumenstingl@googlemail.com
2021-07-26 10:01:03 +02:00
Anand Moon
c8cec81305 ARM: multi_v7_defconfig: Enable CONFIG_MMC_MESON_MX_SDHC
Enable CONFIG_MMC_MESON_MX_SDHC so that SDHC host controller
on Amlogic SoCs boards enable support for eMMC and MMC drivers.

Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210715092233.1084-1-linux.amoon@gmail.com
2021-07-26 09:59:09 +02:00
Chen-Yu Tsai
46f2735c17 arm64: dts: meson-gxbb: nanopi-k2: Enable Bluetooth
The NanoPi K2 has a AP6212 WiFi+BT combo module. The WiFi portion is
already enabled. The BT part is connected via UART and I2S.

Enable the UART and add a device node describing the Bluetooth portion
of the module.

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210712135919.32059-1-wens@kernel.org
2021-07-26 09:58:49 +02:00
Martin Blumenstingl
44cf630bcb ARM: dts: meson8: Use a higher default GPU clock frequency
We are seeing "imprecise external abort (0x1406)" errors during boot
(which then cause the whole board to hang) on Meson8 (but not Meson8m2).
These are observed while trying to access the GPU's registers when the
MALI clock is running at it's default setting of 24MHz. The 3.10 vendor
kernel uses 318.75MHz as "default" GPU frequency. Using that makes the
"imprecise external aborts" go away.
Add the assigned-clocks and assigned-clock-rates properties to also bump
the MALI clock to 318.75MHz before accessing any of it's registers.

Fixes: 7d3f6b536e ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Reported-by: Demetris Ierokipides <ierokipides.dem@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210711214023.2163565-1-martin.blumenstingl@googlemail.com
2021-07-26 09:58:29 +02:00
Jernej Skrabec
9d3ef21dca
arm64: dts: allwinner: h6: tanix-tx6: enable emmc
Tanix TX6 has 32 GiB eMMC. Add a node for it.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210722161220.51181-4-jernej.skrabec@gmail.com
2021-07-26 09:11:49 +02:00
Jernej Skrabec
35f2f8b802
arm64: dts: allwinner: h6: tanix-tx6: Add PIO power supplies
While there is no publicly available schematic of this board, it's not
hard to determine voltage of GPIO port C, D and G (only ones which can
be set).

Port C and G are used for MMC/SDIO communication, so they use 1.8 V
power supply. It's not clear if port D is even used, but if it is, it's
pretty safe to assume it uses 3.3 V power supply. Value read from PIO
Group Withstand Voltage Mode Select register from within pre-installed
Android agrees with that assesment.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210722161220.51181-3-jernej.skrabec@gmail.com
2021-07-26 09:11:45 +02:00
Jernej Skrabec
7ab1f65397
arm64: dts: allwinner: h6: tanix-tx6: Fix regulator node names
Regulator node names don't reflect class of the device. Fix that by
prefixing names with "regulator-".

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210722161220.51181-2-jernej.skrabec@gmail.com
2021-07-26 09:11:19 +02:00
gushengxian
fc520525c1 alpha: fix spelling mistakes
Fix some spelling mistakes in comments:
delarations ==> declarations
softare ==> software
suffiently ==> sufficiently
requred ==> required
unaliged ==> unaligned

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 22:33:04 -07:00
gushengxian
3e0c6d15ad alpha: Remove space between * and parameter name
'struct pcb_struct * pcb_va' should be 'struct pcb_struct *pcb_va'.

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 22:33:04 -07:00
Arnd Bergmann
ee3e9fa29e alpha: fp_emul: avoid init/cleanup_module names
This is one of the last modules using the old calling conventions
for module init/exit functions. Change it over to the style used
everywhere else.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 22:33:04 -07:00
He Zhe
15b9e38403 alpha: Add syscall_get_return_value()
audit now requires syscall_get_return_value instead of regs_return_value
to retrieve syscall return code . Other architectures that support audit
have already define this function.

Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 22:33:03 -07:00
David Hildenbrand
6208721f13 binfmt: remove support for em86 (alpha only)
We have a fairly specific alpha binary loader in Linux: running x86
(i386, i486) binaries via the em86 [1] emulator. As noted in the Kconfig
option, the same behavior can be achieved via binfmt_misc, for example,
more nowadays used for running qemu-user.

An example on how to get binfmt_misc running with em86 can be found in
Documentation/admin-guide/binfmt-misc.rst

The defconfig does not have CONFIG_BINFMT_EM86=y set. And doing a
	make defconfig && make olddefconfig
results in
	# CONFIG_BINFMT_EM86 is not set

... as we don't seem to have any supported Linux distirbution for alpha
anymore, there isn't really any "default" user of that feature anymore.

Searching for "CONFIG_BINFMT_EM86=y" reveals mostly discussions from
around 20 years ago, like [2] describing how to get netscape via em86
running via em86, or [3] discussing that running wine or installing
Win 3.11 through em86 would be a nice feature.

The latest binaries available for em86 are from 2000, version 2.2.1 [4] --
which translates to "unsupported"; further, em86 doesn't even work with
glibc-2.x but only with glibc-2.0 [4, 5]. These are clear signs that
there might not be too many em86 users out there, especially users
relying on modern Linux kernels.

Even though the code footprint is relatively small, let's just get rid
of this blast from the past that's effectively unused.

[1] http://ftp.dreamtime.org/pub/linux/Linux-Alpha/em86/v0.4/docs/em86.html
[2] https://static.lwn.net/1998/1119/a/alpha-netscape.html
[3] https://groups.google.com/g/linux.debian.alpha/c/AkGuQHeCe0Y
[4] http://zeniv.linux.org.uk/pub/linux/alpha/em86/v2.2-1/relnotes.2.2.1.html
[5] https://forum.teamspeak.com/archive/index.php/t-1477.html

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-api@vger.kernel.org
Cc: linux-alpha@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 22:33:03 -07:00
tangchunyou
8f34ed9d95 alpha: fix typos in a comment
"kerne" -> "kernel"

Signed-off-by: tangchunyou <tangchunyou@yulong.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 22:33:03 -07:00
Corentin Labbe
bfd736e3ff alpha: defconfig: add necessary configs for boot testing
Gentoo's KernelCI will soon boot test alpha kernel and we need
CONFIG_DEVTMPFS=y to be set for that.
Note that CONFIG_DEVTMPFS=y is already necessary for lot of other
distribution/tools like recent udev/systemd.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 22:33:03 -07:00
Prarit Bhargava
caace6ca4e alpha: Send stop IPI to send to online CPUs
This issue was noticed while debugging a shutdown issue where some
secondary CPUs are not being shutdown correctly.  A fix for that [1] requires
that secondary cpus be offlined using the cpu_online_mask so that the
stop operation is a no-op if CPU HOTPLUG is disabled.  I, like the author in
[1] looked at the architectures and found that alpha is one of two
architectures that executes smp_send_stop() on all possible CPUs.

On alpha, smp_send_stop() sends an IPI to all possible CPUs but only needs
to send them to online CPUs.

Send the stop IPI to only the online CPUs.

[1] https://lkml.org/lkml/2020/1/10/250

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 22:33:03 -07:00
Zheng Yongjun
f0443da1d8 alpha: convert comma to semicolon
Replace a comma between expression statements by a semicolon.

Fixes: cba1ec7e88 ("alpha: switch to generic kernel_thread()")
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 22:32:59 -07:00
Chen Li
5e3c3a0ae5 alpha: remove undef inline in compiler.h
since 889b3c1245, CONFIG_OPTIMIZE_INLINING
is removed entirely and inline is always defined to `inline __gnu_inline
__inline_maybe_unused notrace` in compiler_types.h

Besides, undef inline here also means it never use
__attribute__((__gnu_inline__)), so `extern inline` function can never
be defined header files, otherwise multiple definition errors will
happen, e.g. if multiple translation units use alpha/include/asm/pal.h
will report multiple definitions, because there are many extern inline
function definitions in this header.

``` c
extern inline TYPE NAME(void)					\
{								\
	register TYPE __r0 __asm__("$0");			\
	__asm__ __volatile__(					\
...
```

Ofc, it is also ok to remove `extern` in `extern inline` here, then all
of iso c99 and gnuc99/89 are ok, but there are also other alpha headers
have such function definitions.

Signed-off-by: chenli <chenli@uniontech.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 22:18:20 -07:00
Alexander A. Klimov
a09c33cbf3 alpha: Kconfig: Replace HTTP links with HTTPS ones
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 22:18:17 -07:00
Bjorn Andersson
d66cd5dea5 cpufreq: blacklist Qualcomm sc8180x in cpufreq-dt-platdev
The Qualcomm SC8180x platform uses the qcom-cpufreq-hw driver, so
it in the cpufreq-dt-platdev driver's blocklist.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-07-26 09:53:35 +05:30
Corentin Labbe
e4b016f4b4 alpha: __udiv_qrnnd should be exported
When building an alpha kernel with mpi set as module, I hit this build
error:
ERROR: "__udiv_qrnnd" [lib/mpi/mpi.ko] undefined!
make[2]: *** [scripts/Makefile.modpost:92: __modpost] Error 1
make[1]: *** [Makefile:1266: modules] Error 2

This is due to __udiv_qrnnd not exported.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
2021-07-25 20:55:40 -07:00
Eric Biggers
ba47b515f5 fscrypt: align Base64 encoding with RFC 4648 base64url
fscrypt uses a Base64 encoding to encode no-key filenames (the filenames
that are presented to userspace when a directory is listed without its
encryption key).  There are many variants of Base64, but the most common
ones are specified by RFC 4648.  fscrypt can't use the regular RFC 4648
"base64" variant because "base64" uses the '/' character, which isn't
allowed in filenames.  However, RFC 4648 also specifies a "base64url"
variant for use in URLs and filenames.  "base64url" is less common than
"base64", but it's still implemented in many programming libraries.

Unfortunately, what fscrypt actually uses is a custom Base64 variant
that differs from "base64url" in several ways:

- The binary data is divided into 6-bit chunks differently.

- Values 62 and 63 are encoded with '+' and ',' instead of '-' and '_'.

- '='-padding isn't used.  This isn't a problem per se, as the padding
  isn't technically necessary, and RFC 4648 doesn't strictly require it.
  But it needs to be properly documented.

There have been two attempts to copy the fscrypt Base64 code into lib/
(https://lkml.kernel.org/r/20200821182813.52570-6-jlayton@kernel.org and
https://lkml.kernel.org/r/20210716110428.9727-5-hare@suse.de), and both
have been caught up by the fscrypt Base64 variant being nonstandard and
not properly documented.  Also, the planned use of the fscrypt Base64
code in the CephFS storage back-end will prevent it from being changed
later (whereas currently it can still be changed), so we need to choose
an encoding that we're happy with before it's too late.

Therefore, switch the fscrypt Base64 variant to base64url, in order to
align more closely with RFC 4648 and other implementations and uses of
Base64.  However, I opted not to implement '='-padding, as '='-padding
adds complexity, is unnecessary, and isn't required by the RFC.

Link: https://lore.kernel.org/r/20210718000125.59701-1-ebiggers@kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2021-07-25 20:47:05 -07:00
Eric Biggers
e538b0985a fscrypt: remove mention of symlink st_size quirk from documentation
Now that the correct st_size is reported for encrypted symlinks on all
filesystems, update the documentation accordingly.

Link: https://lore.kernel.org/r/20210702065350.209646-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2021-07-25 20:01:07 -07:00
Eric Biggers
064c734986 ubifs: report correct st_size for encrypted symlinks
The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.

Fix this by calling fscrypt_symlink_getattr() after ubifs_getattr() for
encrypted symlinks.  This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).

For more details, see the commit which added fscrypt_symlink_getattr().

Fixes: ca7f85be8d ("ubifs: Add support for encrypted symlinks")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2021-07-25 20:01:07 -07:00
Eric Biggers
461b43a8f9 f2fs: report correct st_size for encrypted symlinks
The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.

Fix this by calling fscrypt_symlink_getattr() after f2fs_getattr() for
encrypted symlinks.  This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).

For more details, see the commit which added fscrypt_symlink_getattr().

Fixes: cbaf042a3c ("f2fs crypto: add symlink encryption")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2021-07-25 20:01:06 -07:00
Eric Biggers
8c4bca10ce ext4: report correct st_size for encrypted symlinks
The stat() family of syscalls report the wrong size for encrypted
symlinks, which has caused breakage in several userspace programs.

Fix this by calling fscrypt_symlink_getattr() after ext4_getattr() for
encrypted symlinks.  This function computes the correct size by reading
and decrypting the symlink target (if it's not already cached).

For more details, see the commit which added fscrypt_symlink_getattr().

Fixes: f348c25232 ("ext4 crypto: add symlink encryption")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2021-07-25 20:01:06 -07:00
Eric Biggers
d187605605 fscrypt: add fscrypt_symlink_getattr() for computing st_size
Add a helper function fscrypt_symlink_getattr() which will be called
from the various filesystems' ->getattr() methods to read and decrypt
the target of encrypted symlinks in order to report the correct st_size.

Detailed explanation:

As required by POSIX and as documented in various man pages, st_size for
a symlink is supposed to be the length of the symlink target.
Unfortunately, st_size has always been wrong for encrypted symlinks
because st_size is populated from i_size from disk, which intentionally
contains the length of the encrypted symlink target.  That's slightly
greater than the length of the decrypted symlink target (which is the
symlink target that userspace usually sees), and usually won't match the
length of the no-key encoded symlink target either.

This hadn't been fixed yet because reporting the correct st_size would
require reading the symlink target from disk and decrypting or encoding
it, which historically has been considered too heavyweight to do in
->getattr().  Also historically, the wrong st_size had only broken a
test (LTP lstat03) and there were no known complaints from real users.
(This is probably because the st_size of symlinks isn't used too often,
and when it is, typically it's for a hint for what buffer size to pass
to readlink() -- which a slightly-too-large size still works for.)

However, a couple things have changed now.  First, there have recently
been complaints about the current behavior from real users:

- Breakage in rpmbuild:
  https://github.com/rpm-software-management/rpm/issues/1682
  https://github.com/google/fscrypt/issues/305

- Breakage in toybox cpio:
  https://www.mail-archive.com/toybox@lists.landley.net/msg07193.html

- Breakage in libgit2: https://issuetracker.google.com/issues/189629152
  (on Android public issue tracker, requires login)

Second, we now cache decrypted symlink targets in ->i_link.  Therefore,
taking the performance hit of reading and decrypting the symlink target
in ->getattr() wouldn't be as big a deal as it used to be, since usually
it will just save having to do the same thing later.

Also note that eCryptfs ended up having to read and decrypt symlink
targets in ->getattr() as well, to fix this same issue; see
commit 3a60a1686f ("eCryptfs: Decrypt symlink target for stat size").

So, let's just bite the bullet, and read and decrypt the symlink target
in ->getattr() in order to report the correct st_size.  Add a function
fscrypt_symlink_getattr() which the filesystems will call to do this.

(Alternatively, we could store the decrypted size of symlinks on-disk.
But there isn't a great place to do so, and encryption is meant to hide
the original size to some extent; that property would be lost.)

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210702065350.209646-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2021-07-25 20:01:06 -07:00
Tim Harvey
108547fd85 dt-bindings: arm: imx: add imx8mm/imx8mn GW7902 support
The GW7902 is based on the i.MX 8M Mini / Nano SoC featuring:
 - LPDDR4 DRAM
 - eMMC FLASH
 - Gateworks System Controller
 - LTE CAT M1 modem
 - USB 2.0 HUB
 - M.2 Socket with USB2.0, PCIe, and dual-SIM
 - IMX8M FEC
 - PCIe based GbE
 - RS232/RS485/RS422 serial transceiver
 - GPS
 - CAN bus
 - WiFi / Bluetooth
 - MIPI header (DSI/CSI/GPIO/PWM/I2S)
 - PMIC

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-07-26 09:47:39 +08:00
Mauro Carvalho Chehab
5e36129f2b
regulator: hi6421v600: rename voltage range arrays
The arrays containing the regulator's voltage ranges are
currently named after the first ldo which uses such range.

However, it sounds a lot clearer if those are named with
the voltage range instead.

No functional changes.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/1bdff1d1f23753b69c8044160decfad1e8553d08.1627121912.git.mchehab+huawei@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-26 02:16:49 +01:00
Mark Brown
c20d7a9b02
Merge branch 'regulator-5.14' into regulator-5.15 2021-07-26 02:13:44 +01:00
Mauro Carvalho Chehab
ccb2a74eec
regulator: hi6421v600: use lowercase for ldo
As lowercase is generally preferred for node names, while it is
not too late, change the LDO DT properties to lower case.

Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/395510cffeb39aebd1763cc5de1cb00a2c40e461.1627121912.git.mchehab+huawei@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-26 01:27:12 +01:00
Dave Airlie
35482f9dc5 Linux 5.14-rc3
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmD95yIeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGqp0H/j/xHL20EHaUJOaV
 iJjnfGyjtnkLC5FCoV/q/v9sFuSW2p4W1nyF8/eIgVKObef94Mg4/xxaHQrWIM56
 cbzK9aIcD9InAuImJ6lju4fqjNmFrt2x7mhfzjPKqmhfINfZ5CohpLFN5XdOwzYC
 l+ZgmUUl7GLDAND2M6rtkc7AOk4qTyAySDvvPFELE/uNgV4EKaENSIWofHhEzW5v
 Yk+4agawaFTfa6H9+uMVYZBOcEKwheQ0E2tcOJvHJT8Mwm8MFoC/B7fLY5zxIdN2
 7A7r/7qbSQmSDSjOgwKS4ZOjom0xGSD+V+596SzET6jkbahR2HJ/mrFvmD7GNEoW
 OWJPjzI=
 =vzIM
 -----END PGP SIGNATURE-----

Backmerge tag 'v5.14-rc3' into drm-next

Linux 5.14-rc3

Daniel said we should pull the nouveau fix from fixes in here, probably
a good plan.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2021-07-26 09:27:59 +10:00
Randy Dunlap
9f66861181 m68k/coldfire: change pll var. to clk_pll
DEFINE_CLK() makes the variable name be clk_xyz, so variable
'pll' should instead be 'clk_pll'.

In file included from ../arch/m68k/coldfire/m525x.c:12:
../arch/m68k/coldfire/m525x.c:29:30: error: 'pll' undeclared here (not in a function)
   29 |  CLKDEV_INIT(NULL, "pll.0", &pll),
      |                              ^~~
../include/linux/clkdev.h:30:10: note: in definition of macro 'CLKDEV_INIT'
   30 |   .clk = c, \
      |          ^
In file included from ../arch/m68k/coldfire/m525x.c:21:
../arch/m68k/include/asm/mcfclk.h:43:27: warning: 'clk_pll' defined but not used [-Wunused-variable]
   43 |         static struct clk clk_##clk_ref = { \
      |                           ^~~~
../arch/m68k/coldfire/m525x.c:25:1: note: in expansion of macro 'DEFINE_CLK'
   25 | DEFINE_CLK(pll, "pll.0", MCF_CLK);
      | ^~~~~~~~~~

Fixes: 63aadb7766 ("m68k: coldfire: use clkdev_lookup on most coldfire")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: uclinux-dev@uclinux.org
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2021-07-26 08:41:38 +10:00
Linus Torvalds
ff1176468d Linux 5.14-rc3 v5.14-rc3 2021-07-25 15:35:14 -07:00
David S. Miller
832df96d5f Merge branch 'sctp-pmtu-probe'
Xin Long says:

====================
sctp: improve the pmtu probe in Search Complete state

Timo recently suggested to use the loss of (data) packets as
indication to send pmtu probe for Search Complete state, which
should also be implied by RFC8899. This patchset is to change
the current one that is doing probe with current pmtu all the
time.

v1->v2:
  - see Patch 2/2.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25 23:06:21 +01:00
Xin Long
eacf078cf4 sctp: send pmtu probe only if packet loss in Search Complete state
This patch is to introduce last_rtx_chunks into sctp_transport to detect
if there's any packet retransmission/loss happened by checking against
asoc's rtx_data_chunks in sctp_transport_pl_send().

If there is, namely, transport->last_rtx_chunks != asoc->rtx_data_chunks,
the pmtu probe will be sent out. Otherwise, increment the pl.raise_count
and return when it's in Search Complete state.

With this patch, if in Search Complete state, which is a long period, it
doesn't need to keep probing the current pmtu unless there's data packet
loss. This will save quite some traffic.

v1->v2:
  - add the missing Fixes tag.

Fixes: 0dac127c05 ("sctp: do black hole detection in search complete state")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25 23:06:02 +01:00
Xin Long
058e6e0ed0 sctp: improve the code for pmtu probe send and recv update
This patch does 3 things:

  - make sctp_transport_pl_send() and sctp_transport_pl_recv()
    return bool type to decide if more probe is needed to send.

  - pr_debug() only when probe is really needed to send.

  - count pl.raise_count in sctp_transport_pl_send() instead of
    sctp_transport_pl_recv(), and it's only incremented for the
    1st probe for the same size.

These are preparations for the next patch to make probes happen
only when there's packet loss in Search Complete state.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25 23:06:02 +01:00
Harshvardhan Jha
795e3d2ea6 net: qede: Fix end of loop tests for list_for_each_entry
The list_for_each_entry() iterator, "vlan" in this code, can never be
NULL so the warning will never be printed.

Signed-off-by: Harshvardhan Jha <harshvardhan.jha@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-25 23:02:45 +01:00
Hu Haowen
4a52225d61 docs/zh_CN: add a translation for index
The original file has added a former intro in commit b51208d41c
("docs: Tweak the top-level Sphinx page") and hence update the Chinese
version for it.

Signed-off-by: Hu Haowen <src.res@email.cn>
Link: https://lore.kernel.org/r/20210608075207.77812-1-src.res@email.cn
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-25 14:48:30 -06:00
Hannu Hartikainen
77167b966b docs: submitting-patches: clarify the role of LKML
The documentation previously stated that LKML should be used as *last
resort*. However, scripts/get_maintainer.pl always suggests it and in a
discussion about changing that[0] it turned out that LKML should in fact
receive all patches.

Update documentation to make it clear that all patches should be sent to
LKML by default, in addition to any subsystem-specific lists.

[0]: https://lore.kernel.org/lkml/19a701a8d5837088aa7d8ba594c228c0e040e747.camel@perches.com/

Signed-off-by: Hannu Hartikainen <hannu@hrtk.in>
Link: https://lore.kernel.org/r/20210707133634.286840-1-hannu@hrtk.in
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-25 14:45:43 -06:00
Yang Xu
d5caec394a admin-guide/cputopology.rst: Remove non-existed cpu-hotplug.txt
Since kernel commit ff58fa7f55 ("Documentation: Update CPU hotplug and move it to core-api"),
cpu_hotplug.txt has been removed. We should update it in here.

Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Link: https://lore.kernel.org/r/1624412269-13155-1-git-send-email-xuyang2018.jy@fujitsu.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-25 14:42:48 -06:00
Fabio M. De Francesco
ce48ee81a1 admin-guide/hw-vuln: Rephrase a section of core-scheduling.rst
Rephrase the "For MDS" section in core-scheduling.rst for the purpose of
making it clearer what is meant by "kernel memory is still considered
untrusted".

Suggested-by: Vineeth Pillai <Vineeth.Pillai@microsoft.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Joel Fernandes (Google) <joelaf@google.com>
Link: https://lore.kernel.org/r/20210721190250.26095-1-fmdefrancesco@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-25 14:39:17 -06:00
Mauro Carvalho Chehab
b426d9d78e docs: virt: kvm: api.rst: replace some characters
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.

Replace the occurences of the following characters:

	- U+00a0 (' '): NO-BREAK SPACE
	  as it can cause lines being truncated on PDF output

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ff70cb42d63f3a1da66af1b21b8d038418ed5189.1626947264.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-25 14:35:46 -06:00
Mauro Carvalho Chehab
dc9c31c3ff docs: firmware-guide: acpi: dsd: graph.rst: replace some characters
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.

Replace the occurences of the following characters:

	- U+00a0 (' '): NO-BREAK SPACE
	  as it can cause lines being truncated on PDF output

Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/a65b04a5cf341cff02d4b514dd4889b4fa4f94b8.1626947264.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-25 14:35:46 -06:00
Mauro Carvalho Chehab
f3fd34fe0e docs: sound: kernel-api: writing-an-alsa-driver.rst: replace some characters
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.

Replace the occurences of the following characters:

	- U+00a0 (' '): NO-BREAK SPACE
	  as it can cause lines being truncated on PDF output

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/21abe5fa495a05ac1f998ed66184a77e19ac89cc.1626947264.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-25 14:35:46 -06:00
Ioana Ciornei
662fa3d609 docs: networking: dpaa2: fix chapter title format
Fix the DPAA2 DPIO driver chapter title by adding the necessary
overline. Without this, the index page of the DPAA2 documentation
doesn't display properly.

Fixes: d8e516bac7 ("soc: fsl: dpio: Convert DPIO documentation to .rst")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210722100356.635078-5-ciorneiioana@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-25 14:34:33 -06:00
Ioana Ciornei
a9fd134be7 docs: kvm: properly format code blocks and lists
Add a '::' so that a code block is interpreted properly and also add a
blank line before the start of a list.

Fixes: fdc09ddd40 ("KVM: stats: Add documentation for binary statistics interface")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20210722100356.635078-4-ciorneiioana@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-25 14:34:33 -06:00
Ioana Ciornei
8b9671643d docs: kvm: fix build warnings
Fix some small build warnings. The title underline was too short in some
cases and a code block was not indented.

Documentation/virt/kvm/api.rst:7216: WARNING: Title underline too short.

Fixes: 6dba940352 ("KVM: x86: Introduce KVM_GET_SREGS2 / KVM_SET_SREGS2")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20210722100356.635078-3-ciorneiioana@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-25 14:34:33 -06:00
Ioana Ciornei
5b42d0bfb7 docs: printk-formats: fix build warning
Add an empty line after the '::' starting the code block so that the
following lines are properly interpreted.

Without this, the following build warnings are visible.

Documentation/core-api/printk-formats.rst:136: WARNING: Unexpected indentation.
Documentation/core-api/printk-formats.rst:137: WARNING: Block quote ends without a blank line; unexpected unindent.

Fixes: 9294523e37 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210722100356.635078-2-ciorneiioana@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-25 14:34:32 -06:00
Kees Cook
6ab0493dfc deprecated.rst: Include details on "no_hash_pointers"
Linus decided a debug toggle for %p was tolerable, so update the
%p deprecation documentation.

Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210723200526.3424128-1-keescook@chromium.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-07-25 14:30:55 -06:00