Commit graph

1,169,205 commits

Author SHA1 Message Date
Vasily Averin
990c74e3f4 memcg: enable accounting for inet_bin_bucket cache
net namespace can create up to 64K tcp and dccp ports and force kernel
to allocate up to several megabytes of memory per netns
for inet_bind_bucket objects.

It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 06:00:38 -07:00
Vasily Averin
6126891c6d memcg: enable accounting for IP address and routing-related objects
An netadmin inside container can use 'ip a a' and 'ip r a'
to assign a large number of ipv4/ipv6 addresses and routing entries
and force kernel to allocate megabytes of unaccounted memory
for long-lived per-netdevice related kernel objects:
'struct in_ifaddr', 'struct inet6_ifaddr', 'struct fib6_node',
'struct rt6_info', 'struct fib_rules' and ip_fib caches.

These objects can be manually removed, though usually they lives
in memory till destroy of its net namespace.

It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.

One of such objects is the 'struct fib6_node' mostly allocated in
net/ipv6/route.c::__ip6_ins_rt() inside the lock_bh()/unlock_bh() section:

 write_lock_bh(&table->tb6_lock);
 err = fib6_add(&table->tb6_root, rt, info, mxc);
 write_unlock_bh(&table->tb6_lock);

In this case it is not enough to simply add SLAB_ACCOUNT to corresponding
kmem cache. The proper memory cgroup still cannot be found due to the
incorrect 'in_interrupt()' check used in memcg_kmem_bypass().

Obsoleted in_interrupt() does not describe real execution context properly.
>From include/linux/preempt.h:

 The following macros are deprecated and should not be used in new code:
 in_interrupt()	- We're in NMI,IRQ,SoftIRQ context or have BH disabled

To verify the current execution context new macro should be used instead:
 in_task()	- We're in task context

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 06:00:38 -07:00
Vasily Averin
c948f51c16 memcg: enable accounting for net_device and Tx/Rx queues
Container netadmin can create a lot of fake net devices,
then create a new net namespace and repeat it again and again.
Net device can request the creation of up to 4096 tx and rx queues,
and force kernel to allocate up to several tens of megabytes memory
per net device.

It makes sense to account for them to restrict the host's memory
consumption from inside the memcg-limited container.

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 06:00:38 -07:00
David S. Miller
2967eed908 Merge branch 'bridge-vlan-multicast'
Nikolay Aleksandrov says:

====================
net: bridge: multicast: add vlan support

This patchset adds initial per-vlan multicast support, most of the code
deals with moving to multicast context pointers from bridge/port pointers.
That allows us to switch them with the per-vlan contexts when a multicast
packet is being processed and vlan multicast snooping has been enabled.
That is controlled by a global bridge option added in patch 06 which is
off by default (BR_BOOLOPT_MCAST_VLAN_SNOOPING). It is important to note
that this option can change only under RTNL and doesn't require
multicast_lock, so we need to be careful when retrieving mcast contexts
in parallel. For packet processing they are switched only once in
br_multicast_rcv() and then used until the packet has been processed.
For the most part we need these contexts only to read config values and
check if they are disabled. The global mcast state which is maintained
consists of querier and router timers, the rest are config options.
The port mcast state which is maintained consists of query timer and
link to router port list if it's ever marked as a router port. Port
multicast contexts _must_ be used only with their respective global
contexts, that is a bridge port's mcast context must be used only with
bridge's global mcast context and a vlan/port's mcast context must be
used only with that vlan's global mcast context due to the router port
lists. This way a bridge port can be marked as a router in multiple
vlans, but might not be a router in some other vlan. Also this allows us
to have per-vlan querier elections, per-vlan queries and basically the
whole multicast state becomes per-vlan when the option is enabled.
One of the hardest parts is synchronization with vlan's memory
management, that is done through a new vlan flag: BR_VLFLAG_MCAST_ENABLED
which is changed only under multicast_lock. When a vlan is being
destroyed first that flag is removed under the lock, then the multicast
context is torn down which includes waiting for any outstanding context
timers. Since all of the vlan processing depends on BR_VLFLAG_MCAST_ENABLED
it must be checked first if the contexts are vlan and the multicast_lock
has been acquired. That is done by all IGMP/MLD packet processing
functions and timers. When processing a packet we have RCU so the vlan
memory won't be freed, but if the flag is missing we must not process it.
The timers are synchronized in the same way with the addition of waiting
for them to finish in case they are running after removing the flag
under multicast_lock (i.e. they were waiting for the lock). Multicast vlan
snooping requires vlan filtering to be enabled, if it's disabled then
snooping gets automatically disabled, too. BR_VLFLAG_GLOBAL_MCAST_ENABLED
controls if a vlan has BR_VLFLAG_MCAST_ENABLED set which is used in all
vlan disabled checks. We need both flags because one is controlled by
user-space globally (BR_VLFLAG_GLOBAL_MCAST_ENABLED) and the other is
for a particular bridge/vlan or port/vlan entry (BR_VLFLAG_MCAST_ENABLED).
Since the latter is also used for synchronization between the multicast
and vlan code, and also controlled by BR_VLFLAG_GLOBAL_MCAST_ENABLED we
rely on it when checking if a vlan context is disabled. The multicast
fast-path has 3 new bit tests on the cache-hot bridge flags field, I
didn't observe any measurable difference. I haven't forced either
context options to be always disabled when the other type is enabled
because the state consists of timers which either expire (router) or
don't affect the normal operation. Some options, like the mcast querier
one, won't be allowed to change for the disabled context type, that will
come with a future patch-set which adds per-vlan querier control.

Another important addition is the global vlan options, so far we had
only per bridge/port vlan options but in order to control vlan multicast
snooping globally we need to add a new type of global vlan options.
They can be changed only on the bridge device and are dumped only when a
special flag is set in the dump request. The first global option is vlan
mcast snooping control, it controls the vlan BR_VLFLAG_GLOBAL_MCAST_ENABLED
private flag. It can be set only on master vlan entries. There will be
many more global vlan options in the future both for multicast config
and other per-vlan options (e.g. STP).

There's a lot of room for improvements, I'll do some of the initial
ones but splitting the state to different contexts opens the door
for a lot more. Also any new multicast options become vlan-supported with
very little to no effort by using the same contexts.

Short patch description:
  patches 01-04: initial mcast context add, no functional changes
  patch      05: adds vlan mcast init and control helpers and uses them on
                 vlan create/destroy
  patch      06: adds a global bridge mcast vlan snooping knob (default
                 off)
  patches 07-08: add a helper for users which must derive the contexts
                 based on current bridge and vlan options (e.g. timers)
  patch      09: adds checks for disabled vlan contexts in packet
                 processing and timers
  patch      10: adds support for per-vlan querier and tagged queries
  patch      11: adds router port vlan id in the notifications
  patches 12-14: add global vlan options support (change, dump, notify)
  patch      15: adds per-vlan global mcast snooping control

Future patch-sets which build on this one (in order):
 - vlan state mcast handling
 - user-space mdb contexts (currently only the bridge contexts are used
   there)
 - all bridge multicast config options added per-vlan global and per
   vlan/port
 - iproute2 support for all the new uAPIs
 - selftests

This set has been stress-tested (deleting/adding ports/vlans while changing
vlan mcast snooping while processing IGMP/MLD packets), and also has
passed all bridge self-tests. I'm sending this set as early as possible
since there're a few more related sets that should go in the same
release to get proper and full mcast vlan snooping support.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:29 -07:00
Nikolay Aleksandrov
9dee572c38 net: bridge: vlan: add mcast snooping control
Add a new global vlan option which controls whether multicast snooping
is enabled or disabled for a single vlan. It controls the vlan private
flag: BR_VLFLAG_GLOBAL_MCAST_ENABLED.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:20 -07:00
Nikolay Aleksandrov
9aba624d7c net: bridge: vlan: notify when global options change
Add support for global options notifications. They use only RTM_NEWVLAN
since global options can only be set and are contained in a separate
vlan global options attribute. Notifications are compressed in ranges
where possible, i.e. the sequential vlan options are equal.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:20 -07:00
Nikolay Aleksandrov
743a53d963 net: bridge: vlan: add support for dumping global vlan options
Add a new vlan options dump flag which causes only global vlan options
to be dumped. The dumps are done only with bridge devices, ports are
ignored. They support vlan compression if the options in sequential
vlans are equal (currently always true).

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:20 -07:00
Nikolay Aleksandrov
47ecd2dbd8 net: bridge: vlan: add support for global options
We can have two types of vlan options depending on context:
 - per-device vlan options (split in per-bridge and per-port)
 - global vlan options

The second type wasn't supported in the bridge until now, but we need
them for per-vlan multicast support, per-vlan STP support and other
options which require global vlan context. They are contained in the global
bridge vlan context even if the vlan is not configured on the bridge device
itself. This patch adds initial netlink attributes and support for setting
these global vlan options, they can only be set (RTM_NEWVLAN) and the
operation must use the bridge device. Since there are no such options yet
it shouldn't have any functional effect.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:20 -07:00
Nikolay Aleksandrov
1e9ca45662 net: bridge: multicast: include router port vlan id in notifications
Use the port multicast context to check if the router port is a vlan and
in case it is include its vlan id in the notification.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:20 -07:00
Nikolay Aleksandrov
615cc23e62 net: bridge: multicast: add vlan querier and query support
Add basic vlan context querier support, if the contexts passed to
multicast_alloc_query are vlan then the query will be tagged. Also
handle querier start/stop of vlan contexts.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:20 -07:00
Nikolay Aleksandrov
4cdd0d10f3 net: bridge: multicast: check if should use vlan mcast ctx
Add helpers which check if the current bridge/port multicast context
should be used (i.e. they're not disabled) and use them for Rx IGMP/MLD
processing, timers and new group addition. It is important for vlans to
disable processing of timer/packet after the multicast_lock is obtained
if the vlan context doesn't have BR_VLFLAG_MCAST_ENABLED. There are two
cases when that flag is missing:
 - if the vlan is getting destroyed it will be removed and timers will
   be stopped
 - if the vlan mcast snooping is being disabled

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:20 -07:00
Nikolay Aleksandrov
eb1593a0b4 net: bridge: multicast: use the port group to port context helper
We need to use the new port group to port context helper in places where
we cannot pass down the proper context (i.e. functions that can be
called by timers or outside the packet snooping paths).

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:20 -07:00
Nikolay Aleksandrov
74edfd483d net: bridge: multicast: add helper to get port mcast context from port group
Add br_multicast_pg_to_port_ctx() which returns the proper port multicast
context from either port or vlan based on bridge option and vlan flags.
As the comment inside explains the locking is a bit tricky, we rely on
the fact that BR_VLFLAG_MCAST_ENABLED requires multicast_lock to change
and we also require it to be held to call that helper. If we find the
vlan under rcu and it still has the flag then we can be sure it will be
alive until we unlock multicast_lock which should be enough.
Note that the context might change from vlan to bridge between different
calls to this helper as the mcast vlan knob requires only rtnl so it should
be used carefully and for read-only/check purposes.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:20 -07:00
Nikolay Aleksandrov
f4b7002a70 net: bridge: add vlan mcast snooping knob
Add a global knob that controls if vlan multicast snooping is enabled.
The proper contexts (vlan or bridge-wide) will be chosen based on the knob
when processing packets and changing bridge device state. Note that
vlans have their individual mcast snooping enabled by default, but this
knob is needed to turn on bridge vlan snooping. It is disabled by
default. To enable the knob vlan filtering must also be enabled, it
doesn't make sense to have vlan mcast snooping without vlan filtering
since that would lead to inconsistencies. Disabling vlan filtering will
also automatically disable vlan mcast snooping.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:20 -07:00
Nikolay Aleksandrov
7b54aaaf53 net: bridge: multicast: add vlan state initialization and control
Add helpers to enable/disable vlan multicast based on its flags, we need
two flags because we need to know if the vlan has multicast enabled
globally (user-controlled) and if it has it enabled on the specific device
(bridge or port). The new private vlan flags are:
 - BR_VLFLAG_MCAST_ENABLED: locally enabled multicast on the device, used
   when removing a vlan, toggling vlan mcast snooping and controlling
   single vlan (kernel-controlled, valid under RTNL and multicast_lock)
 - BR_VLFLAG_GLOBAL_MCAST_ENABLED: globally enabled multicast for the
   vlan, used to control the bridge-wide vlan mcast snooping for a
   single vlan (user-controlled, can be checked under any context)

Bridge vlan contexts are created with multicast snooping enabled by
default to be in line with the current bridge snooping defaults. In
order to actually activate per vlan snooping and context usage a
bridge-wide knob will be added later which will default to disabled.
If that knob is enabled then automatically all vlan snooping will be
enabled. All vlan contexts are initialized with the current bridge
multicast context defaults.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:19 -07:00
Nikolay Aleksandrov
613d61dbef net: bridge: vlan: add global and per-port multicast context
Add global and per-port vlan multicast context, only initialized but
still not used. No functional changes intended.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:19 -07:00
Nikolay Aleksandrov
adc47037a7 net: bridge: multicast: use multicast contexts instead of bridge or port
Pass multicast context pointers to multicast functions instead of bridge/port.
This would make it easier later to switch these contexts to their per-vlan
versions. The patch is basically search and replace, no functional changes.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:19 -07:00
Nikolay Aleksandrov
d3d065c003 net: bridge: multicast: factor out bridge multicast context
Factor out the bridge's global multicast context into a separate
structure which will later be used for per-vlan global context.
No functional changes intended.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:19 -07:00
Nikolay Aleksandrov
9632233e7d net: bridge: multicast: factor out port multicast context
Factor out the port's multicast context into a separate structure which
will later be shared for per-port,vlan context. No functional changes
intended. We need the structure even if bridge multicast is not defined
to pass down as pointer to forwarding functions.

Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20 05:41:19 -07:00
ChiYuan Huang
0555d41497
regulator: rtq2134: Add support for Richtek RTQ2134 SubPMIC
This adds support for Richtek RTQ2134 SubPMIC.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1626422636-29458-2-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-20 13:37:29 +01:00
ChiYuan Huang
4c922fd3d6
regulator: rtq2134: Add binding document for Richtek RTQ2134 SubPMIC
Add binding document for Richtek RTQ2134 SubPMIC.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1626422636-29458-1-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-20 13:37:28 +01:00
Pierre-Louis Bossart
1bd80ff2cf
ASOC: Intel: sof_sdw: add quirk for Intel 'Bishop County' NUC M15
The same quirk is used for LAPBC510 and LAPBC710 skews who use the
same audio design, with an RT711 headset codec using JD1 mode and one
RT1308 amplifier, along with 4 DMICs.

BugLink: https://github.com/thesofproject/linux/issues/3049
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210719233248.557923-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-20 13:35:11 +01:00
Alexandru Tachici
c45c1e82bb
spi: spi-bcm2835: Fix deadlock
The bcm2835_spi_transfer_one function can create a deadlock
if it is called while another thread already has the
CCF lock.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Fixes: f8043872e7 ("spi: add driver for BCM2835")
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210716210245.13240-2-alexandru.tachici@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-07-20 13:34:05 +01:00
Kurt Kanzenbach
edd2e9d586 Revert "igc: Export LEDs"
This reverts commit cf8331825a.

There are better Linux interfaces to export the different LED modes
and blinking reasons.

Revert this patch for now and come up with better solution later.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20210719101640.16047-1-kurt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20 13:53:59 +02:00
Ingo Molnar
ddab1e71d2 EFI fixes for v5.14-rc2:
- Ensure that memblock reservations and IO reserved resources remain in
 sync when using the EFI memreserve feature.
 - Don't complain about invalid TPM final event log table if it is
 missing altogether.
 - Comment header fix for the stub.
 - Avoid a spurious warning when attempting to reserve firmware memory
 that is already reserved in the first place.
 -----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE+9lifEBpyUIVN1cpw08iOZLZjyQFAmD2eyoACgkQw08iOZLZ
 jyRBaAv7BiERvRoBno0Np6jTf/YmC7Q6NG2Q6qqmL03bHb6FLgZXrYIdWnCv/gnO
 XKUKDDF0qoeuTB547GjXqSkOHbdwLD/crtxXNnjbpS/JQwdIkDtcR1QjRGTT0PIC
 YrYFXBvggvWFtNdCcVua5vWia11dsPsqlfUgPo+sG2oYtL7iL04XbxoKD2uSg7HF
 jt2uGu28zhHmqmHJhUUcTByhVjXWL5wzBmPtbxYWcCjnonBaaLxfjCW4tZVO1q18
 do+8/x/yC1uG4dadFEFL7kpHxIrvv54qV2GrUSuZAG1qmSDU7+aB6OyQ3ZOZ1lDr
 GnLueewUuIzS1tdJLF+drEnEjo3QS2LW4YukkwXbcj8VP898kLLHkWGQQmu7FPtn
 pgbwm4bnkGUS4om5l9N/ddf3r84Yco05pOKWLBAtUCFt8sDPAub0knuMlHaYyJsb
 CKpx7hbrSjCBeaEVxe/Wb9GmAVr/Qc2Dun7g/LYEdbPSELkz2/pxcLCSN5XgfUxA
 2Lpc44yL
 =ExSm
 -----END PGP SIGNATURE-----

Merge tag 'efi-urgent-for-v5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi into efi/urgent

Pull EFI fixes for v5.14-rc2 from Ard Biesheuvel:

" - Ensure that memblock reservations and IO reserved resources remain in
    sync when using the EFI memreserve feature.

  - Don't complain about invalid TPM final event log table if it is
    missing altogether.

  - Comment header fix for the stub.

  - Avoid a spurious warning when attempting to reserve firmware memory
    that is already reserved in the first place."

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-07-20 13:30:14 +02:00
Chanho Park
d64519249e phy: samsung-ufs: support exynosauto ufs phy driver
This patch adds to support phy-exynosautov9-ufs driver for ExynosAuto v9
series SoCs. The patch adds "samsung,exynosautov9-ufs-phy" compatible.
Unlike previous exynos ufs phy, the chip uses 0x50 offset as
PHY_TRSV_REG_CFG_OFFSET.

Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210709094524.110193-3-chanho61.park@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-20 16:43:10 +05:30
Chanho Park
b95637e2da phy: samsung-ufs: move phy-exynos7-ufs header
Instead of using exynos7 ufs definition in phy-exynos7-ufs.h, we should
put it into phy-exynos7-ufs.c to be included different objects or units.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210709094524.110193-2-chanho61.park@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-20 16:43:10 +05:30
Jakub Kicinski
97d0931f67 Merge branch 'net-hns3-fixes-for-net'
Guangbin Huang says:

====================
net: hns3: fixes for -net

This series includes some bugfixes for the HNS3 ethernet driver.
====================

Link: https://lore.kernel.org/r/1626685988-25869-1-git-send-email-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20 13:12:50 +02:00
Jian Shen
bbfd4506f9 net: hns3: fix rx VLAN offload state inconsistent issue
Currently, VF doesn't enable rx VLAN offload when initializating,
and PF does it for VFs. If user disable the rx VLAN offload for
VF with ethtool -K, and reload the VF driver, it may cause the
rx VLAN offload state being inconsistent between hardware and
software.

Fixes it by enabling rx VLAN offload when VF initializing.

Fixes: e2cb1dec97 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20 13:12:50 +02:00
Jian Shen
184cd221a8 net: hns3: disable port VLAN filter when support function level VLAN filter control
For hardware limitation, port VLAN filter is port level, and
effective for all the functions of the port. So if not support
port VLAN bypass, it's necessary to disable the port VLAN filter,
in order to support function level VLAN filter control.

Fixes: 2ba306627f ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20 13:12:49 +02:00
Peng Li
4671042f1e net: hns3: add match_id to check mailbox response from PF to VF
When VF need response from PF, VF will wait (1us - 1s) to receive
the response, or it will wait timeout and the VF action fails.
If VF do not receive response in 1st action because timeout,
the 2nd action may receive response for the 1st action, and get
incorrect response data.VF must reciveve the right response from
PF,or it will cause unexpected error.

This patch adds match_id to check mailbox response from PF to VF,
to make sure VF get the right response:
1. The message sent from VF was labelled with match_id which was a
unique 16-bit non-zero value.
2. The response sent from PF will label with match_id which got from
the request.
3. The VF uses the match_id to match request and response message.

This scheme depends on PF driver supports match_id, if PF driver doesn't
support then VF will uses the original scheme.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20 13:12:49 +02:00
Chengwen Feng
1b713d14dc net: hns3: fix possible mismatches resp of mailbox
Currently, the mailbox synchronous communication between VF and PF use
the following fields to maintain communication:
1. Origin_mbx_msg which was combined by message code and subcode, used
to match request and response.
2. Received_resp which means whether received response.

There may possible mismatches of the following situation:
1. VF sends message A with code=1 subcode=1.
2. PF was blocked about 500ms when processing the message A.
3. VF will detect message A timeout because it can't get the response
within 500ms.
4. VF sends message B with code=1 subcode=1 which equal message A.
5. PF processes the first message A and send the response message to
VF.
6. VF will identify the response matched the message B because the
code/subcode is the same. This will lead to mismatch of request and
response.

To fix the above bug, we use the following scheme:
1. The message sent from VF was labelled with match_id which was a
unique 16-bit non-zero value.
2. The response sent from PF will label with match_id which got from
the request.
3. The VF uses the match_id to match request and response message.

As for PF driver, it only needs to copy the match_id from request to
response.

Fixes: dde1a86e93 ("net: hns3: Add mailbox support to PF driver")
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20 13:12:48 +02:00
Vladimir Oltean
cbb56b03ec net: bridge: do not replay fdb entries pointing towards the bridge twice
This simple script:

ip link add br0 type bridge
ip link set swp2 master br0
ip link set br0 address 00:01:02:03:04:05
ip link del br0

produces this result on a DSA switch:

[  421.306399] br0: port 1(swp2) entered blocking state
[  421.311445] br0: port 1(swp2) entered disabled state
[  421.472553] device swp2 entered promiscuous mode
[  421.488986] device swp2 left promiscuous mode
[  421.493508] br0: port 1(swp2) entered disabled state
[  421.886107] sja1105 spi0.1: port 1 failed to delete 00:01:02:03:04:05 vid 1 from fdb: -ENOENT
[  421.894374] sja1105 spi0.1: port 1 failed to delete 00:01:02:03:04:05 vid 0 from fdb: -ENOENT
[  421.943982] br0: port 1(swp2) entered blocking state
[  421.949030] br0: port 1(swp2) entered disabled state
[  422.112504] device swp2 entered promiscuous mode

A very simplified view of what happens is:

(1) the bridge port is created, and the bridge device inherits its MAC
    address

(2) when joining, the bridge port (DSA) requests a replay of the
    addition of all FDB entries towards this bridge port and towards the
    bridge device itself. In fact, DSA calls br_fdb_replay() twice:

	br_fdb_replay(br, brport_dev);
	br_fdb_replay(br, br);

    DSA uses reference counting for the FDB entries. So the MAC address
    of the bridge is simply kept with refcount 2. When the bridge port
    leaves under normal circumstances, everything cancels out since the
    replay of the FDB entry deletion is also done twice per VLAN.

(3) when the bridge MAC address changes, switchdev is notified of the
    deletion of the old address and of the insertion of the new one.
    But the old address does not really go away, since it had refcount
    2, and the new address is added "only" with refcount 1.

(4) when the bridge port leaves now, it will replay a deletion of the
    FDB entries pointing towards the bridge twice. Then DSA will
    complain that it can't delete something that no longer exists.

It is clear that the problem is that the FDB entries towards the bridge
are replayed too many times, so let's fix that problem.

Fixes: 63c51453c8 ("net: dsa: replay the local bridge FDB entries pointing to the bridge dev too")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20210719093916.4099032-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20 13:08:45 +02:00
Guangming Cao
63c57e8dc7 dma_buf: remove dmabuf sysfs teardown before release
Dmabuf sysfs stat is used for dmabuf info track.
But these file maybe still in use after buffer released,
should clear it before buffer release.

Signed-off-by: Guangming Cao <Guangming.Cao@mediatek.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720103158.83439-1-guangming.cao@mediatek.com
Signed-off-by: Christian König <christian.koenig@amd.com>
2021-07-20 12:59:55 +02:00
Thomas Gleixner
ff5a6a3550 Merge branch 'timers/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/urgent
Pull dyntick fixes from Frederic Weisbecker:

  - Fix a rearm race in the posix cpu timer code
  - Handle get_next_timer_interrupt() correctly when no timers are pending

Link: https://lore.kernel.org/r/20210715104218.81276-1-frederic@kernel.org
2021-07-20 12:51:23 +02:00
Geert Uytterhoeven
057d445b9e dt-bindings: phy: Rename Intel Keem Bay USB PHY bindings
This is the only file not using the "intel,keembay-*" pattern.
Fortunately the actual compatible value is already following the
standard scheme.

Fixes: 4086afa2a1 ("dt-bindings: phy: Add Intel Keem Bay USB PHY bindings")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/91235a64185f7446fc58e638d77691078d3114d1.1626255556.git.geert+renesas@glider.be
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-20 16:12:03 +05:30
Bjorn Andersson
f839f14e24 phy: qcom-qmp: Add sc8180x PCIe support
The Qualcomm SC8180x platform has 4 PCIe controllers and PHYs, typically
used to connect things such as a modem or NVME storage device. Add the
programming sequence to get the PHYs up and running.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210629004509.1788286-2-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-20 16:04:39 +05:30
Bjorn Andersson
05d58bb656 dt-bindings: phy: qcom,qmp: Add sc8180x PCIe compatible
Add a compatible for the sc8180x PCIe PHY.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210629004509.1788286-1-bjorn.andersson@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-07-20 16:03:23 +05:30
Matthew Auld
aef7b67a79 drm/i915/uapi: convert drm_i915_gem_userptr to kernel doc
Add the missing kernel-doc.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-3-matthew.auld@intel.com
2021-07-20 11:25:06 +01:00
Matthew Auld
e7737b67ab drm/i915/uapi: reject caching ioctls for discrete
It's a noop on DG1, and in the future when need to support other devices
which let us control the coherency, then it should be an immutable
creation time property for the BO. This will likely be controlled
through a new gem_create_ext extension.

v2: add some kernel doc for the discrete changes, and document the
    implicit rules

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Jordan Justen <jordan.l.justen@intel.com>
Cc: Kenneth Graunke <kenneth@whitecape.org>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715101536.2606307-2-matthew.auld@intel.com
2021-07-20 11:24:37 +01:00
Landen Chao
6c2d125823 net: Update MAINTAINERS for MediaTek switch driver
Update maintainers for MediaTek switch driver with Deng Qingfang who has
contributed many high-quality patches (interrupt, VLAN, GPIO, and etc.)
and will help maintenance.

Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/49e1aa8aac58dcbf1b5e036d09b3fa3bbb1d94d0.1626751861.git.landen.chao@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20 12:24:02 +02:00
Eric Dumazet
e93abb840a net/tcp_fastopen: remove tcp_fastopen_ctx_lock
Remove the (per netns) spinlock in favor of xchg() atomic operations.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Link: https://lore.kernel.org/r/20210719101107.3203943-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20 12:07:07 +02:00
Eric Dumazet
749468760b net/tcp_fastopen: remove obsolete extern
After cited commit, sysctl_tcp_fastopen_blackhole_timeout is no longer
a global variable.

Fixes: 3733be14a3 ("ipv4: Namespaceify tcp_fastopen_blackhole_timeout knob")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Link: https://lore.kernel.org/r/20210719092028.3016745-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20 12:06:33 +02:00
Vasily Averin
2d85a1b31d ipv6: ip6_finish_output2: set sk into newly allocated nskb
skb_set_owner_w() should set sk not to old skb but to new nskb.

Fixes: 5796015fa9 ("ipv6: allocate enough headroom in ip6_finish_output2()")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Link: https://lore.kernel.org/r/70c0744f-89ae-1869-7e3e-4fa292158f4b@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20 11:52:36 +02:00
Yajun Deng
fef773fc81 netlink: Deal with ESRCH error in nlmsg_notify()
Yonghong Song report:
The bpf selftest tc_bpf failed with latest bpf-next.
The following is the command to run and the result:
$ ./test_progs -n 132
[   40.947571] bpf_testmod: loading out-of-tree module taints kernel.
test_tc_bpf:PASS:test_tc_bpf__open_and_load 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create(BPF_TC_INGRESS) 0 nsec
test_tc_bpf:PASS:bpf_tc_hook_create invalid hook.attach_point 0 nsec
test_tc_bpf_basic:PASS:bpf_obj_get_info_by_fd 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_attach replace mode 0 nsec
test_tc_bpf_basic:PASS:bpf_tc_query 0 nsec
test_tc_bpf_basic:PASS:handle set 0 nsec
test_tc_bpf_basic:PASS:priority set 0 nsec
test_tc_bpf_basic:PASS:prog_id set 0 nsec
libbpf: Kernel error message: Failed to send filter delete notification
test_tc_bpf_basic:FAIL:bpf_tc_detach unexpected error: -3 (errno 3)
test_tc_bpf:FAIL:test_tc_internal ingress unexpected error: -3 (errno 3)

The failure seems due to the commit
    cfdf0d9ae7 ("rtnetlink: use nlmsg_notify() in rtnetlink_send()")

Deal with ESRCH error in nlmsg_notify() even the report variable is zero.

Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20210719051816.11762-1-yajun.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-20 11:45:09 +02:00
Takashi Iwai
d371588910 ALSA: pcm: Fix mmap without buffer preallocation
The recent rewrite of the memory allocation helpers also changed the
page extraction to a common helper, snd_sgbuf_get_page().  But this
assumes implicitly that the buffer was allocated via the standard
helper (usually via preallocation), and didn't consider the case of
the manual buffer handling.

This patch fixes it and also covers the manual buffer management.

Fixes: 37af81c599 ("ALSA: core: Abstract memory alloc helpers")
Link: https://lore.kernel.org/r/20210720092732.12412-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-20 11:28:33 +02:00
Takashi Iwai
c4824ae7db ALSA: pcm: Fix mmap capability check
The hw_support_mmap() doesn't cover all memory allocation types and
might use a wrong device pointer for checking the capability.
Check the all memory allocation types more completely.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210720092640.12338-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-20 11:28:23 +02:00
Yang Yingliang
b46998d81a drm/bochs: Fix missing pci_disable_device() on error in bochs_pci_probe()
Replace pci_enable_device() with pcim_enable_device(),
pci_disable_device() will be called in release automatically.

v3:
  reformat commit message
  update for move to tiny/
v2:
  use pcim_enable_device()

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210715132845.2415619-1-yangyingliang@huawei.com
2021-07-20 11:19:57 +02:00
KuoHsiang Chou
f34bf652d6 drm/ast: Disable fast reset after DRAM initial
[Bug][AST2500]

V1:
When AST2500 acts as stand-alone VGA so that DRAM and DVO initialization
have to be achieved by VGA driver with P2A (PCI to AHB) enabling.
However, HW suggests disable Fast reset mode after DRAM initializaton,
because fast reset mode is mainly designed for ARM ICE debugger.
Once Fast reset is checked as enabling, WDT (Watch Dog Timer) should be
first enabled to avoid system deadlock before disable fast reset mode.

V2:
Use to_pci_dev() to get revision of PCI configuration.

V3:
If SCU00 is not unlocked, just enter its password again.
It is unnecessary to clear AHB lock condition and restore WDT default
setting again, before Fast-reset clearing.

V4:
repatch after "error : could not build fake ancestor" resolved.

V5:
Since CVE_2019_6260 item3, Most of AST2500 have disabled P2A(PCIe to AMBA).
However, for backward compatibility, some patches about P2A, such as items
of v5.2 and v5.3, are considered to be upstreamed with comments.
1. Add define macro to improve source readability.
ast_drv.h, ast_main.c, ast_post.c
2. Add comment about "Fast restet" is enabled for ARM-ICE debugger
ast_post.c
3. Add comment about Reset USB port to patch USB unknown device issue
ast_post.c

Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210709080900.4056-1-kuohsiang_chou@aspeedtech.com
2021-07-20 11:19:57 +02:00
Ainux.Wang
572994bf18 drm/ast: Zero is missing in detect function
The function ast_get_modes() will also return 0, when it try to get the
edid, but it also do not get the edid.

Signed-off-by: Ainux.Wang <ainux.wang@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210716015615.9150-1-ainux.wang@gmail.com
2021-07-20 11:19:57 +02:00