[why]
Pixel rate div depends on the type of encoder
that we are enabling stream with. If we swap between
HPO and DIO encoder at the time we call enable stream
for the new encoder, we must reprogram pixel rate div
based on the new encoder type.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why] dccg clock programming shouldn't be part of link hwss programming
sequence. The scope of link hwss is limited to encoder and phy
programming.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This function is meant to be used on multi-edp systems and only makes sense
if only links with connected panels are considered.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On some monitors we see a brief flash of corruption during the
monitor disable sequence caused by FIFO being disabled in the middle
of an active DP stream.
[How]
Wait until DP vid stream is disabled before turning off the FIFO.
The FIFO reset on DP unblank should take care of clearing any FIFO
error, if any.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN301 resource function is missing function pointer to
handle cases with unknown plane state.
This causes assertion when global state is validated while
using swizzle parameter as “DC_UNKNOWN”
[How]
Add function pointer to handle and patch cases when plane
state is unknown.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Swapnil Patel <Swapnil.Patel@amd.com>
Reviewed-by: Sung joon Kim <Sungjoon.Kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
- Proper phantom pipe disable sequence was missing in
commit_planes_for_stream
- If disabling phantom pipe, turn on phantom OTG first, and turn
off the phantom OTG after the plane is disabled
- Also update sequence for enabling / disabling phantom streams
(apply_ctx_to_hw). When enabling phantom pipes, enable before
doing front end programming for phantom pipes. If disabling
phantom pipes, disable after front end programming (i.e. after
phantom plane disable)
- TODO: Still need to properly handle transition case when a phantom
pipe is transitioned directly into a real pipe (need to fully disable
the phantom pipe first)
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
- Need error message when failing to allocating secure_display_ctx.
- Need to check if secure display context in psp is initialized or not
before using it.
[How]
- Add error message when memory allocation fail.
- Add check before accessing psp secure display context.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
SwathSizePerSurfaceY[] and SwathSizePerSurfaceC[] values are uninitialized
because we are using += instead of = operator.
[How]
Assign values in loop with = operator.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
multiple display hdcp are enabled within event_property_validate,
event_property_update by looping all displays on mst hub. when
one of display on mst hub in unplugged or disabled, hdcp are
disabled for all displays on mst hub within hdcp_reset_display
by looping all displays of mst link. for displays still active,
their encryption status are off. kernel driver will not run hdcp
authentication again. therefore, hdcp are not enabled automatically.
[How]
within is_content_protection_different, check drm_crtc_state changes
of all displays on mst hub, if need, triger hdcp_update_display to
re-run hdcp authentication.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows testing the driver without any VRAM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Centralize the limit handling and validation in one place instead
of spreading that around in different hw generations.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename vram_scratch into mem_scratch and allow allocating it into GTT as
well.
The only problem with that is that we won't have a default page for the
system aperture any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Technically all of those can use GTT as well, no need to force things
into VRAM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable VCN Dynamic Power Gating control for GC IP v11.0.4.
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1.Drop soft reset check when do should recover gpu check.
(As it will skip gpu reset operation if some ip is hang but
not support soft reset)
2.Check soft reset status before do soft reset when pre asic reset.
a. If check soft reset return true, it means: some ip is hang and
it also support soft reset, will try soft reset first.
b. If check soft reset return false, it means:
I. All the ip are not hang, will skip gpu reset.
II. Some ip is hang but not support soft reset, will skip soft
reset and retry with full reset later.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 4ef2774511 ("hwmon: (nct6775) Convert register access to
regmap API") fumbled the shifting & masking of the fan_div values such
that odd-numbered fan divisors would always be set to zero. Fix it so
that we actually OR in the bits we meant to.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes: 4ef2774511 ("hwmon: (nct6775) Convert register access to regmap API")
Cc: stable@kernel.org # v5.19+
Link: https://lore.kernel.org/r/20230102212857.5670-1-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
A user complained that the ftsteutates driver was displaying
bogus values since its introduction. This happens because the
sensor measurements need to be scaled in order to produce
meaningful results:
- the fan speed needs to be multiplied by 60 since its in RPS
- the temperature is in degrees celsius and needs an offset of 64
- the voltage is in 1/256 of 3.3V
The offical datasheet says the voltage needs to be divided by 256,
but this is likely an off-by-one-error, since even the BIOS
devides by 255 (otherwise 3.3V could not be measured).
The voltage channels additionally need a board-specific multiplier,
however this can be done by the driver since its board-specific.
The reason the missing scaling of measurements is the way Fujitsu
used this driver when it was still out-of-tree. Back then, all
scaling was done in userspace by libsensors, even the generic one.
Tested on a Fujitsu DS3401-B1.
Fixes: 08426eda58 ("hwmon: Add driver for FTS BMC chip "Teutates"")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20221224041855.83981-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ending up causing a lockup, and reduces the stack usage of some drm/mm
kunit tests.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCY7RAXgAKCRDj7w1vZxhR
xQzOAP47/85yztMznJ8dNiBuJB7EDhxjRdbyQUwu4sNTrZcdywD/VjNOmjBsjVhp
z6woBUs7Y6QVzMU50RNw6cM5WQaAoQ8=
=BXgq
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2023-01-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Maxime writes:
"The drm-misc-next-fixes leftovers. It addresses a bug in drm/scheduler
ending up causing a lockup, and reduces the stack usage of some drm/mm
kunit tests."
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230103144926.bmjjni3xnuis2jmq@houat
As v3d_submit_tfu_ioctl() performs the same steps as
drm_gem_object_lookup(), replace the open-code implementation in v3d
with its DRM core equivalent.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221227200010.191351-1-mcanal@igalia.com
Implement the core hooks in order to provide the softMAC layer support
for passive scans. Scans are requested by the user and can be aborted.
Changing channels manually is prohibited during scans.
The implementation uses a workqueue triggered at a certain interval
depending on the symbol duration for the current channel and the
duration order provided. More advanced drivers with internal scheduling
capabilities might require additional care but there is none mainline
yet.
Received beacons during a passive scan are processed in a work queue and
their result forwarded to the upper layer.
Active scanning is not supported yet.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-7-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The test case perf lock contention dumps core on s390. Run the following
commands:
# ./perf lock record -- ./perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 2.799 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.073 MB perf.data (100 samples) ]
#
# ./perf lock contention
Segmentation fault (core dumped)
#
The function call stack is lengthy, here are the top 5 functions:
# gdb ./perf core.24048
GNU gdb (GDB) Fedora Linux 12.1-6.fc37
Core was generated by `./perf lock contention'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
3356 machine->sched.text_end = kmap->unmap_ip(kmap, sym->start);
(gdb) where
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
#1 0x000000000109f244 in callchain_id (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:957
#2 0x000000000109e094 in get_key_by_aggr_mode (key=0x3ffea4f7290, addr=27758136, evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:586
#3 0x000000000109f4d0 in report_lock_contention_begin_event (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1004
#4 0x00000000010a00ae in evsel__process_contention_begin (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1254
#5 0x00000000010a0e14 in process_sample_event (tool=0x3ffea4f8480, event=0x3ff85601ef8, sample=0x3ffea4f77d0, evsel=0x30313e0, machine=0x3029e28) at builtin-lock.c:1464
.....
The issue is in function machine__is_lock_function() in file
./util/machine.c lines 3355:
/* should not fail from here */
sym = machine__find_kernel_symbol_by_name(machine, "__sched_text_end", &kmap);
machine->sched.text_end = kmap->unmap_ip(kmap, sym->start)
On s390 the symbol __sched_text_end is *NOT* in the symbol list and the
resulting pointer sym is set to NULL. The sym->start is then a NULL pointer
access and generates the core dump.
The reason why __sched_text_end is not in the symbol list on s390 is
simple:
When the symbol list is created at perf start up with function calls
dso__load
+--> dso__load_vmlinux_path
+--> dso__load_vmlinux
+--> dso__load_sym
+--> dso__load_sym_internal (reads kernel symbols)
+--> symbols__fixup_end
+--> symbols__fixup_duplicate
The issue is in function symbols__fixup_duplicate(). It deletes all
symbols with have the same address. On s390:
# nm -g ~/linux/vmlinux| fgrep c68390
0000000000c68390 T __cpuidle_text_start
0000000000c68390 T __sched_text_end
#
two symbols have identical addresses and __sched_text_end is considered
duplicate (in ascending sort order) and removed from the symbol list.
Therefore it is missing and an invalid pointer reference occurs. The
code checks for symbol __sched_text_start and when it exists assumes
symbol __sched_text_end is also in the symbol table. However this is not
the case on s390.
Same situation exists for symbol __lock_text_start:
0000000000c68770 T __cpuidle_text_end
0000000000c68770 T __lock_text_start
This symbol is also removed from the symbol table but used in function
machine__is_lock_function().
To fix this and keep duplicate symbols in the symbol table, set
symbol_conf.allow_aliases to true. This prevents the removal of
duplicate symbols in function symbols__fixup_duplicate().
Output After:
# ./perf lock contention
contended total wait max wait avg wait type caller
48 124.39 ms 123.99 ms 2.59 ms rwsem:W unlink_anon_vmas+0x24a
47 83.68 ms 83.26 ms 1.78 ms rwsem:W free_pgtables+0x132
5 41.22 us 10.55 us 8.24 us rwsem:W free_pgtables+0x140
4 40.12 us 20.55 us 10.03 us rwsem:W copy_process+0x1ac8
#
Fixes: 0d2997f750 ("perf lock: Look up callchain for the contended locks")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221230102627.2410847-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These have the exact same behavior as before, except they expect the
rtnl to be already taken (and will complain otherwise). This allows
performing MLME transmissions from different contexts.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The scan logic will bypass the whole ->set_channel() logic from the top
by calling the driver hook to just switch between channels when
required.
We can no longer rely on the "current" page/channel settings to set the
right symbol duration. Let's add these as new parameters to allow
providing the page/channel couple that we want.
There is no functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
This helper for now only checks if the page member and channel member
are valid (in the specification range) and supported (by checking the
device capabilities). Soon two new parameters will be introduced and
having this helper will let us only modify its content rather than
modifying the logic everywhere else in the subsystem.
There is not functional change.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-4-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
subdir is added to the OUTPUT which fails as part of building
install_headers when passed from "make -C tools perf_install".
Committer testing:
The original reporter (see the Link: below) had trouble with this:
$ make -C tools perf_install
That ended up with errors like this:
/var/home/acme/git/perf-urgent/tools/scripts/Makefile.include:17: *** output directory "/var/home/acme/git/perf-urgent/tools/perf/libperf/perf/" does not exist. Stop.
With this patch applied we now get it installed at:
INSTALL /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
As expected:
$ ls -la /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
-rw-r--r--. 1 acme acme 1146 Jan 3 15:42 /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
And if we clean tools with:
$ make -C tools clean
it gets cleaned up:
$ ls -la /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
ls: cannot access '/var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h': No such file or directory
$
Fixes: 746bd29e34 ("perf build: Use tools/lib headers from install path")
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/fa4b3115-d555-3d7f-54d1-018002e99350@secunet.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This definition will be used when adding support for scanning and defines
the content of a beacon frame header as in the 802.15.4 specification.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-3-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The ieee802154 layer should be able to scan a set of channels in order
to look for beacons advertizing PANs. Supporting this involves adding
two user commands: triggering scans and aborting scans. The user should
also be notified when a new beacon is received and also upon scan
termination.
A scan request structure is created to list the requirements and to be
accessed asynchronously when changing channels or receiving beacons.
Mac layers may now implement the ->trigger_scan() and ->abort_scan()
hooks.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20230103165644.432209-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
error is assigned first, so it does not need to initialize the
assignment.
Signed-off-by: Li zeming <zeming@nfschina.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The root inode number should be set to `breq->startino` for getting stat
information of the root when XFS_BULK_IREQ_SPECIAL_ROOT is used.
Otherwise, the inode search is started from 1
(XFS_BULK_IREQ_SPECIAL_ROOT) and the inode with the lowest number in a
filesystem is returned.
Fixes: bf3cb39447 ("xfs: allow single bulkstat of special inodes")
Signed-off-by: Hironori Shiina <shiina.hironori@fujitsu.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Lately I've been stress-testing extreme-sized rmap btrees by using the
(new) xfs_db bmap_inflate command to clone bmbt mappings billions of
times and then using xfs_repair to build new rmap and refcount btrees.
This of course is /much/ faster than actually FICLONEing a file billions
of times.
Unfortunately, xfs_repair fails in xfs_btree_bload_compute_geometry with
EOVERFLOW, which indicates that xfs_mount.m_rmap_maxlevels is not
sufficiently large for the test scenario. For a 1TB filesystem (~67
million AG blocks, 4 AGs) the btheight command reports:
$ xfs_db -c 'btheight -n 4400801200 -w min rmapbt' /dev/sda
rmapbt: worst case per 4096-byte block: 84 records (leaf) / 45 keyptrs (node)
level 0: 4400801200 records, 52390491 blocks
level 1: 52390491 records, 1164234 blocks
level 2: 1164234 records, 25872 blocks
level 3: 25872 records, 575 blocks
level 4: 575 records, 13 blocks
level 5: 13 records, 1 block
6 levels, 53581186 blocks total
The AG is sufficiently large to build this rmap btree. Unfortunately,
m_rmap_maxlevels is 5. Augmenting the loop in the space->height
function to report height, node blocks, and blocks remaining produces
this:
ht 1 node_blocks 45 blockleft 67108863
ht 2 node_blocks 2025 blockleft 67108818
ht 3 node_blocks 91125 blockleft 67106793
ht 4 node_blocks 4100625 blockleft 67015668
final height: 5
The goal of this function is to compute the maximum height btree that
can be stored in the given number of ondisk fsblocks. Starting with the
top level of the tree, each iteration through the loop adds the fanout
factor of the next level down until we run out of blocks. IOWs, maximum
height is achieved by using the smallest fanout factor that can apply
to that level.
However, the loop setup is not correct. Top level btree blocks are
allowed to contain fewer than minrecs items, so the computation is
incorrect because the first time through the loop it should be using a
fanout factor of 2. With this corrected, the above becomes:
ht 1 node_blocks 2 blockleft 67108863
ht 2 node_blocks 90 blockleft 67108861
ht 3 node_blocks 4050 blockleft 67108771
ht 4 node_blocks 182250 blockleft 67104721
ht 5 node_blocks 8201250 blockleft 66922471
final height: 6
Fixes: 9ec691205e ("xfs: compute the maximum height of the rmap btree when reflink enabled")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Since Tigerlake seems to have inherited its cstates and other RAPL power
caps from Icelake, assume it also follows Icelake for its RAPL events.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20221228113454.1199118-1-rodrigo.vivi@intel.com
Fix the following W=1 warnings:
arch/x86/lib/cmdline.c:
- Include <asm/cmdline.h> to fix missing-prototypes warnings.
- Update comment for __cmdline_find_option_bool to fix a kernel-doc warning.
Signed-off-by: Anuradha Weeraman <anuradha@debian.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230103114725.108431-1-anuradha@debian.org
Both <linux/mmiotrace.h> and <asm/insn-eval.h> define various MMIO_ enum constants,
whose namespace overlaps.
Rename the <asm/insn-eval.h> ones to have a INSN_ prefix, so that the headers can be
used from the same source file.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230101162910.710293-2-Jason@zx2c4.com
I225 have limitation when programming the BaseTime register which required
a power cycle of the controller. This limitation already lifted in I226.
This patch removes the restriction so that when user configure/remove any
TSN mode, it would not go into power cycle reset adapter.
How to test:
Schedule any gate control list configuration or delete it.
Example:
1)
BASE_TIME=$(date +%s%N)
tc qdisc replace dev $interface_name parent root handle 100 taprio \
num_tc 4 \
map 3 1 0 2 3 3 3 3 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 \
base-time $BASE_TIME \
sched-entry S 0F 1000000 \
flags 0x2
2) tc qdisc del dev $intername_name root
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Make reset task only executes for i225 and Qbv disabling to allow
i226 configure for 2nd GCL without resetting the adapter.
In i226, Tx won't hang if there is a GCL is already running, so in
this case we don't need to set FutScdDis bit.
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove the Qbv BaseTime restriction for I226 so that the BaseTime can be
scheduled to the future time. A new register bit of Tx Qav Control
(Bit-7: FutScdDis) was introduced to allow I226 scheduling future time as
Qbv BaseTime and not having the Tx hang timeout issue.
Besides, according to datasheet section 7.5.2.9.3.3, FutScdDis bit has to
be configured first before the cycle time and base time.
Indeed the FutScdDis bit is only active on re-configuration, thus we have
to set the BASET_L to zero and then only set it to the desired value.
Please also note that the Qbv configuration flow is moved around based on
the Qbv programming guideline that is documented in the latest datasheet.
Co-developed-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The variable becomes useless since we moved the snd_soc_jack
structure from a static array to sof_hdmi_pcm structure.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230103073704.722027-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With below two cases, it will cause NULL pointer dereference when
accessing SM_I(sbi)->fcc_info in f2fs_issue_flush().
a) If kthread_run() fails in f2fs_create_flush_cmd_control(), it will
release SM_I(sbi)->fcc_info,
- mount -o noflush_merge /dev/vda /mnt/f2fs
- mount -o remount,flush_merge /dev/vda /mnt/f2fs -- kthread_run() fails
- dd if=/dev/zero of=/mnt/f2fs/file bs=4k count=1 conv=fsync
b) we will never allocate memory for SM_I(sbi)->fcc_info w/ below
testcase,
- mount -o ro /dev/vda /mnt/f2fs
- mount -o rw,remount /dev/vda /mnt/f2fs
- dd if=/dev/zero of=/mnt/f2fs/file bs=4k count=1 conv=fsync
In order to fix this issue, let change as below:
- fix error path handling in f2fs_create_flush_cmd_control().
- allocate SM_I(sbi)->fcc_info even if readonly is on.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When unloading the SCMI core stack module, configured to use the virtio
SCMI transport, LOCKDEP reports the splat down below about unsafe locks
dependencies.
In order to avoid this possible unsafe locking scenario call upfront
virtio_break_device() before getting hold of vioch->lock.
=====================================================
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
6.1.0-00067-g6b934395ba07-dirty #4 Not tainted
-----------------------------------------------------
rmmod/307 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffff000080c510e0 (&dev->vqs_list_lock){+.+.}-{3:3}, at: virtio_break_device+0x28/0x68
and this task is already holding:
ffff00008288ada0 (&channels[i].lock){-.-.}-{3:3}, at: virtio_chan_free+0x60/0x168 [scmi_module]
which would create a new lock dependency:
(&channels[i].lock){-.-.}-{3:3} -> (&dev->vqs_list_lock){+.+.}-{3:3}
but this new dependency connects a HARDIRQ-irq-safe lock:
(&channels[i].lock){-.-.}-{3:3}
... which became HARDIRQ-irq-safe at:
lock_acquire+0x128/0x398
_raw_spin_lock_irqsave+0x78/0x140
scmi_vio_complete_cb+0xb4/0x3b8 [scmi_module]
vring_interrupt+0x84/0x120
vm_interrupt+0x94/0xe8
__handle_irq_event_percpu+0xb4/0x3d8
handle_irq_event_percpu+0x20/0x68
handle_irq_event+0x50/0xb0
handle_fasteoi_irq+0xac/0x138
generic_handle_domain_irq+0x34/0x50
gic_handle_irq+0xa0/0xd8
call_on_irq_stack+0x2c/0x54
do_interrupt_handler+0x8c/0x90
el1_interrupt+0x40/0x78
el1h_64_irq_handler+0x18/0x28
el1h_64_irq+0x64/0x68
_raw_write_unlock_irq+0x48/0x80
ep_start_scan+0xf0/0x128
do_epoll_wait+0x390/0x858
do_compat_epoll_pwait.part.34+0x1c/0xb8
__arm64_sys_epoll_pwait+0x80/0xd0
invoke_syscall+0x4c/0x110
el0_svc_common.constprop.3+0x98/0x120
do_el0_svc+0x34/0xd0
el0_svc+0x40/0x98
el0t_64_sync_handler+0x98/0xc0
el0t_64_sync+0x170/0x174
to a HARDIRQ-irq-unsafe lock:
(&dev->vqs_list_lock){+.+.}-{3:3}
... which became HARDIRQ-irq-unsafe at:
...
lock_acquire+0x128/0x398
_raw_spin_lock+0x58/0x70
__vring_new_virtqueue+0x130/0x1c0
vring_create_virtqueue+0xc4/0x2b8
vm_find_vqs+0x20c/0x430
init_vq+0x308/0x390
virtblk_probe+0x114/0x9b0
virtio_dev_probe+0x1a4/0x248
really_probe+0xc8/0x3a8
__driver_probe_device+0x84/0x190
driver_probe_device+0x44/0x110
__driver_attach+0x104/0x1e8
bus_for_each_dev+0x7c/0xd0
driver_attach+0x2c/0x38
bus_add_driver+0x1e4/0x258
driver_register+0x6c/0x128
register_virtio_driver+0x2c/0x48
virtio_blk_init+0x70/0xac
do_one_initcall+0x84/0x420
kernel_init_freeable+0x2d0/0x340
kernel_init+0x2c/0x138
ret_from_fork+0x10/0x20
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&dev->vqs_list_lock);
local_irq_disable();
lock(&channels[i].lock);
lock(&dev->vqs_list_lock);
<Interrupt>
lock(&channels[i].lock);
*** DEADLOCK ***
================
Fixes: 42e90eb53b ("firmware: arm_scmi: Add a virtio channel refcount")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222183823.518856-6-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
A misbheaving SCMI platform firmware could reply with out-of-spec
notifications, shorter than the mimimum size comprising a header.
Fixes: d5141f37c4 ("firmware: arm_scmi: Add notifications support in transport layer")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222183823.518856-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
A misbheaving SCMI platform firmware could reply with out-of-spec messages,
shorter than the mimimum size comprising a header and a status field.
Harden shmem_fetch_response to properly truncate such a bad messages.
Fixes: 5c8a47a5a9 ("firmware: arm_scmi: Make scmi core independent of the transport type")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222183823.518856-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Stale error status reported from a previous message transaction must be
cleared before starting a new transaction to avoid being confusingly
reported in the following SCMI message dump traces.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221222183823.518856-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
