We must properly handle an errors when we increase the rlimit counter
and the ucounts reference counter. We have to this with RCU protection
to prevent possible use-after-free that could occur due to concurrent
put_cred_rcu().
The following reproducer triggers the problem:
$ cat testcase.sh
case "${STEP:-0}" in
0)
ulimit -Si 1
ulimit -Hi 1
STEP=1 unshare -rU "$0"
killall sleep
;;
1)
for i in 1 2 3 4 5; do unshare -rU sleep 5 & done
;;
esac
with the KASAN report being along the lines of
BUG: KASAN: use-after-free in put_ucounts+0x17/0xa0
Write of size 4 at addr ffff8880045f031c by task swapper/2/0
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.13.0+ #19
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-alt4 04/01/2014
Call Trace:
<IRQ>
put_ucounts+0x17/0xa0
put_cred_rcu+0xd5/0x190
rcu_core+0x3bf/0xcb0
__do_softirq+0xe3/0x341
irq_exit_rcu+0xbe/0xe0
sysvec_apic_timer_interrupt+0x6a/0x90
</IRQ>
asm_sysvec_apic_timer_interrupt+0x12/0x20
default_idle_call+0x53/0x130
do_idle+0x311/0x3c0
cpu_startup_entry+0x14/0x20
secondary_startup_64_no_verify+0xc2/0xcb
Allocated by task 127:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7c/0x90
alloc_ucounts+0x169/0x2b0
set_cred_ucounts+0xbb/0x170
ksys_unshare+0x24c/0x4e0
__x64_sys_unshare+0x16/0x20
do_syscall_64+0x37/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 0:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xeb/0x120
kfree+0xaa/0x460
put_cred_rcu+0xd5/0x190
rcu_core+0x3bf/0xcb0
__do_softirq+0xe3/0x341
The buggy address belongs to the object at ffff8880045f0300
which belongs to the cache kmalloc-192 of size 192
The buggy address is located 28 bytes inside of
192-byte region [ffff8880045f0300, ffff8880045f03c0)
The buggy address belongs to the page:
page:000000008de0a388 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff8880045f0000 pfn:0x45f0
flags: 0x100000000000200(slab|node=0|zone=1)
raw: 0100000000000200 ffffea00000f4640 0000000a0000000a ffff888001042a00
raw: ffff8880045f0000 000000008010000d 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8880045f0200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8880045f0280: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8880045f0300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8880045f0380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff8880045f0400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
Fixes: d646969055 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we fail to return an error if the NFSv3 module failed to load
when we're trying to connect to a pNFS data server.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
After we grab the lock in nfs4_pnfs_ds_connect(), there is no check for
whether or not ds->ds_clp has already been initialised, so we can end up
adding the same transports multiple times.
Fixes: fc821d5920 ("pnfs/NFSv4.1: Add multipath capabilities to pNFS flexfiles servers over NFSv3")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cache the layout in the arguments so we don't have to keep looking it up
from the inode.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the layout gets invalidated, we should wait for any outstanding
layoutget requests for that layout to complete, and we should resend
them only after re-establishing the layout stateid.
Fixes: d29b468da4 ("pNFS/NFSv4: Improve rejection of out-of-order layouts")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we have multiple outstanding layoutget requests, the current code to
update the layout barrier assumes that the outstanding layout stateids
are updated in order. That's not necessarily the case.
Instead of using the value of lo->plh_outstanding as a guesstimate for
the window of values we need to accept, just wait to update the window
until we're processing the last one. The intention here is just to
ensure that we don't process 2^31 seqid updates without also updating
the barrier.
Fixes: 1bcf34fdac ("pNFS/NFSv4: Update the layout barrier when we schedule a layoutreturn")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Earlier commits refactored some NFS read code and removed
nfs_readpage_async(), but neglected to properly fixup
nfs_readpage_from_fscache_complete(). The code path is
only hit when something unusual occurs with the cachefiles
backing filesystem, such as an IO error or while a cookie
is being invalidated.
Mark page with PG_checked if fscache IO completes in error,
unlock the page, and let the VM decide to re-issue based on
PG_uptodate. When the VM reissues the readpage, PG_checked
allows us to skip over fscache and read from the server.
Link: https://marc.info/?l=linux-nfs&m=162498209518739
Fixes: 1e83b173b2 ("NFS: Add nfs_pageio_complete_read() and remove nfs_readpage_async()")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
A previous refactoring of nfs_readpage() might end up calling
wait_on_page_locked_killable() even if readpage_async_filler() failed
with an internal error and pg_error was non-zero (for example, if
nfs_create_request() failed). In the case of an internal error,
skip over wait_on_page_locked_killable() as this is only needed
when the read is sent and an error occurs during completion handling.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Once a transport has been put offline, this transport can be also
removed from the list of transports. Any tasks that have been stuck
on this transport would find the next available active transport
and be re-tried. This transport would be removed from the xprt_switch
list and freed.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In preparation of being able to change the xprt's state, add a way
to show currect state of the transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Once a task grabs a trasnport it's reflected in the queuelen of
the rpc_xprt structure. Add display of that value in the xprt's
info file in sysfs.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Allow to query xrpt_switch attributes. Currently showing the following
fields of the rpc_xprt_switch structure: xps_nxprts, xps_nactive,
xps_queuelen.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In preparation for when we can re-try a task on a different transport,
identify and mark such RPC tasks as moveable. Only 4.1+ operarations can
be re-tried on a different transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Allow to query transport's attributes. Currently showing following
fields of the rpc_xprt structure: state, last_used, cong, cwnd,
max_reqs, min_reqs, num_reqs, sizes of queues binding, sending,
pending, backlog.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Using sysfs's xprt_state attribute, mark a particular transport offline.
It will not be picked during the round-robin selection. It's not allowed
to take the main (1st created transport associated with the rpc_client)
offline. Also bring a transport back online via sysfs by writing "online"
and that would allow for this transport to be picked during the round-
robin selection.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Allow to query and set the destination's address of a transport.
Setting of the destination address is allowed only for TCP or RDMA
based connections.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Using TCP connection's source port it is useful to match connections
seen on the network traces to the xprts used by the linux nfs client.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Provide ability to query transport's source port.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Display in sysfs in the information about the xprt if this is a
main transport or not.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When an RPC client gets created it's first transport is special
and should be marked a main transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add individual transport directories under each transport switch
group. For instance, for each nconnect=X connections there will be
a transport directory. Naming conventions also identifies transport
type -- xprt-<id>-<type> where type is udp, tcp, rdma, local, bc.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
An rpc client uses a transport switch and one ore more transports
associated with that switch. Since transports are shared among
rpc clients, create a symlink into the xprt_switch directory
instead of duplicating entries under each rpc client.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add xprt_switch directory to the sysfs and create individual
xprt_swith subdirectories for multipath transport group.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We need to keep track of the type for a given transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This is used to uniquely identify sunrpc multipath objects in /sys.
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This adds a unique identifier for a sunrpc transport in sysfs, which is
similarly managed to the unique IDs of clients.
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
These will eventually have files placed under them for sysfs operations.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This is where we'll put per-rpc_client related files
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
All the proto-context stuff for context creation exists to allow older
userspace drivers to set VMs and engine sets via SET_CONTEXT_PARAM.
Drivers need to update to use CONTEXT_CREATE_EXT_* for this going
forward. Force the issue by blocking the old mechanism on any future
hardware generations.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Carl Zhang <carl.zhang@intel.com>
Cc: Michal Mrozek <michal.mrozek@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-31-jason@jlekstrand.net
Now that we have the whole engine set and VM at context creation time,
we can just assign those fields instead of creating first and handling
the VM and engines later. This lets us avoid creating useless VMs and
engine sets and lets us get rid of the complex VM setting code.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-30-jason@jlekstrand.net
We want to delete __assign_ppgtt and, generally, stop setting the VM
after context creation. This is the one place I could find in the
selftests where we set a VM after the fact.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-29-jason@jlekstrand.net
This better models where we want to go with contexts in general where
things like the VM and engine set are create parameters instead of being
set after the fact.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-28-jason@jlekstrand.net
When the APIs were added to manage the engine set on a GEM context
directly from userspace, the questionable choice was made to allow
changing the engine set on a context at any time. This is horribly racy
and there's absolutely no reason why any userspace would want to do this
outside of trying to exercise interesting race conditions. By removing
support for CONTEXT_PARAM_ENGINES from ctx_setparam, we make it
impossible to change the engine set after the context has been fully
created.
This doesn't yet let us delete all the deferred engine clean-up code as
that's still used for handling the case where the client dies or calls
GEM_CONTEXT_DESTROY while work is in flight. However, moving to an API
where the engine set is effectively immutable gives us more options to
potentially clean that code up a bit going forward. It also removes a
whole class of ways in which a client can hurt itself or try to get
around kernel context banning.
v2 (Jason Ekstrand):
- Expand the commit mesage
v3 (Jason Ekstrand):
- Make it more obvious that I915_CONTEXT_PARAM_ENGINES returns -EINVAL
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-27-jason@jlekstrand.net
When the APIs were added to manage VMs more directly from userspace, the
questionable choice was made to allow changing out the VM on a context
at any time. This is horribly racy and there's absolutely no reason why
any userspace would want to do this outside of testing that exact race.
By removing support for CONTEXT_PARAM_VM from ctx_setparam, we make it
impossible to change out the VM after the context has been fully
created. This lets us delete a bunch of deferred task code as well as a
duplicated (and slightly different) copy of the code which programs the
PPGTT registers.
v2 (Jason Ekstrand):
- Expand the commit message
v3 (Daniel Vetter):
- Don't drop the __rcu on the vm pointer
v4 (Jason Ekstrand):
- Make it more obvious that I915_CONTEXT_PARAM_VM returns -EINVAL
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-26-jason@jlekstrand.net
The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM. The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE. Currently, everything settable via one is
settable via the other. While some params are fairly simple and setting
them on a live context is harmless such as the context priority, others
are far trickier such as the VM or the set of engines. In order to swap
out the VM, for instance, we have to delay until all current in-flight
work is complete, swap in the new VM, and then continue. This leads to
a plethora of potential race conditions we'd really rather avoid.
In previous patches, we added a i915_gem_proto_context struct which is
capable of storing and tracking all such create parameters. This commit
delays the creation of the actual context until after the client is done
configuring it with SET_CONTEXT_PARAM. From the perspective of the
client, it has the same u32 context ID the whole time. From the
perspective of i915, however, it's an i915_gem_proto_context right up
until the point where we attempt to do something which the proto-context
can't handle. Then the real context gets created.
This is accomplished via a little xarray dance. When GEM_CONTEXT_CREATE
is called, we create a proto-context, reserve a slot in context_xa but
leave it NULL, the proto-context in the corresponding slot in
proto_context_xa. Then, whenever we go to look up a context, we first
check context_xa. If it's there, we return the i915_gem_context and
we're done. If it's not, we look in proto_context_xa and, if we find it
there, we create the actual context and kill the proto-context.
In order for this dance to work properly, everything which ever touches
a proto-context is guarded by drm_i915_file_private::proto_context_lock,
including context creation. Yes, this means context creation now takes
a giant global lock but it can't really be helped and that should never
be on any driver's fast-path anyway.
v2 (Daniel Vetter):
- Commit message grammatical fixes.
- Use WARN_ON instead of GEM_BUG_ON
- Rename lazy_create_context_locked to finalize_create_context_locked
- Rework the control-flow logic in the setparam ioctl
- Better documentation all around
v3 (kernel test robot):
- Make finalize_create_context_locked static
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-25-jason@jlekstrand.net
There's a big comment saying how useful it is but no one is using this
for anything anymore.
It was added in 2bfa996e03 ("drm/i915: Store owning file on the
i915_address_space") and used for debugfs at the time as well as telling
the difference between the global GTT and a PPGTT. In f6e8aa3871
("drm/i915: Report the number of closed vma held by each context in
debugfs") we removed one use of it by switching to a context walk and
comparing with the VM in the context. Finally, VM stats for debugfs
were entirely nuked in db80a1294c ("drm/i915/gem: Remove per-client
stats from debugfs/i915_gem_objects")
v2 (Daniel Vetter):
- Delete a struct drm_i915_file_private pre-declaration
- Add a comment to the commit message about history
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-24-jason@jlekstrand.net
We're about to start doing lazy context creation which means contexts
get created in i915_gem_context_lookup and we may start having more
errors than -ENOENT.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-23-jason@jlekstrand.net
This means that the proto-context needs to grow support for engine
configuration information as well as setparam logic. Fortunately, we'll
be deleting a lot of setparam logic on the primary context shortly so it
will hopefully balance out.
There's an extra bit of fun here when it comes to setting SSEU and the
way it interacts with PARAM_ENGINES. Unfortunately, thanks to
SET_CONTEXT_PARAM and not being allowed to pick the order in which we
handle certain parameters, we have think about those interactions.
v2 (Daniel Vetter):
- Add a proto_context_free_user_engines helper
- Comment on SSEU in the commit message
- Use proto_context_set_persistence in set_proto_ctx_param
v3 (Daniel Vetter):
- Fix a doc comment
- Do an explicit HAS_FULL_PPGTT check in set_proto_ctx_vm instead of
relying on pc->vm != NULL.
- Handle errors for CONTEXT_PARAM_PERSISTENCE
- Don't allow more resetting user engines
- Rework initialization of UCONTEXT_PERSISTENCE
v4 (Jason Ekstrand):
- Move hand-rolled initialization of UCONTEXT_PERSISTENCE to an
earlier patch
v5 (Jason Ekstrand):
- Move proto_context_set_persistence to this patch
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-22-jason@jlekstrand.net
What we really want to check is that size of the engines array, i.e.
args->size - sizeof(*user) is divisible by the element size, i.e.
sizeof(*user->engines) because that's what's required for computing the
array length right below the check. However, we're currently not doing
this and instead doing a compile-time check that sizeof(*user) is
divisible by sizeof(*user->engines) and avoiding the subtraction. As
far as I can tell, the only reason for the more confusing pair of checks
is to avoid a single subtraction of a constant.
The other thing the BUILD_BUG_ON might be trying to implicitly check is
that offsetof(user->engines) == sizeof(*user) and we don't have any
weird padding throwing us off. However, that's not the check it's doing
and it's not even a reliable way to do that check.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-21-jason@jlekstrand.net
This is the VM equivalent of i915_gem_context_lookup. It's only used
once in this patch but future patches will need to duplicate this lookup
code so it's better to have it in a helper.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-20-jason@jlekstrand.net
For now this is a no-op because everyone passes in a null SSEU but it
lets us get some of the error handling and selftest refactoring plumbed
through.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-19-jason@jlekstrand.net
The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM. The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE. Currently, everything settable via one is
settable via the other. While some params are fairly simple and setting
them on a live context is harmless such the context priority, others are
far trickier such as the VM or the set of engines. In order to swap out
the VM, for instance, we have to delay until all current in-flight work
is complete, swap in the new VM, and then continue. This leads to a
plethora of potential race conditions we'd really rather avoid.
Unfortunately, both methods of setting the VM and the engine set are in
active use today so we can't simply disallow setting the VM or engine
set vial SET_CONTEXT_PARAM. In order to work around this wart, this
commit adds a proto-context struct which contains all the context create
parameters.
v2 (Daniel Vetter):
- Better commit message
- Use __set/clear_bit instead of set/clear_bit because there's no race
and we don't need the atomics
v3 (Daniel Vetter):
- Use manual bitops and BIT() instead of __set_bit
v4 (Daniel Vetter):
- Add a changelog to the commit message
- Better hyperlinking in docs
- Create the default PPGTT in i915_gem_create_context
v5 (Daniel Vetter):
- Hand-roll the initialization of UCONTEXT_PERSISTENCE
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-17-jason@jlekstrand.net
In order to prevent kernel doc warnings, also fill out docs for any
missing fields and fix those that forgot the "@".
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-16-jason@jlekstrand.net
With the proto-context stuff added later in this series, we end up
having to duplicate set_priority. This lets us avoid duplicating the
validation logic.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-15-jason@jlekstrand.net
As far as I can tell, the only real reason for this is to avoid taking a
reference to the i915_gem_context. The cost of those two atomics
probably pales in comparison to the cost of the ioctl itself so we're
really not buying ourselves anything here. We're about to make context
lookup a tiny bit more complicated, so let's get rid of the one hand-
rolled case.
Some usermode drivers such as our Vulkan driver call GET_RESET_STATS on
every execbuf so the perf here could theoretically be an issue. If this
ever does become a performance issue for any such userspace drivers,
they can use set CONTEXT_PARAM_RECOVERABLE to false and look for -EIO
coming from execbuf to check for hangs instead.
v2 (Daniel Vetter):
- Add a comment in the commit message about recoverable contexts
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-14-jason@jlekstrand.net