Having a bigger number of FIFO lines held after vsync is only useful to
SoCs using AFBC to give time to the AFBC decoder to be reset, configured
and enabled again.
For SoCs not using AFBC this, on the contrary, is causing on some
displays issues and a few pixels vertical offset in the displayed image.
Conditionally increase the number of lines held after vsync only for
SoCs using AFBC, leaving the default value for all the others.
Fixes: 24e0d4058e ("drm/meson: hold 32 lines after vsync to give time for AFBC start")
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
[narmstrong: added fixes tag]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216-afbc_s905x-v1-0-033bebf780d9@baylibre.com
The node names should be generic and DT schema expects certain pattern:
amlogic/meson-sm1-bananapi-m5.dtb: leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221125144141.477253-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The node names should be generic and DT schema expects certain pattern:
meson8-minix-neo-x8.dtb: gpio-leds: 'blue' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221125144120.476933-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
'slab_early_init' was introduced by 'commit e0a4272679
("[PATCH] mm/slab.c: fix early init assumption")', this
flag was used to prevent off-slab caches being created
so early during bootup.
The only user of 'slab_early_init' was removed in 'commit
3217fd9bdf ("mm/slab: make criteria for off slab
determination robust and simple")'.
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
drain_freelist() can be called with a very large number of slabs to free,
such as for kmem_cache_shrink(), or depending on various settings of the
slab cache when doing periodic reaping.
If there is a potentially long list of slabs to drain, periodically
schedule to ensure we aren't saturating the cpu for too long.
Signed-off-by: David Rientjes <rientjes@google.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
As documented in Documentation/filesystems/sysfs.rst the sysfs show()
function should use sysfs_emit() or sysfs_emit_at() to format the
userspace return value. This replaces all sysfs related instances of
sprintf() with sysfs_emit() in the power-supply subsystem.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
[Drop sysfs_emit changes done for code not related to sysfs show
and reword commit message]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
As documented in Documentation/filesystems/sysfs.rst the sysfs
show() function should use sysfs_emit() or sysfs_emit_at() to
format the userspace return value. This replaces all instances
of scnprintf() with sysfs_emit() in the power-supply subsystem.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
[reword commit message]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If kernel_recvmsg() return -EAGAIN in ksmbd_tcp_readv() and go round
again, It will cause infinite loop issue. And all threads from next
connections would be doing that. This patch add max retry count(2) to
avoid it. kernel_recvmsg() will wait during 7sec timeout and try to
retry two time if -EAGAIN is returned. And add flags of kvmalloc to
__GFP_NOWARN and __GFP_NORETRY to disconnect immediately without
retrying on memory alloation failure.
Fixes: 0626e6641f ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18259
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
"nt_len - CIFS_ENCPWD_SIZE" is passed directly from
ksmbd_decode_ntlmssp_auth_blob to ksmbd_auth_ntlmv2. Malicious requests
can set nt_len to less than CIFS_ENCPWD_SIZE, which results in a negative
number (or large unsigned value) used for a subsequent memcpy in
ksmbd_auth_ntlvm2 and can cause a panic.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: William Liu <will@willsroot.io>
Signed-off-by: Hrvoje Mišetić <misetichrvoje@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, smb2_tree_connect doesn't send an error response packet on
error.
This causes libsmb2 to skip the specific error code and fail with the
following:
smb2_service failed with : Failed to parse fixed part of command
payload. Unexpected size of Error reply. Expected 9, got 8
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the user's login time is newer than the cache's timestamp,
we expect the cache may be stale and need to clear.
The stale cache will remain in the list's tail if no other
users operate on that inode.
Once the user accesses the inode, the stale cache will be
returned in rcu path.
Signed-off-by: Chengen Du <chengen.du@canonical.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
I've gotten very little use out of these debug messages, and I'm not
aware of anyone else having used them.
Indeed, sprinkling pr_debug around is not really a best practice these
days, especially for filesystem code. Tracepoints are used instead.
Let's just remove these and start from a clean slate.
This change does not affect info, warning, and error messages.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221215060420.60692-1-ebiggers@kernel.org
fsverity_operations::write_merkle_tree_block is passed the index of the
block to write and the log base 2 of the block size. However, all
implementations of it use these parameters only to calculate the
position and the size of the block, in bytes.
Therefore, make ->write_merkle_tree_block take 'pos' and 'size'
parameters instead of 'index' and 'log_blocksize'.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20221214224304.145712-5-ebiggers@kernel.org
Make fsverity_cleanup_inode() an inline function that checks for
non-NULL ->i_verity_info, then (if needed) calls
__fsverity_cleanup_inode() to do the real work. This reduces the
overhead on non-verity files.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20221214224304.145712-4-ebiggers@kernel.org
Make fsverity_prepare_setattr() an inline function that does the
IS_VERITY() check, then (if needed) calls __fsverity_prepare_setattr()
to do the real work. This reduces the overhead on non-verity files.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20221214224304.145712-3-ebiggers@kernel.org
Make fsverity_file_open() an inline function that does the IS_VERITY()
check, then (if needed) calls __fsverity_file_open() to do the real
work. This reduces the overhead on non-verity files.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20221214224304.145712-2-ebiggers@kernel.org
These indices should reference the ID placed within the dai_driver
array, not the indices of the array itself.
This fixes commit 4ff028f6c1 ("ASoC: qcom: lpass-cpu: Make I2S SD
lines configurable"), which among others, broke IPQ8064 audio
(sound/soc/qcom/lpass-ipq806x.c) because it uses ID 4 but we'd stop
initializing the mi2s_playback_sd_mode and mi2s_capture_sd_mode arrays
at ID 0.
Fixes: 4ff028f6c1 ("ASoC: qcom: lpass-cpu: Make I2S SD lines configurable")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231061545.2110253-1-computersforpeace@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
-----BEGIN PGP SIGNATURE-----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=M9iU
-----END PGP SIGNATURE-----
Merge tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced by a
function in the .text section
-----BEGIN PGP SIGNATURE-----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=ZQnP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Two fixes to correct how kprobes handles INT3 now that they're added
by other functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced
by a function in the .text section
* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
x86/calldepth: Fix incorrect init section references
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early
-----BEGIN PGP SIGNATURE-----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=0nPr
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter:
"I'm just back from the mountains, and Dave is out at the beach and
should be back in a week again. Just i915 fixes and since Rodrigo
bothered to make the pull last week I figured I should warm up gpg and
forward this in a nice signed tag as a new years present!
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early"
* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
drm/i915/uc: Fix two issues with over-size firmware files
drm/i915: improve the catch-all evict to handle lock contention
drm/i915: Remove __maybe_unused from mtl_info
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
As stated in marvell-orion-mdio.txt deleted in commit 0781434af8
("dt-bindings: net: orion-mdio: Convert to JSON schema") if
'interrupts' property is present, width of 'reg' should be 0x84.
Otherwise, width of 'reg' should be 0x4. Fix 'examples:' and add
constraints checking whether 'interrupts' property is present
and validate it against fixed values in reg.
Signed-off-by: Michał Grzelak <mig@semihalf.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This property has always been supported by the Linux driver; see
commit 9f93ac8d40 ("net-next: stmmac: Add dwmac-sun8i"). In fact, the
original driver submission includes the phy-supply code but no mention
of it in the binding, so the omission appears to be accidental. In
addition, the property is documented in the binding for the previous
hardware generation, allwinner,sun7i-a20-gmac.
Document phy-supply in the binding to fix devicetree validation for the
25+ boards that already use this property.
Fixes: 0441bde003 ("dt-bindings: net-next: Add DT bindings documentation for Allwinner dwmac-sun8i")
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is now possible for a system to have more than 32 endpoints. As
a result, registers related to endpoint suspend are parameterized,
with 32 endpoints represented in one more registers.
In ipa_interrupt_suspend_control(), the IPA_SUSPEND_EN register
offset is determined properly, but the bit mask used still assumes
the number of enpoints won't exceed 32. This is a bug. Fix it.
Fixes: f298ba785e ("net: ipa: add a parameter to suspend registers")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Po-Hsu Lin says:
====================
selftests: net: fix for arp_ndisc_evict_nocarrier test
This patchset will fix a false-positive issue caused by the command in
cleanup_v6() of the arp_ndisc_evict_nocarrier test.
Also, it will make the test to return a non-zero value for any failure
reported in the test for us to avoid false-negative results.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Return non-zero return value if there is any failure reported in this
script during the test. Otherwise it can only reflect the status of
the last command.
Fixes: f86ca07eb5 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit
with 255 (No such file or directory), even the tests are good:
# selftests: net: arp_ndisc_evict_nocarrier.sh
# run arp_evict_nocarrier=1 test
# RTNETLINK answers: File exists
# ok
# run arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run all.arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run ndisc_evict_nocarrier=1 test
# ok
# run ndisc_evict_nocarrier=0 test
# ok
# run all.ndisc_evict_nocarrier=0 test
# ok
not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255
This is because it's trying to modify the parameter for ipv4 instead.
Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and
run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect
this fact in cleanup_v6().
Fixes: f86ca07eb5 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that phylink no longer calls phy_get_rate_matching with
PHY_INTERFACE_MODE_NA, phys no longer need to support it. Remove the
documentation mandating support.
Fixes: 7642cc28fd ("net: phylink: fix PHY validation with rate adaption")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christian Marangi says:
====================
net: dsa: qca8k: multiple fix on mdio read/write
Due to some problems in reading the Documentation and elaborating it
some wrong assumption were done. The error was reported and notice only
now due to how things are setup in the code flow.
First 2 patch fix mgmt eth where the lenght calculation is very
confusing and in step of word size. (the related commit description have
an extensive description about how this mess works)
Last 3 patch revert the broken mdio cache and apply a correct version
that should still save some extra mdio in phy poll secnario.
These 5 patch fix each related problem and apply what the Documentation
actually say.
Changes v2:
- Add cover letter
- Fix typo in revert patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Improve mdio master read/write by using singe mii read/write lo/hi.
In a read and write we need to poll the mdio master regs in a busy loop
to check for a specific bit present in the upper half of the reg. We can
ignore the other half since it won't contain useful data. This will save
an additional useless read for each read and write operation.
In a read operation the returned data is present in the mdio master reg
lower half. We can ignore the other half since it won't contain useful
data. This will save an additional useless read for each read operation.
In a read operation it's needed to just set the hi half of the mdio
master reg as the lo half will be replaced by the result. This will save
an additional useless write for each read operation.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It may be useful to read/write just the lo or hi half of a reg.
This is especially useful for phy poll with the use of mdio master.
The mdio master reg is composed by the first 16 bit related to setup and
the other half with the returned data or data to write.
Refactor the mii function to permit single mii read/write of lo or hi
half of the reg.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 2481d206fa.
The Documentation is very confusing about the topic.
The cache logic for hi and lo is wrong and actually miss some regs to be
actually written.
What the Documentation actually intended was that it's possible to skip
writing hi OR lo if half of the reg is not needed to be written or read.
Revert the change in favor of a better and correct implementation.
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
It was discovered that MGMT_DATA2 can contain up to 28 bytes of data
instead of the 12 bytes written in the Documentation by accounting the
limit of 16 bytes declared in Documentation subtracting the first 4 byte
in the packet header.
Update the define with the real world value.
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: c2ee8181fd ("net: dsa: tag_qca: add define for handling mgmt Ethernet packet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
The assumption that Documentation was right about how this value work was
wrong. It was discovered that the length value of the mgmt header is in
step of word size.
As an example to process 4 byte of data the correct length to set is 2.
To process 8 byte 4, 12 byte 6, 16 byte 8...
Odd values will always return the next size on the ack packet.
(length of 3 (6 byte) will always return 8 bytes of data)
This means that a value of 15 (0xf) actually means reading/writing 32 bytes
of data instead of 16 bytes. This behaviour is totally absent and not
documented in the switch Documentation.
In fact from Documentation the max value that mgmt eth can process is
16 byte of data while in reality it can process 32 bytes at once.
To handle this we always round up the length after deviding it for word
size. We check if the result is odd and we round another time to align
to what the switch will provide in the ack packet.
The workaround for the length limit of 15 is still needed as the length
reg max value is 0xf(15)
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Tested-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: 90386223f4 ("net: dsa: qca8k: add support for larger read/write size with mgmt Ethernet")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when modifying DC, we validate max_rd_atomic user attribute
against the RC cap, validate against DC. RC and DC QP types have different
device limitations.
This can cause userspace created DC QPs to malfunction.
Fixes: c32a4f296e ("IB/mlx5: Add support for DC Initiator QP")
Link: https://lore.kernel.org/r/0c5aee72cea188c3bb770f4207cce7abc9b6fc74.1672231736.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Currently, when mlx5_ib_get_hw_stats() is used for device (port_num = 0),
there is a special handling in order to use the correct counters, but,
port_num is being passed down the stack without any change. Also, some
functions assume that port_num >=1. As a result, the following oops can
occur.
BUG: unable to handle page fault for address: ffff89510294f1a8
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] SMP
CPU: 8 PID: 1382 Comm: devlink Tainted: G W 6.1.0-rc4_for_upstream_base_2022_11_10_16_12 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock+0xc/0x20
Call Trace:
<TASK>
mlx5_ib_get_native_port_mdev+0x73/0xe0 [mlx5_ib]
do_get_hw_stats.constprop.0+0x109/0x160 [mlx5_ib]
mlx5_ib_get_hw_stats+0xad/0x180 [mlx5_ib]
ib_setup_device_attrs+0xf0/0x290 [ib_core]
ib_register_device+0x3bb/0x510 [ib_core]
? atomic_notifier_chain_register+0x67/0x80
__mlx5_ib_add+0x2b/0x80 [mlx5_ib]
mlx5r_probe+0xb8/0x150 [mlx5_ib]
? auxiliary_match_id+0x6a/0x90
auxiliary_bus_probe+0x3c/0x70
? driver_sysfs_add+0x6b/0x90
really_probe+0xcd/0x380
__driver_probe_device+0x80/0x170
driver_probe_device+0x1e/0x90
__device_attach_driver+0x7d/0x100
? driver_allows_async_probing+0x60/0x60
? driver_allows_async_probing+0x60/0x60
bus_for_each_drv+0x7b/0xc0
__device_attach+0xbc/0x200
bus_probe_device+0x87/0xa0
device_add+0x404/0x940
? dev_set_name+0x53/0x70
__auxiliary_device_add+0x43/0x60
add_adev+0x99/0xe0 [mlx5_core]
mlx5_attach_device+0xc8/0x120 [mlx5_core]
mlx5_load_one_devl_locked+0xb2/0xe0 [mlx5_core]
devlink_reload+0x133/0x250
devlink_nl_cmd_reload+0x480/0x570
? devlink_nl_pre_doit+0x44/0x2b0
genl_family_rcv_msg_doit.isra.0+0xc2/0x110
genl_rcv_msg+0x180/0x2b0
? devlink_nl_cmd_region_read_dumpit+0x540/0x540
? devlink_reload+0x250/0x250
? devlink_put+0x50/0x50
? genl_family_rcv_msg_doit.isra.0+0x110/0x110
netlink_rcv_skb+0x54/0x100
genl_rcv+0x24/0x40
netlink_unicast+0x1f6/0x2c0
netlink_sendmsg+0x237/0x490
sock_sendmsg+0x33/0x40
__sys_sendto+0x103/0x160
? handle_mm_fault+0x10e/0x290
? do_user_addr_fault+0x1c0/0x5f0
__x64_sys_sendto+0x25/0x30
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fix it by setting port_num to 1 in order to get device status and remove
unused variable.
Fixes: aac4492ef2 ("IB/mlx5: Update counter implementation for dual port RoCE")
Link: https://lore.kernel.org/r/98b82994c3cd3fa593b8a75ed3f3901e208beb0f.1672231736.git.leonro@nvidia.com
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There is no need to exclusively set the .owner member of the struct
device_driver when defining the platform_driver struct. The Linux core
takes care of setting the .owner member as part of the call to
module_platform_driver() helper function.
Issue identified using the platform_no_drv_owner.cocci Coccinelle
semantic patch.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is no need to exclusively set the .owner member of the struct
device_driver when defining the platform_driver struct. The Linux core
takes care of setting the .owner member as part of the call to
module_platform_driver() helper function.
Issue identified using the platform_no_drv_owner.cocci Coccinelle
semantic patch.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When the LCDIF block signals a panic condition due to the display FIFO
falling below the threshold, the priority at the NoC level is boosted
to the value set in the LCDIF_ARCACHE_CTRL register of i.MX8MP mediamix
blk-ctrl. Same as all other blk-ctrl registers this register is reset
when the domain is powered down. Initialize the panic hurry levels for
both LCIF interfaces to the maximium priority (same as downstream TF-A
and proven to work with the other priorities set in the interconnect
driver) when coming back from power down.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DT nodes for the Hantro VPU found in i.MX8MP SoC.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is an SPBA bus on AIPS3 which includes ecspi1-3,
UART1-3, and Flexcan1-2 according to the TRM.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
dt_binding_check detects an issue with the pgc_hsiomix power
domain:
pgc: 'power-domains@17' does not match any of the regexes
This is because 'power-domains' should be 'power-domain'
Fixes: 2ae42e0c0b ("arm64: dts: imx8mp: add HSIO power-domains")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GPC node references an interrupt parent, but it doesn't
state the interrupt itself. According to the TRM, this IRQ
is 87. This also eliminate an error detected from dt_binding_check
Fixes: fc0f051246 ("arm64: dts: imx8mp: add GPC node with GPU power domains")
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c
in Linux kernel does not use it, the property contains duplicate array entries
in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get
rid of that optional property altogether.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Drop "interrupt-names" property, since it is broken. The drivers/dma/mxs-dma.c
in Linux kernel does not use it, the property contains duplicate array entries
in existing DTs, and even malformed entries (gmpi, should have been gpmi). Get
rid of that optional property altogether.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
