When the Get Device Flags command fails, it returns the error status
with the parameters filled with the garbage values. Although the
parameters are not used, it is better to fill with zero than the random
values.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Disable duplicates filter when scanning for advertisement monitor for
the following reasons. The scanning includes active scan and passive
scan.
For HW pattern filtering (ex. MSFT), Realtek and Qualcomm controllers
ignore RSSI_Sampling_Period when the duplicates filter is enabled.
For SW pattern filtering, when we're not doing interleaved scanning, it
is necessary to disable duplicates filter, otherwise hosts can only
receive one advertisement and it's impossible to know if a peer is still
in range.
Signed-off-by: Yun-Hao Chung <howardchung@chromium.org>
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Manish Mandlik <mmandlik@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When using controller based address resolution, then the destination
address type during le_conn_complete uses 0x02 & 0x03 if controller
resolves the destination address(RPA).
These address types need to be converted back into either 0x00 0r 0x01
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Because mSBC frames do not need to be aligned to the SCO packet
boundary. Using USB ALT 3 let HCI payload >= 60 bytes, let mSBC
data satisfy 60 Bytes avoid payload unaligned situation and fixed
some headset no voise issue.
USB Alt 3 supported also need HFP support transparent MTU in 72 Bytes.
Signed-off-by: Hilda Wu <hildawu@realtek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The use of l2cap_chan_del is not safe under a loop using
list_for_each_entry.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The use of l2cap_chan_del is not safe under a loop using
list_for_each_entry.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Even with rate limited reporting this is very spammy and since
it is remote device that is providing bogus data there is no
need to report this as error.
Since real_len variable was used only to allow conditional error
message it is now also removed.
[72454.143336] bt_err_ratelimited: 10 callbacks suppressed
[72454.143337] Bluetooth: hci0: advertising data len corrected
[72454.296314] Bluetooth: hci0: advertising data len corrected
[72454.892329] Bluetooth: hci0: advertising data len corrected
[72455.051319] Bluetooth: hci0: advertising data len corrected
[72455.357326] Bluetooth: hci0: advertising data len corrected
[72455.663295] Bluetooth: hci0: advertising data len corrected
[72455.787278] Bluetooth: hci0: advertising data len corrected
[72455.942278] Bluetooth: hci0: advertising data len corrected
[72456.094276] Bluetooth: hci0: advertising data len corrected
[72456.249137] Bluetooth: hci0: advertising data len corrected
[72459.416333] bt_err_ratelimited: 13 callbacks suppressed
[72459.416334] Bluetooth: hci0: advertising data len corrected
[72459.721334] Bluetooth: hci0: advertising data len corrected
[72460.011317] Bluetooth: hci0: advertising data len corrected
[72460.327171] Bluetooth: hci0: advertising data len corrected
[72460.638294] Bluetooth: hci0: advertising data len corrected
[72460.946350] Bluetooth: hci0: advertising data len corrected
[72461.225320] Bluetooth: hci0: advertising data len corrected
[72461.690322] Bluetooth: hci0: advertising data len corrected
[72462.118318] Bluetooth: hci0: advertising data len corrected
[72462.427319] Bluetooth: hci0: advertising data len corrected
[72464.546319] bt_err_ratelimited: 7 callbacks suppressed
[72464.546319] Bluetooth: hci0: advertising data len corrected
[72464.857318] Bluetooth: hci0: advertising data len corrected
[72465.163332] Bluetooth: hci0: advertising data len corrected
[72465.278331] Bluetooth: hci0: advertising data len corrected
[72465.432323] Bluetooth: hci0: advertising data len corrected
[72465.891334] Bluetooth: hci0: advertising data len corrected
[72466.045334] Bluetooth: hci0: advertising data len corrected
[72466.197321] Bluetooth: hci0: advertising data len corrected
[72466.340318] Bluetooth: hci0: advertising data len corrected
[72466.498335] Bluetooth: hci0: advertising data len corrected
[72469.803299] bt_err_ratelimited: 10 callbacks suppressed
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=203753
Cc: stable@vger.kernel.org
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch enables regulators and gpios for the Qualcomm Bluetooth wcn6750
controller.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Moved extracting rom version info to common place as this code is
common in all if else ladder in qca_uart_setup.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
1. Added support to download firmware image with mbn type for wcn6750
as it supports mbn type image.
2. If mbn type image is not present then check for tlv type image.
3. Added debug logs for mbn type image.
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Added regulators,GPIOs and changes required to power on/off wcn6750.
Added support for firmware download for wcn6750.
Changes done in detail:
1. Added regulators and corresponding current values.
2. Added sw_ctrl GPIO pin which is output from BT SoC and indicates
status of clock supply to BT SoC.
3. Added inline function to check if the SoC type is wcn6750.
4. Modified the function qca_wcn3990_init() to support wcn6750 and
renamed it to qca_regulator_init().
Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch adds the device ID for the BCM43430B0 module, found e.g. in
certain revisions of AMPAK AP6212 chip. The required firmware file is
named 'BCM43430B0.hcd'.
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
During command status or command complete event, the controller may set
ncmd=0 indicating that it is not accepting any more commands. In such a
case, host holds off sending any more commands to the controller. If the
controller doesn't recover from such condition, host will wait forever,
until the user decides that the Bluetooth is broken and may power cycles
the Bluetooth.
This patch triggers the hardware error to reset the controller and
driver when it gets into such state as there is no other wat out.
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Manish Mandlik <mmandlik@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In qca_power_shutdown() qcadev local variable is
initialized by hu->serdev.dev private data, but
hu->serdev can be NULL and there is a check for it.
Since, qcadev is not used before
if (!hu->serdev)
return;
we can move its initialization after this "if" to
prevent GPF.
Fixes: 5559904ccc ("Bluetooth: hci_qca: Add QCA Rome power off support to the qca_power_shutdown()")
Cc: stable@vger.kernel.org # v5.6+
Cc: Rocky Liao <rjliao@codeaurora.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
0x2B, 0x31 and 0x33 are reserved for future use but were not present in
the HCI to MGMT conversion table, this caused the conversion to be
incorrect for the HCI status code greater than 0x2A.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Signed-off-by: Yu Liu <yudiliu@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When cmtp_attach_device fails, cmtp_add_connection returns the error value
which leads to the caller to doing fput through sockfd_put. But
cmtp_session kthread, which is stopped in this path will also call fput,
leading to a potential refcount underflow or a use-after-free.
Add a refcount before we signal the kthread to stop. The kthread will try
to grab the cmtp_session_sem mutex before doing the fput, which is held
when get_file is called, so there should be no races there.
Reported-by: Ryota Shiga
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
If btusb_mtk_submit_wmt_recv_urb returns error, wc should be freed and
then error should be returned to prevent memory leak.
Addresses-Coverity: ("Prevent memory leak")
Fixes: 4cbb375e997d ("Bluetooth: btusb: Fixed too many in-token issue for Mediatek Chip.")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The call to alloc_skb with the GFP_KERNEL flag can return a null sk_buff
pointer, so add a null check to avoid any null pointer deference issues.
Addresses-Coverity: ("Dereference null return value")
Fixes: afd2daa26c ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When an MGMT_EV_DEVICE_CONNECTED event is reported back to the user
space we will set the flags to tell if the established connection is
outbound or not. This is useful for the user space to log better metrics
and error messages.
Reviewed-by: Miao-chen Chou <mcchou@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Yu Liu <yudiliu@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Fix the following coccicheck warning:
net/bluetooth/msft.c:37:6-13: WARNING use flexible-array member instead
net/bluetooth/msft.c:42:6-10: WARNING use flexible-array member instead
net/bluetooth/msft.c:52:6-10: WARNING use flexible-array member instead
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
- Put an fwnode in the errorpath in the SGPIO driver
- Fix the number of GPIO lines per bank in the STM32 driver
-----BEGIN PGP SIGNATURE-----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=ZJ4G
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Two last-minute fixes:
- Put an fwnode in the errorpath in the SGPIO driver
- Fix the number of GPIO lines per bank in the STM32 driver"
* tag 'pinctrl-v5.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: stm32: fix the reported number of GPIO lines per bank
pinctrl: microchip-sgpio: Put fwnode in error case during ->probe()
Enable and disable osnoise/timerlat thread during on CPU hotplug online
and offline operations respectivelly.
Link: https://lore.kernel.org/linux-doc/20210621134636.5b332226@oasis.local.home/
Link: https://lkml.kernel.org/r/39f98590b3caeb3c32f09526214058efe0e9272a.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Enable and disable hwlat thread during cpu hotplug online
and offline operations, respectivelly.
Link: https://lore.kernel.org/linux-doc/20210621134636.5b332226@oasis.local.home/
Link: https://lkml.kernel.org/r/52012d25ea35491a0f8088b947864d8df8e25157.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In preparation to the hotplug support, protect kdata->kthread
with get/put_online_cpus() to avoid concurrency with hotplug
operations.
Link: https://lore.kernel.org/linux-doc/20210621134636.5b332226@oasis.local.home/
Link: https://lkml.kernel.org/r/8bdb2a56f46abfd301d6fffbf43448380c09a6f5.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The timerlat tracer aims to help the preemptive kernel developers to
found souces of wakeup latencies of real-time threads. Like cyclictest,
the tracer sets a periodic timer that wakes up a thread. The thread then
computes a *wakeup latency* value as the difference between the *current
time* and the *absolute time* that the timer was set to expire. The main
goal of timerlat is tracing in such a way to help kernel developers.
Usage
Write the ASCII text "timerlat" into the current_tracer file of the
tracing system (generally mounted at /sys/kernel/tracing).
For example:
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo timerlat > current_tracer
It is possible to follow the trace by reading the trace trace file:
[root@f32 tracing]# cat trace
# tracer: timerlat
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# || /
# |||| ACTIVATION
# TASK-PID CPU# |||| TIMESTAMP ID CONTEXT LATENCY
# | | | |||| | | | |
<idle>-0 [000] d.h1 54.029328: #1 context irq timer_latency 932 ns
<...>-867 [000] .... 54.029339: #1 context thread timer_latency 11700 ns
<idle>-0 [001] dNh1 54.029346: #1 context irq timer_latency 2833 ns
<...>-868 [001] .... 54.029353: #1 context thread timer_latency 9820 ns
<idle>-0 [000] d.h1 54.030328: #2 context irq timer_latency 769 ns
<...>-867 [000] .... 54.030330: #2 context thread timer_latency 3070 ns
<idle>-0 [001] d.h1 54.030344: #2 context irq timer_latency 935 ns
<...>-868 [001] .... 54.030347: #2 context thread timer_latency 4351 ns
The tracer creates a per-cpu kernel thread with real-time priority that
prints two lines at every activation. The first is the *timer latency*
observed at the *hardirq* context before the activation of the thread.
The second is the *timer latency* observed by the thread, which is the
same level that cyclictest reports. The ACTIVATION ID field
serves to relate the *irq* execution to its respective *thread* execution.
The irq/thread splitting is important to clarify at which context
the unexpected high value is coming from. The *irq* context can be
delayed by hardware related actions, such as SMIs, NMIs, IRQs
or by a thread masking interrupts. Once the timer happens, the delay
can also be influenced by blocking caused by threads. For example, by
postponing the scheduler execution via preempt_disable(), by the
scheduler execution, or by masking interrupts. Threads can
also be delayed by the interference from other threads and IRQs.
The timerlat can also take advantage of the osnoise: traceevents.
For example:
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo timerlat > current_tracer
[root@f32 tracing]# echo osnoise > set_event
[root@f32 tracing]# echo 25 > osnoise/stop_tracing_total_us
[root@f32 tracing]# tail -10 trace
cc1-87882 [005] d..h... 548.771078: #402268 context irq timer_latency 1585 ns
cc1-87882 [005] dNLh1.. 548.771082: irq_noise: local_timer:236 start 548.771077442 duration 4597 ns
cc1-87882 [005] dNLh2.. 548.771083: irq_noise: reschedule:253 start 548.771083017 duration 56 ns
cc1-87882 [005] dNLh2.. 548.771086: irq_noise: call_function_single:251 start 548.771083811 duration 2048 ns
cc1-87882 [005] dNLh2.. 548.771088: irq_noise: call_function_single:251 start 548.771086814 duration 1495 ns
cc1-87882 [005] dNLh2.. 548.771091: irq_noise: call_function_single:251 start 548.771089194 duration 1558 ns
cc1-87882 [005] dNLh2.. 548.771094: irq_noise: call_function_single:251 start 548.771091719 duration 1932 ns
cc1-87882 [005] dNLh2.. 548.771096: irq_noise: call_function_single:251 start 548.771094696 duration 1050 ns
cc1-87882 [005] d...3.. 548.771101: thread_noise: cc1:87882 start 548.771078243 duration 10909 ns
timerlat/5-1035 [005] ....... 548.771103: #402268 context thread timer_latency 25960 ns
For further information see: Documentation/trace/timerlat-tracer.rst
Link: https://lkml.kernel.org/r/71f18efc013e1194bcaea1e54db957de2b19ba62.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
In the context of high-performance computing (HPC), the Operating System
Noise (*osnoise*) refers to the interference experienced by an application
due to activities inside the operating system. In the context of Linux,
NMIs, IRQs, SoftIRQs, and any other system thread can cause noise to the
system. Moreover, hardware-related jobs can also cause noise, for example,
via SMIs.
The osnoise tracer leverages the hwlat_detector by running a similar
loop with preemption, SoftIRQs and IRQs enabled, thus allowing all
the sources of *osnoise* during its execution. Using the same approach
of hwlat, osnoise takes note of the entry and exit point of any
source of interferences, increasing a per-cpu interference counter. The
osnoise tracer also saves an interference counter for each source of
interference. The interference counter for NMI, IRQs, SoftIRQs, and
threads is increased anytime the tool observes these interferences' entry
events. When a noise happens without any interference from the operating
system level, the hardware noise counter increases, pointing to a
hardware-related noise. In this way, osnoise can account for any
source of interference. At the end of the period, the osnoise tracer
prints the sum of all noise, the max single noise, the percentage of CPU
available for the thread, and the counters for the noise sources.
Usage
Write the ASCII text "osnoise" into the current_tracer file of the
tracing system (generally mounted at /sys/kernel/tracing).
For example::
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo osnoise > current_tracer
It is possible to follow the trace by reading the trace trace file::
[root@f32 tracing]# cat trace
# tracer: osnoise
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth MAX
# || / SINGLE Interference counters:
# |||| RUNTIME NOISE % OF CPU NOISE +-----------------------------+
# TASK-PID CPU# |||| TIMESTAMP IN US IN US AVAILABLE IN US HW NMI IRQ SIRQ THREAD
# | | | |||| | | | | | | | | | |
<...>-859 [000] .... 81.637220: 1000000 190 99.98100 9 18 0 1007 18 1
<...>-860 [001] .... 81.638154: 1000000 656 99.93440 74 23 0 1006 16 3
<...>-861 [002] .... 81.638193: 1000000 5675 99.43250 202 6 0 1013 25 21
<...>-862 [003] .... 81.638242: 1000000 125 99.98750 45 1 0 1011 23 0
<...>-863 [004] .... 81.638260: 1000000 1721 99.82790 168 7 0 1002 49 41
<...>-864 [005] .... 81.638286: 1000000 263 99.97370 57 6 0 1006 26 2
<...>-865 [006] .... 81.638302: 1000000 109 99.98910 21 3 0 1006 18 1
<...>-866 [007] .... 81.638326: 1000000 7816 99.21840 107 8 0 1016 39 19
In addition to the regular trace fields (from TASK-PID to TIMESTAMP), the
tracer prints a message at the end of each period for each CPU that is
running an osnoise/CPU thread. The osnoise specific fields report:
- The RUNTIME IN USE reports the amount of time in microseconds that
the osnoise thread kept looping reading the time.
- The NOISE IN US reports the sum of noise in microseconds observed
by the osnoise tracer during the associated runtime.
- The % OF CPU AVAILABLE reports the percentage of CPU available for
the osnoise thread during the runtime window.
- The MAX SINGLE NOISE IN US reports the maximum single noise observed
during the runtime window.
- The Interference counters display how many each of the respective
interference happened during the runtime window.
Note that the example above shows a high number of HW noise samples.
The reason being is that this sample was taken on a virtual machine,
and the host interference is detected as a hardware interference.
Tracer options
The tracer has a set of options inside the osnoise directory, they are:
- osnoise/cpus: CPUs at which a osnoise thread will execute.
- osnoise/period_us: the period of the osnoise thread.
- osnoise/runtime_us: how long an osnoise thread will look for noise.
- osnoise/stop_tracing_us: stop the system tracing if a single noise
higher than the configured value happens. Writing 0 disables this
option.
- osnoise/stop_tracing_total_us: stop the system tracing if total noise
higher than the configured value happens. Writing 0 disables this
option.
- tracing_threshold: the minimum delta between two time() reads to be
considered as noise, in us. When set to 0, the default value will
be used, which is currently 5 us.
Additional Tracing
In addition to the tracer, a set of tracepoints were added to
facilitate the identification of the osnoise source.
- osnoise:sample_threshold: printed anytime a noise is higher than
the configurable tolerance_ns.
- osnoise:nmi_noise: noise from NMI, including the duration.
- osnoise:irq_noise: noise from an IRQ, including the duration.
- osnoise:softirq_noise: noise from a SoftIRQ, including the
duration.
- osnoise:thread_noise: noise from a thread, including the duration.
Note that all the values are *net values*. For example, if while osnoise
is running, another thread preempts the osnoise thread, it will start a
thread_noise duration at the start. Then, an IRQ takes place, preempting
the thread_noise, starting a irq_noise. When the IRQ ends its execution,
it will compute its duration, and this duration will be subtracted from
the thread_noise, in such a way as to avoid the double accounting of the
IRQ execution. This logic is valid for all sources of noise.
Here is one example of the usage of these tracepoints::
osnoise/8-961 [008] d.h. 5789.857532: irq_noise: local_timer:236 start 5789.857529929 duration 1845 ns
osnoise/8-961 [008] dNh. 5789.858408: irq_noise: local_timer:236 start 5789.858404871 duration 2848 ns
migration/8-54 [008] d... 5789.858413: thread_noise: migration/8:54 start 5789.858409300 duration 3068 ns
osnoise/8-961 [008] .... 5789.858413: sample_threshold: start 5789.858404555 duration 8723 ns interferences 2
In this example, a noise sample of 8 microseconds was reported in the last
line, pointing to two interferences. Looking backward in the trace, the
two previous entries were about the migration thread running after a
timer IRQ execution. The first event is not part of the noise because
it took place one millisecond before.
It is worth noticing that the sum of the duration reported in the
tracepoints is smaller than eight us reported in the sample_threshold.
The reason roots in the overhead of the entry and exit code that happens
before and after any interference execution. This justifies the dual
approach: measuring thread and tracing.
Link: https://lkml.kernel.org/r/e649467042d60e7b62714c9c6751a56299d15119.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
[
Made the following functions static:
trace_irqentry_callback()
trace_irqexit_callback()
trace_intel_irqentry_callback()
trace_intel_irqexit_callback()
Added to include/trace.h:
osnoise_arch_register()
osnoise_arch_unregister()
Fixed define logic for LATENCY_FS_NOTIFY
Reported-by: kernel test robot <lkp@intel.com>
]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Considering the following irq_domain_ops call chain:
- .alloc() is called when a clients calls platform_get_irq() or
gpiod_to_irq()
- .activate() is called next, when the clients calls
request_threaded_irq()
Check for the IRQ MUX conflict during the first stage (alloc instead of
activate). This avoids to provide the client with an IRQ that can't be
used.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20210617144602.2557619-1-fabien.dessenne@foss.st.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
With the coming addition of the osnoise tracer, the configs needed to
include the latency_fsnotify() has become more complex, and to keep the
declaration in the header file the same as in the C file, just have the
logic needed to define it in one place, and that defines LATENCY_FS_NOTIFY
which will be used in the C code.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Some minor code cleanups and updates which includes
- Mention module name under help in Kconfig.
- Remove extra lines and duplicate Pin range checks.
- Replace 'return ret' with 'return 0' in success path.
- Copyright year update.
- use devm_pinctrl_register() instead pinctrl_register() in probe.
Signed-off-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com>
Link: https://lore.kernel.org/r/1624273214-66849-1-git-send-email-lakshmi.sai.krishna.potthuri@xilinx.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The purpose of the device-managed functions is to bind the life-time of an
object to that of a parent device object.
This is not the case for the 'vdd-cpu' regulator in this driver. A
reference is obtained via devm_regulator_get() and immediately released
with devm_regulator_put().
In this case, the usage of devm_ functions is slightly excessive, as the
un-managed versions of these functions is a little cleaner (and slightly
more economical in terms of allocation).
This change converts the devm_regulator_{get,put}() to
regulator_{get,put}() in the get_alignment_from_regulator() function of
this driver.
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210624084737.42336-1-aardelean@deviqon.com
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
'clk_hw_set_rate_range()' does not return any error code and 'ret' is
known to be 0 at this point, so this message can never be displayed.
Remove it.
Fixes: 3fde0e16d0 ("drivers: clk: Add ZynqMP clock driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/71a9fed5f762a71248b8ac73c0a15af82f3ce1e2.1619867987.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When the firmware code is disabled, the incomplete error handling
in the clk driver causes compile-time warnings:
drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
drivers/clk/zynqmp/pll.c:147:29: error: 'fbdiv' is used uninitialized [-Werror=uninitialized]
147 | rate = parent_rate * fbdiv;
| ~~~~~~~~~~~~^~~~~~~
In function 'zynqmp_pll_get_mode',
inlined from 'zynqmp_pll_recalc_rate' at drivers/clk/zynqmp/pll.c:148:6:
drivers/clk/zynqmp/pll.c:61:27: error: 'ret_payload' is used uninitialized [-Werror=uninitialized]
61 | return ret_payload[1];
| ~~~~~~~~~~~^~~
drivers/clk/zynqmp/pll.c: In function 'zynqmp_pll_recalc_rate':
drivers/clk/zynqmp/pll.c:53:13: note: 'ret_payload' declared here
53 | u32 ret_payload[PAYLOAD_ARG_CNT];
| ^~~~~~~~~~~
drivers/clk/zynqmp/clk-mux-zynqmp.c: In function 'zynqmp_clk_mux_get_parent':
drivers/clk/zynqmp/clk-mux-zynqmp.c:57:16: error: 'val' is used uninitialized [-Werror=uninitialized]
57 | return val;
| ^~~
As it was apparently intentional to support this for compile testing
purposes, change the code to have just enough error handling for the
compiler to not notice the remaining bugs.
Fixes: 21f2375346 ("clk: zynqmp: Drop dependency on ARCH_ZYNQMP")
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/f1c4e8c903fe2d5df5413421920a56890a46387a.1624356908.git.michal.simek@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Two small fixes, both in upper layer drivers (scsi disk and cdrom).
The sd one is fixing a commit changing revalidation that came from the
block tree a while ago (5.10) and the sr one adds handling of a
condition we didn't previously handle for manually removed media.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYNZTQSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSp6AP9Q8jdJ
29ditYcnr23nsLgtzK0koo7ip3TM6WjEf3SSIAEA45wPiEdC8G35wfQFzefy3UfO
LGbq6eNGwPDakldysAs=
=NKGv
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, both in upper layer drivers (scsi disk and cdrom).
The sd one is fixing a commit changing revalidation that came from the
block tree a while ago (5.10) and the sr one adds handling of a
condition we didn't previously handle for manually removed media"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Call sd_revalidate_disk() for ioctl(BLKRRPART)
scsi: sr: Return appropriate error code when disk is ejected
The Qualcomm SC8180X has the typical ADSP, CDSP and MPSS remote
processors operated using the PAS interface, add support for these.
Attempts to configuring mss.lvl is failing, so a new adsp_data is
provided that skips this resource, for now.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210608174944.2045215-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add compatibles for the Audio DSP, Compute DSP and Modem subsystem found
in the Qualcomm SC8180x to the Peripheral Authentication Service
remoteproc binding.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210608174944.2045215-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
To have nanosecond output displayed in a more human readable format, its
nicer to convert it to a seconds format (XXX.YYYYYYYYY). The problem is that
to do so, the numbers must be divided by NSEC_PER_SEC, and moded too. But as
these numbers are 64 bit, this can not be done simply with '/' and '%'
operators, but must use do_div() instead.
Instead of performing the expensive do_div() in the hot path of the
tracepoint, it is more efficient to perform it during the output phase. But
passing in do_div() can confuse the parser, and do_div() doesn't work
exactly like a normal C function. It modifies the number in place, and we
don't want to modify the actual values in the ring buffer.
Two helper functions are now created:
__print_ns_to_secs() and __print_ns_without_secs()
They both take a value of nanoseconds, and the former will return that
number divided by NSEC_PER_SEC, and the latter will mod it with NSEC_PER_SEC
giving a way to print a nice human readable format:
__print_fmt("time=%llu.%09u",
__print_ns_to_secs(REC->nsec_val),
__print_ns_without_secs(REC->nsec_val))
Link: https://lkml.kernel.org/r/e503b903045496c4ccde52843e1e318b422f7a56.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
hwlat has some time operation checks on the sample loop, and it is
currently using pr_err (printk) to report them. The problem is that
this can lead the system to an unresponsible state due to an overflow of
printk messages. This problem can be mitigated by writing the error
message to the trace buffer.
Remove the printk messages from the sampling loop, switching the to
messages in the trace buffer.
No functional change.
Link: https://lkml.kernel.org/r/9d77c34869748aa105e965c769d24642914eea3a.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>