Enhance 'hyperv_features' selftest by adding a check that KVM
preserves values written to PV MSRs. Two MSRs are, however, 'special':
- HV_X64_MSR_EOI as it is a 'write-only' MSR,
- HV_X64_MSR_RESET as it always reads as '0'.
The later doesn't require any special handling right now because the
test never writes anything besides '0' to the MSR, leave a TODO node
about the fact.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hyperv_features test needs to set certain CPUID bits in Hyper-V feature
leaves but instead of open coding this, common KVM_X86_CPU_FEATURE()
infrastructure can be used.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-6-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It may not be clear what 'msr->available' means. The test actually
checks that accessing the particular MSR doesn't cause #GP, rename
the variable accordingly.
While on it, use 'true'/'false' instead of '1'/'0' for 'write'/
'fault_expected' as these are boolean.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Normally, genuine Hyper-V doesn't expose architectural invariant TSC
(CPUID.80000007H:EDX[8]) to its guests by default. A special PV MSR
(HV_X64_MSR_TSC_INVARIANT_CONTROL, 0x40000118) and corresponding CPUID
feature bit (CPUID.0x40000003.EAX[15]) were introduced. When bit 0 of the
PV MSR is set, invariant TSC bit starts to show up in CPUID. When the
feature is exposed to Hyper-V guests, reenlightenment becomes unneeded.
Add the feature to KVM. Keep CPUID output intact when the feature
wasn't exposed to L1 and implement the required logic for hiding
invariant TSC when the feature was exposed and invariant TSC control
MSR wasn't written to. Copy genuine Hyper-V behavior and forbid to
disable the feature once it was enabled.
For the reference, for linux guests, support for the feature was added
in commit dce7cd6275 ("x86/hyperv: Allow guests to enable InvariantTSC").
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID_8000_0007_EDX may come handy when X86_FEATURE_CONSTANT_TSC
needs to be checked.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid open coding BIT(0) of HV_X64_MSR_TSC_INVARIANT_CONTROL by adding
a dedicated define. While there's only one user at this moment, the
upcoming KVM implementation of Hyper-V Invariant TSC feature will need
to use it as well.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When handling direct page faults, pivot on the TDP MMU being globally
enabled instead of checking if the target MMU is a TDP MMU. Now that the
TDP MMU is all-or-nothing, if the TDP MMU is enabled, KVM will reach
direct_page_fault() if and only if the MMU is a TDP MMU. When TDP is
enabled (obviously required for the TDP MMU), only non-nested TDP page
faults reach direct_page_fault(), i.e. nonpaging MMUs are impossible, as
NPT requires paging to be enabled and EPT faults use ept_page_fault().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221012181702.3663607-8-seanjc@google.com>
[Use tdp_mmu_enabled variable. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify and optimize the logic for detecting if the current/active MMU
is a TDP MMU. If the TDP MMU is globally enabled, then the active MMU is
a TDP MMU if it is direct. When TDP is enabled, so called nonpaging MMUs
are never used as the only form of shadow paging KVM uses is for nested
TDP, and the active MMU can't be direct in that case.
Rename the helper and take the vCPU instead of an arbitrary MMU, as
nonpaging MMUs can show up in the walk_mmu if L1 is using nested TDP and
L2 has paging disabled. Taking the vCPU has the added bonus of cleaning
up the callers, all of which check the current MMU but wrap code that
consumes the vCPU.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221012181702.3663607-9-seanjc@google.com>
[Use tdp_mmu_enabled variable. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use is_tdp_mmu_page() instead of querying sp->tdp_mmu_page directly so
that all users benefit if KVM ever finds a way to optimize the logic.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221012181702.3663607-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename __direct_map() to direct_map() since the leading underscores are
unnecessary. This also makes the page fault handler names more
consistent: kvm_tdp_mmu_page_fault() calls kvm_tdp_mmu_map() and
direct_page_fault() calls direct_map().
Opportunistically make some trivial cleanups to comments that had to be
modified anyway since they mentioned __direct_map(). Specifically, use
"()" when referring to functions, and include kvm_tdp_mmu_map() among
the various callers of disallowed_hugepage_adjust().
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-11-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop calling make_mmu_pages_available() when handling TDP MMU faults.
The TDP MMU does not participate in the "available MMU pages" tracking
and limiting so calling this function is unnecessary work when handling
TDP MMU faults.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-10-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split out the page fault handling for the TDP MMU to a separate
function. This creates some duplicate code, but makes the TDP MMU fault
handler simpler to read by eliminating branches and will enable future
cleanups by allowing the TDP MMU and non-TDP MMU fault paths to diverge.
Only compile in the TDP MMU fault handler for 64-bit builds since
kvm_tdp_mmu_map() does not exist in 32-bit builds.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-9-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the initialization of fault.{gfn,slot} earlier in the page fault
handling code for fully direct MMUs. This will enable a future commit to
split out TDP MMU page fault handling without needing to duplicate the
initialization of these 2 fields.
Opportunistically take advantage of the fact that fault.gfn is
initialized in kvm_tdp_page_fault() rather than recomputing it from
fault->addr.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-8-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle faults on GFNs that do not have a backing memslot in
kvm_faultin_pfn() and drop handle_abnormal_pfn(). This eliminates
duplicate code in the various page fault handlers.
Opportunistically tweak the comment about handling gfn > host.MAXPHYADDR
to reflect that the effect of returning RET_PF_EMULATE at that point is
to avoid creating an MMIO SPTE for such GFNs.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-7-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pass the kvm_page_fault struct down to kvm_handle_error_pfn() to avoid a
memslot lookup when handling KVM_PFN_ERR_HWPOISON. Opportunistically
move the gfn_to_hva_memslot() call and @current down into
kvm_send_hwpoison_signal() to cut down on line lengths.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-6-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Handle error PFNs in kvm_faultin_pfn() rather than relying on the caller
to invoke handle_abnormal_pfn() after kvm_faultin_pfn().
Opportunistically rename kvm_handle_bad_page() to kvm_handle_error_pfn()
to make it more consistent with is_error_pfn().
This commit moves KVM closer to being able to drop
handle_abnormal_pfn(), which will reduce the amount of duplicate code in
the various page fault handlers.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-5-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Grab mmu_invalidate_seq in kvm_faultin_pfn() and stash it in struct
kvm_page_fault. The eliminates duplicate code and reduces the amount of
parameters needed for is_page_fault_stale().
Preemptively split out __kvm_faultin_pfn() to a separate function for
use in subsequent commits.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move kvm_mmu_{init,uninit}_tdp_mmu() behind tdp_mmu_enabled. This makes
these functions consistent with the rest of the calls into the TDP MMU
from mmu.c, and which is now possible since tdp_mmu_enabled is only
modified when the x86 vendor module is loaded. i.e. It will never change
during the lifetime of a VM.
This change also enabled removing the stub definitions for 32-bit KVM,
as the compiler will just optimize the calls out like it does for all
the other TDP MMU functions.
No functional change intended.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change tdp_mmu to a read-only parameter and drop the per-vm
tdp_mmu_enabled. For 32-bit KVM, make tdp_mmu_enabled a macro that is
always false so that the compiler can continue omitting cals to the TDP
MMU.
The TDP MMU was introduced in 5.10 and has been enabled by default since
5.15. At this point there are no known functionality gaps between the
TDP MMU and the shadow MMU, and the TDP MMU uses less memory and scales
better with the number of vCPUs. In other words, there is no good reason
to disable the TDP MMU on a live system.
Purposely do not drop tdp_mmu=N support (i.e. do not force 64-bit KVM to
always use the TDP MMU) since tdp_mmu=N is still used to get test
coverage of KVM's shadow MMU TDP support, which is used in 32-bit KVM.
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220921173546.2674386-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's add some output here so that the user has some feedback
about what is being run.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221004093131.40392-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kvm_binary_stats_test test currently does not have any output (unless
one of the TEST_ASSERT statement fails), so it's hard to say for a user
how far it did proceed already. Thus let's make this a little bit more
user-friendly and include some TAP output via the kselftest.h interface.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20221004093131.40392-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since the commit 65855ed8b0 ("KVM: X86: Synchronize the shadow
pagetable before link it"), no sp would be linked with
sp->unsync_children = 1.
So make it WARN if it is the case.
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Message-Id: <20221212090106.378206-1-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 9bcb90650e ("KVM: VMX: Get rid of eVMCS specific VMX controls
sanitization") dropped 'vmcs_conf' sanitization for KVM-on-Hyper-V because
there's no known Hyper-V version which would expose a feature
unsupported in eVMCS in VMX feature MSRs. This works well for all
currently existing Hyper-V version, however, future Hyper-V versions
may add features which are supported by KVM and are currently missing
in eVMCSv1 definition (e.g. APIC virtualization, PML,...). When this
happens, existing KVMs will get broken. With the inverted 'unsupported
by eVMCSv1' checks, we can resurrect vmcs_conf sanitization and make
KVM future proof.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20221104144708.435865-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation to restoring vmcs_conf sanitization for KVM-on-Hyper-V,
(and for completeness) add tertiary VM-execution controls to
'evmcs_supported_ctrls'.
No functional change intended as KVM doesn't yet expose
MSR_IA32_VMX_PROCBASED_CTLS3 to its guests.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20221104144708.435865-4-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a new feature gets implemented in KVM, EVMCS1_UNSUPPORTED_* defines
need to be adjusted to avoid the situation when the feature is exposed
to the guest but there's no corresponding eVMCS field[s] for it. This
is not obvious and fragile. Invert 'unsupported by eVMCSv1' check and
make it 'supported by eVMCSv1' instead, this way it's much harder to
make a mistake. New features will get added to EVMCS1_SUPPORTED_*
defines when the corresponding fields are added to eVMCS definition.
No functional change intended. EVMCS1_SUPPORTED_* defines are composed
by taking KVM_{REQUIRED,OPTIONAL}_VMX_ defines and filtering out what
was previously known as EVMCS1_UNSUPPORTED_*.
From all the controls, SECONDARY_EXEC_TSC_SCALING requires special
handling as it's actually present in eVMCSv1 definition but is not
currently supported for Hyper-V-on-KVM, just for KVM-on-Hyper-V. As
evmcs_supported_ctrls will be used for both scenarios, just add it
there instead of EVMCS1_SUPPORTED_2NDEXEC.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20221104144708.435865-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only unsupported primary processor-based VM-execution control at the
moment is CPU_BASED_ACTIVATE_TERTIARY_CONTROLS and KVM doesn't expose it
in nested VMX feature MSRs anyway (see nested_vmx_setup_ctls_msrs())
but in preparation to inverting "unsupported with eVMCS" checks (and
for completeness) it's better to sanitize MSR_IA32_VMX_PROCBASED_CTLS/
MSR_IA32_VMX_TRUE_PROCBASED_CTLS too.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20221104144708.435865-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restore volume after charge pump and PGA activation to ensure
that volume settings are correctly applied when re-enabling codec
from SND_SOC_BIAS_OFF state.
CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration
affect how the volume register are applied and must be configured first.
Fixes: a91eb199e4 ("ASoC: Initial WM8904 CODEC driver")
Link: https://lore.kernel.org/all/c7864c35-738c-a867-a6a6-ddf9f98df7e7@gmail.com/
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221223080247.7258-1-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
usb-vbus-regulator is a better generic node name than dcdc to change the
example to match.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20221229191542.123367-1-luca@z3ntu.xyz
Signed-off-by: Mark Brown <broonie@kernel.org>
x86:
* several fixes to nested VMX execution controls
* fixes and clarification to the documentation for Xen emulation
* do not unnecessarily release a pmu event with zero period
* MMU fixes
* fix Coverity warning in kvm_hv_flush_tlb()
selftests:
* fixes for the ucall mechanism in selftests
* other fixes mostly related to compilation with clang
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmOsNPcUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqWQf/dpeSMJtxAL74mvHBMNq4z/KGF9+P
OBVetFCfgieMyjPc956k8ZxPcczd6sInKPboWRXjd/FtdTB++LTP+kAJ6TH6q1RK
IaWWMQ06oF3KFVrufzduK9YvuIcdJfGBOWrrEOLm+TkmrPtcEhj+UOma3sjgLECs
gXRHC3/ETYZqugB1XS1HGSj7+dtx0aKMvVwPQCl+/MGgTAfvOtRPIxRdE5CzRNL9
ZFW1aOW3d8XKTLrww8ZJlQg3fHrsOTv6ZsNolR/sOdHOB4oRMEvroy2IkOXqnnK9
zjjSKI1S60FSZtPwgsBdgNt+AJZAOfOrfIY7u1fHYAZUInBVD/H7NC8DRQ==
=ivgk
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Changes that were posted too late for 6.1, or after the release.
x86:
- several fixes to nested VMX execution controls
- fixes and clarification to the documentation for Xen emulation
- do not unnecessarily release a pmu event with zero period
- MMU fixes
- fix Coverity warning in kvm_hv_flush_tlb()
selftests:
- fixes for the ucall mechanism in selftests
- other fixes mostly related to compilation with clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (41 commits)
KVM: selftests: restore special vmmcall code layout needed by the harness
Documentation: kvm: clarify SRCU locking order
KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET
KVM: x86/xen: Documentation updates and clarifications
KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi
KVM: x86/xen: Simplify eventfd IOCTLs
KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_ports
KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly
KVM: x86/xen: Fix memory leak in kvm_xen_write_hypercall_page()
KVM: Delete extra block of "};" in the KVM API documentation
kvm: x86/mmu: Remove duplicated "be split" in spte.h
kvm: Remove the unused macro KVM_MMU_READ_{,UN}LOCK()
MAINTAINERS: adjust entry after renaming the vmx hyperv files
KVM: selftests: Mark correct page as mapped in virt_map()
KVM: arm64: selftests: Don't identity map the ucall MMIO hole
KVM: selftests: document the default implementation of vm_vaddr_populate_bitmap
KVM: selftests: Use magic value to signal ucall_alloc() failure
KVM: selftests: Disable "gnu-variable-sized-type-not-at-end" warning
KVM: selftests: Include lib.mk before consuming $(CC)
KVM: selftests: Explicitly disable builtins for mem*() overrides
...
- fix various problems in handling the Command Supported and Effects log
(Christoph Hellwig)
- don't allow unprivileged passthrough of commands that don't transfer
data but modify logical block content (Christoph Hellwig)
- add a features and quirks policy document (Christoph Hellwig)
- fix some really nasty code that was correct but made smatch complain
(Sagi Grimberg)
-----BEGIN PGP SIGNATURE-----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=RX6Q
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme into block-6.2
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix various problems in handling the Command Supported and Effects log
(Christoph Hellwig)
- don't allow unprivileged passthrough of commands that don't transfer
data but modify logical block content (Christoph Hellwig)
- add a features and quirks policy document (Christoph Hellwig)
- fix some really nasty code that was correct but made smatch complain
(Sagi Grimberg)"
* tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
Add support for new fields coming with socinfo structure under v16 to get
SKU information, product code and name and type of different parts present
in the SoC. Also, add debugfs nodes to read feature and product codes to
allow user to get SKU and other SoC details. Support for SoC parts name
and type parsing will be added separately. Details of fields added:
* feature_code: mapped to qcom internal and external SKU IDs
* pcode: product code
* npartnamemap_offset: parts name map array offset from socinfo base ptr
* nnum_partname_mapping: number of part mappings
Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221125103533.2960-1-quic_namajain@quicinc.com
Node names should be generic so use consistently speaker-amp for CS35L41
speaker amplifier.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221224154255.43499-5-krzysztof.kozlowski@linaro.org
Neither qcom,sm8250-lpass-va-macro bindings nor the driver use
"clock-frequency" property.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221224154255.43499-3-krzysztof.kozlowski@linaro.org
The node names should be generic and the bindings expect "bus" for
simple-bus nodes:
msm8996-mtp.dtb: agnoc@0: $nodename:0: 'agnoc@0' does not match '^bus(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221224154255.43499-1-krzysztof.kozlowski@linaro.org
Enable I2C Serial Engines 1, 2 and 3 which are known to have hardware
connected to them, leaving the rest disabled to save on power. For
this, only GPI DMA 0 and QUP 0 need to be enabled, as nothing seems to
be connected to Serial Engines on GPU DMA 1 / QUP 1. Beyond this
downstream only defines a UART console available on Serial Engine 4
which also resides on QUP 0.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216233408.1283581-4-marijn.suijten@somainline.org
Add Qualcomm Universal Peripheral nodes with SPI and I2C Serial Engines.
QUP 0 only has two SPIs at index 0 and 2, QUP 1 has four SPIs with a gap
in the middle (ranging from 5-9 with SPI 7 missing). Both QUPs have 5
I2C Serial Engines.
[Marijn: Add iommus, reword patch description, reorder all properties,
sort based on address, use QCOM_GPI_ constants, drop dma cells from 5
to 3]
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216233408.1283581-3-marijn.suijten@somainline.org
Add pin setup for SPI/I2C Serial Engines that are supported under the
Qualcomm Universal Peripheral found on SM6125.
[Un-nest pins, remove duplicate pins= properties, follow new node naming
conventions, fix qup_14 -> qup14 function typo]
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216233408.1283581-2-marijn.suijten@somainline.org
- Remove autorepeat (leave key repetition to userspace);
- Remove unneeded status = "okay" (this is the default);
- Remove unneeded linux,input-type <EV_KEY> (this is the default for
gpio-keys);
- Allow the interrupt line for this button to be disabled;
- Use a full, descriptive node name;
- Set proper bias on the GPIO via pinctrl;
- Sort properties;
- Replace deprecated gpio-key,wakeup property with wakeup-source.
Fixes: 82e1783890 ("arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222192443.119103-1-marijn.suijten@somainline.org
Add an IOMMU context to the USB DWC3 controller, required to get USB
functionality upon enablement of apps_smmu.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222193254.126925-5-marijn.suijten@somainline.org
When enabling the APPS SMMU the mainline driver reconfigures the SMMU
from its bootloader configuration, losing the stream mapping for (among
which) the SDHCI hardware and breaking its ADMA feature. This feature
can be disabled with:
sdhci.debug_quirks=0x40
But it is of course desired to have this feature enabled and working
through the SMMU.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222193254.126925-4-marijn.suijten@somainline.org
Add a node for the APPS SMMU, to which various devices such as USB and
storage nodes are connected.
[Marijn: add the new, generic, "qcom,smmu-500" compatible, add patch
description, reorder # properties]
Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222193254.126925-3-marijn.suijten@somainline.org
Reorder the clocks and corresponding names to match the QUSB2 phy
schema, fixing the following CHECK_DTBS errors:
arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dtb: phy@1613000: clock-names:0: 'cfg_ahb' was expected
From schema: /newdata/aosp-r/kernel/mainline/kernel/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dtb: phy@1613000: clock-names:1: 'ref' was expected
From schema: /newdata/aosp-r/kernel/mainline/kernel/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
Fixes: cff4bbaf2a ("arm64: dts: qcom: Add support for SM6125")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221216213343.1140143-1-marijn.suijten@somainline.org
Sony's seine board features an SD Card slot on SDHCI 2, that is to be
powered by l5 and l22. The card detect pin is already biased via
updates on the generic sdc2_*_state pinctrl nodes.
As usual regulator voltages are decreased to the maximum voted by the
downstream driver for safety. SDHCI 2 is the only hardware block
feeding off of these.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222203636.250190-5-marijn.suijten@somainline.org
While SDHCI 1 appears to work out of the box, we cannot rely on the
bootloader-enabled regulators nor expect them to remain enabled (e.g.
when finally dropping pd_ignore_unused). Provide it the necessary l24
and l11 regulators now that PM6125 regulators have been made available
on this board.
As usual regulator voltages are decreased to the maximum voted by the
downstream driver for safety. No other hardware feeds off of these
regulators anyway (except UFS, which isn't used on the seine board in
favour of a DV6DMB eMMC card connected to SDHCI 1).
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222203636.250190-4-marijn.suijten@somainline.org
Document the use of l7, l10 and l15 in the High Speed Qualcomm USB2 PHY,
in order to keep the regulators voted on when USB is active.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222203636.250190-3-marijn.suijten@somainline.org
Configure PM6125 regulators based on availability and voltages defined
downstream, to allow powering up (and/or keeping powered) other hardware
blocks going forward.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222203636.250190-2-marijn.suijten@somainline.org
According to generic rules the SoC name should be first:
arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dtb: clock-controller@5f00000: compatible: 'oneOf' conditional failed, one must be fixed:
'qcom,dispcc-sm6125' does not match '^qcom,(apq|ipq|mdm|msm|qcm|qcs|sa|sc|sdm|sdx|sm)[0-9]+-.*$'
And this is already reflected by the bindings submitted prior to the
addition of this driver. Any DTS following these rules will end up with
a non-probing driver because of this mismatch.
Fixes: 6e87c8f074 ("clk: qcom: Add display clock controller driver for SM6125")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221222210140.278077-1-marijn.suijten@somainline.org
