Commit graph

1,169,205 commits

Author SHA1 Message Date
Peng Li
93f764371c net: pc300too: remove redundant blank lines
This patch removes some redundant blank lines.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:58:11 -07:00
gushengxian
51a1ebc35b net: devres: Correct a grammatical error
Correct a grammatical error.

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:55:28 -07:00
Heiner Kallweit
1ee8856de8 r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM
It has been reported that on RTL8106e the link-up interrupt may be
significantly delayed if the user enables ASPM L1. Per default ASPM
is disabled. The change leaves L1 enabled on the PCIe link (thus still
allowing to reach higher package power saving states), but the
NIC won't actively trigger it.

Reported-by: Koba Ko <koba.ko@canonical.com>
Tested-by: Koba Ko <koba.ko@canonical.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:54:25 -07:00
wengjianfeng
43fa32d1cc nfc: fdp: remove unnecessary labels
Some labels are meaningless, so we delete them and use the
return statement instead of the goto statement.

Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:50:32 -07:00
David S. Miller
62d3f4af33 Merge branch 's390-qeyj-next'
Julian Wiedmann says:

====================
s390/qeth: updates 2021-06-11

please apply the following patch series for qeth to netdev's net-next tree.

This enables TX NAPI for those devices that didn't use it previously, so
that we can eventually rip out the qdio layer's internal interrupt
machinery.

Other than that it's just the normal mix of minor improvements and
cleanups.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:49:15 -07:00
Alexandra Winter
953fb4dc4f s390/qeth: Consider dependency on SWITCHDEV module
Without the SWITCHDEV module, the bridgeport attribute LEARNING_SYNC
of the physical device (self) does not provide any functionality.
Instead of calling the no-op stub version of the switchdev functions,
fail the setting of the attribute with an appropriate message.

While at it, also add an error message for the 'not supported by HW'
case.

Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:49:15 -07:00
Julian Wiedmann
bb7032ddc9 s390/qeth: shrink TX buffer struct
Convert the large boolean array into a bitmap, this substantially
reduces the struct's size. While at it also clarify the naming.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:49:15 -07:00
Julian Wiedmann
6b7ec41e57 s390/qeth: remove TX buffer's pointer to its queue
qeth_tx_complete_buf() is the only remaining user of buf->q, and the
callers can easily provide this as a parameter instead.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:49:15 -07:00
Julian Wiedmann
838e4cc808 s390/qeth: remove QAOB's pointer to its TX buffer
Maintaining a pointer inside the aob's user-definable area is fragile
and unnecessary. At this stage we only need it to overload the buffer's
state field, and to access the buffer's TX queue.

The first part is easily solved by tracking the aob's state within the
aob itself. This also feels much cleaner and self-contained.
For enabling the access to the associated TX queue, we can store the
queue's index in the aob.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:49:15 -07:00
Julian Wiedmann
f875d880f0 s390/qeth: consolidate completion of pending TX buffers
With commit 396c100472 ("s390/qdio: let driver manage the QAOB")
a pending TX buffer now has access to its associated QAOB during
TX completion processing. We can thus reduce the amount of work & state
propagation that needs to be done by qeth_qdio_handle_aob().

Move all this logic into the respective TX completion paths. Doing so
even allows us to determine more precise TX_NOTIFY_* values via
qeth_compute_cq_notification(aob->aorc, ...).

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:49:15 -07:00
Julian Wiedmann
c0a0186630 s390/qeth: use ethtool_sprintf()
Use a recently introduced helper to fill our ethtool stats strings.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:49:15 -07:00
Julian Wiedmann
3518ae76f2 s390/qeth: unify the tracking of active cmds on ccw device
We have one field to track _whether_ a cmd is active on a ccw device
('irq_pending'), and one to track _which_ cmd it is ('active_cmd').

Get rid of the irq_pending field, by testing active_cmd for NULL.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:49:15 -07:00
Julian Wiedmann
7a4b92e8e0 s390/qeth: also use TX NAPI for non-IQD devices
Set scan_threshold = 0 to opt out from the qdio layer's internal tasklet
& timer mechanism for TX completions, and replace it with the TX NAPI
infrastructure that qeth already uses for IQD devices. This avoids the
fragile logic in qdio_check_output_queue(), enables tighter integration
and gives us more tuning options via ethtool in the future.

For now we continue to apply the same policy as the qdio layer:
scan for completions if 32 TX buffers are in use, or after 1 sec.
A re-scan is done after 10 sec, but only if no TX interrupt is pending.

With scan_threshold = 0 we no longer get TX completion scans from
within qdio_get_next_buffers(). So trigger these manually in qeth_poll()
and in the RX path switch to the equivalent qdio_inspect_queue().

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:49:15 -07:00
Julian Wiedmann
e872d0c124 s390/qeth: count TX completion interrupts
While the qdio layer already tracks the number of HW interrupts for a
device, there's value in understanding how many of them have been
raised due to our TX completion logic.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:49:15 -07:00
David S. Miller
e5b0a1b7b7 Merge branch 'sja1110-dsa-tagging'
Vladimir Oltean says:

====================
DSA tagging driver for NXP SJA1110

This series adds support for tagging data and control packets on the new
NXP SJA1110 switch (supported by the sja1105 driver). Up to this point
it used the sja1105 driver, which allowed it to send data packets, but
not PDUs as those required by STP and PTP.

To accommodate this new tagger which has both a header and a trailer, we
need to refactor the entire DSA tagging scheme, to replace the "overhead"
concept with separate "needed_headroom" and "needed_tailroom" concepts,
so that SJA1110 can declare its need for both.

There is also some consolidation work for the receive path of tag_8021q
and its callers (sja1105 and ocelot-8021q).

Changes in v3:
Rebase in front of the "Port the SJA1105 DSA driver to XPCS" series
which seems to have stalled for now.

Changes in v2:
Export the dsa_8021q_rcv and sja1110_process_meta_tstamp symbols to
avoid build errors as modules.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:45:38 -07:00
Vladimir Oltean
566b18c8b7 net: dsa: sja1105: implement TX timestamping for SJA1110
The TX timestamping procedure for SJA1105 is a bit unconventional
because the transmit procedure itself is unconventional.

Control packets (and therefore PTP as well) are transmitted to a
specific port in SJA1105 using "management routes" which must be written
over SPI to the switch. These are one-shot rules that match by
destination MAC address on traffic coming from the CPU port, and select
the precise destination port for that packet. So to transmit a packet
from NET_TX softirq context, we actually need to defer to a process
context so that we can perform that SPI write before we send the packet.
The DSA master dev_queue_xmit() runs in process context, and we poll
until the switch confirms it took the TX timestamp, then we annotate the
skb clone with that TX timestamp. This is why the sja1105 driver does
not need an skb queue for TX timestamping.

But the SJA1110 is a bit (not much!) more conventional, and you can
request 2-step TX timestamping through the DSA header, as well as give
the switch a cookie (timestamp ID) which it will give back to you when
it has the timestamp. So now we do need a queue for keeping the skb
clones until their TX timestamps become available.

The interesting part is that the metadata frames from SJA1105 haven't
disappeared completely. On SJA1105 they were used as follow-ups which
contained RX timestamps, but on SJA1110 they are actually TX completion
packets, which contain a variable (up to 32) array of timestamps.
Why an array? Because:
- not only is the TX timestamp on the egress port being communicated,
  but also the RX timestamp on the CPU port. Nice, but we don't care
  about that, so we ignore it.
- because a packet could be multicast to multiple egress ports, each
  port takes its own timestamp, and the TX completion packet contains
  the individual timestamps on each port.

This is unconventional because switches typically have a timestamping
FIFO and raise an interrupt, but this one doesn't. So the tagger needs
to detect and parse meta frames, and call into the main switch driver,
which pairs the timestamps with the skbs in the TX timestamping queue
which are waiting for one.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:45:38 -07:00
Vladimir Oltean
30b73242e6 net: dsa: sja1105: add the RX timestamping procedure for SJA1110
This is really easy, since the full RX timestamp is in the DSA trailer
and the tagger code transfers it to SJA1105_SKB_CB(skb)->tstamp, we just
need to move it to the skb shared info region. This is as opposed to
SJA1105, where the RX timestamp was received in a meta frame (so there
needed to be a state machine to pair the 2 packets) and the timestamp
was partial (so the packet, once matched with its timestamp, needed to
be added to an RX timestamping queue where the PTP aux worker would
reconstruct that timestamp).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:45:38 -07:00
Vladimir Oltean
4913b8ebf8 net: dsa: add support for the SJA1110 native tagging protocol
The SJA1110 has improved a few things compared to SJA1105:

- To send a control packet from the host port with SJA1105, one needed
  to program a one-shot "management route" over SPI. This is no longer
  true with SJA1110, you can actually send "in-band control extensions"
  in the packets sent by DSA, these are in fact DSA tags which contain
  the destination port and switch ID.

- When receiving a control packet from the switch with SJA1105, the
  source port and switch ID were written in bytes 3 and 4 of the
  destination MAC address of the frame (which was a very poor shot at a
  DSA header). If the control packet also had an RX timestamp, that
  timestamp was sent in an actual follow-up packet, so there were
  reordering concerns on multi-core/multi-queue DSA masters, where the
  metadata frame with the RX timestamp might get processed before the
  actual packet to which that timestamp belonged (there is no way to
  pair a packet to its timestamp other than the order in which they were
  received). On SJA1110, this is no longer true, control packets have
  the source port, switch ID and timestamp all in the DSA tags.

- Timestamps from the switch were partial: to get a 64-bit timestamp as
  required by PTP stacks, one would need to take the partial 24-bit or
  32-bit timestamp from the packet, then read the current PTP time very
  quickly, and then patch in the high bits of the current PTP time into
  the captured partial timestamp, to reconstruct what the full 64-bit
  timestamp must have been. That is awful because packet processing is
  done in NAPI context, but reading the current PTP time is done over
  SPI and therefore needs sleepable context.

But it also aggravated a few things:

- Not only is there a DSA header in SJA1110, but there is a DSA trailer
  in fact, too. So DSA needs to be extended to support taggers which
  have both a header and a trailer. Very unconventional - my understanding
  is that the trailer exists because the timestamps couldn't be prepared
  in time for putting them in the header area.

- Like SJA1105, not all packets sent to the CPU have the DSA tag added
  to them, only control packets do:

  * the ones which match the destination MAC filters/traps in
    MAC_FLTRES1 and MAC_FLTRES0
  * the ones which match FDB entries which have TRAP or TAKETS bits set

  So we could in theory hack something up to request the switch to take
  timestamps for all packets that reach the CPU, and those would be
  DSA-tagged and contain the source port / switch ID by virtue of the
  fact that there needs to be a timestamp trailer provided. BUT:

- The SJA1110 does not parse its own DSA tags in a way that is useful
  for routing in cross-chip topologies, a la Marvell. And the sja1105
  driver already supports cross-chip bridging from the SJA1105 days.
  It does that by automatically setting up the DSA links as VLAN trunks
  which contain all the necessary tag_8021q RX VLANs that must be
  communicated between the switches that span the same bridge. So when
  using tag_8021q on sja1105, it is possible to have 2 switches with
  ports sw0p0, sw0p1, sw1p0, sw1p1, and 2 VLAN-unaware bridges br0 and
  br1, and br0 can take sw0p0 and sw1p0, and br1 can take sw0p1 and
  sw1p1, and forwarding will happen according to the expected rules of
  the Linux bridge.
  We like that, and we don't want that to go away, so as a matter of
  fact, the SJA1110 tagger still needs to support tag_8021q.

So the sja1110 tagger is a hybrid between tag_8021q for data packets,
and the native hardware support for control packets.

On RX, packets have a 13-byte trailer if they contain an RX timestamp.
That trailer is padded in such a way that its byte 8 (the start of the
"residence time" field - not parsed by Linux because we don't care) is
aligned on a 16 byte boundary. So the padding has a variable length
between 0 and 15 bytes. The DSA header contains the offset of the
beginning of the padding relative to the beginning of the frame (and the
end of the padding is obviously the end of the packet minus 13 bytes,
the length of the trailer). So we discard it.

Packets which don't have a trailer contain the source port and switch ID
information in the header (they are "trap-to-host" packets). Packets
which have a trailer contain the source port and switch ID in the trailer.

On TX, the destination port mask and switch ID is always in the trailer,
so we always need to say in the header that a trailer is present.

The header needs a custom EtherType and this was chosen as 0xdadc, after
0xdada which is for Marvell and 0xdadb which is for VLANs in
VLAN-unaware mode on SJA1105 (and SJA1110 in fact too).

Because we use tag_8021q in concert with the native tagging protocol,
control packets will have 2 DSA tags.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:45:38 -07:00
Vladimir Oltean
617ef8d937 net: dsa: sja1105: make SJA1105_SKB_CB fit a full timestamp
In SJA1105, RX timestamps for packets sent to the CPU are transmitted in
separate follow-up packets (metadata frames). These contain partial
timestamps (24 or 32 bits) which are kept in SJA1105_SKB_CB(skb)->meta_tstamp.

Thankfully, SJA1110 improved that, and the RX timestamps are now
transmitted in-band with the actual packet, in the timestamp trailer.
The RX timestamps are now full-width 64 bits.

Because we process the RX DSA tags in the rcv() method in the tagger,
but we would like to preserve the DSA code structure in that we populate
the skb timestamp in the port_rxtstamp() call which only happens later,
the implication is that we must somehow pass the 64-bit timestamp from
the rcv() method all the way to port_rxtstamp(). We can use the skb->cb
for that.

Rename the meta_tstamp from struct sja1105_skb_cb from "meta_tstamp" to
"tstamp", and increase its size to 64 bits.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:45:38 -07:00
Vladimir Oltean
233697b3b3 net: dsa: tag_8021q: refactor RX VLAN parsing into a dedicated function
The added value of this function is that it can deal with both the case
where the VLAN header is in the skb head, as well as in the offload field.
This is something I was not able to do using other functions in the
network stack.

Since both ocelot-8021q and sja1105 need to do the same stuff, let's
make it a common service provided by tag_8021q.

This is done as refactoring for the new SJA1110 tagger, which partly
uses tag_8021q as well (just like SJA1105), and will be the third caller.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:45:38 -07:00
Vladimir Oltean
ab6a303c54 net: dsa: tag_8021q: remove shim declarations
All users of tag_8021q select it in Kconfig, so shim functions are not
needed because it is not possible for it to be disabled and its callers
enabled.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:45:38 -07:00
Vladimir Oltean
baa3ad08de net: dsa: tag_sja1105: stop resetting network and transport headers
This makes no sense and is not needed, it is probably a debugging
leftover.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:45:38 -07:00
Vladimir Oltean
4e50025129 net: dsa: generalize overhead for taggers that use both headers and trailers
Some really really weird switches just couldn't decide whether to use a
normal or a tail tagger, so they just did both.

This creates problems for DSA, because we only have the concept of an
'overhead' which can be applied to the headroom or to the tailroom of
the skb (like for example during the central TX reallocation procedure),
depending on the value of bool tail_tag, but not to both.

We need to generalize DSA to cater for these odd switches by
transforming the 'overhead / tail_tag' pair into 'needed_headroom /
needed_tailroom'.

The DSA master's MTU is increased to account for both.

The flow dissector code is modified such that it only calls the DSA
adjustment callback if the tagger has a non-zero header length.

Taggers are trivially modified to declare either needed_headroom or
needed_tailroom, based on the tail_tag value that they currently
declare.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:45:38 -07:00
Vladimir Oltean
6c0de59b3d net: dsa: sja1105: allow RX timestamps to be taken on all ports for SJA1110
On SJA1105, there is support for a cascade port which is presumably
connected to a downstream SJA1105 switch. The upstream one does not take
PTP timestamps for packets received on this port, presumably because the
downstream switch already did (and for PTP, it only makes sense for the
leaf nodes in a DSA switch tree to do that).

I haven't been able to validate that feature in a fully assembled setup,
so I am disabling the feature by setting the cascade port to an unused
port value (ds->num_ports).

In SJA1110, multiple cascade ports are supported, and CASC_PORT became
a bit mask from a port number. So when CASC_PORT is set to ds->num_ports
(which is 11 on SJA1110), it is actually set to 0b1011, so ports 3, 1
and 0 are configured as cascade ports and we cannot take RX timestamps
on them.

So we need to introduce a check for SJA1110 and set things differently
(to zero there), so that the cascading feature is properly disabled and
RX timestamps can be taken on all ports.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:45:38 -07:00
Vladimir Oltean
29305260d2 net: dsa: sja1105: enable the TTEthernet engine on SJA1110
As opposed to SJA1105 where there are parts with TTEthernet and parts
without, in SJA1110 all parts support it, but it must be enabled in the
static config. So enable it unconditionally. We use it for the tc-taprio
and tc-gate offload.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:45:38 -07:00
David S. Miller
f244e256e1 Merge branch 'hns3-ptp'
Guangbin Huang says:

====================
net: hns3: add support for PTP

This series adds PTP support for the HNS3 ethernet driver.

change log:
V1 -> V2:
1. use spinlock to prevent concurrency
2. add the handling when ptp_clock_register() returns NULL
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:43:16 -07:00
Huazhong Tan
b34c157f0c net: hns3: add debugfs support for ptp info
Add a debugfs interface for dumping ptp information, which
is helpful for debugging.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:43:16 -07:00
Huazhong Tan
0bf5eb7885 net: hns3: add support for PTP
Adds PTP support for HNS3 ethernet driver.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11 12:43:16 -07:00
Linus Torvalds
f21b807c3c drm fixes for 5.13-rc6
drm:
 - auth locking fix
 
 ttm:
 - locking fix
 
 amdgpu:
 - Use kvzmalloc in amdgu_bo_create
 - Use drm_dbg_kms for reporting failure to get a GEM FB
 - Fix some register offsets for Sienna Cichlid
 - Fix fall-through warning
 
 radeon:
 - memcpy_to/from_io fixes
 
 msm:
 - NULL ptr deref fix
 - CP_PROTECT reg programming fix
 - incorrect register shift fix
 - DSI blank screen fix
 
 sun4i:
 - hdmi output probing fix
 
 mcde:
 - DSI pipeline calc fix
 
 vc4:
 - out of bounds fix
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmDC2ZcACgkQDHTzWXnE
 hr4Quw/+JjLIJAIgOCmwP1KoJawDkhBkyV8nyKWmHjoL6QAGJBomaeTV/3pNE++s
 Ia2LruGYf8cjenNuIW80vsp2BV906SOjzpwNq2mp/X5oBLeX+1RbgPrzSP91timU
 jVV+6C4kUurbhJs8xC/GM4/skanq7MIJuBQQz+dlZzRe6/aeUTpOAVaoBoUwQnU6
 NTCWmqaWSxvuL5dzhsrgOubciiv/UmgjltHPThjAtxM76K0gBnmUiw77rgoT8LCe
 l7yulaSb6O+ayLtZ5plYunaTB9KQQQZG0OLyXq0bpQpp3jWL7NHoXk0bygI+2y3A
 76tvLUk2/e2FrTRRGrFk/nzn8DvdG4P6YrzGLu9Cww8IrU2bYI0mdedd7V7kx/Ri
 Buucb7HXovlbfCNKz0i0BOvYTdaJ6z2+Ljb0Kbxv/DsiD/ZbjmJG6ZitgqbVaI9U
 1XtjMEZmTZL5osvquJ4oPeOYnA3K++bjO3+1NYFOzWPZt3/LPZ08BGWrX5W57UrB
 8JcJ+t2v2JHfmkNaTBrD7HQAG9OMHzbEaCgVRmSxPNwVmgpTOlQMDjS/8I6o1axV
 D0Fo93AtJXwQ5tsjqrdUXZcBWFCBGZQIFtmcYEfosRzrM7/G4SC3kxoZ96YG7e1t
 3oXQdTP6M6rPSLTe7/jCUxMEV8oT18L+UIPFHvq7Rq2PDr1vEus=
 =cy9b
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2021-06-11' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Another week of fixes, nothing too crazy, but a few all over the
  place.

  Two locking fixes in the core/ttm area, a couple of small driver fixes
  (radeon, sun4i, mcde, vc4). Then msm and amdgpu have a set of fixes
  each, mostly for smaller things, though the msm has a DSI fix for a
  black screen.

  I haven't seen any intel fixes this week so they may have a few that
  may or may not wait for next week.

  drm:
   - auth locking fix

  ttm:
   - locking fix

  amdgpu:
   - Use kvzmalloc in amdgu_bo_create
   - Use drm_dbg_kms for reporting failure to get a GEM FB
   - Fix some register offsets for Sienna Cichlid
   - Fix fall-through warning

  radeon:
   - memcpy_to/from_io fixes

  msm:
   - NULL ptr deref fix
   - CP_PROTECT reg programming fix
   - incorrect register shift fix
   - DSI blank screen fix

  sun4i:
   - hdmi output probing fix

  mcde:
   - DSI pipeline calc fix

  vc4:
   - out of bounds fix"

* tag 'drm-fixes-2021-06-11' of git://anongit.freedesktop.org/drm/drm:
  drm/msm/dsi: Stash away calculated vco frequency on recalc
  drm: Lock pointer access in drm_master_release()
  drm/mcde: Fix off by 10^3 in calculation
  drm/msm/a6xx: avoid shadow NULL reference in failure path
  drm/msm/a6xx: fix incorrectly set uavflagprd_inv field for A650
  drm/msm/a6xx: update/fix CP_PROTECT initialization
  radeon: use memcpy_to/fromio for UVD fw upload
  drm/amd/pm: Fix fall-through warning for Clang
  drm/amdgpu: Fix incorrect register offsets for Sienna Cichlid
  drm/amdgpu: Use drm_dbg_kms for reporting failure to get a GEM FB
  drm/amdgpu: switch kzalloc to kvzalloc in amdgpu_bo_create
  drm/msm: Init mm_list before accessing it for use_vram path
  drm: Fix use-after-free read in drm_getunique()
  drm/vc4: fix vc4_atomic_commit_tail() logic
  drm/ttm: fix deref of bo->ttm without holding the lock v2
  drm/sun4i: dw-hdmi: Make HDMI PHY into a platform device
2021-06-11 12:33:38 -07:00
Douglas Anderson
ab6f24b404 arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip
Putting the panel under the bridge chip (under the aux-bus node)
allows the panel driver to get access to the DP AUX bus, enabling all
sorts of fabulous new features.

While we're at this, get rid of a level of hierarchy for the panel
node. It doesn't need "ports / port" and can just have a "port" child.

For Linux, this patch has a hard requirement on the patches adding DP
AUX bus support to the ti-sn65dsi86 bridge chip driver. See the patch
("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus").

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.11.Ibdb7735fb1844561b902252215a69526a14f9abd@changeid
2021-06-11 12:31:59 -07:00
Douglas Anderson
4c1b3d94bf drm/bridge: ti-sn65dsi86: Improve probe errors with dev_err_probe()
As I was testing to make sure that the DEFER path worked well with my
patch series, I got tired of seeing this scary message in my logs just
because the panel needed to defer:
  [drm:ti_sn_bridge_probe] *ERROR* could not find any panel node

Let's use dev_err_probe() which nicely quiets this error and also
simplifies the code a tiny bit. We'll also update other places in the
file which can use dev_err_probe().

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.10.I24bba069e63b1eea84443eef0c8535fd032a6311@changeid
2021-06-11 12:31:52 -07:00
Douglas Anderson
a70e558c15 drm/bridge: ti-sn65dsi86: Don't read EDID blob over DDC
This is really just a revert of commit 58074b08c0 ("drm/bridge:
ti-sn65dsi86: Read EDID blob over DDC"), resolving conflicts.

The old code failed to read the EDID properly in a very important
case: before the bridge's pre_enable() was called. The way things need
to work:
1. Read the EDID.
2. Based on the EDID, decide on video settings and pixel clock.
3. Enable the bridge w/ the desired settings.

The way things were working:
1. Try to read the EDID but fail; fall back to hardcoded values.
2. Based on hardcoded values, decide on video settings and pixel clock.
3. Enable the bridge w/ the desired settings.
4. Try again to read the EDID, it works now!
5. Realize that the hardcoded settings weren't quite right.
6. Disable / reenable the bridge w/ the right settings.

The reasons for the failures were twofold:
a) Since we never ran the bridge chip's pre-enable then we never set
   the bit to ignore HPD. This meant the bridge chip didn't even _try_
   to go out on the bus and communicate with the panel.
b) Even if we fixed things to ignore HPD, the EDID still wouldn't read
   if the panel wasn't on.

Instead of reverting the code, we could fix it to set the HPD bit and
also power on the panel. However, it also works nicely to just let the
panel code read the EDID. Now that we've split the driver up we can
expose the DDC AUX channel bus to the panel node. The panel can take
charge of reading the EDID.

NOTE: in order for things to work, anyone that needs to read the EDID
will need to instantiate their panel using the new DP AUX bus (AKA by
listing their panel under the "aux-bus" node of the bridge chip in the
device tree).

In the future if we want to use the bridge chip to provide a full
external DP port (which won't have a panel) then we will have to
conditinally add EDID reading back in.

Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.9.I9330684c25f65bb318eff57f0616500f83eac3cc@changeid
2021-06-11 12:31:45 -07:00
Douglas Anderson
e0bbcc6233 drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus
We want to provide our panel with access to the DP AUX channel. The
way to do this is to let our panel be a child of ours using the fancy
new DP AUX bus support.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.8.Ib5fe0638da85800141ce141bb8e441c5f25438d4@changeid
2021-06-11 12:31:38 -07:00
Douglas Anderson
a1e3667a98 drm/bridge: ti-sn65dsi86: Promote the AUX channel to its own sub-dev
On its own, this change looks a little strange and doesn't do too much
useful. To understand why we're doing this we need to look forward to
future patches where we're going to probe our panel using the new DP
AUX bus. See the patch ("drm/bridge: ti-sn65dsi86: Add support for the
DP AUX bus").

Let's think about the set of steps we'll want to happen when we have
the DP AUX bus:

1. We'll create the DP AUX bus.
2. We'll populate the devices on the DP AUX bus (AKA our panel).
3. For setting up the bridge-related functions of ti-sn65dsi86 we'll
   need to get a reference to the panel.

If we do #1 - #3 in a single probe call things _mostly_ will work, but
it won't be massively robust. Let's explore.

First let's think of the easy case of no -EPROBE_DEFER. In that case
in step #2 when we populate the devices on the DP AUX bus it will
actually try probing the panel right away. Since the panel probe
doesn't defer then in step #3 we'll get a reference to the panel and
we're golden.

Second, let's think of the case when the panel returns
-EPROBE_DEFER. In that case step #2 won't synchronously create the
panel (it'll just add the device to the defer list to do it
later). Step #3 will fail to get the panel and the bridge sub-device
will return -EPROBE_DEFER. We'll depopulate the DP AUX bus. Later
we'll try the whole sequence again. Presumably the panel will
eventually stop returning -EPROBE_DEFER and we'll go back to the first
case where things were golden. So this case is OK too even if it's a
bit ugly that we have to keep creating / deleting the AUX bus over and
over.

So where is the problem? As I said, it's mostly about robustness. I
don't believe that step #2 (creating the sub-devices) is really
guaranteed to be synchronous. This is evidenced by the fact that it's
allowed to "succeed" by just sticking the device on the deferred
list. If anything about the process changes in Linux as a whole and
step #2 just kicks off the probe of the DP AUX endpoints (our panel)
in the background then we'd be in trouble because we might never get
the panel in step #3.

Adding an extra sub-device means we just don't need to worry about
it. We'll create the sub-device for the DP AUX bus and it won't go
away until the whole ti-sn65dsi86 driver goes away. If the bridge
sub-device defers (maybe because it can't find the panel) that won't
depopulate the DP AUX bus and so we don't need to worry about it.

NOTE: there's a little bit of a trick here. Though the AUX channel can
run without the MIPI-to-eDP bits of the code, the MIPI-to-eDP bits
can't run without the AUX channel. We could come up a complicated
signaling scheme (have the MIPI-to-eDP bits return EPROBE_DEFER for a
while or wait on some sort of completion), but it seems simple enough
to just not even bother creating the bridge device until the AUX
channel probes. That's what we'll do.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.7.If89144992cb9d900f8c91a8d1817dbe00f543720@changeid
2021-06-11 12:31:30 -07:00
Douglas Anderson
cc5a3fc041 drm/panel: panel-simple: Stash DP AUX bus; allow using it for DDC
If panel-simple is instantiated as a DP AUX bus endpoint then we have
access to the DP AUX bus. Let's stash it in the panel-simple
structure, leaving it NULL for the cases where the panel is
instantiated in other ways.

If we happen to have access to the DP AUX bus and we weren't provided
the ddc-i2c-bus in some other manner, let's use the DP AUX bus for it.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.6.I18e60221f6d048d14d6c50a770b15f356fa75092@changeid
2021-06-11 12:31:22 -07:00
Douglas Anderson
74c06c282a drm/panel: panel-simple: Allow panel-simple be a DP AUX endpoint device
The panel-simple driver can already have devices instantiated as
platform devices or MIPI DSI devices. Let's add a 3rd way to
instantiate it: as DP AUX endpoint devices.

At the moment there is no benefit to instantiating it in this way,
but:
- In the next patch we'll give it access to the DDC channel via the DP
  AUX bus.
- Possibly in the future we may use this channel to configure the
  backlight.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.5.Iada41f76a7342354bae929d0bb3ceba40f27f0ea@changeid
2021-06-11 12:31:13 -07:00
Douglas Anderson
aeb33699fc drm: Introduce the DP AUX bus
Historically "simple" eDP panels have been handled by panel-simple
which is a basic platform_device. In the device tree, the panel node
was at the top level and not connected to anything else.

Let's change it so that, instead, panels can be represented as being
children of the "DP AUX bus". Essentially we're saying that the
hierarchy that we're going to represent is the "control" connections
between devices. The DP AUX bus is a control bus provided by an eDP
controller (the parent) and consumed by a device like a panel (the
child).

The primary incentive here is to cleanly provide the panel driver the
ability to communicate over the AUX bus while handling lifetime issues
properly. The panel driver may want the AUX bus for controlling the
backlight or querying the panel's EDID.

The idea for this bus's design was hashed out over IRC [1].

[1] https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&date=2021-05-11

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Rajeev Nandan <rajeevny@codeaurora.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.4.I787c9ba09ed5ce12500326ded73a4f7c9265b1b3@changeid
2021-06-11 12:30:39 -07:00
Douglas Anderson
476c864dd4 dt-bindings: drm/bridge: ti-sn65dsi86: Add aux-bus child
The patch ("dt-bindings: drm: Introduce the DP AUX bus") talks about
how using the DP AUX bus is better than learning how to slice
bread. Let's add it to the ti-sn65dsi86 bindings.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.3.I98bf729846c37c4c143f6ab88b1e299280e2fe26@changeid
2021-06-11 12:29:42 -07:00
Douglas Anderson
feac44bad7 dt-bindings: drm: Introduce the DP AUX bus
We want to be able to list an eDP panel as a child of an eDP
controller node to represent the fact that the panel is connected to
the controller's DP AUX bus. Though the panel and the controller are
connected in several ways, the DP AUX bus is the primary control
interface between the two and thus makes the most sense to model in
device tree hierarchy.

Listing a panel in this way makes it possible for the panel driver to
easily get access to the DP AUX bus that it resides on, which can be
useful to help in auto-detecting the panel and for turning on various
bits.

NOTE: historically eDP panels were _not_ listed under their controller
but were listed at the top level of the device tree. This will still
be supported for backward compatibility (and while DP controller
drivers are adapted to support the new DT syntax) but should be
considered deprecated since there is no downside to listing the panel
under the controller.

For now, the DP AUX bus bindings will only support an eDP panel
underneath. It's possible it could be extended to allow having a DP
connector under it in the future.

NOTE: there is no "Example" in this bindings file. Yikes! This avoids
duplicating the same example lots of places. See users of the aux bus
(like ti-sn65dsi86) for examples.

The idea for this bus's design was hashed out over IRC [1].

[1] https://people.freedesktop.org/~cbrill/dri-log/?channel=dri-devel&date=2021-05-11

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.2.Id3c048d22e72a9f90084a543b5b4e3f43bc9ab62@changeid
2021-06-11 12:29:18 -07:00
Douglas Anderson
557acb5ffd dt-bindings: display: simple: List hpd properties in panel-simple
The HPD (Hot Plug Detect) signal is present in many (probably even
"most") eDP panels. For eDP, this signal isn't actually used for
detecting hot-plugs of the panel but is more akin to a "panel ready"
signal. After you provide power to the panel, panel timing diagrams
typically say that you should wait for HPD to be asserted (or wait a
fixed amount of time) before talking to the panel.

The panel-simple bindings describes many eDP panels and many of these
panels provide the HPD signal. We should add the HPD-related
properties to the panel-simple bindings. The HPD properties are
actually defined in panel-common.yaml, so adding them here just
documents that they are OK for panels handled by the panel-simple
bindings.

NOTE: whether or not we'd include HPD properties in the panel node is
more a property of the board design than the panel itself. For most
boards using these eDP panels everything "magically" works without
specifying any HPD properties and that's been why we haven't needed to
allow the HPD properties earlier. On these boards the HPD signal goes
directly to a dedicated "HPD" input to the eDP controller and this
connection doesn't need to be described in the device tree. The only
time the HPD properties are needed in the device tree are if HPD is
hooked up to a GPIO or if HPD is normally on the panel but isn't used
on a given board. That means that if we don't allow the HPD properties
in panel-simple then one could argue that we've got to boot all eDP
panels (or at least all those that someone could conceivably put on a
system where HPD goes to a GPIO or isn't hooked up) from panel-simple.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.1.Ieb731d23680db4700cc41fe51ccc73ba0b785fb7@changeid
2021-06-11 12:29:07 -07:00
José Roberto de Souza
0ea02bb8bc Revert "drm/i915/display: Drop FIXME about turn off infoframes"
Looks this FIXME is still valid as we need a way to tell LSPCON to
stop sending infoframes, so reverting it.

This reverts commit 3f409e4cd5.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210610194527.84997-1-jose.souza@intel.com
2021-06-11 12:20:53 -07:00
Zou Wei
6aa12138cd mtd: Convert list_for_each to entry variant
convert list_for_each() to list_for_each_entry() where
applicable.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1623155699-61935-1-git-send-email-zou_wei@huawei.com
2021-06-11 21:05:06 +02:00
Wei Yongjun
622096fdff gpio: idt3243x: Fix return value check in idt_gpio_probe()
In case of error, the function devm_platform_ioremap_resource_byname()
returns ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().

Fixes: 4195926aed ("gpio: Add support for IDT 79RC3243x GPIO controller")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-06-11 20:57:59 +02:00
Vignesh Raghavendra
6947ad6749 dt-bindings: mtd: Convert ti, am654-hbmc.txt to YAML schema
Convert ti,am654-hbmc.txt to YAML schema for better checks and
validations of DT.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2021-06-11 20:57:26 +02:00
Zhen Lei
828ed78655 mtd: inftl: remove unnecessary oom message
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message

Remove it can help us save a bit of memory.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210610022850.15397-1-thunder.leizhen@huawei.com
2021-06-11 20:44:21 +02:00
Zhen Lei
3d2fac0eee mtd: amd76xrom: remove unnecessary oom message
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message

Remove it can help us save a bit of memory.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210610022631.15344-1-thunder.leizhen@huawei.com
2021-06-11 20:44:18 +02:00
Zhen Lei
042bf272d5 mtd: ck804xrom: remove unnecessary oom message
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message

Remove it can help us save a bit of memory.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210610022416.15291-1-thunder.leizhen@huawei.com
2021-06-11 20:44:14 +02:00
Zhen Lei
bb89d137b2 mtd: esb2rom: remove unnecessary oom message
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message

Remove it can help us save a bit of memory.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210610022239.15238-1-thunder.leizhen@huawei.com
2021-06-11 20:44:07 +02:00
Zhen Lei
4883307c6d mtd: ichxrom: remove unnecessary oom message
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message

Remove it can help us save a bit of memory.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210610022100.15185-1-thunder.leizhen@huawei.com
2021-06-11 20:43:58 +02:00
Zhen Lei
4a7bd5e966 mtd: sun_uflash: remove unnecessary oom message
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message

Remove it can help us save a bit of memory.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210610021400.15132-1-thunder.leizhen@huawei.com
2021-06-11 20:43:52 +02:00