Fixes the following W=1 kernel build warning(s):
drivers/bus/qcom-ebi2.c:112: warning: Function parameter or member 'slow_cfg' not described in 'cs_data'
drivers/bus/qcom-ebi2.c:112: warning: Function parameter or member 'fast_cfg' not described in 'cs_data'
Reviewed-by: Linus Walleij <linus.walleij@linaro.org
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210526081038.544942-8-lee.jones@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tony Nguyen says:
====================
1GbE Intel Wired LAN Driver Updates 2021-05-26
Jesse Brandeburg says:
In this series I address the C=2 (sparse) warnings. The goal is to be
completely sparse clean in the drivers/net/ethernet/intel directory.
This can help us run this tool for every patch, and helps the kernel
code by reducing technical debt.
NOTE: there is one warning left in ixgbe XDP code using rcu_assign_pointer().
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ixgbe: reduce checker warnings
ixgbe: use checker safe conversions
igbvf: convert to strongly typed descriptors
intel: call csum functions with well formatted arguments
igb: override two checker warnings
igb: fix assignment on big endian machines
igb: handle vlan types with checker enabled
igb/igc: use strongly typed pointer
fm10k: move error check
intel: remove checker warning
e100: handle eeprom as little endian
====================
Link: https://lore.kernel.org/r/20210526172346.3515587-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The i.MX8MM VPU power up sequence is a bit special, it must follow:
1. request power up
2. reset assert
3. reset deassert
This change in this patch will not affect other domains, because
the power domain default is in asserted state, unless bootloader
deassert the reset. It also applies to GPU power domain.
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With the BLK-CTL driver now in place, let's add the missing domains.
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for the power domains found on i.MX8MM. The 2D and 3D
GPU domains are abstracted as a single domain in the driver, as they can't
be powered up/down individually due to a shared reset.
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The CYTTSP TMA340 chips have two supplies: VCPIN and
VDD for analog and digital voltage respectively.
Add some minimal code to obtain and enable these
regulators if need be.
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526230352.1433537-3-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver (both SPI and I2C interface) should probe from the compatible
strings, cypress,cy8ctma340 etc when using device tree, not as now, where
it is probing implicitly from the I2C/SPI node name "cypress,cyttsp-i2c"
etc.
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526230352.1433537-2-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This converts the CYTTSP "Cypress TrueTouch Standard Product"
to YAML bindings and fixes and adds some things in the process:
- Rename the bindings file to cypress,cy8ctma340 after the main
product in the series.
- Add proper compatibles for the two known products:
CY8CTMA340 and CY8CTST341.
- Deprecate "cypress,cyttsp-spi" and "cypress,cyttsp-i2c"
because device compatibles should be named after the
hardware and not after which bus they are connected to.
The topology implicitly tells us which bus it is and what
interface to used.
- Add VCPIN and VDD supplies, these are present just like
on the CY8CTMA140.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526230352.1433537-1-linus.walleij@linaro.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Refactor the code according to the use of a flexible-array member in struct
i40e_qvlist_info instead of one-element array, and use the struct_size()
helper.
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
By using outlined checks we can achieve a significant code size
improvement by moving the tag-based ASAN checks into separate
functions. Unlike the existing CONFIG_KASAN_OUTLINE mode these
functions have a custom calling convention that preserves most
registers and is specialized to the register containing the address
and the type of access, and as a result we can eliminate the code
size and performance overhead of a standard calling convention such
as AAPCS for these functions.
This change depends on a separate series of changes to Clang [1] to
support outlined checks in the kernel, although the change works fine
without them (we just don't get outlined checks). This is because the
flag -mllvm -hwasan-inline-all-checks=0 has no effect until the Clang
changes land. The flag was introduced in the Clang 9.0 timeframe as
part of the support for outlined checks in userspace and because our
minimum Clang version is 10.0 we can pass it unconditionally.
Outlined checks require a new runtime function with a custom calling
convention. Add this function to arch/arm64/lib.
I measured the code size of defconfig + tag-based KASAN, as well
as boot time (i.e. time to init launch) on a DragonBoard 845c with
an Android arm64 GKI kernel. The results are below:
code size boot time
CONFIG_KASAN_INLINE=y before 92824064 6.18s
CONFIG_KASAN_INLINE=y after 38822400 6.65s
CONFIG_KASAN_OUTLINE=y 39215616 11.48s
We can see straight away that specialized outlined checks beat the
existing CONFIG_KASAN_OUTLINE=y on both code size and boot time
for tag-based ASAN.
As for the comparison between CONFIG_KASAN_INLINE=y before and after
we saw similar performance numbers in userspace [2] and decided
that since the performance overhead is minimal compared to the
overhead of tag-based ASAN itself as well as compared to the code
size improvements we would just replace the inlined checks with the
specialized outlined checks without the option to select between them,
and that is what I have implemented in this patch.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://linux-review.googlesource.com/id/I1a30036c70ab3c3ee78d75ed9b87ef7cdc3fdb76
Link: [1] https://reviews.llvm.org/D90426
Link: [2] https://reviews.llvm.org/D56954
Link: https://lore.kernel.org/r/20210526174927.2477847-3-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Merge in stack unwinding work to cater for 8-byte aligned stack frames
which may be generated following optimisations to CONFIG_KASAN_OUTLINE.
* for-next/stacktrace:
arm64: stacktrace: Relax frame record alignment requirement to 8 bytes
arm64: Change the on_*stack functions to take a size argument
arm64: Implement stack trace termination record
-----BEGIN PGP SIGNATURE-----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=KSlG
-----END PGP SIGNATURE-----
Merge tag 'vfio-ccw-20210520' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes
Avoid some races in vfio-ccw request handling.
* tag 'vfio-ccw-20210520' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw:
vfio-ccw: Serialize FSM IDLE state with I/O completion
vfio-ccw: Reset FSM state to IDLE inside FSM
vfio-ccw: Check initialized flag in cp_init()
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Now that we have a consistent place to initialize CPU context registers
early in the boot path, let's also initialize the per-cpu offset here.
This makes the primary and secondary boot paths more consistent, and
allows for the use of per-cpu operations earlier, which will be
necessary for instrumentation with KCSAN.
Note that smp_prepare_boot_cpu() still needs to re-initialize CPU0's
offset as immediately prior to this the per-cpu areas may be
reallocated, and hence the boot-time offset may be stale. A comment is
added to make this clear.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210520115031.18509-7-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Once we enable the MMU, we have to initialize:
* SP_EL0 to point at the active task
* SP to point at the active task's stack
* SCS_SP to point at the active task's shadow stack
For all tasks (including init_task), this information can be derived
from the task's task_struct.
Let's unify __primary_switched and __secondary_switched to consistently
acquire this information from the relevant task_struct. At the same
time, let's fold this together with initializing a task's final frame.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210520115031.18509-6-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When we boot a secondary CPU, we pass it a task and a stack to use. As
the stack is always the task's stack, which can be derived from the
task, let's have the secondary CPU derive this itself and avoid passing
redundant information.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210520115031.18509-5-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
All reads and writes of secondary_data occur with the MMU on, using
coherent attributes, so there's no need to perform any cache maintenance
for this.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210520115031.18509-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210520115031.18509-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Merge in stack unwinding work to minimise conflicts in head.S.
* for-next/stacktrace:
arm64: stacktrace: Relax frame record alignment requirement to 8 bytes
arm64: Change the on_*stack functions to take a size argument
arm64: Implement stack trace termination record
Most of the MEM_* APIs share the same parameters, so they can be
generalised. Currently only MEM_SHARE is implemented and the user space
interface for that is not added yet.
Link: https://lore.kernel.org/r/20210521151033.181846-6-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Parse the FFA nodes from the device-tree and register all the partitions
whose services will be used in the kernel.
In order to also enable in-kernel users of FFA interface, let us add
simple set of operations for such devices.
The in-kernel users are registered without the character device interface.
Link: https://lore.kernel.org/r/20210521151033.181846-5-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
There are requests to keep the transport separate in order to allow
other possible transports like virtio. So let us keep the SMCCC transport
specific routines abstracted.
It is kept simple for now. Once we add another transport, we can develop
better abstraction.
Link: https://lore.kernel.org/r/20210521151033.181846-4-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This just add a basic driver that sets up the transport(e.g. SMCCC),
checks the FFA version implemented, get the partition ID for self and
sets up the Tx/Rx buffers for communication.
Link: https://lore.kernel.org/r/20210521151033.181846-3-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The Arm FF for Armv8-A specification has concept of endpoints or
partitions. In the Normal world, a partition could be a VM when
the Virtualization extension is enabled or the kernel itself.
In order to handle multiple partitions, we can create a FFA device for
each such partition on a dedicated FFA bus. Similarly, different drivers
requiring FFA transport can be registered on the same bus. We can match
the device and drivers using UUID. This is mostly for the in-kernel
users with FFA drivers.
Link: https://lore.kernel.org/r/20210521151033.181846-2-sudeep.holla@arm.com
Tested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The GMID_EL1.BS field determines the number of tags accessed by the
LDGM/STGM instructions (EL1 and up), used by the kernel for copying or
zeroing page tags.
Taint the kernel if GMID_EL1.BS differs between CPUs but only of
CONFIG_ARM64_MTE is enabled.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Link: https://lore.kernel.org/r/20210526193621.21559-3-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The architecture has been updated and the CTR_EL0, CNTFRQ_EL0,
DCZID_EL0, MIDR_EL1, REVIDR_EL1 registers are all 64-bit, even if most
of them have a RES0 top 32-bit.
Change their type to u64 in struct cpuinfo_arm64.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Suzuki K Poulose <Suzuki.Poulose@arm.com>
Link: https://lore.kernel.org/r/20210526193621.21559-2-catalin.marinas@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
It is helpful to see what state of CS signal was during one
or another SPI operation. All the same for SPI setup.
Enable tracing of the SPI setup and CS selection.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Message-Id: <20210526195655.75691-1-andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the phydev::dev_flags bit allocation to allow bits 15:0 to
define PHY driver specific behavior, bits 23:16 to be reserved for now,
and bits 31:24 to hold generic PHY driver flags.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20210526184617.3105012-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some labels are only used once, so we delete them and use the
return statement instead of the goto statement.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210526011624.11204-1-samirweng1979@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In function st95hf_in_send_cmd, the variable rc is assigned then goto
error label, which just returns rc, so we use return to replace it.
Since error label only used once in the function, so we remove error label.
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210526005651.12652-1-samirweng1979@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation to enable -Wimplicit-fallthrough for Clang, fix
the following warnings by replacing /* fall through */ comments,
and its variants, with the new pseudo-keyword macro fallthrough:
fs/xfs/libxfs/xfs_alloc.c:3167:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_da_btree.c:286:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_ag_resv.c:346:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/libxfs/xfs_ag_resv.c:388:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_bmap_util.c:246:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_export.c:88:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_export.c:96:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_file.c:867:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_ioctl.c:562:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_ioctl.c:1548:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_iomap.c:1040:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_inode.c:852:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_log.c:2627:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/xfs_trans_buf.c:298:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/bmap.c:275:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/btree.c:48:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/common.c:85:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/common.c:138:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/common.c:698:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/dabtree.c:51:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/repair.c:951:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
fs/xfs/scrub/agheader.c:89:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Notice that Clang doesn't recognize /* fall through */ comments as
implicit fall-through markings, so in order to globally enable
-Wimplicit-fallthrough for Clang, these comments need to be
replaced with fallthrough; in the whole codebase.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Change all the places in the mlx5_ib driver to take the qp type from the
mlx5_ib_qp struct, except the QP initialization flow. It will ensure that
we check the right QP type also for vendor specific QPs.
Link: https://lore.kernel.org/r/b2e16cd65b59cd24fa81c01c7989248da44e58ea.1621413899.git.leonro@nvidia.com
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Framebuffer devices that are registered by DRM drivers for fbdev emulation
have a "drmfb" suffix in their name. But makes them to be quite confusing
for drivers that already have "drm" in their name:
$ cat /proc/fb
0 rockchipdrmdrmfb
$ cat /proc/fb
0 simpledrmdrmfb
Also, there isn't a lot of value in adding these "drmfb" suffices to their
names, since users shouldn't really care if the FB devices were registered
by a real fbdev driver or a DRM driver using the fbdev emulation.
What programs should be interested about is if there's a DRM device, and
there are better ways to query that info than reading this procfs entry.
So let's just remove the suffix, which leads to much better device names:
$ cat /proc/fb
0 rockchipdrm
$ cat /proc/fb
0 simpledrm
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210525151313.3379622-1-javierm@redhat.com
When the SVE vector length is 128 bits then there are no bits in the Z
registers which are not shared with the V registers so we can skip them
when zeroing state not shared with FPSIMD, this results in a minor
performance improvement.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210512151131.27877-4-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
This makes the code a bit clearer and as a result we can also make the
indentation more normal, there is no change to the generated code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210512151131.27877-3-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Trivial refactoring to support further work, no change to generated code.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20210512151131.27877-2-broonie@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Both of if and else parts append exactly 12 hex chars, but in
different ways.
Factor out the else part because we need to support it without relying
on git-describe. Remove the --abbrev=12 option since we do not use the
hash from git-describe anyway.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
This script stumbled on the read-only source tree over again:
- a2bb90a08c ("kbuild: fix delay in setlocalversion on readonly
source")
- cdf2bc632e ("scripts/setlocalversion on write-protected source
tree")
- 8ef14c2c41 ("Revert "scripts/setlocalversion: git: Make -dirty
check more robust"")
- ff64dd4857 ("scripts/setlocalversion: Improve -dirty check with
git-status --no-optional-locks")
Add comments to clarify that this script should never ever try to write
to the source tree.
'git describe --dirty' might look as a simple solution for appending
the -dirty string, but we cannot use it because it creates the
.git/index.lock file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
This reverts commit b052ce4c84 ("kbuild: fix false positive -dirty
tag caused by make-kpkg").
If I understand correctly, this problem occurred in very old versions
of make-kpkg. When I tried a newer version, make-kpkg did not touch
scripts/package/Makefile.
Anyway, Debian uses 'make deb-pkg' instead of make-kpkg these days.
Debian handbook [1] mentions it as "the good old days":
"CULTURE The good old days of kernel-package
Before the Linux build system gained the ability to build proper
Debian packages, the recommended way to build such packages was to
use make-kpkg from the kernel-package package."
[1]: https://debian-handbook.info/browse/stable/sect.kernel-compilation.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
The mercurial, svn, git-svn supports were added by the following commits:
- 3dce174cfc ("kbuild: support mercurial in setlocalversion")
- ba3d05fb63 ("kbuild: add svn revision information to setlocalversion")
- ff80aa97c9 ("setlocalversion: add git-svn support")
They did not explain why they are useful for the kernel source tree.
Let's revert all of them, and see if somebody will complain about it.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
There were efforts to make 'make -s' really silent when it is a
warning-free build.
The conventional way was to let a shell script check ${quiet}, and if
it is 'silent_', suppress the stdout by itself.
With the previous commit, the 'cmd' takes care of it now. The 'cmd' is
also invoked from if_changed, if_changed_dep, and if_changed_rule.
You can omit ${quiet} checks in shell scripts when they are invoked
from the 'cmd' macro.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When building with 'make -s', no output to stdout should be printed.
As Arnd Bergmann reported [1], mkimage shows the detailed information
of the generated images.
I think this should be suppressed by the 'cmd' macro instead of by
individual scripts.
Insert 'exec >/dev/null;' in order to redirect stdout to /dev/null for
silent builds.
[Note about this implementation]
'exec >/dev/null;' may look somewhat tricky, but this has a reason.
Appending '>/dev/null' at the end of command line is a common way for
redirection, so I first tried this:
cmd = @set -e; $(echo-cmd) $(cmd_$(1)) >/dev/null
... but it would not work if $(cmd_$(1)) itself contains a redirection.
For example, cmd_wrap in scripts/Makefile.asm-generic redirects the
output from the 'echo' command into the target file.
It would be expanded into:
echo "#include <asm-generic/$*.h>" > $@ >/dev/null
Then, the target file gets empty because the string will go to /dev/null
instead of $@.
Next, I tried this:
cmd = @set -e; $(echo-cmd) { $(cmd_$(1)); } >/dev/null
The form above would be expanded into:
{ echo "#include <asm-generic/$*.h>" > $@; } >/dev/null
This works as expected. However, it would be a syntax error if
$(cmd_$(1)) is empty.
When CONFIG_TRIM_UNUSED_KSYMS is disabled, $(call cmd,gen_ksymdeps) in
scripts/Makefile.build would be expanded into:
set -e; { ; } >/dev/null
..., which causes an syntax error.
I also tried this:
cmd = @set -e; $(echo-cmd) ( $(cmd_$(1)) ) >/dev/null
... but this causes a syntax error for the same reason.
So, finally I adopted:
cmd = @set -e; $(echo-cmd) exec >/dev/null; $(cmd_$(1))
[1]: https://lore.kernel.org/lkml/20210514135752.2910387-1-arnd@kernel.org/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The AAPCS places no requirements on the alignment of the frame
record. In theory it could be placed anywhere, although it seems
sensible to require it to be aligned to 8 bytes. With an upcoming
enhancement to tag-based KASAN Clang will begin creating frame records
located at an address that is only aligned to 8 bytes. Accommodate
such frame records in the stack unwinding code.
As pointed out by Mark Rutland, the userspace stack unwinding code
has the same problem, so fix it there as well.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/Ia22c375230e67ca055e9e4bb639383567f7ad268
Acked-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210526174927.2477847-2-pcc@google.com
Signed-off-by: Will Deacon <will@kernel.org>