When any CPU comes online, it checks to see if an RCU-boost kthread has
already been created for that CPU's leaf rcu_node structure, and if
not, it creates one. Unfortunately, it also verifies that this leaf
rcu_node structure actually has at least one online CPU, and if not,
it declines to create the kthread. Although this behavior makes sense
during early boot, especially on systems that claim far more CPUs than
they actually have, it makes no sense for the first CPU to come online
for a given rcu_node structure. There is no point in checking because
we know there is a CPU on its way in.
The problem is that timing differences can cause this incoming CPU to not
yet be reflected in the various bit masks even at rcutree_online_cpu()
time, and there is no chance at rcutree_prepare_cpu() time. Plus it
would be better to create the RCU-boost kthread at rcutree_prepare_cpu()
to handle the case where the CPU is involved in an RCU priority inversion
very shortly after it comes online.
This commit therefore moves the checking to rcu_prepare_kthreads(), which
is called only at early boot, when the check is appropriate. In addition,
it makes rcutree_prepare_cpu() invoke rcu_spawn_one_boost_kthread(), which
no longer does any checking for online CPUs.
With this change, RCU priority boosting tests now pass for short rcutorture
runs, even with single-CPU leaf rcu_node structures.
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Scott Wood <swood@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds each rcu_node structure's ->qsmask and "bBEG" output
indicating whether: (1) There is a boost kthread, (2) A reader needs
to be (or is in the process of being) boosted, (3) A reader is blocking
an expedited grace period, and (4) A reader is blocking a normal grace
period. This helps diagnose RCU priority boosting failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If another lockdep report runs concurrently with an RCU lockdep report
from RCU_LOCKDEP_WARN(), the following sequence of events can occur:
1. debug_lockdep_rcu_enabled() sees that lockdep is enabled
when called from (say) synchronize_rcu().
2. Lockdep is disabled by a concurrent lockdep report.
3. debug_lockdep_rcu_enabled() evaluates its lockdep-expression
argument, for example, lock_is_held(&rcu_bh_lock_map).
4. Because lockdep is now disabled, lock_is_held() plays it safe and
returns the constant 1.
5. But in this case, the constant 1 is not safe, because invoking
synchronize_rcu() under rcu_read_lock_bh() is disallowed.
6. debug_lockdep_rcu_enabled() wrongly invokes lockdep_rcu_suspicious(),
resulting in a false-positive splat.
This commit therefore changes RCU_LOCKDEP_WARN() to check
debug_lockdep_rcu_enabled() after checking the lockdep expression,
so that any "safe" returns from lock_is_held() are rejected by
debug_lockdep_rcu_enabled(). This requires memory ordering, which is
supplied by READ_ONCE(debug_locks). The resulting volatile accesses
prevent the compiler from reordering and the fact that only one variable
is being accessed prevents the underlying hardware from reordering.
The combination works for IA64, which can reorder reads to the same
location, but this is defeated by the volatile accesses, which compile
to load instructions that provide ordering.
Reported-by: syzbot+dde0cc33951735441301@syzkaller.appspotmail.com
Reported-by: Matthew Wilcox <willy@infradead.org>
Reported-by: syzbot+88e4f02896967fe1ab0d@syzkaller.appspotmail.com
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The reason that lockdep_rcu_suspicious() prints the value of debug_locks
is because a value of zero indicates a likely false positive. This can
work, but is a bit obtuse. This commit therefore explicitly calls out
the possibility of a false positive.
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds ->gp_max to show_rcu_gp_kthreads() output in order to
better diagnose RCU priority boosting failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds ->rt_priority and ->gp_start to show_rcu_gp_kthreads()
output in order to better diagnose RCU priority boosting failures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, rcu_spawn_core_kthreads() is invoked via an early_initcall(),
which works, except that rcu_spawn_gp_kthread() is also invoked via an
early_initcall() and rcu_spawn_core_kthreads() relies on adjustments to
kthread_prio that are carried out by rcu_spawn_gp_kthread(). There is
no guaranttee of ordering among early_initcall() handlers, and thus no
guarantee that kthread_prio will be properly checked and range-limited
at the time that rcu_spawn_core_kthreads() needs it.
In most cases, this bug is harmless. After all, the only reason that
rcu_spawn_gp_kthread() adjusts the value of kthread_prio is if the user
specified a nonsensical value for this boot parameter, which experience
indicates is rare.
Nevertheless, a bug is a bug. This commit therefore causes the
rcu_spawn_core_kthreads() function to be invoked directly from
rcu_spawn_gp_kthread() after any needed adjustments to kthread_prio have
been carried out.
Fixes: 48d07c04b4 ("rcu: Enable elimination of Tree-RCU softirq processing")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit cleans up some comments and code in kernel/rcu/tree.c.
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 9ee01e0f69 ("x86/entry: Clean up idtentry_enter/exit()
leftovers") left the rcu_irq_exit_preempt() in place in order to avoid
conflicts with the -rcu tree. Now that this change has long since hit
mainline, this commit removes the no-longer-used rcu_irq_exit_preempt()
function.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Lorenz Bauer says:
====================
github.com/cilium/ebpf runs integration tests with libbpf in a vm on CI.
I recently did some work to increase the code coverage from that, and
started experiencing OOM-kills in the VM. That led me down a rabbit
hole looking at verifier memory allocation patterns. I didn't figure out
what triggered the OOM-kills but refactored some often called memory
allocation code.
The key insight is that often times we don't need to do a full kfree /
kmalloc, but can instead just reallocate. The first patch adds two helpers
which do just that for the use cases in the verifier, which are sufficiently
different that they can't use stock krealloc_array and friends.
The series makes bpf_verif_scale about 10% faster in my VM set up, which
is especially noticeable when running with KASAN enabled.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
func_states_equal makes a very short lived allocation for idmap,
probably because it's too large to fit on the stack. However the
function is called quite often, leading to a lot of alloc / free
churn. Replace the temporary allocation with dedicated scratch
space in struct bpf_verifier_env.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/bpf/20210429134656.122225-4-lmb@cloudflare.com
Resizing and copying stack and reference tracking state currently
does a lot of kfree / kmalloc when the size of the tracked set changes.
The logic in copy_*_state and realloc_*_state is also hard to follow.
Refactor this into two core functions. copy_array copies from a source
into a destination. It avoids reallocation by taking the allocated
size of the destination into account via ksize(). The function is
essentially krealloc_array, with the difference that the contents of
dst are not preserved. realloc_array changes the size of an array and
zeroes newly allocated items. Contrary to krealloc both functions don't
free the destination if the size is zero. Instead we rely on free_func_state
to clean up.
realloc_stack_state is renamed to grow_stack_state to better convey
that it never shrinks the stack state.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210429134656.122225-2-lmb@cloudflare.com
To make the purpose of the code more apparent, this commit moves the
tests of mem_dump_obj() to a new rcu_torture_mem_dump_obj() function
and calls it from rcu_torture_cleanup().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, if a torture scenario requires more CPUs than are present
on the build system, kvm.sh and friends limit the CPUs available to
that scenario. This makes total sense when the build system and the
system running the scenarios are one and the same, but not so much when
remote systems might well have more CPUs.
This commit therefore introduces a --remote flag to kvm.sh that suppresses
this CPU-limiting behavior, and causes kvm-remote.sh to use this flag.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In a long-duration kvm-remote.sh run, almost all of the remote accesses will
be simple file-existence checks. These are thus the most likely to be caught
out by network failures, which do happen from time to time.
This commit therefore takes a first step towards tolerating temporary
network outages by making the file-existence checks repeat in the face of
such an outage. They also print a message every minute during a outage,
allowing the user to take appropriate action.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It will frequently be the case that rcu_torture_boost() will get a
->start_gp_poll() cookie that needs almost all of the current grace period
plus an additional grace period to elapse before ->poll_gp_state() will
return true. It is quite possible that the current grace period will have
(say) two seconds of stall by a CPU failing to pass through a quiescent
state, followed by 300 milliseconds of delay due to a preempted reader.
The next grace period might suffer only one second of stall by a CPU,
followed by another 300 milliseconds of delay due to a preempted reader.
This is an example of RCU priority boosting doing its job, but the full
elapsed time of 3.6 seconds exceeds the 3.5-second limit. In addition,
there is no CPU stall in force at the 3.5-second mark, so this would
nevertheless currently be counted as an RCU priority boosting failure.
This commit therefore avoids this sort of false positive by resetting
the gp_state_time timestamp any time that the current grace period is
being blocked by a CPU. This results in extremely frequent calls to
the ->check_boost_failed() function, so this commit provides a lockless
fastpath that is selected by supplying a NULL CPU-number pointer.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, rcu_torture_boost() runs CPU-bound at real-time priority
to force RCU priority inversions. It then checks that grace periods
progress during this CPU-bound time. If grace periods fail to progress,
it reports and RCU priority boosting failure.
However, it is possible (and sometimes does happen) that the grace period
fails to progress due to a CPU failing to pass through a quiescent state
for an extended time period (3.5 seconds by default). This can happen
due to vCPU preemption, long-running interrupts, and much else besides.
There is nothing that RCU priority boosting can do about these situations,
and so they should not be counted as RCU priority boosting failures.
This commit therefore checks for CPUs (as opposed to preempted tasks)
holding up a grace period, and flags the resulting RCU priority boosting
failures, but does not splat nor count them as errors. It does rate-limit
them to avoid flooding the console log.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the BUSTED-BOOST rcutorture scenario, which can be
used to test rcutorture's ability to test RCU priority boosting.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It is possible that a delayed grace period that rcu_torture_boost()
was polling for ended while rcu_torture_boost_failed() was printing the
failure splat. It would be good to know when this happens. This commit
therefore has rcu_torture_boost_failed() recheck the grace period after
printing the splat, and printing a message indicating whether or not
the grace period has ended.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit consolidates two loops in rcu_torture_boost(), one of which
counts the number of boost-test episodes and the other of which computes
the start time of the next episode, into one loop that does both with but
a single acquisition of boost_mutex. This means that the count of the
number of boost-test episodes is incremented after an episode completes
rather than before it starts, but it also avoids the over-counting that
was possible previously.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
If an rcu_torture_boost() kthread determines that its grace period
has not yet ended, it invokes rcu_torture_boost_failed() which checks
whether enough time has elapsed for this to be considered a failure of
RCU priority boosting, and, if so, flags the error.
Unfortunately, that kthread might be preempted for some seconds between
the time that it checks the grace period and the time that it checks the
time. This delay can result in a false positive, featuring a complaint
that a particular grace period has not ended, followed by a diagnostic
dump featuring a much later grace period.
This commit avoids these false positives by rechecking for the end of
the grace period after the time check.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Some of the code invoked directly and indirectly from kvm.sh parses
the output of commands. This parsing assumes English, which can cause
failures if the user has set some other language. In a few cases,
there are language-independent commands available, but this is not
always the case. Therefore, as an alternative to polyglot parsing,
this commit sets the LANG environment variable to en_US.UTF-8.
Reported-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Grepping for "CPU" on lscpu output isn't always successful, depending
on the local language setting. As a result, the build can be aborted
early with:
"make: the '-j' option requires a positive integer argument"
This commit therefore uses the human-language-independent approach
available via the getconf command, both in kvm-build.sh and in
kvm-remote.sh.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, rcutorture's testing of RCU priority boosting insists not
only that grace periods complete, but also that callbacks be invoked.
Although this is in fact what the user would want, ensuring that there
is sufficient CPU bandwidth devoted to callback execution is in fact
the user's responsibility. One could argue that rcutorture can take on
that responsibility, which is true in theory. But in practice, ensuring
sufficient CPU bandwidth to ksoftirqd, any rcuc kthreads, and any rcuo
kthreads is not particularly consistent with rcutorture's main job,
that of stress-testing RCU. In addition, if the system administrator
(say) makes very poor choices when pinning rcuo kthreads and then runs
rcutorture, there really isn't much rcutorture can do.
Besides, RCU priority boosting only boosts lagging readers, not all the
machinery required to invoke callbacks in a timely fashion.
This commit therefore switches rcutorture's evaluation of RCU priority
boosting from callback execution to grace-period completion by using
the new start_poll_synchronize_rcu() and poll_state_synchronize_rcu()
functions. When rcutorture is built in (as in when there is no innocent
workload to inconvenience), the ksoftirqd ktheads are boosted to real-time
priority 2 in order to allow timeouts to work properly in the face of
rcutorture's testing of RCU priority boosting.
Indeed, it is not as easy as it looks to create a reliable test of RCU
priority boosting without destroying the rest of the kernel!
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, kvm-find-errors.sh assumes that if "--buildonly" appears in
the log file, then the run did builds but ran no kernels. This breaks
with kvm-remote.sh, which uses kvm.sh to do a build, then kvm-again.sh
to run the kernels built on remote systems. This commit therefore adds
a check for a kvm-remote.sh run.
While in the area, this commit checks for "--build-only" as well as
"--build-only".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Given remote rcutorture runs, it is quite possible that the build system
will have fewer CPUs than the system(s) running the actual test scenarios.
In such cases, using the number of CPUs on the test systems can overload
the build system, slowing down the build or, worse, OOMing the build
system. This commit therefore uses the build system's CPU count to set
N in "make -jN", and by tradition sets "N" to double the CPU count.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit reduces duplicate code by making kvm.sh use the new
kvm-end-run-stats.sh script rather than taking its historical approach
of open-coding it.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit abstractst the end-of-run summary from kvm-again.sh, and,
while in the area, brings its format into line with that of kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm-again.sh script relies on shell comments added to the qemu-cmd
file, but this means that code extracting values from the QEMU command in
this file must grep out those commment. Which kvm-recheck-rcu.sh failed
to do, which destroyed its grace-period-per-second calculation. This
commit therefore adds the needed "grep -v '^#'" to kvm-recheck-rcu.sh.
Fixes: 315957cad4 ("torture: Prepare for splitting qemu execution from kvm-test-1-run.sh")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a (*readlock_held)() function pointer to the
rcu_torture_ops structure in order to make the rcu_torture_one_read()
function's rcu_dereference_check() lockdep expression more appropriate
for a given run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds scale_type of acqrel, lock, and lock-irq to
test acquisition and release. Note that the refscale.nreaders=1
module parameter is required if you wish to test uncontended locking.
In contrast, acqrel uses a per-CPU variable, so should be just fine with
large values of the refscale.nreaders=1 module parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a kvm-remote.sh script that prepares a tarball that
is then downloaded to the remote system(s) and executed. The user is
responsible for having set up the remote systems to run qemu, but all the
kernel builds are done on the system running the kvm-remote.sh script.
The user is also responsible for setting up the remote systems so that
ssh can be run non-interactively, given that ssh is used to poll the
remote systems in order to detect completion of each batch.
See the script's header comment for usage information.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It is no longer possible to disable CPU hotplug in many configurations,
which means that the CONFIG_HOTPLUG_CPU=n lines in rcuscale's Kconfig
options are just a source of useless diagnostics. In addition, rcuscale
doesn't do CPU-hotplug operations in any case. This commit therefore
changes these lines to read CONFIG_HOTPLUG_CPU=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
It is no longer possible to disable CPU hotplug in many configurations,
which means that the CONFIG_HOTPLUG_CPU=n lines in refscale's Kconfig
options are just a source of useless diagnostics. In addition, refscale
doesn't do CPU-hotplug operations in any case. This commit therefore
changes these lines to read CONFIG_HOTPLUG_CPU=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit saves a few lines of code by making kvm-again.sh use the
"scenarios" file rather than the "batches" file, both of which are
generated by kvm.sh.
This results in a break point because new versions of kvm-again.sh cannot
handle "res" directories produced by old versions of kvm.sh, which lack
the "scenarios" file. In the unlikely event that this becomes a problem,
a trivial script suffices to convert the "batches" file to a "scenarios"
file, and this script may be easily extracted from kvm.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds "--dryrun scenarios" to kvm.sh, which prints something
like this:
1. TREE03
2. TREE07
3. SRCU-P SRCU-N
4. TREE01 TRACE01
5. TREE02 TRACE02
6. TREE04 RUDE01 TASKS01
7. TREE05 TASKS03 SRCU-T SRCU-U
8. TASKS02 TINY01 TINY02 TREE09
This format is more convenient for scripts that run batches of scenarios.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although "eval" was removed from torture.sh, that commit failed to
update the KCSAN instance of $* to "$@". This results in failures when
(for example) --bootargs is given more than one argument. This commit
therefore makes this change.
There is one remaining instance of $* in torture.sh, but this
is used only in the "echo" command, where quoting doesn't matter
so much.
Fixes: 197220d4a3 ("torture: Remove use of "eval" in torture.sh")
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a block comment that gives a high-level overview of
how RCU Rude grace periods progress. It also gives an overview of the
memory ordering.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a block comment that gives a high-level overview of how
RCU tasks grace periods progress. It also adds a note about how exiting
tasks are handled, plus it gives an overview of the memory ordering.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
An srcu_struct structure that is initialized before rcu_init_geometry()
will have its srcu_node hierarchy based on CONFIG_NR_CPUS. Once
rcu_init_geometry() is called, this hierarchy is compressed as needed
for the actual maximum number of CPUs for this system.
Later on, that srcu_struct structure is confused, sometimes referring
to its initial CONFIG_NR_CPUS-based hierarchy, and sometimes instead
to the new num_possible_cpus() hierarchy. For example, each of its
->mynode fields continues to reference the original leaf rcu_node
structures, some of which might no longer exist. On the other hand,
srcu_for_each_node_breadth_first() traverses to the new node hierarchy.
There are at least two bad possible outcomes to this:
1) a) A callback enqueued early on an srcu_data structure (call it
*sdp) is recorded pending on sdp->mynode->srcu_data_have_cbs in
srcu_funnel_gp_start() with sdp->mynode pointing to a deep leaf
(say 3 levels).
b) The grace period ends after rcu_init_geometry() shrinks the
nodes level to a single one. srcu_gp_end() walks through the new
srcu_node hierarchy without ever reaching the old leaves so the
callback is never executed.
This is easily reproduced on an 8 CPUs machine with CONFIG_NR_CPUS >= 32
and "rcupdate.rcu_self_test=1". The srcu_barrier() after early tests
verification never completes and the boot hangs:
[ 5413.141029] INFO: task swapper/0:1 blocked for more than 4915 seconds.
[ 5413.147564] Not tainted 5.12.0-rc4+ #28
[ 5413.151927] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 5413.159753] task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00004000
[ 5413.168099] Call Trace:
[ 5413.170555] __schedule+0x36c/0x930
[ 5413.174057] ? wait_for_completion+0x88/0x110
[ 5413.178423] schedule+0x46/0xf0
[ 5413.181575] schedule_timeout+0x284/0x380
[ 5413.185591] ? wait_for_completion+0x88/0x110
[ 5413.189957] ? mark_held_locks+0x61/0x80
[ 5413.193882] ? mark_held_locks+0x61/0x80
[ 5413.197809] ? _raw_spin_unlock_irq+0x24/0x50
[ 5413.202173] ? wait_for_completion+0x88/0x110
[ 5413.206535] wait_for_completion+0xb4/0x110
[ 5413.210724] ? srcu_torture_stats_print+0x110/0x110
[ 5413.215610] srcu_barrier+0x187/0x200
[ 5413.219277] ? rcu_tasks_verify_self_tests+0x50/0x50
[ 5413.224244] ? rdinit_setup+0x2b/0x2b
[ 5413.227907] rcu_verify_early_boot_tests+0x2d/0x40
[ 5413.232700] do_one_initcall+0x63/0x310
[ 5413.236541] ? rdinit_setup+0x2b/0x2b
[ 5413.240207] ? rcu_read_lock_sched_held+0x52/0x80
[ 5413.244912] kernel_init_freeable+0x253/0x28f
[ 5413.249273] ? rest_init+0x250/0x250
[ 5413.252846] kernel_init+0xa/0x110
[ 5413.256257] ret_from_fork+0x22/0x30
2) An srcu_struct structure that is initialized before rcu_init_geometry()
and used afterward will always have stale rdp->mynode references,
resulting in callbacks to be missed in srcu_gp_end(), just like in
the previous scenario.
This commit therefore causes init_srcu_struct_nodes to initialize the
geometry, if needed. This ensures that the srcu_node hierarchy is
properly built and distributed from the get-go.
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Once srcu_init() is called, the SRCU core will make use of delayed
workqueues, which rely on timers. However init_timers() is called
several steps after rcu_init(). This means that a call_srcu() after
rcu_init() but before init_timers() would find itself within a dangerously
uninitialized timer core.
This commit therefore creates a separate call to srcu_init() after
init_timer() completes, which ensures that we stay in early SRCU mode
until timers are safe(r).
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Since struct lockdep_map has zero size when CONFIG_DEBUG_LOCK_ALLOC=n,
this commit removes the #ifdef from the srcu_struct structure's ->dep_map.
This change will simplify further manipulations of this field.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Pre-srcu_init() invocations of call_srcu() initialize the srcu_struct
structure in question, so there is no need to check this initialization
in srcu_init() when initiating grace periods for srcu_struct structures
that had early call_srcu() invocations. This commit therefore drops
the calls to check_init_srcu_struct() in srcu_init().
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because alloc_percpu() zeroes out the allocated memory, there is no need
to zero-fill newly allocated per-CPU memory. This commit therefore removes
the loop zeroing the ->srcu_lock_count and ->srcu_unlock_count arrays
from init_srcu_struct_nodes(). This is the only use of that function's
is_static parameter, which this commit also removes.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Uladzislau Rezki <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This reverts commit dcd42591eb.
The only user was RCU/nocb.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently each CPU has its own ->nocb_timer queued when the nocb_gp
wakeup must be deferred. This approach has many drawbacks, compared to
a solution based on a single timer per NOCB group:
* There are a lot of timers to maintain.
* The per-rdp ->nocb_lock must be held to queue and cancel the timer
and this lock can already be heavily contended.
* One timer firing doesn't cancel the other timers in the same group:
- These other timers can thus cause spurious wakeups
- Each rdp that queued a timer must lock both ->nocb_lock and then
->nocb_gp_lock upon exit from the kernel to idle/user/guest mode.
* We can't cancel all of them if we detect an unflushed bypass in
nocb_gp_wait(). In fact currently we only ever cancel the ->nocb_timer
of the leader group.
* The leader group's nocb_timer is cancelled without locking ->nocb_lock
in nocb_gp_wait(). This currently appears to be safe but is an
accident waiting to happen.
* Since the timer acquires ->nocb_lock, it requires extra care in the
NOCB (de-)offloading process, requiring that it be either enabled or
disabled and then flushed.
This commit instead uses the rcuog kthread's CPU's ->nocb_timer instead.
It is protected by nocb_gp_lock, which is _way_ less contended and
remains so even after this change. As a matter of fact, the nocb_timer
almost never fires and the deferred wakeup is mostly carried out upon
idle/user/guest entry. Now the early check performed at this point in
do_nocb_deferred_wakeup() is done on rdp_gp->nocb_defer_wakeup, which
is of course racy. However, this raciness is harmless because we only
need the guarantee that the timer is queued if we were the last one to
queue it. Any other situation (another CPU has queued it and we either
see it or not) is fine.
This solves all the issues listed above.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently we have three functions which depend on each other.
Two of them are quite tiny and the last one where the most
work is done. All of them are related to queuing RCU batches
to reclaim objects after a GP.
1. kfree_rcu_monitor(). It consist of few lines. It acquires a spin-lock
and calls kfree_rcu_drain_unlock().
2. kfree_rcu_drain_unlock(). It also consists of few lines of code. It
calls queue_kfree_rcu_work() to queue the batch. If this fails,
it rearms the monitor work to try again later.
3. queue_kfree_rcu_work(). This provides the bulk of the functionality,
attempting to start a new batch to free objects after a GP.
Since there are no external users of functions [2] and [3], both
can eliminated by moving all logic directly into [1], which both
shrinks and simplifies the code.
Also replace comments which start with "/*" to "//" format to make it
unified across the file.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>