Commit graph

1,169,205 commits

Author SHA1 Message Date
Sebastian Reichel
94dfec48fc drm/imx: Add 8 pixel alignment fix
Some standard resolutions like 1366x768 do not work properly with
i.MX6 SoCs, since the horizontal resolution needs to be aligned
to 8 pixels (so 1360x768 or 1368x768 would work).

This patch allocates framebuffers allocated to 8 pixels. The extra
time required to send the extra pixels are removed from the blank
time. In order to expose the correct display size to userspace,
the stride is increased without increasing the width.

Without this patch systems with this display resolution hang
indefinitely during boot up.

Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20210428222953.235280-3-sebastian.reichel@collabora.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2021-05-10 16:39:54 +02:00
Jiapeng Chong
58cb138e20 dmaengine: idxd: Remove redundant variable cdev_ctx
Variable cdev_ctx is set to '&ictx[wq->idxd->data->type]' but this
value is not used, hence it is a redundant assignment and can be
removed.

Clean up the following clang-analyzer warning:

drivers/dma/idxd/cdev.c:300:2: warning: Value stored to 'cdev_ctx' is
never read [clang-analyzer-deadcode.DeadStores].

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/1620298847-33127-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-10 20:04:31 +05:30
Greg Kroah-Hartman
ba2b062ffa This tag contains the following fixes for 5.13-rc2:
- Expose PLL information per ASIC. This also fixes some casting warnings.
 - Skip reading further firmware errors in case PCI link is down.
 - Security firmware error should be handled as error and not warning.
 - Allow user to ignore firmware errors.
 - Fix bug in timeout calculation when waiting for interrupt of CS.
 - Fix bug of potential use-after-free.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEE7TEboABC71LctBLFZR1NuKta54AFAmCWTaoTHG9nYWJiYXlA
 a2VybmVsLm9yZwAKCRBlHU24q1rngMgUB/4gep0fP5vP71R4vsjdlKFkuf/1+b9/
 oUJbI5ujWLuJGJpxpv1pZfy/miT4hOIYgxR5jRXa7NJMabW4+PBO7lufif9nsFb9
 D4BG/2hAWJLoSdmSlNaRhswScDVjfQBpQPtKBUZPs7YOebNjVCdXBoFwKSFHeWV/
 L3zs2/zelCqz8l+F3UFi7Pix+SZCOruah9iAPQaluhQvYEiz6BH5mnz+rm2v7X/X
 0/ySpKmtpBcRiL736s9tAZpGjgkfT6Ujdv4qWywX6YPVndoaWLbZlkwm/FGH9SwL
 KLE9bx0xi9u1b8bVN4OltV37g4cH7dqfktXYS0AP4S2lnjTkMCoUmzu0
 =7Lkr
 -----END PGP SIGNATURE-----

Merge tag 'misc-habanalabs-fixes-2021-05-08' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into char-misc-linus

Oded writes:

This tag contains the following fixes for 5.13-rc2:

- Expose PLL information per ASIC. This also fixes some casting warnings.
- Skip reading further firmware errors in case PCI link is down.
- Security firmware error should be handled as error and not warning.
- Allow user to ignore firmware errors.
- Fix bug in timeout calculation when waiting for interrupt of CS.
- Fix bug of potential use-after-free.

* tag 'misc-habanalabs-fixes-2021-05-08' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux:
  habanalabs/gaudi: Fix a potential use after free in gaudi_memset_device_memory
  habanalabs: wait for interrupt wrong timeout calculation
  habanalabs: ignore f/w status error
  habanalabs: change error level of security not ready
  habanalabs: skip reading f/w errors on bad status
  habanalabs: expose ASIC specific PLL index
2021-05-10 16:30:03 +02:00
Christophe JAILLET
8c721cb0f7 quota: Use 'hlist_for_each_entry' to simplify code
Use 'hlist_for_each_entry' instead of hand writing it.
This saves a few lines of code.

Link: https://lore.kernel.org/r/f82d3e33964dcbd2aac19866735e0a8381c8a735.1619599407.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jan Kara <jack@suse.cz>
2021-05-10 16:27:49 +02:00
Jan Kara
b577750e41 MAINTAINERS: Add Matthew Bobrowski as a reviewer
Matthew helps with fanotify already for some time and he'd like to do
more so let's add him as a reviewer.

CC: Matthew Bobrowski <repnop@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2021-05-10 16:27:41 +02:00
Saravana Kannan
28ec344bb8 usb: typec: tcpm: Don't block probing of consumers of "connector" nodes
fw_devlink expects DT device nodes with "compatible" property to have
struct devices created for them. Since the connector node might not be
populated as a device, mark it as such so that fw_devlink knows not to
wait on this fwnode being populated as a struct device.

Without this patch, USB functionality can be broken on some boards.

Fixes: f7514a6630 ("of: property: fw_devlink: Add support for remote-endpoint")
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20210506004423.345199-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 16:22:27 +02:00
Chunfeng Yun
4676be28a4 usb: xhci-mtk: use first-fit for LS/FS
Use first-fit instead of best-fit for LS/FS devices under TT,
we found that best-fit will consume more bandwidth for some
cases.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210507021127.54717-4-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 16:21:49 +02:00
Ikjoon Jang
bb8d7ef68e usb: xhci-mtk: remove unnecessary assignments in periodic TT scheduler
Remove unnecessary variables in check_sch_bw().
No functional changes, just for better readability.

Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210507021127.54717-3-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 16:21:49 +02:00
Chunfeng Yun
e56e60f7a9 usb: xhci-mtk: remove unnecessary setting of has_ippc
Due to @has_ippc's default value is 0, no need set it again if fail
to get ippc base address

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210507021127.54717-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 16:21:49 +02:00
Chunfeng Yun
40ddb76ba0 usb: xhci-mtk: use bitfield instead of bool
Use bitfield instead of bool in struct

Refer to coding-style.rst 17) Using bool:
"If a structure has many true/false values, consider consolidating
them into a bitfield with 1 bit members, or using an appropriate
fixed width type, such as u8."

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20210507021127.54717-1-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 16:21:48 +02:00
Saurav Girepunje
3c5e0d0e9d usb: musb: Remove unused function argument dma, qh, offset, length
Remove unused function argument dma, qh, offset, length from
musb_tx_dma_set_mode_cppi_tusb() in musb_host.c

Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/20210508170317.24403-3-saurav.girepunje@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 16:21:09 +02:00
Saurav Girepunje
6cfe9036ac usb: musb: Remove unused local variable dma, urb, offset
Remove unused function argument struct dma_controller *dma,
struct urb *urb and u32 offset from musb_tx_dma_set_mode_mentor.

Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/20210508170317.24403-2-saurav.girepunje@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 16:21:09 +02:00
Robin Gong
f0c07993af dmaengine: fsl-qdma: check dma_set_mask return value
For fix below warning reported by static code analysis tool like Coverity
from Synopsys:

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Addresses-Coverity-ID: 12285639 ("Unchecked return value")
Link: https://lore.kernel.org/r/1619427549-20498-1-git-send-email-yibin.gong@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-10 19:51:03 +05:30
Saurav Girepunje
cd783e5abb usb: musb: Remove duplicate declaration of functions
Remove duplicate declaration of below functions in musb_host.h
	musb_host_cleanup
	musb_host_tx
	musb_host_rx
	musb_root_disconnect

Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/20210508093512.GA11194@user
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 16:20:41 +02:00
Saurav Girepunje
0826dae3d8 usb: musb: Fix spelling mistake "tranfer" -> "transfer"
Fix spelling mistake "tranfer" -> "transfer" in musb_gadget.c file.

Signed-off-by: Saurav Girepunje <saurav.girepunje@gmail.com>
Link: https://lore.kernel.org/r/20210508072156.GA14656@user
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 16:20:37 +02:00
Dave Jiang
077cdb355b dmaengine: idxd: add missing dsa driver unregister
The idxd_unregister_driver() has never been called for the idxd driver upon
removal. Add fix to call unregister driver on module removal.

Fixes: c52ca47823 ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161947994449.1053102.13189942817915448216.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-10 19:48:12 +05:30
Dave Jiang
1c4841ccbd dmaengine: idxd: add engine 'struct device' missing bus type assignment
engine 'struct device' setup is missing assigning the bus type. Add it to
dsa_bus_type.

Fixes: 75b9113090 ("dmaengine: idxd: fix engine conf_dev lifetime")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/161947841562.984844.17505646725993659651.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-05-10 19:48:12 +05:30
Christophe JAILLET
d9ff1096a8 usb: musb: Fix an error message
'ret' is known to be 0 here.
Initialize 'ret' with the expected error code before using it.

Fixes: 0990366bab ("usb: musb: Add support for MediaTek musb controller")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/69f514dc7134e3c917cad208e73cc650cb9e2bd6.1620159879.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 16:17:57 +02:00
Lucas De Marchi
5a9d38b20a drm/i915/display: hide workaround for broken vbt in intel_bios.c
Instead of poluting the normal code path in intel_display.c, make
intel_bios.c handle the brokenness of the VBT.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430223808.1078010-5-lucas.demarchi@intel.com
2021-05-10 07:06:23 -07:00
Lucas De Marchi
097d9e9020 drm/i915/display: remove strap checks from gen 9
Direction on gen9+ was to stop reading the straps and only rely on the
VBT for marking the port presence. This happened while dealing with
WaIgnoreDDIAStrap and instead of using it as a WA, it should now be the
normal flow. See commit 885d3e5b6f ("drm/i915/display: fix comment on
skl straps").

For gen 10 it's hard to say if this will work or not since I can't test
it, so leave it with the same behavior as before.

For PCH_TGP we should still rely on the VBT to make ports E and F not
available.

v2 (Ville):
  - use display ver >= 9 to make it consistent with the rest of the
    driver instead of checking for == 9
  - also handle CNL and only initialize port F if it is
    IS_CNL_WITH_PORT_F. Eventually CNL may be removed, but while it
    isn't let's keep it consistent everywhere

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430223808.1078010-4-lucas.demarchi@intel.com
2021-05-10 07:06:22 -07:00
Lucas De Marchi
ba9c5bf767 drm/i915/display: remove FIXME comment for intended feature
Direction on gen >= 9 was to stop using straps and rely on VBT
indicating if the port is present or not. Remove FIXME comment since
this will never be "fixed".

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430223808.1078010-3-lucas.demarchi@intel.com
2021-05-10 07:06:20 -07:00
Lucas De Marchi
a5be0c978c drm/i915/display: move vbt check to intel_ddi_init()
Since commit 45c0673aac ("drm/i915/bios: start using the
intel_bios_encoder_data directly") we lookup the devdata for each port
in intel_ddi_init() and just return if the port is not present in VBT
(or if we didn't create a fake devdata for it if VBT is not available).

So in intel_display.c we don't have to check
intel_bios_is_port_present(), just rely on the check in
intel_ddi_init().

v2: Rebase on commit 45c0673aac ("drm/i915/bios: start using the
intel_bios_encoder_data directly") re-using that check in intel_ddi_init()
instead of adding a new one.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430223808.1078010-2-lucas.demarchi@intel.com
2021-05-10 07:06:19 -07:00
Kyle Tso
f1fbd950b5 usb: typec: tcpm: Fix wrong handling for Not_Supported in VDM AMS
Not_Supported Message is acceptable in VDM AMS. Redirect the VDM state
machine to VDM_STATE_DONE when receiving Not_Supported and finish the
VDM AMS.

Also, after the loop in vdm_state_machine_work, add more conditions of
VDM states to clear the vdm_sm_running flag because those are all
stopping states when leaving the loop.

In addition, finish the VDM AMS if the port partner responds BUSY.

Fixes: 8dea75e113 ("usb: typec: tcpm: Protocol Error handling")
Fixes: 8d3a0578ad ("usb: typec: tcpm: Respond Wait if VDM state machine is running")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210507062300.1945009-3-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 15:52:06 +02:00
Kyle Tso
c34e85fa69 usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work
In current design, DISCOVER_IDENTITY is queued to VDM state machine
immediately in Ready states and never retries if it fails in the AMS.
Move the process to a delayed work so that when it fails for some
reasons (e.g. Sink Tx No Go), it can be retried by queueing the work
again. Also fix a problem that the vdm_state is not set to a proper
state if it is blocked by Collision Avoidance mechanism.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Link: https://lore.kernel.org/r/20210507062300.1945009-2-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 15:52:06 +02:00
Jack Pham
1f4642b72b usb: typec: ucsi: Retrieve all the PDOs instead of just the first 4
commit 4dbc6a4ef0 ("usb: typec: ucsi: save power data objects
in PD mode") introduced retrieval of the PDOs when connected to a
PD-capable source. But only the first 4 PDOs are received since
that is the maximum number that can be fetched at a time given the
MESSAGE_IN length limitation (16 bytes). However, as per the PD spec
a connected source may advertise up to a maximum of 7 PDOs.

If such a source is connected it's possible the PPM could have
negotiated a power contract with one of the PDOs at index greater
than 4, and would be reflected in the request data object's (RDO)
object position field. This would result in an out-of-bounds access
when the rdo_index() is used to index into the src_pdos array in
ucsi_psy_get_voltage_now().

With the help of the UBSAN -fsanitize=array-bounds checker enabled
this exact issue is revealed when connecting to a PD source adapter
that advertise 5 PDOs and the PPM enters a contract having selected
the 5th one.

[  151.545106][   T70] Unexpected kernel BRK exception at EL1
[  151.545112][   T70] Internal error: BRK handler: f2005512 [#1] PREEMPT SMP
...
[  151.545499][   T70] pc : ucsi_psy_get_prop+0x208/0x20c
[  151.545507][   T70] lr : power_supply_show_property+0xc0/0x328
...
[  151.545542][   T70] Call trace:
[  151.545544][   T70]  ucsi_psy_get_prop+0x208/0x20c
[  151.545546][   T70]  power_supply_uevent+0x1a4/0x2f0
[  151.545550][   T70]  dev_uevent+0x200/0x384
[  151.545555][   T70]  kobject_uevent_env+0x1d4/0x7e8
[  151.545557][   T70]  power_supply_changed_work+0x174/0x31c
[  151.545562][   T70]  process_one_work+0x244/0x6f0
[  151.545564][   T70]  worker_thread+0x3e0/0xa64

We can resolve this by instead retrieving and storing up to the
maximum of 7 PDOs in the con->src_pdos array. This would involve
two calls to the GET_PDOS command.

Fixes: 992a60ed0d ("usb: typec: ucsi: register with power_supply class")
Fixes: 4dbc6a4ef0 ("usb: typec: ucsi: save power data objects in PD mode")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210503074611.30973-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 15:51:57 +02:00
Thomas Zimmermann
04dfe19a5e drm: Mark AGP implementation and ioctls as legacy
Only UMs drivers use DRM's core AGP code and ioctls. Mark the icotls
as legacy. Add the _legacy_ infix to all AGP functions. Move the
declarations to the public and internal legacy header files. The agp
field in struct drm_device is now located in the structure's legacy
section. Adapt drivers to the changes.

AGP code now depends on CONFIG_DRM_LEGACY.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507185709.22797-5-tzimmermann@suse.de
2021-05-10 15:46:58 +02:00
Thomas Zimmermann
6bff227983 drm: Mark PCI AGP helpers as legacy
DRM's AGP helpers for PCI are only required by legacy drivers. Put them
behind CONFIG_DRM_LEGACY and add the _legacy_ infix.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507185709.22797-4-tzimmermann@suse.de
2021-05-10 15:46:54 +02:00
Thomas Zimmermann
43359786a5 drm/radeon: Move AGP data structures into radeon
With the AGP code already duplicated, move over the AGP structures
from the legacy code base in to radeon. The AGP data structures that
are required by radeon are now declared within the driver. The AGP
instance is stored in struct radeon_device.agp.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507185709.22797-3-tzimmermann@suse.de
2021-05-10 15:46:50 +02:00
Thomas Zimmermann
cf241e872f drm/radeon: Move AGP helpers into radeon driver
Radeon calls DRMs core AGP helpers. These helpers are only required
by legacy drivers. Reimplement the code in radeon to uncouple radeon
from the legacy code.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210507185709.22797-2-tzimmermann@suse.de
2021-05-10 15:46:15 +02:00
Václav Kubernát
2d101db3e5 hwmon: (pmbus/fsp-3y) Fix FSP-3Y YH-5151E non-compliant vout encoding
I didn't properly test the driver for YH-5151E, so it was completely
broken. Firstly, the log/real mapping was incorrect in one case.
Secondly, PMBus specifies that output voltages should be in the linear16
encoding. However, the YH-5151E is non-compliant and uses linear11.
YM-2151E isn't affected by this. Fix this by converting the values
inside the read functions. linear16 gets the exponent from the VOUT_MODE
command. The device doesn't support it, so I have to manually supply the
value for it.

Both supported devices have now been tested to report correct vout
values.

Fixes: 1734b4135a ("hwmon: Add driver for fsp-3y PSUs and PDUs")
Signed-off-by: Václav Kubernát <kubernat@cesnet.cz>
Link: https://lore.kernel.org/r/20210429075337.110502-1-kubernat@cesnet.cz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-10 06:27:33 -07:00
Eddie James
5216dff22d hwmon: (occ) Fix poll rate limiting
The poll rate limiter time was initialized at zero. This breaks the
comparison in time_after if jiffies is large. Switch to storing the
next update time rather than the previous time, and initialize the
time when the device is probed.

Fixes: c10e753d43 ("hwmon (occ): Add sensor types and versions")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210429151336.18980-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-10 06:27:33 -07:00
Wan Jiabing
726c945ab2 hwmon: (corsair-psu) Remove unneeded semicolons
Fix the following coccicheck warning:

./drivers/hwmon/corsair-psu.c:379:2-3: Unneeded semicolon

Remove unneeded semicolons.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20210427044219.7799-1-wanjiabing@vivo.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-05-10 06:27:33 -07:00
Geert Uytterhoeven
5b44955dc1 irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
The Apple Interrupt Controller is only present on Apple Silicon SoCs.
Hence add a dependency on ARCH_APPLE, to prevent asking the user about
this driver when configuring a kernel without Apple Silicon SoC support.

Drop the default, as ARCH_APPLE already selects APPLE_AIC.

Fixes: 76cde26394 ("irqchip/apple-aic: Add support for the Apple Interrupt Controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/f37e8daea37d50651d2164b0b3dad90780188548.1618316398.git.geert+renesas@glider.be
2021-05-10 14:12:48 +01:00
Marc Zyngier
be1c2bb3ba ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
The Mainstone PXA platform uses CONFIG_SPARSE_IRQ, and thus we
cannot rely on the irq descriptors to be readilly allocated
before creating the irqdomain in legacy mode. The kernel then
complains loudly about not being able to associate the interrupt
in the domain -- can't blame it.

Fix it by allocating the irqdescs upfront in the legacy case.

Fixes: b68761da01 ("ARM: PXA: Kill use of irq_create_strict_mappings()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210426223942.GA213931@roeck-us.net
2021-05-10 14:12:25 +01:00
Christophe JAILLET
a60a34366e usb: fotg210-hcd: Fix an error message
'retval' is known to be -ENODEV here.
This is a hard-coded default error code which is not useful in the error
message. Moreover, another error message is printed at the end of the
error handling path. The corresponding error code (-ENOMEM) is more
informative.

So remove simplify the first error message.

While at it, also remove the useless initialization of 'retval'.

Fixes: 7d50195f6c ("usb: host: Faraday fotg210-hcd driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/94531bcff98e46d4f9c20183a90b7f47f699126c.1620333419.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 15:09:14 +02:00
Wei Ming Chen
f752978534 docs: usb: function: Modify path name
Original path does not exists, so changed to
"Documentation/ABI/testing/configfs-usb-gadget"

Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com>
Link: https://lore.kernel.org/r/20210506122020.7117-1-jj251510319013@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 15:06:38 +02:00
Marcel Hamer
e17b02d497 usb: dwc3: omap: improve extcon initialization
When extcon is used in combination with dwc3, it is assumed that the dwc3
registers are untouched and as such are only configured if VBUS is valid
or ID is tied to ground.

In case VBUS is not valid or ID is floating, the registers are not
configured as such during driver initialization, causing a wrong
default state during boot.

If the registers are not in a default state, because they are for
instance touched by a boot loader, this can cause for a kernel error.

Signed-off-by: Marcel Hamer <marcel@solidxs.se>
Link: https://lore.kernel.org/r/20210427122118.1948340-1-marcel@solidxs.se
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 15:04:37 +02:00
Andy Shevchenko
b9a0866a5b usb: typec: ucsi: Put fwnode in any case during ->probe()
device_for_each_child_node() bumps a reference counting of a returned variable.
We have to balance it whenever we return to the caller.

Fixes: c1b0bc2dab ("usb: typec: Add support for UCSI interface")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210504222337.3151726-1-andy.shevchenko@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 15:02:13 +02:00
Colin Ian King
af0e1871d7 iio: tsl2583: Fix division by a zero lux_val
The lux_val returned from tsl2583_get_lux can potentially be zero,
so check for this to avoid a division by zero and an overflowed
gain_trim_val.

Fixes clang scan-build warning:

drivers/iio/light/tsl2583.c:345:40: warning: Either the
condition 'lux_val<0' is redundant or there is division
by zero at line 345. [zerodivcond]

Fixes: ac4f6eee8f ("staging: iio: TAOS tsl258x: Device driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10 14:01:48 +01:00
Alexandru Ardelean
af0670b0bf iio: core: return ENODEV if ioctl is unknown
When the ioctl() mechanism was introduced in IIO core to centralize the
registration of all ioctls in one place via commit 8dedcc3eee ("iio:
core: centralize ioctl() calls to the main chardev"), the return code was
changed from ENODEV to EINVAL, when the ioctl code isn't known.

This was done by accident.

This change reverts back to the old behavior, where if the ioctl() code
isn't known, ENODEV is returned (vs EINVAL).

This was brought into perspective by this patch:
  https://lore.kernel.org/linux-iio/20210428150815.136150-1-paul@crapouillou.net/

Fixes: 8dedcc3eee ("iio: core: centralize ioctl() calls to the main chardev")
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10 14:01:48 +01:00
Tomasz Duszynski
901f84de0e iio: core: fix ioctl handlers removal
Currently ioctl handlers are removed twice. For the first time during
iio_device_unregister() then later on inside
iio_device_unregister_eventset() and iio_buffers_free_sysfs_and_mask().
Double free leads to kernel panic.

Fix this by not touching ioctl handlers list directly but rather
letting code responsible for registration call the matching cleanup
routine itself.

Fixes: 8dedcc3eee ("iio: core: centralize ioctl() calls to the main chardev")
Signed-off-by: Tomasz Duszynski <tomasz.duszynski@octakon.com>
Acked-by: Alexandru Ardelean <ardeleanalex@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210423080244.2790-1-tomasz.duszynski@octakon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10 14:01:48 +01:00
Dmitry Osipenko
f73c730774 iio: gyro: mpu3050: Fix reported temperature value
The raw temperature value is a 16-bit signed integer. The sign casting
is missing in the code, which results in a wrong temperature reported
by userspace tools, fix it.

Cc: stable@vger.kernel.org
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Datasheet: https://www.cdiweb.com/datasheets/invensense/mpu-3000a.pdf
Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Asus TF201
Reported-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Andy Shevchenko <Andy.Shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Link: https://lore.kernel.org/r/20210423020959.5023-1-digetx@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10 14:01:48 +01:00
Alexandru Ardelean
7061803522 iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
During commit 067fda1c06 ("iio: hid-sensors: move triggered buffer
setup into hid_sensor_setup_trigger"), the
iio_triggered_buffer_{setup,cleanup}() functions got moved under the
hid-sensor-trigger module.

The above change works fine, if any of the sensors get built. However, when
only the common hid-sensor-trigger module gets built (and none of the
drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced.

Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER
symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the
hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets
selected.

All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this
change removes the IIO_TRIGGERED_BUFFER enforcement from each driver.

Fixes: 067fda1c06 ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger")
Reported-by: Thomas Deutschmann <whissi@gentoo.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10 14:01:48 +01:00
Dinghao Liu
a2fa9242e8 iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
When lidar_write_control() fails, a pairing PM usage counter
decrement is needed to keep the counter balanced.

Fixes: 4ac4e086fd ("iio: pulsedlight-lidar-lite: add runtime PM")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20210412053204.4889-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10 14:01:48 +01:00
Dinghao Liu
8edb79af88 iio: light: gp2ap002: Fix rumtime PM imbalance on error
When devm_request_threaded_irq() fails, we should decrease the
runtime PM counter to keep the counter balanced. But when
iio_device_register() fails, we need not to decrease it because
we have already decreased it before.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 97d642e230 ("iio: light: Add a driver for Sharp GP2AP002x00F")
Link: https://lore.kernel.org/r/20210407034927.16882-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-05-10 14:01:48 +01:00
Kyle Tso
2e2b8d15ad usb: typec: tcpm: Fix wrong handling in GET_SINK_CAP
After receiving Sink Capabilities Message in GET_SINK_CAP AMS, it is
incorrect to call tcpm_pd_handle_state because the Message is expected
and the current state is not Ready states. The result of this incorrect
operation ends in Soft Reset which is definitely wrong. Simply
forwarding to Ready States is enough to finish the AMS.

Fixes: 8dea75e113 ("usb: typec: tcpm: Protocol Error handling")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kyle Tso <kyletso@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210503171849.2605302-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 15:00:03 +02:00
Matthijs Kooijman
e89baeba4f usb: dwc2: Remove obsolete MODULE_ constants from platform.c
Originally, the core and platform drivers were separate modules, so each
had its own module info. Since commit 2d1165a4b9 (usb: dwc2: remove
dwc2_platform.ko) platform.c is included in the core module, which now
contains duplicate module info (from core.c and platform.c).

Due to the linking order and modinfo implementation, running `modinfo`
on the resulting dwc2.ko shows just the info from platform.c, rather
than that from core.c, suggesting that I am the author of the entire
dwc2 module. Since platform.c is just a minor part of the entire module,
this removes its module info in favor of the info from core.c.

Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Link: https://lore.kernel.org/r/20210503180538.64423-1-matthijs@stdin.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 14:59:05 +02:00
Zhen Lei
0b2b149e91 usb: dwc3: imx8mp: fix error return code in dwc3_imx8mp_probe()
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.

Fixes: 6dd2565989 ("usb: dwc3: add imx8mp dwc3 glue layer driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210508015310.1627-1-thunder.leizhen@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 14:58:41 +02:00
Li Jun
b96992081f usb: dwc3: imx8mp: detect dwc3 core node via compatible string
New schema of usb controller DT-node should be named with prefix
"^usb(@.*)?", dt changed the node name, but missed counter part
change in driver, fix it by switching to use compatible string as
the dwc3 core compatible string keeps "snps,dwc3" in all dt.

Fixes: d1689cd3c0 ("arm64: dts: imx8mp: Use the correct name for child node "snps, dwc3"")
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1619765836-20387-1-git-send-email-jun.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 14:57:37 +02:00
Wesley Cheng
18ffa988db usb: dwc3: gadget: Return success always for kick transfer in ep queue
If an error is received when issuing a start or update transfer
command, the error handler will stop all active requests (including
the current USB request), and call dwc3_gadget_giveback() to notify
function drivers of the requests which have been stopped.  Avoid
returning an error for kick transfer during EP queue, to remove
duplicate cleanup operations on the request being queued.

Fixes: 8d99087c2d ("usb: dwc3: gadget: Properly handle failed kick_transfer")
cc: stable@vger.kernel.org
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1620410119-24971-1-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-10 14:54:48 +02:00